blob: 933ccb1b7864abb9993bcaa187f25f15c9878dbf [file] [log] [blame]
Shinya Kuribayashi2f5d4142008-03-25 21:30:06 +09001/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
7 * Copyright (C) 1999 by Silicon Graphics, Inc.
8 * Copyright (C) 2001 MIPS Technologies, Inc.
9 * Copyright (C) 2002 Maciej W. Rozycki
10 *
11 * Some useful macros for MIPS assembler code
12 *
13 * Some of the routines below contain useless nops that will be optimized
14 * away by gas in -O mode. These nops are however required to fill delay
15 * slots in noreorder mode.
16 */
17#ifndef __ASM_ASM_H
18#define __ASM_ASM_H
19
20#include <asm/sgidefs.h>
21
22#ifndef CAT
23#ifdef __STDC__
24#define __CAT(str1, str2) str1##str2
25#else
26#define __CAT(str1, str2) str1/**/str2
27#endif
28#define CAT(str1, str2) __CAT(str1, str2)
29#endif
30
31/*
32 * PIC specific declarations
33 * Not used for the kernel but here seems to be the right place.
34 */
35#ifdef __PIC__
36#define CPRESTORE(register) \
37 .cprestore register
38#define CPADD(register) \
39 .cpadd register
40#define CPLOAD(register) \
41 .cpload register
42#else
43#define CPRESTORE(register)
44#define CPADD(register)
45#define CPLOAD(register)
46#endif
47
48/*
49 * LEAF - declare leaf routine
50 */
51#define LEAF(symbol) \
52 .globl symbol; \
53 .align 2; \
54 .type symbol, @function; \
55 .ent symbol, 0; \
56symbol: .frame sp, 0, ra
57
58/*
59 * NESTED - declare nested routine entry point
60 */
61#define NESTED(symbol, framesize, rpc) \
62 .globl symbol; \
63 .align 2; \
64 .type symbol, @function; \
65 .ent symbol, 0; \
66symbol: .frame sp, framesize, rpc
67
68/*
69 * END - mark end of function
70 */
71#define END(function) \
72 .end function; \
73 .size function, .-function
74
75/*
76 * EXPORT - export definition of symbol
77 */
78#define EXPORT(symbol) \
79 .globl symbol; \
80symbol:
81
82/*
83 * FEXPORT - export definition of a function symbol
84 */
85#define FEXPORT(symbol) \
86 .globl symbol; \
87 .type symbol, @function; \
88symbol:
89
90/*
91 * ABS - export absolute symbol
92 */
93#define ABS(symbol,value) \
94 .globl symbol; \
95symbol = value
96
97#define PANIC(msg) \
98 .set push; \
99 .set reorder; \
100 PTR_LA a0, 8f; \
101 jal panic; \
1029: b 9b; \
103 .set pop; \
104 TEXT(msg)
105
106/*
107 * Print formatted string
108 */
109#ifdef CONFIG_PRINTK
110#define PRINT(string) \
111 .set push; \
112 .set reorder; \
113 PTR_LA a0, 8f; \
114 jal printk; \
115 .set pop; \
116 TEXT(string)
117#else
118#define PRINT(string)
119#endif
120
121#define TEXT(msg) \
122 .pushsection .data; \
1238: .asciiz msg; \
124 .popsection;
125
126/*
127 * Build text tables
128 */
129#define TTABLE(string) \
130 .pushsection .text; \
131 .word 1f; \
132 .popsection \
133 .pushsection .data; \
1341: .asciiz string; \
135 .popsection
136
137/*
138 * MIPS IV pref instruction.
139 * Use with .set noreorder only!
140 *
141 * MIPS IV implementations are free to treat this as a nop. The R5000
142 * is one of them. So we should have an option not to use this instruction.
143 */
144#ifdef CONFIG_CPU_HAS_PREFETCH
145
146#define PREF(hint,addr) \
147 .set push; \
148 .set mips4; \
149 pref hint, addr; \
150 .set pop
151
152#define PREFX(hint,addr) \
153 .set push; \
154 .set mips4; \
155 prefx hint, addr; \
156 .set pop
157
158#else /* !CONFIG_CPU_HAS_PREFETCH */
159
160#define PREF(hint, addr)
161#define PREFX(hint, addr)
162
163#endif /* !CONFIG_CPU_HAS_PREFETCH */
164
165/*
166 * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
167 */
168#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
169#define MOVN(rd, rs, rt) \
170 .set push; \
171 .set reorder; \
172 beqz rt, 9f; \
173 move rd, rs; \
174 .set pop; \
1759:
176#define MOVZ(rd, rs, rt) \
177 .set push; \
178 .set reorder; \
179 bnez rt, 9f; \
180 move rd, rs; \
181 .set pop; \
1829:
183#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
184#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
185#define MOVN(rd, rs, rt) \
186 .set push; \
187 .set noreorder; \
188 bnezl rt, 9f; \
189 move rd, rs; \
190 .set pop; \
1919:
192#define MOVZ(rd, rs, rt) \
193 .set push; \
194 .set noreorder; \
195 beqzl rt, 9f; \
196 move rd, rs; \
197 .set pop; \
1989:
199#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
200#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
201 (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
202#define MOVN(rd, rs, rt) \
203 movn rd, rs, rt
204#define MOVZ(rd, rs, rt) \
205 movz rd, rs, rt
206#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
207
208/*
209 * Stack alignment
210 */
211#if (_MIPS_SIM == _MIPS_SIM_ABI32)
212#define ALSZ 7
213#define ALMASK ~7
214#endif
215#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
216#define ALSZ 15
217#define ALMASK ~15
218#endif
219
220/*
221 * Macros to handle different pointer/register sizes for 32/64-bit code
222 */
223
224/*
225 * Size of a register
226 */
227#ifdef __mips64
228#define SZREG 8
229#else
230#define SZREG 4
231#endif
232
233/*
234 * Use the following macros in assemblercode to load/store registers,
235 * pointers etc.
236 */
237#if (_MIPS_SIM == _MIPS_SIM_ABI32)
238#define REG_S sw
239#define REG_L lw
240#define REG_SUBU subu
241#define REG_ADDU addu
242#endif
243#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
244#define REG_S sd
245#define REG_L ld
246#define REG_SUBU dsubu
247#define REG_ADDU daddu
248#endif
249
250/*
251 * How to add/sub/load/store/shift C int variables.
252 */
253#if (_MIPS_SZINT == 32)
254#define INT_ADD add
255#define INT_ADDU addu
256#define INT_ADDI addi
257#define INT_ADDIU addiu
258#define INT_SUB sub
259#define INT_SUBU subu
260#define INT_L lw
261#define INT_S sw
262#define INT_SLL sll
263#define INT_SLLV sllv
264#define INT_SRL srl
265#define INT_SRLV srlv
266#define INT_SRA sra
267#define INT_SRAV srav
268#endif
269
270#if (_MIPS_SZINT == 64)
271#define INT_ADD dadd
272#define INT_ADDU daddu
273#define INT_ADDI daddi
274#define INT_ADDIU daddiu
275#define INT_SUB dsub
276#define INT_SUBU dsubu
277#define INT_L ld
278#define INT_S sd
279#define INT_SLL dsll
280#define INT_SLLV dsllv
281#define INT_SRL dsrl
282#define INT_SRLV dsrlv
283#define INT_SRA dsra
284#define INT_SRAV dsrav
285#endif
286
287/*
288 * How to add/sub/load/store/shift C long variables.
289 */
290#if (_MIPS_SZLONG == 32)
291#define LONG_ADD add
292#define LONG_ADDU addu
293#define LONG_ADDI addi
294#define LONG_ADDIU addiu
295#define LONG_SUB sub
296#define LONG_SUBU subu
297#define LONG_L lw
298#define LONG_S sw
299#define LONG_SLL sll
300#define LONG_SLLV sllv
301#define LONG_SRL srl
302#define LONG_SRLV srlv
303#define LONG_SRA sra
304#define LONG_SRAV srav
305
306#define LONG .word
307#define LONGSIZE 4
308#define LONGMASK 3
309#define LONGLOG 2
310#endif
311
312#if (_MIPS_SZLONG == 64)
313#define LONG_ADD dadd
314#define LONG_ADDU daddu
315#define LONG_ADDI daddi
316#define LONG_ADDIU daddiu
317#define LONG_SUB dsub
318#define LONG_SUBU dsubu
319#define LONG_L ld
320#define LONG_S sd
321#define LONG_SLL dsll
322#define LONG_SLLV dsllv
323#define LONG_SRL dsrl
324#define LONG_SRLV dsrlv
325#define LONG_SRA dsra
326#define LONG_SRAV dsrav
327
328#define LONG .dword
329#define LONGSIZE 8
330#define LONGMASK 7
331#define LONGLOG 3
332#endif
333
334/*
335 * How to add/sub/load/store/shift pointers.
336 */
337#if (_MIPS_SZPTR == 32)
338#define PTR_ADD add
339#define PTR_ADDU addu
340#define PTR_ADDI addi
341#define PTR_ADDIU addiu
342#define PTR_SUB sub
343#define PTR_SUBU subu
344#define PTR_L lw
345#define PTR_S sw
346#define PTR_LA la
347#define PTR_LI li
348#define PTR_SLL sll
349#define PTR_SLLV sllv
350#define PTR_SRL srl
351#define PTR_SRLV srlv
352#define PTR_SRA sra
353#define PTR_SRAV srav
354
355#define PTR_SCALESHIFT 2
356
357#define PTR .word
358#define PTRSIZE 4
359#define PTRLOG 2
360#endif
361
362#if (_MIPS_SZPTR == 64)
363#define PTR_ADD dadd
364#define PTR_ADDU daddu
365#define PTR_ADDI daddi
366#define PTR_ADDIU daddiu
367#define PTR_SUB dsub
368#define PTR_SUBU dsubu
369#define PTR_L ld
370#define PTR_S sd
371#define PTR_LA dla
372#define PTR_LI dli
373#define PTR_SLL dsll
374#define PTR_SLLV dsllv
375#define PTR_SRL dsrl
376#define PTR_SRLV dsrlv
377#define PTR_SRA dsra
378#define PTR_SRAV dsrav
379
380#define PTR_SCALESHIFT 3
381
382#define PTR .dword
383#define PTRSIZE 8
384#define PTRLOG 3
385#endif
386
387/*
388 * Some cp0 registers were extended to 64bit for MIPS III.
389 */
390#if (_MIPS_SIM == _MIPS_SIM_ABI32)
391#define MFC0 mfc0
392#define MTC0 mtc0
393#endif
394#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
395#define MFC0 dmfc0
396#define MTC0 dmtc0
397#endif
398
399#define SSNOP sll zero, zero, 1
400
401#ifdef CONFIG_SGI_IP28
402/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
403#include <asm/cacheops.h>
Zhi-zhou Zhangcb0a6a12012-10-16 15:02:08 +0200404#define R10KCBARRIER(addr) cache CACHE_BARRIER, addr;
Shinya Kuribayashi2f5d4142008-03-25 21:30:06 +0900405#else
406#define R10KCBARRIER(addr)
407#endif
408
409#endif /* __ASM_ASM_H */