blob: 472402942442da0c16e2d530e33c89e36fed7927 [file] [log] [blame]
HeungJun, Kim89f95492012-01-16 21:13:05 +00001/*
2 * Copyright (C) 2011 Samsung Electronics
3 * Heungjun Kim <riverful.kim@samsung.com>
4 * Kyungmin Park <kyungmin.park@samsung.com>
Donghwa Lee51b1cd62012-04-05 19:36:27 +00005 * Donghwa Lee <dh09.lee@samsung.com>
HeungJun, Kim89f95492012-01-16 21:13:05 +00006 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26#include <common.h>
Donghwa Lee51b1cd62012-04-05 19:36:27 +000027#include <lcd.h>
HeungJun, Kim89f95492012-01-16 21:13:05 +000028#include <asm/io.h>
29#include <asm/arch/cpu.h>
30#include <asm/arch/gpio.h>
31#include <asm/arch/mmc.h>
Piotr Wilczekd651e882012-09-20 00:19:58 +000032#include <asm/arch/pinmux.h>
HeungJun, Kim89f95492012-01-16 21:13:05 +000033#include <asm/arch/clock.h>
Donghwa Lee51b1cd62012-04-05 19:36:27 +000034#include <asm/arch/clk.h>
35#include <asm/arch/mipi_dsim.h>
HeungJun, Kim89f95492012-01-16 21:13:05 +000036#include <asm/arch/watchdog.h>
37#include <asm/arch/power.h>
Łukasz Majewskic7336812012-11-13 03:21:55 +000038#include <power/pmic.h>
HeungJun, Kim89f95492012-01-16 21:13:05 +000039#include <usb/s3c_udc.h>
Łukasz Majewskic7336812012-11-13 03:21:55 +000040#include <power/max8997_pmic.h>
Donghwa Lee90464972012-05-09 19:23:46 +000041#include <libtizen.h>
Łukasz Majewski7dcda992012-11-13 03:22:06 +000042#include <power/max8997_muic.h>
Łukasz Majewski61365ff2012-11-13 03:22:08 +000043#include <power/battery.h>
Łukasz Majewski5a773582012-11-13 03:22:07 +000044#include <power/max17042_fg.h>
HeungJun, Kim89f95492012-01-16 21:13:05 +000045
46#include "setup.h"
47
48DECLARE_GLOBAL_DATA_PTR;
49
50unsigned int board_rev;
51
52#ifdef CONFIG_REVISION_TAG
53u32 get_board_rev(void)
54{
55 return board_rev;
56}
57#endif
58
59static void check_hw_revision(void);
60
Donghwa Lee3d024082012-04-26 18:52:26 +000061static int hwrevision(int rev)
62{
63 return (board_rev & 0xf) == rev;
64}
65
Lukasz Majewskia241d6e2012-08-06 14:41:10 +020066struct s3c_plat_otg_data s5pc210_otg_data;
67
HeungJun, Kim89f95492012-01-16 21:13:05 +000068int board_init(void)
69{
70 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
71
72 check_hw_revision();
73 printf("HW Revision:\t0x%x\n", board_rev);
74
HeungJun, Kim89f95492012-01-16 21:13:05 +000075 return 0;
76}
77
Łukasz Majewskifd8dca82012-09-04 23:15:21 +000078void i2c_init_board(void)
79{
80 struct exynos4_gpio_part1 *gpio1 =
81 (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
82 struct exynos4_gpio_part2 *gpio2 =
83 (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
84
85 /* I2C_5 -> PMIC */
86 s5p_gpio_direction_output(&gpio1->b, 7, 1);
87 s5p_gpio_direction_output(&gpio1->b, 6, 1);
88 /* I2C_9 -> FG */
89 s5p_gpio_direction_output(&gpio2->y4, 0, 1);
90 s5p_gpio_direction_output(&gpio2->y4, 1, 1);
91}
92
Łukasz Majewski69ad72a2012-11-13 03:22:10 +000093static void trats_low_power_mode(void)
94{
95 struct exynos4_clock *clk =
96 (struct exynos4_clock *)samsung_get_base_clock();
97 struct exynos4_power *pwr =
98 (struct exynos4_power *)samsung_get_base_power();
99
100 /* Power down CORE1 */
101 /* LOCAL_PWR_CFG [1:0] 0x3 EN, 0x0 DIS */
102 writel(0x0, &pwr->arm_core1_configuration);
103
104 /* Change the APLL frequency */
105 /* ENABLE (1 enable) | LOCKED (1 locked) */
106 /* [31] | [29] */
107 /* FSEL | MDIV | PDIV | SDIV */
108 /* [27] | [25:16] | [13:8] | [2:0] */
109 writel(0xa0c80604, &clk->apll_con0);
110
111 /* Change CPU0 clock divider */
112 /* CORE2_RATIO | APLL_RATIO | PCLK_DBG_RATIO | ATB_RATIO */
113 /* [30:28] | [26:24] | [22:20] | [18:16] */
114 /* PERIPH_RATIO | COREM1_RATIO | COREM0_RATIO | CORE_RATIO */
115 /* [14:12] | [10:8] | [6:4] | [2:0] */
116 writel(0x00000100, &clk->div_cpu0);
117
118 /* CLK_DIV_STAT_CPU0 - wait until clock gets stable (0 = stable) */
119 while (readl(&clk->div_stat_cpu0) & 0x1111111)
120 continue;
121
122 /* Change clock divider ratio for DMC */
123 /* DMCP_RATIO | DMCD_RATIO */
124 /* [22:20] | [18:16] */
125 /* DMC_RATIO | DPHY_RATIO | ACP_PCLK_RATIO | ACP_RATIO */
126 /* [14:12] | [10:8] | [6:4] | [2:0] */
127 writel(0x13113117, &clk->div_dmc0);
128
129 /* CLK_DIV_STAT_DMC0 - wait until clock gets stable (0 = stable) */
130 while (readl(&clk->div_stat_dmc0) & 0x11111111)
131 continue;
132
133 /* Turn off unnecessary power domains */
134 writel(0x0, &pwr->xxti_configuration); /* XXTI */
135 writel(0x0, &pwr->cam_configuration); /* CAM */
136 writel(0x0, &pwr->tv_configuration); /* TV */
137 writel(0x0, &pwr->mfc_configuration); /* MFC */
138 writel(0x0, &pwr->g3d_configuration); /* G3D */
139 writel(0x0, &pwr->gps_configuration); /* GPS */
140 writel(0x0, &pwr->gps_alive_configuration); /* GPS_ALIVE */
141
142 /* Turn off unnecessary clocks */
143 writel(0x0, &clk->gate_ip_cam); /* CAM */
144 writel(0x0, &clk->gate_ip_tv); /* TV */
145 writel(0x0, &clk->gate_ip_mfc); /* MFC */
146 writel(0x0, &clk->gate_ip_g3d); /* G3D */
147 writel(0x0, &clk->gate_ip_image); /* IMAGE */
148 writel(0x0, &clk->gate_ip_gps); /* GPS */
149}
150
Łukasz Majewskia52a7b12012-11-13 03:22:05 +0000151static int pmic_init_max8997(void)
152{
153 struct pmic *p = pmic_get("MAX8997_PMIC");
154 int i = 0, ret = 0;
155 u32 val;
156
157 if (pmic_probe(p))
158 return -1;
159
160 /* BUCK1 VARM: 1.2V */
161 val = (1200000 - 650000) / 25000;
162 ret |= pmic_reg_write(p, MAX8997_REG_BUCK1DVS1, val);
163 val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */
164 ret |= pmic_reg_write(p, MAX8997_REG_BUCK1CTRL, val);
165
166 /* BUCK2 VINT: 1.1V */
167 val = (1100000 - 650000) / 25000;
168 ret |= pmic_reg_write(p, MAX8997_REG_BUCK2DVS1, val);
169 val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */
170 ret |= pmic_reg_write(p, MAX8997_REG_BUCK2CTRL, val);
171
172
173 /* BUCK3 G3D: 1.1V - OFF */
174 ret |= pmic_reg_read(p, MAX8997_REG_BUCK3CTRL, &val);
175 val &= ~ENBUCK;
176 ret |= pmic_reg_write(p, MAX8997_REG_BUCK3CTRL, val);
177
178 val = (1100000 - 750000) / 50000;
179 ret |= pmic_reg_write(p, MAX8997_REG_BUCK3DVS, val);
180
181 /* BUCK4 CAMISP: 1.2V - OFF */
182 ret |= pmic_reg_read(p, MAX8997_REG_BUCK4CTRL, &val);
183 val &= ~ENBUCK;
184 ret |= pmic_reg_write(p, MAX8997_REG_BUCK4CTRL, val);
185
186 val = (1200000 - 650000) / 25000;
187 ret |= pmic_reg_write(p, MAX8997_REG_BUCK4DVS, val);
188
189 /* BUCK5 VMEM: 1.2V */
190 val = (1200000 - 650000) / 25000;
191 for (i = 0; i < 8; i++)
192 ret |= pmic_reg_write(p, MAX8997_REG_BUCK5DVS1 + i, val);
193
194 val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */
195 ret |= pmic_reg_write(p, MAX8997_REG_BUCK5CTRL, val);
196
197 /* BUCK6 CAM AF: 2.8V */
198 /* No Voltage Setting Register */
199 /* GNSLCT 3.0X */
200 val = GNSLCT;
201 ret |= pmic_reg_write(p, MAX8997_REG_BUCK6CTRL, val);
202
203 /* BUCK7 VCC_SUB: 2.0V */
204 val = (2000000 - 750000) / 50000;
205 ret |= pmic_reg_write(p, MAX8997_REG_BUCK7DVS, val);
206
207 /* LDO1 VADC: 3.3V */
208 val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */
209 ret |= pmic_reg_write(p, MAX8997_REG_LDO1CTRL, val);
210
211 /* LDO1 Disable active discharging */
212 ret |= pmic_reg_read(p, MAX8997_REG_LDO1CONFIG, &val);
213 val &= ~LDO_ADE;
214 ret |= pmic_reg_write(p, MAX8997_REG_LDO1CONFIG, val);
215
216 /* LDO2 VALIVE: 1.1V */
217 val = max8997_reg_ldo(1100000) | EN_LDO;
218 ret |= pmic_reg_write(p, MAX8997_REG_LDO2CTRL, val);
219
220 /* LDO3 VUSB/MIPI: 1.1V */
221 val = max8997_reg_ldo(1100000) | DIS_LDO; /* OFF */
222 ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, val);
223
224 /* LDO4 VMIPI: 1.8V */
225 val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
226 ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, val);
227
228 /* LDO5 VHSIC: 1.2V */
229 val = max8997_reg_ldo(1200000) | DIS_LDO; /* OFF */
230 ret |= pmic_reg_write(p, MAX8997_REG_LDO5CTRL, val);
231
232 /* LDO6 VCC_1.8V_PDA: 1.8V */
233 val = max8997_reg_ldo(1800000) | EN_LDO;
234 ret |= pmic_reg_write(p, MAX8997_REG_LDO6CTRL, val);
235
236 /* LDO7 CAM_ISP: 1.8V */
237 val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
238 ret |= pmic_reg_write(p, MAX8997_REG_LDO7CTRL, val);
239
240 /* LDO8 VDAC/VUSB: 3.3V */
241 val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */
242 ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, val);
243
244 /* LDO9 VCC_2.8V_PDA: 2.8V */
245 val = max8997_reg_ldo(2800000) | EN_LDO;
246 ret |= pmic_reg_write(p, MAX8997_REG_LDO9CTRL, val);
247
248 /* LDO10 VPLL: 1.1V */
249 val = max8997_reg_ldo(1100000) | EN_LDO;
250 ret |= pmic_reg_write(p, MAX8997_REG_LDO10CTRL, val);
251
252 /* LDO11 TOUCH: 2.8V */
253 val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */
254 ret |= pmic_reg_write(p, MAX8997_REG_LDO11CTRL, val);
255
256 /* LDO12 VTCAM: 1.8V */
257 val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
258 ret |= pmic_reg_write(p, MAX8997_REG_LDO12CTRL, val);
259
260 /* LDO13 VCC_3.0_LCD: 3.0V */
261 val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */
262 ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, val);
263
264 /* LDO14 MOTOR: 3.0V */
265 val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */
266 ret |= pmic_reg_write(p, MAX8997_REG_LDO14CTRL, val);
267
268 /* LDO15 LED_A: 2.8V */
269 val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */
270 ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, val);
271
272 /* LDO16 CAM_SENSOR: 1.8V */
273 val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
274 ret |= pmic_reg_write(p, MAX8997_REG_LDO16CTRL, val);
275
276 /* LDO17 VTF: 2.8V */
277 val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */
278 ret |= pmic_reg_write(p, MAX8997_REG_LDO17CTRL, val);
279
280 /* LDO18 TOUCH_LED 3.3V */
281 val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */
282 ret |= pmic_reg_write(p, MAX8997_REG_LDO18CTRL, val);
283
284 /* LDO21 VDDQ: 1.2V */
285 val = max8997_reg_ldo(1200000) | EN_LDO;
286 ret |= pmic_reg_write(p, MAX8997_REG_LDO21CTRL, val);
287
288 /* SAFEOUT for both 1 and 2: 4.9V, Active discharge, Enable */
289 val = (SAFEOUT_4_90V << 0) | (SAFEOUT_4_90V << 2) |
290 ACTDISSAFEO1 | ACTDISSAFEO2 | ENSAFEOUT1 | ENSAFEOUT2;
291 ret |= pmic_reg_write(p, MAX8997_REG_SAFEOUTCTRL, val);
292
293 if (ret) {
294 puts("MAX8997 PMIC setting error!\n");
295 return -1;
296 }
297 return 0;
298}
299
Łukasz Majewskid47ab982012-11-13 03:21:57 +0000300int power_init_board(void)
301{
Łukasz Majewskibdee9c82012-11-13 03:22:11 +0000302 int chrg, ret;
303 struct power_battery *pb;
304 struct pmic *p_fg, *p_chrg, *p_muic, *p_bat;
Łukasz Majewskid47ab982012-11-13 03:21:57 +0000305
306 ret = pmic_init(I2C_5);
Łukasz Majewskia52a7b12012-11-13 03:22:05 +0000307 ret |= pmic_init_max8997();
Łukasz Majewski5a773582012-11-13 03:22:07 +0000308 ret |= power_fg_init(I2C_9);
Łukasz Majewski7dcda992012-11-13 03:22:06 +0000309 ret |= power_muic_init(I2C_5);
Łukasz Majewski61365ff2012-11-13 03:22:08 +0000310 ret |= power_bat_init(0);
Łukasz Majewskid47ab982012-11-13 03:21:57 +0000311 if (ret)
312 return ret;
313
Łukasz Majewskibdee9c82012-11-13 03:22:11 +0000314 p_fg = pmic_get("MAX17042_FG");
315 if (!p_fg) {
316 puts("MAX17042_FG: Not found\n");
317 return -ENODEV;
318 }
319
320 p_chrg = pmic_get("MAX8997_PMIC");
321 if (!p_chrg) {
322 puts("MAX8997_PMIC: Not found\n");
323 return -ENODEV;
324 }
325
326 p_muic = pmic_get("MAX8997_MUIC");
327 if (!p_muic) {
328 puts("MAX8997_MUIC: Not found\n");
329 return -ENODEV;
330 }
331
332 p_bat = pmic_get("BAT_TRATS");
333 if (!p_bat) {
334 puts("BAT_TRATS: Not found\n");
335 return -ENODEV;
336 }
337
338 p_fg->parent = p_bat;
339 p_chrg->parent = p_bat;
340 p_muic->parent = p_bat;
341
342 p_bat->low_power_mode = trats_low_power_mode;
343 p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic);
344
345 pb = p_bat->pbat;
346 chrg = p_muic->chrg->chrg_type(p_muic);
347 debug("CHARGER TYPE: %d\n", chrg);
348
349 if (!p_chrg->chrg->chrg_bat_present(p_chrg)) {
350 puts("No battery detected\n");
351 return -1;
352 }
353
354 p_fg->fg->fg_battery_check(p_fg, p_bat);
355
356 if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
357 puts("CHARGE Battery !\n");
358
Łukasz Majewskid47ab982012-11-13 03:21:57 +0000359 return 0;
360}
361
HeungJun, Kim89f95492012-01-16 21:13:05 +0000362int dram_init(void)
363{
364 gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
Piotr Wilczek11c5bc02012-09-20 00:19:56 +0000365 get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) +
366 get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) +
367 get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
HeungJun, Kim89f95492012-01-16 21:13:05 +0000368
369 return 0;
370}
371
372void dram_init_banksize(void)
373{
374 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
375 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
376 gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
377 gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
Piotr Wilczek11c5bc02012-09-20 00:19:56 +0000378 gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
379 gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
380 gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
381 gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
HeungJun, Kim89f95492012-01-16 21:13:05 +0000382}
383
384static unsigned int get_hw_revision(void)
385{
386 struct exynos4_gpio_part1 *gpio =
387 (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
388 int hwrev = 0;
389 int i;
390
391 /* hw_rev[3:0] == GPE1[3:0] */
392 for (i = 0; i < 4; i++) {
393 s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT);
394 s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE);
395 }
396
397 udelay(1);
398
399 for (i = 0; i < 4; i++)
400 hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i);
401
402 debug("hwrev 0x%x\n", hwrev);
403
404 return hwrev;
405}
406
407static void check_hw_revision(void)
408{
409 int hwrev;
410
411 hwrev = get_hw_revision();
412
413 board_rev |= hwrev;
414}
415
416#ifdef CONFIG_DISPLAY_BOARDINFO
417int checkboard(void)
418{
419 puts("Board:\tTRATS\n");
420 return 0;
421}
422#endif
423
424#ifdef CONFIG_GENERIC_MMC
425int board_mmc_init(bd_t *bis)
426{
427 struct exynos4_gpio_part2 *gpio =
428 (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
Piotr Wilczekd651e882012-09-20 00:19:58 +0000429 int err;
HeungJun, Kim89f95492012-01-16 21:13:05 +0000430
431 /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
432 s5p_gpio_direction_output(&gpio->k0, 2, 1);
433 s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE);
434
435 /*
HeungJun, Kim89f95492012-01-16 21:13:05 +0000436 * MMC device init
437 * mmc0 : eMMC (8-bit buswidth)
438 * mmc2 : SD card (4-bit buswidth)
439 */
Piotr Wilczekd651e882012-09-20 00:19:58 +0000440 err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
441 if (err)
442 debug("SDMMC0 not configured\n");
443 else
444 err = s5p_mmc_init(0, 8);
HeungJun, Kim89f95492012-01-16 21:13:05 +0000445
446 /* T-flash detect */
447 s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf);
448 s5p_gpio_set_pull(&gpio->x3, 4, GPIO_PULL_UP);
449
450 /*
451 * Check the T-flash detect pin
452 * GPX3[4] T-flash detect pin
453 */
454 if (!s5p_gpio_get_value(&gpio->x3, 4)) {
Piotr Wilczekd651e882012-09-20 00:19:58 +0000455 err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
456 if (err)
457 debug("SDMMC2 not configured\n");
458 else
459 err = s5p_mmc_init(2, 4);
HeungJun, Kim89f95492012-01-16 21:13:05 +0000460 }
461
462 return err;
463}
464#endif
465
466#ifdef CONFIG_USB_GADGET
467static int s5pc210_phy_control(int on)
468{
469 int ret = 0;
Łukasz Majewskia0f5b5a2012-04-25 23:30:18 +0000470 u32 val = 0;
Łukasz Majewskic7336812012-11-13 03:21:55 +0000471 struct pmic *p = pmic_get("MAX8997_PMIC");
472 if (!p)
473 return -ENODEV;
HeungJun, Kim89f95492012-01-16 21:13:05 +0000474
475 if (pmic_probe(p))
476 return -1;
477
478 if (on) {
Łukasz Majewski04ce68e2012-03-29 01:29:18 +0000479 ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL,
480 ENSAFEOUT1, LDO_ON);
Łukasz Majewskia0f5b5a2012-04-25 23:30:18 +0000481 ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val);
482 ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, EN_LDO | val);
483
484 ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val);
485 ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, EN_LDO | val);
HeungJun, Kim89f95492012-01-16 21:13:05 +0000486 } else {
Łukasz Majewskia0f5b5a2012-04-25 23:30:18 +0000487 ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val);
488 ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, DIS_LDO | val);
489
490 ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val);
491 ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, DIS_LDO | val);
Łukasz Majewski04ce68e2012-03-29 01:29:18 +0000492 ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL,
493 ENSAFEOUT1, LDO_OFF);
HeungJun, Kim89f95492012-01-16 21:13:05 +0000494 }
495
496 if (ret) {
Łukasz Majewski04ce68e2012-03-29 01:29:18 +0000497 puts("MAX8997 LDO setting error!\n");
HeungJun, Kim89f95492012-01-16 21:13:05 +0000498 return -1;
499 }
500
501 return 0;
502}
503
504struct s3c_plat_otg_data s5pc210_otg_data = {
505 .phy_control = s5pc210_phy_control,
506 .regs_phy = EXYNOS4_USBPHY_BASE,
507 .regs_otg = EXYNOS4_USBOTG_BASE,
508 .usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
509 .usb_flags = PHY0_SLEEP,
510};
Lukasz Majewskia241d6e2012-08-06 14:41:10 +0200511
512void board_usb_init(void)
513{
514 debug("USB_udc_probe\n");
515 s3c_udc_probe(&s5pc210_otg_data);
516}
HeungJun, Kim89f95492012-01-16 21:13:05 +0000517#endif
518
519static void pmic_reset(void)
520{
521 struct exynos4_gpio_part2 *gpio =
522 (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
523
524 s5p_gpio_direction_output(&gpio->x0, 7, 1);
525 s5p_gpio_set_pull(&gpio->x2, 7, GPIO_PULL_NONE);
526}
527
528static void board_clock_init(void)
529{
530 struct exynos4_clock *clk =
531 (struct exynos4_clock *)samsung_get_base_clock();
532
533 writel(CLK_SRC_CPU_VAL, (unsigned int)&clk->src_cpu);
534 writel(CLK_SRC_TOP0_VAL, (unsigned int)&clk->src_top0);
535 writel(CLK_SRC_FSYS_VAL, (unsigned int)&clk->src_fsys);
536 writel(CLK_SRC_PERIL0_VAL, (unsigned int)&clk->src_peril0);
537
538 writel(CLK_DIV_CPU0_VAL, (unsigned int)&clk->div_cpu0);
539 writel(CLK_DIV_CPU1_VAL, (unsigned int)&clk->div_cpu1);
540 writel(CLK_DIV_DMC0_VAL, (unsigned int)&clk->div_dmc0);
541 writel(CLK_DIV_DMC1_VAL, (unsigned int)&clk->div_dmc1);
542 writel(CLK_DIV_LEFTBUS_VAL, (unsigned int)&clk->div_leftbus);
543 writel(CLK_DIV_RIGHTBUS_VAL, (unsigned int)&clk->div_rightbus);
544 writel(CLK_DIV_TOP_VAL, (unsigned int)&clk->div_top);
545 writel(CLK_DIV_FSYS1_VAL, (unsigned int)&clk->div_fsys1);
546 writel(CLK_DIV_FSYS2_VAL, (unsigned int)&clk->div_fsys2);
547 writel(CLK_DIV_FSYS3_VAL, (unsigned int)&clk->div_fsys3);
548 writel(CLK_DIV_PERIL0_VAL, (unsigned int)&clk->div_peril0);
549 writel(CLK_DIV_PERIL3_VAL, (unsigned int)&clk->div_peril3);
550
551 writel(PLL_LOCKTIME, (unsigned int)&clk->apll_lock);
552 writel(PLL_LOCKTIME, (unsigned int)&clk->mpll_lock);
553 writel(PLL_LOCKTIME, (unsigned int)&clk->epll_lock);
554 writel(PLL_LOCKTIME, (unsigned int)&clk->vpll_lock);
555 writel(APLL_CON1_VAL, (unsigned int)&clk->apll_con1);
556 writel(APLL_CON0_VAL, (unsigned int)&clk->apll_con0);
557 writel(MPLL_CON1_VAL, (unsigned int)&clk->mpll_con1);
558 writel(MPLL_CON0_VAL, (unsigned int)&clk->mpll_con0);
559 writel(EPLL_CON1_VAL, (unsigned int)&clk->epll_con1);
560 writel(EPLL_CON0_VAL, (unsigned int)&clk->epll_con0);
561 writel(VPLL_CON1_VAL, (unsigned int)&clk->vpll_con1);
562 writel(VPLL_CON0_VAL, (unsigned int)&clk->vpll_con0);
563
564 writel(CLK_GATE_IP_CAM_VAL, (unsigned int)&clk->gate_ip_cam);
565 writel(CLK_GATE_IP_VP_VAL, (unsigned int)&clk->gate_ip_tv);
566 writel(CLK_GATE_IP_MFC_VAL, (unsigned int)&clk->gate_ip_mfc);
567 writel(CLK_GATE_IP_G3D_VAL, (unsigned int)&clk->gate_ip_g3d);
568 writel(CLK_GATE_IP_IMAGE_VAL, (unsigned int)&clk->gate_ip_image);
569 writel(CLK_GATE_IP_LCD0_VAL, (unsigned int)&clk->gate_ip_lcd0);
570 writel(CLK_GATE_IP_LCD1_VAL, (unsigned int)&clk->gate_ip_lcd1);
571 writel(CLK_GATE_IP_FSYS_VAL, (unsigned int)&clk->gate_ip_fsys);
572 writel(CLK_GATE_IP_GPS_VAL, (unsigned int)&clk->gate_ip_gps);
573 writel(CLK_GATE_IP_PERIL_VAL, (unsigned int)&clk->gate_ip_peril);
574 writel(CLK_GATE_IP_PERIR_VAL, (unsigned int)&clk->gate_ip_perir);
575 writel(CLK_GATE_BLOCK_VAL, (unsigned int)&clk->gate_block);
576}
577
HeungJun, Kim89f95492012-01-16 21:13:05 +0000578static void board_power_init(void)
579{
580 struct exynos4_power *pwr =
581 (struct exynos4_power *)samsung_get_base_power();
582
583 /* PS HOLD */
584 writel(EXYNOS4_PS_HOLD_CON_VAL, (unsigned int)&pwr->ps_hold_control);
585
586 /* Set power down */
587 writel(0, (unsigned int)&pwr->cam_configuration);
588 writel(0, (unsigned int)&pwr->tv_configuration);
589 writel(0, (unsigned int)&pwr->mfc_configuration);
590 writel(0, (unsigned int)&pwr->g3d_configuration);
591 writel(0, (unsigned int)&pwr->lcd1_configuration);
592 writel(0, (unsigned int)&pwr->gps_configuration);
593 writel(0, (unsigned int)&pwr->gps_alive_configuration);
Piotr Wilczekab233042012-10-08 20:45:42 +0000594
595 /* It is necessary to power down core 1 */
596 /* to successfully boot CPU1 in kernel */
597 writel(0, (unsigned int)&pwr->arm_core1_configuration);
HeungJun, Kim89f95492012-01-16 21:13:05 +0000598}
599
600static void board_uart_init(void)
601{
602 struct exynos4_gpio_part1 *gpio1 =
603 (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
604 struct exynos4_gpio_part2 *gpio2 =
605 (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
606 int i;
607
HeungJun, Kim89f95492012-01-16 21:13:05 +0000608 /*
Minkyu Kang8aca4d62012-01-26 19:51:54 +0900609 * UART2 GPIOs
610 * GPA1CON[0] = UART_2_RXD(2)
611 * GPA1CON[1] = UART_2_TXD(2)
HeungJun, Kim89f95492012-01-16 21:13:05 +0000612 * GPA1CON[2] = I2C_3_SDA (3)
Minkyu Kang8aca4d62012-01-26 19:51:54 +0900613 * GPA1CON[3] = I2C_3_SCL (3)
HeungJun, Kim89f95492012-01-16 21:13:05 +0000614 */
Minkyu Kang8aca4d62012-01-26 19:51:54 +0900615
616 for (i = 0; i < 4; i++) {
HeungJun, Kim89f95492012-01-16 21:13:05 +0000617 s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
Minkyu Kang8aca4d62012-01-26 19:51:54 +0900618 s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC((i > 1) ? 0x3 : 0x2));
HeungJun, Kim89f95492012-01-16 21:13:05 +0000619 }
620
621 /* UART_SEL GPY4[7] (part2) at EXYNOS4 */
622 s5p_gpio_set_pull(&gpio2->y4, 7, GPIO_PULL_UP);
623 s5p_gpio_direction_output(&gpio2->y4, 7, 1);
624}
625
626int board_early_init_f(void)
627{
Minkyu Kang85948a82012-01-18 15:56:47 +0900628 wdt_stop();
HeungJun, Kim89f95492012-01-16 21:13:05 +0000629 pmic_reset();
630 board_clock_init();
631 board_uart_init();
632 board_power_init();
633
634 return 0;
635}
Donghwa Lee51b1cd62012-04-05 19:36:27 +0000636
637static void lcd_reset(void)
638{
639 struct exynos4_gpio_part2 *gpio2 =
640 (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
641
642 s5p_gpio_direction_output(&gpio2->y4, 5, 1);
643 udelay(10000);
644 s5p_gpio_direction_output(&gpio2->y4, 5, 0);
645 udelay(10000);
646 s5p_gpio_direction_output(&gpio2->y4, 5, 1);
647}
648
649static int lcd_power(void)
650{
651 int ret = 0;
Łukasz Majewskic7336812012-11-13 03:21:55 +0000652 struct pmic *p = pmic_get("MAX8997_PMIC");
653 if (!p)
654 return -ENODEV;
Donghwa Lee51b1cd62012-04-05 19:36:27 +0000655
656 if (pmic_probe(p))
657 return 0;
658
659 /* LDO15 voltage: 2.2v */
660 ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, 0x1c | EN_LDO);
661 /* LDO13 voltage: 3.0v */
662 ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, 0x2c | EN_LDO);
663
664 if (ret) {
665 puts("MAX8997 LDO setting error!\n");
666 return -1;
667 }
668
669 return 0;
670}
671
672static struct mipi_dsim_config dsim_config = {
673 .e_interface = DSIM_VIDEO,
674 .e_virtual_ch = DSIM_VIRTUAL_CH_0,
675 .e_pixel_format = DSIM_24BPP_888,
676 .e_burst_mode = DSIM_BURST_SYNC_EVENT,
677 .e_no_data_lane = DSIM_DATA_LANE_4,
678 .e_byte_clk = DSIM_PLL_OUT_DIV8,
679 .hfp = 1,
680
681 .p = 3,
682 .m = 120,
683 .s = 1,
684
685 /* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */
686 .pll_stable_time = 500,
687
688 /* escape clk : 10MHz */
689 .esc_clk = 20 * 1000000,
690
691 /* stop state holding counter after bta change count 0 ~ 0xfff */
692 .stop_holding_cnt = 0x7ff,
693 /* bta timeout 0 ~ 0xff */
694 .bta_timeout = 0xff,
695 /* lp rx timeout 0 ~ 0xffff */
696 .rx_timeout = 0xffff,
697};
698
699static struct exynos_platform_mipi_dsim s6e8ax0_platform_data = {
700 .lcd_panel_info = NULL,
701 .dsim_config = &dsim_config,
702};
703
704static struct mipi_dsim_lcd_device mipi_lcd_device = {
705 .name = "s6e8ax0",
706 .id = -1,
707 .bus_id = 0,
708 .platform_data = (void *)&s6e8ax0_platform_data,
709};
710
711static int mipi_power(void)
712{
713 int ret = 0;
Łukasz Majewskic7336812012-11-13 03:21:55 +0000714 struct pmic *p = pmic_get("MAX8997_PMIC");
715 if (!p)
716 return -ENODEV;
Donghwa Lee51b1cd62012-04-05 19:36:27 +0000717
718 if (pmic_probe(p))
719 return 0;
720
721 /* LDO3 voltage: 1.1v */
722 ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, 0x6 | EN_LDO);
723 /* LDO4 voltage: 1.8v */
724 ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, 0x14 | EN_LDO);
725
726 if (ret) {
727 puts("MAX8997 LDO setting error!\n");
728 return -1;
729 }
730
731 return 0;
732}
733
Donghwa Leec2054562012-04-25 13:29:39 +0000734vidinfo_t panel_info = {
735 .vl_freq = 60,
736 .vl_col = 720,
737 .vl_row = 1280,
738 .vl_width = 720,
739 .vl_height = 1280,
740 .vl_clkp = CONFIG_SYS_HIGH,
741 .vl_hsp = CONFIG_SYS_LOW,
742 .vl_vsp = CONFIG_SYS_LOW,
743 .vl_dp = CONFIG_SYS_LOW,
744 .vl_bpix = 5, /* Bits per pixel, 2^5 = 32 */
745
746 /* s6e8ax0 Panel infomation */
747 .vl_hspw = 5,
748 .vl_hbpd = 10,
749 .vl_hfpd = 10,
750
751 .vl_vspw = 2,
752 .vl_vbpd = 1,
753 .vl_vfpd = 13,
754 .vl_cmd_allow_len = 0xf,
755
756 .win_id = 3,
757 .cfg_gpio = NULL,
758 .backlight_on = NULL,
759 .lcd_power_on = NULL, /* lcd_power_on in mipi dsi driver */
760 .reset_lcd = lcd_reset,
761 .dual_lcd_enabled = 0,
762
763 .init_delay = 0,
764 .power_on_delay = 0,
765 .reset_delay = 0,
766 .interface_mode = FIMD_RGB_INTERFACE,
767 .mipi_enabled = 1,
768};
769
Donghwa Lee51b1cd62012-04-05 19:36:27 +0000770void init_panel_info(vidinfo_t *vid)
771{
Donghwa Lee90464972012-05-09 19:23:46 +0000772 vid->logo_on = 1,
773 vid->resolution = HD_RESOLUTION,
774 vid->rgb_mode = MODE_RGB_P,
775
776#ifdef CONFIG_TIZEN
777 get_tizen_logo_info(vid);
778#endif
Donghwa Lee51b1cd62012-04-05 19:36:27 +0000779
Donghwa Lee3d024082012-04-26 18:52:26 +0000780 if (hwrevision(2))
781 mipi_lcd_device.reverse_panel = 1;
782
Donghwa Lee51b1cd62012-04-05 19:36:27 +0000783 strcpy(s6e8ax0_platform_data.lcd_panel_name, mipi_lcd_device.name);
784 s6e8ax0_platform_data.lcd_power = lcd_power;
785 s6e8ax0_platform_data.mipi_power = mipi_power;
786 s6e8ax0_platform_data.phy_enable = set_mipi_phy_ctrl;
787 s6e8ax0_platform_data.lcd_panel_info = (void *)vid;
788 exynos_mipi_dsi_register_lcd_device(&mipi_lcd_device);
789 s6e8ax0_init();
790 exynos_set_dsim_platform_data(&s6e8ax0_platform_data);
791
792 setenv("lcdinfo", "lcd=s6e8ax0");
793}