blob: f2dea5626cbb1189bb05091591dce8d9c03f5aba [file] [log] [blame]
Suneel Garapati5c2c3e82020-05-26 14:13:07 +02001// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2018 Marvell International Ltd.
4 */
5
Suneel Garapati5c2c3e82020-05-26 14:13:07 +02006#include <clk.h>
7#include <dm.h>
8#include <i2c.h>
Stefan Roeseaf03bde2020-07-23 14:09:36 +02009#include <time.h>
Suneel Garapati5c2c3e82020-05-26 14:13:07 +020010#include <asm/io.h>
11#include <linux/bitfield.h>
12#include <linux/compat.h>
13#include <linux/delay.h>
14
15#define TWSI_SW_TWSI 0x00
16#define TWSI_TWSI_SW 0x08
17#define TWSI_INT 0x10
18#define TWSI_SW_TWSI_EXT 0x18
19
20#define TWSI_SW_DATA_MASK GENMASK_ULL(31, 0)
21#define TWSI_SW_EOP_IA_MASK GENMASK_ULL(34, 32)
22#define TWSI_SW_IA_MASK GENMASK_ULL(39, 35)
23#define TWSI_SW_ADDR_MASK GENMASK_ULL(49, 40)
24#define TWSI_SW_SCR_MASK GENMASK_ULL(51, 50)
25#define TWSI_SW_SIZE_MASK GENMASK_ULL(54, 52)
26#define TWSI_SW_SOVR BIT_ULL(55)
27#define TWSI_SW_R BIT_ULL(56)
28#define TWSI_SW_OP_MASK GENMASK_ULL(60, 57)
29#define TWSI_SW_EIA GENMASK_ULL(61)
30#define TWSI_SW_SLONLY BIT_ULL(62)
31#define TWSI_SW_V BIT_ULL(63)
32
33#define TWSI_INT_SDA_OVR BIT_ULL(8)
34#define TWSI_INT_SCL_OVR BIT_ULL(9)
35#define TWSI_INT_SDA BIT_ULL(10)
36#define TWSI_INT_SCL BIT_ULL(11)
37
38enum {
39 TWSI_OP_WRITE = 0,
40 TWSI_OP_READ = 1,
41};
42
43enum {
44 TWSI_EOP_SLAVE_ADDR = 0,
45 TWSI_EOP_CLK_CTL = 3,
46 TWSI_SW_EOP_IA = 6,
47};
48
49enum {
50 TWSI_SLAVEADD = 0,
51 TWSI_DATA = 1,
52 TWSI_CTL = 2,
53 TWSI_CLKCTL = 3,
54 TWSI_STAT = 3,
55 TWSI_SLAVEADD_EXT = 4,
56 TWSI_RST = 7,
57};
58
59enum {
60 TWSI_CTL_AAK = BIT(2),
61 TWSI_CTL_IFLG = BIT(3),
62 TWSI_CTL_STP = BIT(4),
63 TWSI_CTL_STA = BIT(5),
64 TWSI_CTL_ENAB = BIT(6),
65 TWSI_CTL_CE = BIT(7),
66};
67
68/*
69 * Internal errors. When debugging is enabled, the driver will report the
70 * error number and the user / developer can check the table below for the
71 * detailed error description.
72 */
73enum {
74 /** Bus error */
75 TWSI_STAT_BUS_ERROR = 0x00,
76 /** Start condition transmitted */
77 TWSI_STAT_START = 0x08,
78 /** Repeat start condition transmitted */
79 TWSI_STAT_RSTART = 0x10,
80 /** Address + write bit transmitted, ACK received */
81 TWSI_STAT_TXADDR_ACK = 0x18,
82 /** Address + write bit transmitted, /ACK received */
83 TWSI_STAT_TXADDR_NAK = 0x20,
84 /** Data byte transmitted in master mode, ACK received */
85 TWSI_STAT_TXDATA_ACK = 0x28,
86 /** Data byte transmitted in master mode, ACK received */
87 TWSI_STAT_TXDATA_NAK = 0x30,
88 /** Arbitration lost in address or data byte */
89 TWSI_STAT_TX_ARB_LOST = 0x38,
90 /** Address + read bit transmitted, ACK received */
91 TWSI_STAT_RXADDR_ACK = 0x40,
92 /** Address + read bit transmitted, /ACK received */
93 TWSI_STAT_RXADDR_NAK = 0x48,
94 /** Data byte received in master mode, ACK transmitted */
95 TWSI_STAT_RXDATA_ACK_SENT = 0x50,
96 /** Data byte received, NACK transmitted */
97 TWSI_STAT_RXDATA_NAK_SENT = 0x58,
98 /** Slave address received, sent ACK */
99 TWSI_STAT_SLAVE_RXADDR_ACK = 0x60,
100 /**
101 * Arbitration lost in address as master, slave address + write bit
102 * received, ACK transmitted
103 */
104 TWSI_STAT_TX_ACK_ARB_LOST = 0x68,
105 /** General call address received, ACK transmitted */
106 TWSI_STAT_RX_GEN_ADDR_ACK = 0x70,
107 /**
108 * Arbitration lost in address as master, general call address
109 * received, ACK transmitted
110 */
111 TWSI_STAT_RX_GEN_ADDR_ARB_LOST = 0x78,
112 /** Data byte received after slave address received, ACK transmitted */
113 TWSI_STAT_SLAVE_RXDATA_ACK = 0x80,
114 /** Data byte received after slave address received, /ACK transmitted */
115 TWSI_STAT_SLAVE_RXDATA_NAK = 0x88,
116 /**
117 * Data byte received after general call address received, ACK
118 * transmitted
119 */
120 TWSI_STAT_GEN_RXADDR_ACK = 0x90,
121 /**
122 * Data byte received after general call address received, /ACK
123 * transmitted
124 */
125 TWSI_STAT_GEN_RXADDR_NAK = 0x98,
126 /** STOP or repeated START condition received in slave mode */
127 TWSI_STAT_STOP_MULTI_START = 0xa0,
128 /** Slave address + read bit received, ACK transmitted */
129 TWSI_STAT_SLAVE_RXADDR2_ACK = 0xa8,
130 /**
131 * Arbitration lost in address as master, slave address + read bit
132 * received, ACK transmitted
133 */
134 TWSI_STAT_RXDATA_ACK_ARB_LOST = 0xb0,
135 /** Data byte transmitted in slave mode, ACK received */
136 TWSI_STAT_SLAVE_TXDATA_ACK = 0xb8,
137 /** Data byte transmitted in slave mode, /ACK received */
138 TWSI_STAT_SLAVE_TXDATA_NAK = 0xc0,
139 /** Last byte transmitted in slave mode, ACK received */
140 TWSI_STAT_SLAVE_TXDATA_END_ACK = 0xc8,
141 /** Second address byte + write bit transmitted, ACK received */
142 TWSI_STAT_TXADDR2DATA_ACK = 0xd0,
143 /** Second address byte + write bit transmitted, /ACK received */
144 TWSI_STAT_TXADDR2DATA_NAK = 0xd8,
145 /** No relevant status information */
146 TWSI_STAT_IDLE = 0xf8
147};
148
Tom Rini6e7df1d2023-01-10 11:19:45 -0500149#define CFG_SYS_I2C_OCTEON_SLAVE_ADDR 0x77
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200150
151enum {
152 PROBE_PCI = 0, /* PCI based probing */
153 PROBE_DT, /* DT based probing */
154};
155
156enum {
157 CLK_METHOD_OCTEON = 0,
158 CLK_METHOD_OCTEONTX2,
159};
160
161/**
162 * struct octeon_i2c_data - SoC specific data of this driver
163 *
164 * @probe: Probing of this SoC (DT vs PCI)
165 * @reg_offs: Register offset
166 * @thp: THP define for divider calculation
167 * @clk_method: Clock calculation method
168 */
169struct octeon_i2c_data {
170 int probe;
171 u32 reg_offs;
172 int thp;
173 int clk_method;
174};
175
176/**
177 * struct octeon_twsi - Private data of this driver
178 *
179 * @base: Base address of i2c registers
180 * @data: Pointer to SoC specific data struct
181 */
182struct octeon_twsi {
183 void __iomem *base;
184 const struct octeon_i2c_data *data;
185 struct clk clk;
186};
187
188static void twsi_unblock(void *base);
189static int twsi_stop(void *base);
190
191/**
192 * Returns true if we lost arbitration
193 *
194 * @code status code
195 * @final_read true if this is the final read operation
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100196 * Return: true if arbitration has been lost, false if it hasn't been lost.
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200197 */
198static int twsi_i2c_lost_arb(u8 code, int final_read)
199{
200 switch (code) {
201 case TWSI_STAT_TX_ARB_LOST:
202 case TWSI_STAT_TX_ACK_ARB_LOST:
203 case TWSI_STAT_RX_GEN_ADDR_ARB_LOST:
204 case TWSI_STAT_RXDATA_ACK_ARB_LOST:
205 /* Arbitration lost */
206 return -EAGAIN;
207
208 case TWSI_STAT_SLAVE_RXADDR_ACK:
209 case TWSI_STAT_RX_GEN_ADDR_ACK:
210 case TWSI_STAT_GEN_RXADDR_ACK:
211 case TWSI_STAT_GEN_RXADDR_NAK:
212 /* Being addressed as slave, should back off and listen */
213 return -EIO;
214
215 case TWSI_STAT_SLAVE_RXDATA_ACK:
216 case TWSI_STAT_SLAVE_RXDATA_NAK:
217 case TWSI_STAT_STOP_MULTI_START:
218 case TWSI_STAT_SLAVE_RXADDR2_ACK:
219 case TWSI_STAT_SLAVE_TXDATA_ACK:
220 case TWSI_STAT_SLAVE_TXDATA_NAK:
221 case TWSI_STAT_SLAVE_TXDATA_END_ACK:
222 /* Core busy as slave */
223 return -EIO;
224
225 case TWSI_STAT_RXDATA_ACK_SENT:
226 /* Ack allowed on pre-terminal bytes only */
227 if (!final_read)
228 return 0;
229 return -EAGAIN;
230
231 case TWSI_STAT_RXDATA_NAK_SENT:
232 /* NAK allowed on terminal byte only */
233 if (!final_read)
234 return 0;
235 return -EAGAIN;
236
237 case TWSI_STAT_TXDATA_NAK:
238 case TWSI_STAT_TXADDR_NAK:
239 case TWSI_STAT_RXADDR_NAK:
240 case TWSI_STAT_TXADDR2DATA_NAK:
241 return -EAGAIN;
242 }
243
244 return 0;
245}
246
247/**
248 * Writes to the MIO_TWS(0..5)_SW_TWSI register
249 *
250 * @base Base address of i2c registers
251 * @val value to write
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100252 * Return: 0 for success, otherwise error
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200253 */
254static u64 twsi_write_sw(void __iomem *base, u64 val)
255{
256 unsigned long start = get_timer(0);
257
258 val &= ~TWSI_SW_R;
259 val |= TWSI_SW_V;
260
261 debug("%s(%p, 0x%llx)\n", __func__, base, val);
262 writeq(val, base + TWSI_SW_TWSI);
263 do {
264 val = readq(base + TWSI_SW_TWSI);
265 } while ((val & TWSI_SW_V) && (get_timer(start) < 50));
266
267 if (val & TWSI_SW_V)
268 debug("%s: timed out\n", __func__);
269 return val;
270}
271
272/**
273 * Reads the MIO_TWS(0..5)_SW_TWSI register
274 *
275 * @base Base address of i2c registers
276 * @val value for eia and op, etc. to read
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100277 * Return: value of the register
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200278 */
279static u64 twsi_read_sw(void __iomem *base, u64 val)
280{
281 unsigned long start = get_timer(0);
282
283 val |= TWSI_SW_R | TWSI_SW_V;
284
285 debug("%s(%p, 0x%llx)\n", __func__, base, val);
286 writeq(val, base + TWSI_SW_TWSI);
287
288 do {
289 val = readq(base + TWSI_SW_TWSI);
290 } while ((val & TWSI_SW_V) && (get_timer(start) < 50));
291
292 if (val & TWSI_SW_V)
293 debug("%s: Error writing 0x%llx\n", __func__, val);
294
295 debug("%s: Returning 0x%llx\n", __func__, val);
296 return val;
297}
298
299/**
300 * Write control register
301 *
302 * @base Base address for i2c registers
303 * @data data to write
304 */
305static void twsi_write_ctl(void __iomem *base, u8 data)
306{
307 u64 val;
308
309 debug("%s(%p, 0x%x)\n", __func__, base, data);
310 val = data | FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CTL) |
311 FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
312 twsi_write_sw(base, val);
313}
314
315/**
316 * Reads the TWSI Control Register
317 *
318 * @base Base address for i2c
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100319 * Return: 8-bit TWSI control register
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200320 */
321static u8 twsi_read_ctl(void __iomem *base)
322{
323 u64 val;
324
325 val = FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CTL) |
326 FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
327 val = twsi_read_sw(base, val);
328
329 debug("%s(%p): 0x%x\n", __func__, base, (u8)val);
330 return (u8)val;
331}
332
333/**
334 * Read i2c status register
335 *
336 * @base Base address of i2c registers
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100337 * Return: value of status register
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200338 */
339static u8 twsi_read_status(void __iomem *base)
340{
341 u64 val;
342
343 val = FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_STAT) |
344 FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
345
346 return twsi_read_sw(base, val);
347}
348
349/**
350 * Waits for an i2c operation to complete
351 *
352 * @param base Base address of registers
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100353 * Return: 0 for success, 1 if timeout
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200354 */
355static int twsi_wait(void __iomem *base)
356{
357 unsigned long start = get_timer(0);
358 u8 twsi_ctl;
359
360 debug("%s(%p)\n", __func__, base);
361 do {
362 twsi_ctl = twsi_read_ctl(base);
363 twsi_ctl &= TWSI_CTL_IFLG;
364 } while (!twsi_ctl && get_timer(start) < 50);
365
366 debug(" return: %u\n", !twsi_ctl);
367 return !twsi_ctl;
368}
369
370/**
371 * Unsticks the i2c bus
372 *
373 * @base base address of registers
374 */
375static int twsi_start_unstick(void __iomem *base)
376{
377 twsi_stop(base);
378 twsi_unblock(base);
379
380 return 0;
381}
382
383/**
384 * Sends an i2c start condition
385 *
386 * @base base address of registers
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100387 * Return: 0 for success, otherwise error
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200388 */
389static int twsi_start(void __iomem *base)
390{
391 int ret;
392 u8 stat;
393
394 debug("%s(%p)\n", __func__, base);
395 twsi_write_ctl(base, TWSI_CTL_STA | TWSI_CTL_ENAB);
396 ret = twsi_wait(base);
397 if (ret) {
398 stat = twsi_read_status(base);
399 debug("%s: ret: 0x%x, status: 0x%x\n", __func__, ret, stat);
400 switch (stat) {
401 case TWSI_STAT_START:
402 case TWSI_STAT_RSTART:
403 return 0;
404 case TWSI_STAT_RXADDR_ACK:
405 default:
406 return twsi_start_unstick(base);
407 }
408 }
409
410 debug("%s: success\n", __func__);
411 return 0;
412}
413
414/**
415 * Sends an i2c stop condition
416 *
417 * @base register base address
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100418 * Return: 0 for success, -1 if error
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200419 */
420static int twsi_stop(void __iomem *base)
421{
422 u8 stat;
423
424 twsi_write_ctl(base, TWSI_CTL_STP | TWSI_CTL_ENAB);
425
426 stat = twsi_read_status(base);
427 if (stat != TWSI_STAT_IDLE) {
428 debug("%s: Bad status on bus@%p\n", __func__, base);
429 return -1;
430 }
431
432 return 0;
433}
434
435/**
436 * Writes data to the i2c bus
437 *
438 * @base register base address
439 * @slave_addr address of slave to write to
440 * @buffer Pointer to buffer to write
441 * @length Number of bytes in buffer to write
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100442 * Return: 0 for success, otherwise error
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200443 */
444static int twsi_write_data(void __iomem *base, u8 slave_addr,
445 u8 *buffer, unsigned int length)
446{
447 unsigned int curr = 0;
448 u64 val;
449 int ret;
450
451 debug("%s(%p, 0x%x, %p, 0x%x)\n", __func__, base, slave_addr,
452 buffer, length);
453 ret = twsi_start(base);
454 if (ret) {
455 debug("%s: Could not start BUS transaction\n", __func__);
456 return -1;
457 }
458
459 ret = twsi_wait(base);
460 if (ret) {
461 debug("%s: wait failed\n", __func__);
462 return ret;
463 }
464
465 val = (u32)(slave_addr << 1) | TWSI_OP_WRITE |
466 FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
467 FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
468 twsi_write_sw(base, val);
469 twsi_write_ctl(base, TWSI_CTL_ENAB);
470
471 debug("%s: Waiting\n", __func__);
472 ret = twsi_wait(base);
473 if (ret) {
474 debug("%s: Timed out writing slave address 0x%x to target\n",
475 __func__, slave_addr);
476 return ret;
477 }
478
479 ret = twsi_read_status(base);
480 debug("%s: status: 0x%x\n", __func__, ret);
481 if (ret != TWSI_STAT_TXADDR_ACK) {
482 debug("%s: status: 0x%x\n", __func__, ret);
483 twsi_stop(base);
484 return twsi_i2c_lost_arb(ret, 0);
485 }
486
487 while (curr < length) {
488 val = buffer[curr++] |
489 FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
490 FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
491 twsi_write_sw(base, val);
492 twsi_write_ctl(base, TWSI_CTL_ENAB);
493
494 debug("%s: Writing 0x%llx\n", __func__, val);
495
496 ret = twsi_wait(base);
497 if (ret) {
498 debug("%s: Timed out writing data to 0x%x\n",
499 __func__, slave_addr);
500 return ret;
501 }
502 ret = twsi_read_status(base);
503 debug("%s: status: 0x%x\n", __func__, ret);
504 }
505
506 debug("%s: Stopping\n", __func__);
507 return twsi_stop(base);
508}
509
510/**
511 * Manually clear the I2C bus and send a stop
512 *
513 * @base register base address
514 */
515static void twsi_unblock(void __iomem *base)
516{
517 int i;
518
519 for (i = 0; i < 9; i++) {
520 writeq(0, base + TWSI_INT);
521 udelay(5);
522 writeq(TWSI_INT_SCL_OVR, base + TWSI_INT);
523 udelay(5);
524 }
525 writeq(TWSI_INT_SCL_OVR | TWSI_INT_SDA_OVR, base + TWSI_INT);
526 udelay(5);
527 writeq(TWSI_INT_SDA_OVR, base + TWSI_INT);
528 udelay(5);
529 writeq(0, base + TWSI_INT);
530 udelay(5);
531}
532
533/**
534 * Performs a read transaction on the i2c bus
535 *
536 * @base Base address of twsi registers
537 * @slave_addr i2c bus address to read from
538 * @buffer buffer to read into
539 * @length number of bytes to read
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100540 * Return: 0 for success, otherwise error
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200541 */
542static int twsi_read_data(void __iomem *base, u8 slave_addr,
543 u8 *buffer, unsigned int length)
544{
545 unsigned int curr = 0;
546 u64 val;
547 int ret;
548
549 debug("%s(%p, 0x%x, %p, %u)\n", __func__, base, slave_addr,
550 buffer, length);
551 ret = twsi_start(base);
552 if (ret) {
553 debug("%s: start failed\n", __func__);
554 return ret;
555 }
556
557 ret = twsi_wait(base);
558 if (ret) {
559 debug("%s: wait failed\n", __func__);
560 return ret;
561 }
562
563 val = (u32)(slave_addr << 1) | TWSI_OP_READ |
564 FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
565 FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
566 twsi_write_sw(base, val);
567 twsi_write_ctl(base, TWSI_CTL_ENAB);
568
569 ret = twsi_wait(base);
570 if (ret) {
571 debug("%s: waiting for sending addr failed\n", __func__);
572 return ret;
573 }
574
575 ret = twsi_read_status(base);
576 debug("%s: status: 0x%x\n", __func__, ret);
577 if (ret != TWSI_STAT_RXADDR_ACK) {
578 debug("%s: status: 0x%x\n", __func__, ret);
579 twsi_stop(base);
580 return twsi_i2c_lost_arb(ret, 0);
581 }
582
583 while (curr < length) {
584 twsi_write_ctl(base, TWSI_CTL_ENAB |
585 ((curr < length - 1) ? TWSI_CTL_AAK : 0));
586
587 ret = twsi_wait(base);
588 if (ret) {
589 debug("%s: waiting for data failed\n", __func__);
590 return ret;
591 }
592
593 val = twsi_read_sw(base, val);
594 buffer[curr++] = (u8)val;
595 }
596
597 twsi_stop(base);
598
599 return 0;
600}
601
602/**
603 * Calculate the divisor values
604 *
605 * @speed Speed to set
606 * @m_div Pointer to M divisor
607 * @n_div Pointer to N divisor
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100608 * Return: 0 for success, otherwise error
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200609 */
610static void twsi_calc_div(struct udevice *bus, ulong sclk, unsigned int speed,
611 int *m_div, int *n_div)
612{
613 struct octeon_twsi *twsi = dev_get_priv(bus);
614 int thp = twsi->data->thp;
615 int tclk, fsamp;
616 int ndiv, mdiv;
617
618 if (twsi->data->clk_method == CLK_METHOD_OCTEON) {
619 tclk = sclk / (2 * (thp + 1));
620 } else {
621 /* Refclk src in mode register defaults to 100MHz clock */
622 sclk = 100000000; /* 100 Mhz */
623 tclk = sclk / (thp + 2);
624 }
625 debug("%s( io_clock %lu tclk %u)\n", __func__, sclk, tclk);
626
627 /*
628 * Compute the clocks M divider:
629 *
630 * TWSI freq = (core freq) / (10 x (M+1) x 2 * (thp+1) x 2^N)
631 * M = ((core freq) / (10 x (TWSI freq) x 2 * (thp+1) x 2^N)) - 1
632 *
633 * For OcteonTX2 -
634 * TWSI freq = (core freq) / (10 x (M+1) x (thp+2) x 2^N)
635 * M = ((core freq) / (10 x (TWSI freq) x (thp+2) x 2^N)) - 1
636 */
637 for (ndiv = 0; ndiv < 8; ndiv++) {
638 fsamp = tclk / (1 << ndiv);
639 mdiv = fsamp / speed / 10;
640 mdiv -= 1;
641 if (mdiv < 16)
642 break;
643 }
644
645 *m_div = mdiv;
646 *n_div = ndiv;
647}
648
649/**
650 * Init I2C controller
651 *
652 * @base Base address of twsi registers
653 * @slave_addr I2C slave address to configure this controller to
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100654 * Return: 0 for success, otherwise error
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200655 */
656static int twsi_init(void __iomem *base, int slaveaddr)
657{
658 u64 val;
659
660 debug("%s (%p, 0x%x)\n", __func__, base, slaveaddr);
661
662 val = slaveaddr << 1 |
663 FIELD_PREP(TWSI_SW_EOP_IA_MASK, 0) |
664 FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
665 TWSI_SW_V;
666 twsi_write_sw(base, val);
667
668 /* Set slave address */
669 val = slaveaddr |
670 FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_EOP_SLAVE_ADDR) |
671 FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
672 TWSI_SW_V;
673 twsi_write_sw(base, val);
674
675 return 0;
676}
677
678/**
679 * Transfers data over the i2c bus
680 *
681 * @bus i2c bus to transfer data over
682 * @msg Array of i2c messages
683 * @nmsgs Number of messages to send/receive
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100684 * Return: 0 for success, otherwise error
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200685 */
686static int octeon_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
687 int nmsgs)
688{
689 struct octeon_twsi *twsi = dev_get_priv(bus);
690 int ret;
691 int i;
692
693 debug("%s: %d messages\n", __func__, nmsgs);
694 for (i = 0; i < nmsgs; i++, msg++) {
695 debug("%s: chip=0x%x, len=0x%x\n", __func__, msg->addr,
696 msg->len);
697
698 if (msg->flags & I2C_M_RD) {
699 debug("%s: Reading data\n", __func__);
700 ret = twsi_read_data(twsi->base, msg->addr,
701 msg->buf, msg->len);
702 } else {
703 debug("%s: Writing data\n", __func__);
704 ret = twsi_write_data(twsi->base, msg->addr,
705 msg->buf, msg->len);
706 }
707 if (ret) {
708 debug("%s: error sending\n", __func__);
709 return -EREMOTEIO;
710 }
711 }
712
713 return 0;
714}
715
716/**
717 * Set I2C bus speed
718 *
719 * @bus i2c bus to transfer data over
720 * @speed Speed in Hz to set
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100721 * Return: 0 for success, otherwise error
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200722 */
723static int octeon_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
724{
725 struct octeon_twsi *twsi = dev_get_priv(bus);
726 int m_div, n_div;
727 ulong clk_rate;
728 u64 val;
729
730 debug("%s(%p, %u)\n", __func__, bus, speed);
731
732 clk_rate = clk_get_rate(&twsi->clk);
733 if (IS_ERR_VALUE(clk_rate))
734 return -EINVAL;
735
736 twsi_calc_div(bus, clk_rate, speed, &m_div, &n_div);
737 if (m_div >= 16)
738 return -1;
739
740 val = (u32)(((m_div & 0xf) << 3) | ((n_div & 0x7) << 0)) |
741 FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CLKCTL) |
742 FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
743 TWSI_SW_V;
744 /* Only init non-slave ports */
745 writeq(val, twsi->base + TWSI_SW_TWSI);
746
747 debug("%s: Wrote 0x%llx to sw_twsi\n", __func__, val);
748 return 0;
749}
750
Stefan Roeseaf03bde2020-07-23 14:09:36 +0200751static const struct octeon_i2c_data i2c_octeon_data = {
752 .probe = PROBE_DT,
753 .reg_offs = 0x0000,
754 .thp = 3,
755 .clk_method = CLK_METHOD_OCTEON,
756};
757
758static const struct octeon_i2c_data i2c_octeontx_data = {
759 .probe = PROBE_PCI,
760 .reg_offs = 0x1000,
761 .thp = 24,
762 .clk_method = CLK_METHOD_OCTEON,
763};
764
765static const struct octeon_i2c_data i2c_octeontx2_data = {
766 .probe = PROBE_PCI,
767 .reg_offs = 0x1000,
768 .thp = 3,
769 .clk_method = CLK_METHOD_OCTEONTX2,
770};
771
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200772/**
773 * Driver probe function
774 *
775 * @dev I2C device to probe
Heinrich Schuchardt185f8122022-01-19 18:05:50 +0100776 * Return: 0 for success, otherwise error
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200777 */
778static int octeon_i2c_probe(struct udevice *dev)
779{
780 struct octeon_twsi *twsi = dev_get_priv(dev);
781 u32 i2c_slave_addr;
782 int ret;
783
Stefan Roeseaf03bde2020-07-23 14:09:36 +0200784 /* Octeon TX2 needs a different data struct */
785 if (device_is_compatible(dev, "cavium,thunderx-i2c"))
786 dev->driver_data = (long)&i2c_octeontx2_data;
787
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200788 twsi->data = (const struct octeon_i2c_data *)dev_get_driver_data(dev);
789
790 if (twsi->data->probe == PROBE_PCI) {
791 pci_dev_t bdf = dm_pci_get_bdf(dev);
792
793 debug("TWSI PCI device: %x\n", bdf);
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200794
Andrew Scull2635e3b2022-04-21 16:11:13 +0000795 twsi->base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, 0, 0, PCI_REGION_TYPE,
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200796 PCI_REGION_MEM);
797 } else {
798 twsi->base = dev_remap_addr(dev);
799 }
800 twsi->base += twsi->data->reg_offs;
801
802 i2c_slave_addr = dev_read_u32_default(dev, "i2c-sda-hold-time-ns",
Tom Rini6e7df1d2023-01-10 11:19:45 -0500803 CFG_SYS_I2C_OCTEON_SLAVE_ADDR);
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200804
805 ret = clk_get_by_index(dev, 0, &twsi->clk);
806 if (ret < 0)
807 return ret;
808
809 ret = clk_enable(&twsi->clk);
810 if (ret)
811 return ret;
812
Simon Glass8b85dfc2020-12-16 21:20:07 -0700813 debug("TWSI bus %d at %p\n", dev_seq(dev), twsi->base);
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200814
815 /* Start with standard speed, real speed set via DT or cmd */
816 return twsi_init(twsi->base, i2c_slave_addr);
817}
818
819static const struct dm_i2c_ops octeon_i2c_ops = {
820 .xfer = octeon_i2c_xfer,
821 .set_bus_speed = octeon_i2c_set_bus_speed,
822};
823
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200824static const struct udevice_id octeon_i2c_ids[] = {
825 { .compatible = "cavium,octeon-7890-twsi",
826 .data = (ulong)&i2c_octeon_data },
827 { .compatible = "cavium,thunder-8890-twsi",
828 .data = (ulong)&i2c_octeontx_data },
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200829 { }
830};
831
832U_BOOT_DRIVER(octeon_pci_twsi) = {
833 .name = "i2c_octeon",
834 .id = UCLASS_I2C,
835 .of_match = octeon_i2c_ids,
836 .probe = octeon_i2c_probe,
Simon Glass41575d82020-12-03 16:55:17 -0700837 .priv_auto = sizeof(struct octeon_twsi),
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200838 .ops = &octeon_i2c_ops,
839};