blob: 7eb9e9828466abee2115f70f4cfc47e69c42a28a [file] [log] [blame]
Thomas Chou5c0f9822015-11-09 14:45:06 +08001/*
2 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
3 * Scott McNutt <smcnutt@psyent.com>
4 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12/*
13 * BOARD/CPU
14 */
15#define CONFIG_DISPLAY_CPUINFO
16#define CONFIG_DISPLAY_BOARDINFO_LATE
17
18/*
19 * SERIAL
20 */
21#define CONFIG_BAUDRATE 115200
22#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
Thomas Chou2f3a5fe2015-11-19 21:48:15 +080023#define CONFIG_SYS_NS16550_MEM32
Thomas Chou5c0f9822015-11-09 14:45:06 +080024
25/*
26 * Flash
27 */
28#define CONFIG_SYS_MAX_FLASH_BANKS 1
29#define CONFIG_SYS_MAX_FLASH_SECT 1024
30#define CONFIG_MTD_DEVICE
31
32/*
33 * NET options
34 */
35#define CONFIG_SYS_RX_ETH_BUFFER 0
Thomas Chou5c0f9822015-11-09 14:45:06 +080036#define CONFIG_PHY_GIGE
37#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
38#define CONFIG_PHY_MARVELL
39
40/*
41 * BOOTP options
42 */
43#define CONFIG_BOOTP_BOOTFILESIZE
44#define CONFIG_BOOTP_BOOTPATH
45#define CONFIG_BOOTP_GATEWAY
46#define CONFIG_BOOTP_HOSTNAME
47
48/*
49 * FDT options
50 */
Thomas Chou5c0f9822015-11-09 14:45:06 +080051#define CONFIG_LMB
52
53/*
Thomas Chou5c0f9822015-11-09 14:45:06 +080054 * MEMORY ORGANIZATION
55 * -Monitor at top of sdram.
56 * -The heap is placed below the monitor
57 * -The stack is placed below the heap (&grows down).
58 */
59#define CONFIG_SYS_SDRAM_BASE 0xc8000000
60#define CONFIG_SYS_SDRAM_SIZE 0x08000000
61#define CONFIG_NR_DRAM_BANKS 1
62#define CONFIG_MONITOR_IS_IN_RAM
Marek Vasut7ef051e2015-12-15 03:09:23 +010063#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
Thomas Chou5c0f9822015-11-09 14:45:06 +080064#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
65 CONFIG_SYS_SDRAM_SIZE - \
66 CONFIG_SYS_MONITOR_LEN)
67#define CONFIG_SYS_MALLOC_LEN 0x20000
68
69/*
Marek Vasut2aee06a2015-12-15 03:09:22 +010070 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
71 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
72 * reset address, no? This will keep the environment in user region
73 * of flash. NOTE: the monitor length must be multiple of sector size
74 * (which is common practice).
75 */
76#define CONFIG_ENV_IS_IN_FLASH
77
78#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */
79#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
80#define CONFIG_ENV_ADDR (0xf4000000 + CONFIG_SYS_MONITOR_LEN)
81
82/*
Thomas Chou5c0f9822015-11-09 14:45:06 +080083 * MISC
84 */
85#define CONFIG_SYS_LONGHELP /* Provide extended help */
86#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
87#define CONFIG_SYS_MAXARGS 16 /* Max command args */
88#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
89#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
90 sizeof(CONFIG_SYS_PROMPT) + \
91 16) /* Print buf size */
Marek Vasutbc3abe12015-12-15 03:09:24 +010092#define CONFIG_SYS_LOAD_ADDR 0xcc000000 /* Half of RAM */
93#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
Thomas Chou5c0f9822015-11-09 14:45:06 +080094#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
95#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
96 CONFIG_ENV_SIZE - \
97 CONFIG_SYS_MALLOC_LEN - \
98 0x10000)
Marek Vasutaeea8752015-12-16 01:32:48 +010099#define CONFIG_VERSION_VARIABLE
100#define CONFIG_AUTO_COMPLETE
Thomas Chou5c0f9822015-11-09 14:45:06 +0800101#define CONFIG_CMDLINE_EDITING
Thomas Chou5c0f9822015-11-09 14:45:06 +0800102
103#endif /* __CONFIG_H */