blob: 39bcacc17a7e122993daad35e46d045a7beb7ebd [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Simon Glass37b8eb32016-11-23 06:34:43 -07002/*
3 * Copyright (c) 2016, Google Inc
4 *
5 * (C) Copyright 2002
6 * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
Simon Glass37b8eb32016-11-23 06:34:43 -07007 */
8
9#include <common.h>
10#include <dm.h>
11#include <i2c.h>
Simon Glassf7ae49f2020-05-10 11:40:05 -060012#include <log.h>
Simon Glass37b8eb32016-11-23 06:34:43 -070013#include <asm/arch/clk.h>
14#include <asm/arch/cpu.h>
15#include <asm/arch/pinmux.h>
Simon Glass401d1c42020-10-30 21:38:53 -060016#include <asm/global_data.h>
Simon Glassc05ed002020-05-10 11:40:11 -060017#include <linux/delay.h>
Simon Glass37b8eb32016-11-23 06:34:43 -070018#include "s3c24x0_i2c.h"
19
20DECLARE_GLOBAL_DATA_PTR;
21
22/* HSI2C-specific register description */
23
24/* I2C_CTL Register bits */
25#define HSI2C_FUNC_MODE_I2C (1u << 0)
26#define HSI2C_MASTER (1u << 3)
27#define HSI2C_RXCHON (1u << 6) /* Write/Send */
28#define HSI2C_TXCHON (1u << 7) /* Read/Receive */
29#define HSI2C_SW_RST (1u << 31)
30
31/* I2C_FIFO_CTL Register bits */
32#define HSI2C_RXFIFO_EN (1u << 0)
33#define HSI2C_TXFIFO_EN (1u << 1)
34#define HSI2C_TXFIFO_TRIGGER_LEVEL (0x20 << 16)
35#define HSI2C_RXFIFO_TRIGGER_LEVEL (0x20 << 4)
36
37/* I2C_TRAILING_CTL Register bits */
38#define HSI2C_TRAILING_COUNT (0xff)
39
40/* I2C_INT_EN Register bits */
41#define HSI2C_TX_UNDERRUN_EN (1u << 2)
42#define HSI2C_TX_OVERRUN_EN (1u << 3)
43#define HSI2C_RX_UNDERRUN_EN (1u << 4)
44#define HSI2C_RX_OVERRUN_EN (1u << 5)
45#define HSI2C_INT_TRAILING_EN (1u << 6)
46#define HSI2C_INT_I2C_EN (1u << 9)
47
48#define HSI2C_INT_ERROR_MASK (HSI2C_TX_UNDERRUN_EN |\
49 HSI2C_TX_OVERRUN_EN |\
50 HSI2C_RX_UNDERRUN_EN |\
51 HSI2C_RX_OVERRUN_EN |\
52 HSI2C_INT_TRAILING_EN)
53
54/* I2C_CONF Register bits */
55#define HSI2C_AUTO_MODE (1u << 31)
56#define HSI2C_10BIT_ADDR_MODE (1u << 30)
57#define HSI2C_HS_MODE (1u << 29)
58
59/* I2C_AUTO_CONF Register bits */
60#define HSI2C_READ_WRITE (1u << 16)
61#define HSI2C_STOP_AFTER_TRANS (1u << 17)
62#define HSI2C_MASTER_RUN (1u << 31)
63
64/* I2C_TIMEOUT Register bits */
65#define HSI2C_TIMEOUT_EN (1u << 31)
66
67/* I2C_TRANS_STATUS register bits */
68#define HSI2C_MASTER_BUSY (1u << 17)
69#define HSI2C_SLAVE_BUSY (1u << 16)
70#define HSI2C_TIMEOUT_AUTO (1u << 4)
71#define HSI2C_NO_DEV (1u << 3)
72#define HSI2C_NO_DEV_ACK (1u << 2)
73#define HSI2C_TRANS_ABORT (1u << 1)
74#define HSI2C_TRANS_SUCCESS (1u << 0)
75#define HSI2C_TRANS_ERROR_MASK (HSI2C_TIMEOUT_AUTO |\
76 HSI2C_NO_DEV | HSI2C_NO_DEV_ACK |\
77 HSI2C_TRANS_ABORT)
78#define HSI2C_TRANS_FINISHED_MASK (HSI2C_TRANS_ERROR_MASK | HSI2C_TRANS_SUCCESS)
79
80
81/* I2C_FIFO_STAT Register bits */
82#define HSI2C_RX_FIFO_EMPTY (1u << 24)
83#define HSI2C_RX_FIFO_FULL (1u << 23)
84#define HSI2C_TX_FIFO_EMPTY (1u << 8)
85#define HSI2C_TX_FIFO_FULL (1u << 7)
86#define HSI2C_RX_FIFO_LEVEL(x) (((x) >> 16) & 0x7f)
87#define HSI2C_TX_FIFO_LEVEL(x) ((x) & 0x7f)
88
89#define HSI2C_SLV_ADDR_MAS(x) ((x & 0x3ff) << 10)
90
91#define HSI2C_TIMEOUT_US 10000 /* 10 ms, finer granularity */
92
93/*
94 * Wait for transfer completion.
95 *
96 * This function reads the interrupt status register waiting for the INT_I2C
97 * bit to be set, which indicates copletion of a transaction.
98 *
99 * @param i2c: pointer to the appropriate register bank
100 *
101 * @return: I2C_OK in case of successful completion, I2C_NOK_TIMEOUT in case
102 * the status bits do not get set in time, or an approrpiate error
103 * value in case of transfer errors.
104 */
105static int hsi2c_wait_for_trx(struct exynos5_hsi2c *i2c)
106{
107 int i = HSI2C_TIMEOUT_US;
108
109 while (i-- > 0) {
110 u32 int_status = readl(&i2c->usi_int_stat);
111
112 if (int_status & HSI2C_INT_I2C_EN) {
113 u32 trans_status = readl(&i2c->usi_trans_status);
114
115 /* Deassert pending interrupt. */
116 writel(int_status, &i2c->usi_int_stat);
117
118 if (trans_status & HSI2C_NO_DEV_ACK) {
119 debug("%s: no ACK from device\n", __func__);
120 return I2C_NACK;
121 }
122 if (trans_status & HSI2C_NO_DEV) {
123 debug("%s: no device\n", __func__);
124 return I2C_NOK;
125 }
126 if (trans_status & HSI2C_TRANS_ABORT) {
127 debug("%s: arbitration lost\n", __func__);
128 return I2C_NOK_LA;
129 }
130 if (trans_status & HSI2C_TIMEOUT_AUTO) {
131 debug("%s: device timed out\n", __func__);
132 return I2C_NOK_TOUT;
133 }
134 return I2C_OK;
135 }
136 udelay(1);
137 }
138 debug("%s: transaction timeout!\n", __func__);
139 return I2C_NOK_TOUT;
140}
141
142static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus)
143{
144 struct exynos5_hsi2c *hsregs = i2c_bus->hsregs;
145 ulong clkin;
146 unsigned int op_clk = i2c_bus->clock_frequency;
147 unsigned int i = 0, utemp0 = 0, utemp1 = 0;
148 unsigned int t_ftl_cycle;
149
150#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
151 clkin = get_i2c_clk();
152#else
153 clkin = get_PCLK();
154#endif
155 /* FPCLK / FI2C =
156 * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
157 * uTemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
158 * uTemp1 = (TSCLK_L + TSCLK_H + 2)
159 * uTemp2 = TSCLK_L + TSCLK_H
160 */
161 t_ftl_cycle = (readl(&hsregs->usi_conf) >> 16) & 0x7;
162 utemp0 = (clkin / op_clk) - 8 - 2 * t_ftl_cycle;
163
164 /* CLK_DIV max is 256 */
165 for (i = 0; i < 256; i++) {
166 utemp1 = utemp0 / (i + 1);
167 if ((utemp1 < 512) && (utemp1 > 4)) {
168 i2c_bus->clk_cycle = utemp1 - 2;
169 i2c_bus->clk_div = i;
170 return 0;
171 }
172 }
173 return -EINVAL;
174}
175
176static void hsi2c_ch_init(struct s3c24x0_i2c_bus *i2c_bus)
177{
178 struct exynos5_hsi2c *hsregs = i2c_bus->hsregs;
179 unsigned int t_sr_release;
180 unsigned int n_clkdiv;
181 unsigned int t_start_su, t_start_hd;
182 unsigned int t_stop_su;
183 unsigned int t_data_su, t_data_hd;
184 unsigned int t_scl_l, t_scl_h;
185 u32 i2c_timing_s1;
186 u32 i2c_timing_s2;
187 u32 i2c_timing_s3;
188 u32 i2c_timing_sla;
189
190 n_clkdiv = i2c_bus->clk_div;
191 t_scl_l = i2c_bus->clk_cycle / 2;
192 t_scl_h = i2c_bus->clk_cycle / 2;
193 t_start_su = t_scl_l;
194 t_start_hd = t_scl_l;
195 t_stop_su = t_scl_l;
196 t_data_su = t_scl_l / 2;
197 t_data_hd = t_scl_l / 2;
198 t_sr_release = i2c_bus->clk_cycle;
199
200 i2c_timing_s1 = t_start_su << 24 | t_start_hd << 16 | t_stop_su << 8;
201 i2c_timing_s2 = t_data_su << 24 | t_scl_l << 8 | t_scl_h << 0;
202 i2c_timing_s3 = n_clkdiv << 16 | t_sr_release << 0;
203 i2c_timing_sla = t_data_hd << 0;
204
205 writel(HSI2C_TRAILING_COUNT, &hsregs->usi_trailing_ctl);
206
207 /* Clear to enable Timeout */
208 clrsetbits_le32(&hsregs->usi_timeout, HSI2C_TIMEOUT_EN, 0);
209
210 /* set AUTO mode */
211 writel(readl(&hsregs->usi_conf) | HSI2C_AUTO_MODE, &hsregs->usi_conf);
212
213 /* Enable completion conditions' reporting. */
214 writel(HSI2C_INT_I2C_EN, &hsregs->usi_int_en);
215
216 /* Enable FIFOs */
217 writel(HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN, &hsregs->usi_fifo_ctl);
218
219 /* Currently operating in Fast speed mode. */
220 writel(i2c_timing_s1, &hsregs->usi_timing_fs1);
221 writel(i2c_timing_s2, &hsregs->usi_timing_fs2);
222 writel(i2c_timing_s3, &hsregs->usi_timing_fs3);
223 writel(i2c_timing_sla, &hsregs->usi_timing_sla);
224}
225
226/* SW reset for the high speed bus */
227static void exynos5_i2c_reset(struct s3c24x0_i2c_bus *i2c_bus)
228{
229 struct exynos5_hsi2c *i2c = i2c_bus->hsregs;
230 u32 i2c_ctl;
231
232 /* Set and clear the bit for reset */
233 i2c_ctl = readl(&i2c->usi_ctl);
234 i2c_ctl |= HSI2C_SW_RST;
235 writel(i2c_ctl, &i2c->usi_ctl);
236
237 i2c_ctl = readl(&i2c->usi_ctl);
238 i2c_ctl &= ~HSI2C_SW_RST;
239 writel(i2c_ctl, &i2c->usi_ctl);
240
241 /* Initialize the configure registers */
242 hsi2c_ch_init(i2c_bus);
243}
244
245/*
246 * Poll the appropriate bit of the fifo status register until the interface is
247 * ready to process the next byte or timeout expires.
248 *
249 * In addition to the FIFO status register this function also polls the
250 * interrupt status register to be able to detect unexpected transaction
251 * completion.
252 *
253 * When FIFO is ready to process the next byte, this function returns I2C_OK.
254 * If in course of polling the INT_I2C assertion is detected, the function
255 * returns I2C_NOK. If timeout happens before any of the above conditions is
256 * met - the function returns I2C_NOK_TOUT;
257
258 * @param i2c: pointer to the appropriate i2c register bank.
259 * @param rx_transfer: set to True if the receive transaction is in progress.
260 * @return: as described above.
261 */
262static unsigned hsi2c_poll_fifo(struct exynos5_hsi2c *i2c, bool rx_transfer)
263{
264 u32 fifo_bit = rx_transfer ? HSI2C_RX_FIFO_EMPTY : HSI2C_TX_FIFO_FULL;
265 int i = HSI2C_TIMEOUT_US;
266
267 while (readl(&i2c->usi_fifo_stat) & fifo_bit) {
268 if (readl(&i2c->usi_int_stat) & HSI2C_INT_I2C_EN) {
269 /*
270 * There is a chance that assertion of
271 * HSI2C_INT_I2C_EN and deassertion of
272 * HSI2C_RX_FIFO_EMPTY happen simultaneously. Let's
273 * give FIFO status priority and check it one more
274 * time before reporting interrupt. The interrupt will
275 * be reported next time this function is called.
276 */
277 if (rx_transfer &&
278 !(readl(&i2c->usi_fifo_stat) & fifo_bit))
279 break;
280 return I2C_NOK;
281 }
282 if (!i--) {
283 debug("%s: FIFO polling timeout!\n", __func__);
284 return I2C_NOK_TOUT;
285 }
286 udelay(1);
287 }
288 return I2C_OK;
289}
290
291/*
292 * Preapre hsi2c transaction, either read or write.
293 *
294 * Set up transfer as described in section 27.5.1.2 'I2C Channel Auto Mode' of
295 * the 5420 UM.
296 *
297 * @param i2c: pointer to the appropriate i2c register bank.
298 * @param chip: slave address on the i2c bus (with read/write bit exlcuded)
299 * @param len: number of bytes expected to be sent or received
300 * @param rx_transfer: set to true for receive transactions
301 * @param: issue_stop: set to true if i2c stop condition should be generated
302 * after this transaction.
303 * @return: I2C_NOK_TOUT in case the bus remained busy for HSI2C_TIMEOUT_US,
304 * I2C_OK otherwise.
305 */
306static int hsi2c_prepare_transaction(struct exynos5_hsi2c *i2c,
307 u8 chip,
308 u16 len,
309 bool rx_transfer,
310 bool issue_stop)
311{
312 u32 conf;
313
314 conf = len | HSI2C_MASTER_RUN;
315
316 if (issue_stop)
317 conf |= HSI2C_STOP_AFTER_TRANS;
318
319 /* Clear to enable Timeout */
320 writel(readl(&i2c->usi_timeout) & ~HSI2C_TIMEOUT_EN, &i2c->usi_timeout);
321
322 /* Set slave address */
323 writel(HSI2C_SLV_ADDR_MAS(chip), &i2c->i2c_addr);
324
325 if (rx_transfer) {
326 /* i2c master, read transaction */
327 writel((HSI2C_RXCHON | HSI2C_FUNC_MODE_I2C | HSI2C_MASTER),
328 &i2c->usi_ctl);
329
330 /* read up to len bytes, stop after transaction is finished */
331 writel(conf | HSI2C_READ_WRITE, &i2c->usi_auto_conf);
332 } else {
333 /* i2c master, write transaction */
334 writel((HSI2C_TXCHON | HSI2C_FUNC_MODE_I2C | HSI2C_MASTER),
335 &i2c->usi_ctl);
336
337 /* write up to len bytes, stop after transaction is finished */
338 writel(conf, &i2c->usi_auto_conf);
339 }
340
341 /* Reset all pending interrupt status bits we care about, if any */
342 writel(HSI2C_INT_I2C_EN, &i2c->usi_int_stat);
343
344 return I2C_OK;
345}
346
347/*
348 * Wait while i2c bus is settling down (mostly stop gets completed).
349 */
350static int hsi2c_wait_while_busy(struct exynos5_hsi2c *i2c)
351{
352 int i = HSI2C_TIMEOUT_US;
353
354 while (readl(&i2c->usi_trans_status) & HSI2C_MASTER_BUSY) {
355 if (!i--) {
356 debug("%s: bus busy\n", __func__);
357 return I2C_NOK_TOUT;
358 }
359 udelay(1);
360 }
361 return I2C_OK;
362}
363
364static int hsi2c_write(struct exynos5_hsi2c *i2c,
365 unsigned char chip,
366 unsigned char addr[],
367 unsigned char alen,
368 unsigned char data[],
369 unsigned short len,
370 bool issue_stop)
371{
372 int i, rv = 0;
373
374 if (!(len + alen)) {
375 /* Writes of zero length not supported in auto mode. */
376 debug("%s: zero length writes not supported\n", __func__);
377 return I2C_NOK;
378 }
379
380 rv = hsi2c_prepare_transaction
381 (i2c, chip, len + alen, false, issue_stop);
382 if (rv != I2C_OK)
383 return rv;
384
385 /* Move address, if any, and the data, if any, into the FIFO. */
386 for (i = 0; i < alen; i++) {
387 rv = hsi2c_poll_fifo(i2c, false);
388 if (rv != I2C_OK) {
389 debug("%s: address write failed\n", __func__);
390 goto write_error;
391 }
392 writel(addr[i], &i2c->usi_txdata);
393 }
394
395 for (i = 0; i < len; i++) {
396 rv = hsi2c_poll_fifo(i2c, false);
397 if (rv != I2C_OK) {
398 debug("%s: data write failed\n", __func__);
399 goto write_error;
400 }
401 writel(data[i], &i2c->usi_txdata);
402 }
403
404 rv = hsi2c_wait_for_trx(i2c);
405
406 write_error:
407 if (issue_stop) {
408 int tmp_ret = hsi2c_wait_while_busy(i2c);
409 if (rv == I2C_OK)
410 rv = tmp_ret;
411 }
412
413 writel(HSI2C_FUNC_MODE_I2C, &i2c->usi_ctl); /* done */
414 return rv;
415}
416
417static int hsi2c_read(struct exynos5_hsi2c *i2c,
418 unsigned char chip,
419 unsigned char addr[],
420 unsigned char alen,
421 unsigned char data[],
422 unsigned short len)
423{
424 int i, rv, tmp_ret;
425 bool drop_data = false;
426
427 if (!len) {
428 /* Reads of zero length not supported in auto mode. */
429 debug("%s: zero length read adjusted\n", __func__);
430 drop_data = true;
431 len = 1;
432 }
433
434 if (alen) {
435 /* Internal register adress needs to be written first. */
436 rv = hsi2c_write(i2c, chip, addr, alen, NULL, 0, false);
437 if (rv != I2C_OK)
438 return rv;
439 }
440
441 rv = hsi2c_prepare_transaction(i2c, chip, len, true, true);
442
443 if (rv != I2C_OK)
444 return rv;
445
446 for (i = 0; i < len; i++) {
447 rv = hsi2c_poll_fifo(i2c, true);
448 if (rv != I2C_OK)
449 goto read_err;
450 if (drop_data)
451 continue;
452 data[i] = readl(&i2c->usi_rxdata);
453 }
454
455 rv = hsi2c_wait_for_trx(i2c);
456
457 read_err:
458 tmp_ret = hsi2c_wait_while_busy(i2c);
459 if (rv == I2C_OK)
460 rv = tmp_ret;
461
462 writel(HSI2C_FUNC_MODE_I2C, &i2c->usi_ctl); /* done */
463 return rv;
464}
465
466static int exynos_hs_i2c_xfer(struct udevice *dev, struct i2c_msg *msg,
467 int nmsgs)
468{
469 struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
470 struct exynos5_hsi2c *hsregs = i2c_bus->hsregs;
471 int ret;
472
473 for (; nmsgs > 0; nmsgs--, msg++) {
474 if (msg->flags & I2C_M_RD) {
475 ret = hsi2c_read(hsregs, msg->addr, 0, 0, msg->buf,
476 msg->len);
477 } else {
478 ret = hsi2c_write(hsregs, msg->addr, 0, 0, msg->buf,
479 msg->len, true);
480 }
481 if (ret) {
482 exynos5_i2c_reset(i2c_bus);
483 return -EREMOTEIO;
484 }
485 }
486
487 return 0;
488}
489
490static int s3c24x0_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
491{
492 struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
493
494 i2c_bus->clock_frequency = speed;
495
496 if (hsi2c_get_clk_details(i2c_bus))
497 return -EFAULT;
498 hsi2c_ch_init(i2c_bus);
499
500 return 0;
501}
502
503static int s3c24x0_i2c_probe(struct udevice *dev, uint chip, uint chip_flags)
504{
505 struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
506 uchar buf[1];
507 int ret;
508
509 buf[0] = 0;
510
511 /*
512 * What is needed is to send the chip address and verify that the
513 * address was <ACK>ed (i.e. there was a chip at that address which
514 * drove the data line low).
515 */
516 ret = hsi2c_read(i2c_bus->hsregs, chip, 0, 0, buf, 1);
517
518 return ret != I2C_OK;
519}
520
Simon Glassd1998a92020-12-03 16:55:21 -0700521static int s3c_i2c_of_to_plat(struct udevice *dev)
Simon Glass37b8eb32016-11-23 06:34:43 -0700522{
523 const void *blob = gd->fdt_blob;
524 struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
525 int node;
526
Simon Glasse160f7d2017-01-17 16:52:55 -0700527 node = dev_of_offset(dev);
Simon Glass37b8eb32016-11-23 06:34:43 -0700528
Masahiro Yamada8613c8d2020-07-17 14:36:46 +0900529 i2c_bus->hsregs = dev_read_addr_ptr(dev);
Simon Glass37b8eb32016-11-23 06:34:43 -0700530
531 i2c_bus->id = pinmux_decode_periph_id(blob, node);
532
Simon Glassf3d46152020-01-23 11:48:22 -0700533 i2c_bus->clock_frequency =
534 dev_read_u32_default(dev, "clock-frequency",
535 I2C_SPEED_STANDARD_RATE);
Simon Glass37b8eb32016-11-23 06:34:43 -0700536 i2c_bus->node = node;
Simon Glass8b85dfc2020-12-16 21:20:07 -0700537 i2c_bus->bus_num = dev_seq(dev);
Simon Glass37b8eb32016-11-23 06:34:43 -0700538
539 exynos_pinmux_config(i2c_bus->id, PINMUX_FLAG_HS_MODE);
540
541 i2c_bus->active = true;
542
543 return 0;
544}
545
546static const struct dm_i2c_ops exynos_hs_i2c_ops = {
547 .xfer = exynos_hs_i2c_xfer,
548 .probe_chip = s3c24x0_i2c_probe,
549 .set_bus_speed = s3c24x0_i2c_set_bus_speed,
550};
551
552static const struct udevice_id exynos_hs_i2c_ids[] = {
553 { .compatible = "samsung,exynos5-hsi2c" },
554 { }
555};
556
557U_BOOT_DRIVER(hs_i2c) = {
558 .name = "i2c_s3c_hs",
559 .id = UCLASS_I2C,
560 .of_match = exynos_hs_i2c_ids,
Simon Glassd1998a92020-12-03 16:55:21 -0700561 .of_to_plat = s3c_i2c_of_to_plat,
Simon Glass41575d82020-12-03 16:55:17 -0700562 .priv_auto = sizeof(struct s3c24x0_i2c_bus),
Simon Glass37b8eb32016-11-23 06:34:43 -0700563 .ops = &exynos_hs_i2c_ops,
564};