blob: b11a94c652fd03effeaa23b551b45da398dd0baf [file] [log] [blame]
Liu Hui-R6434394391fb2011-01-03 22:27:42 +00001/*
2 * (C) Copyright 2010 Freescale Semiconductor, Inc.
3 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23#include <common.h>
24#include <asm/io.h>
25#include <asm/arch/imx-regs.h>
26#include <asm/arch/mx5x_pins.h>
27#include <asm/arch/sys_proto.h>
28#include <asm/arch/crm_regs.h>
29#include <asm/arch/iomux.h>
30#include <asm/errno.h>
Troy Kisky0aff3842012-08-15 10:31:22 +000031#include <asm/imx-common/boot_mode.h>
Liu Hui-R6434394391fb2011-01-03 22:27:42 +000032#include <netdev.h>
33#include <i2c.h>
34#include <mmc.h>
35#include <fsl_esdhc.h>
Stefano Babicbba1b6c2011-10-08 11:00:22 +020036#include <pmic.h>
Liu Hui-R6434394391fb2011-01-03 22:27:42 +000037#include <fsl_pmic.h>
Stefano Babicf7a36472011-08-21 10:58:22 +020038#include <asm/gpio.h>
Liu Hui-R6434394391fb2011-01-03 22:27:42 +000039#include <mc13892.h>
40
41DECLARE_GLOBAL_DATA_PTR;
42
Liu Hui-R6434394391fb2011-01-03 22:27:42 +000043int dram_init(void)
44{
45 /* dram_init must store complete ramsize in gd->ram_size */
Albert ARIBAUDa55d23c2011-07-03 05:55:33 +000046 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
Liu Hui-R6434394391fb2011-01-03 22:27:42 +000047 PHYS_SDRAM_1_SIZE);
48 return 0;
49}
50
51static void setup_iomux_uart(void)
52{
53 /* UART1 RXD */
54 mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2);
55 mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
56 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
57 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
58 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
59 PAD_CTL_ODE_OPENDRAIN_ENABLE);
60 mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1);
61
62 /* UART1 TXD */
63 mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2);
64 mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
65 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
66 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
67 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
68 PAD_CTL_ODE_OPENDRAIN_ENABLE);
69}
70
71static void setup_i2c(unsigned int port_number)
72{
73 switch (port_number) {
74 case 0:
75 /* i2c1 SDA */
76 mxc_request_iomux(MX53_PIN_CSI0_D8,
77 IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
78 mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
79 INPUT_CTL_PATH0);
80 mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
81 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
82 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
83 PAD_CTL_ODE_OPENDRAIN_ENABLE);
84 /* i2c1 SCL */
85 mxc_request_iomux(MX53_PIN_CSI0_D9,
86 IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
87 mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
88 INPUT_CTL_PATH0);
89 mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
90 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
91 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
92 PAD_CTL_ODE_OPENDRAIN_ENABLE);
93 break;
94 case 1:
95 /* i2c2 SDA */
96 mxc_request_iomux(MX53_PIN_KEY_ROW3,
97 IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
98 mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT,
99 INPUT_CTL_PATH0);
100 mxc_iomux_set_pad(MX53_PIN_KEY_ROW3,
101 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
102 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
103 PAD_CTL_ODE_OPENDRAIN_ENABLE);
104
105 /* i2c2 SCL */
106 mxc_request_iomux(MX53_PIN_KEY_COL3,
107 IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
108 mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT,
109 INPUT_CTL_PATH0);
110 mxc_iomux_set_pad(MX53_PIN_KEY_COL3,
111 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
112 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
113 PAD_CTL_ODE_OPENDRAIN_ENABLE);
114 break;
115 default:
116 printf("Warning: Wrong I2C port number\n");
117 break;
118 }
119}
120
121void power_init(void)
122{
123 unsigned int val;
Stefano Babicbba1b6c2011-10-08 11:00:22 +0200124 struct pmic *p;
125
126 pmic_init();
127 p = get_pmic();
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000128
129 /* Set VDDA to 1.25V */
Stefano Babicbba1b6c2011-10-08 11:00:22 +0200130 pmic_reg_read(p, REG_SW_2, &val);
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000131 val &= ~SWX_OUT_MASK;
132 val |= SWX_OUT_1_25;
Stefano Babicbba1b6c2011-10-08 11:00:22 +0200133 pmic_reg_write(p, REG_SW_2, val);
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000134
135 /*
136 * Need increase VCC and VDDA to 1.3V
137 * according to MX53 IC TO2 datasheet.
138 */
139 if (is_soc_rev(CHIP_REV_2_0) == 0) {
140 /* Set VCC to 1.3V for TO2 */
Stefano Babicbba1b6c2011-10-08 11:00:22 +0200141 pmic_reg_read(p, REG_SW_1, &val);
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000142 val &= ~SWX_OUT_MASK;
143 val |= SWX_OUT_1_30;
Stefano Babicbba1b6c2011-10-08 11:00:22 +0200144 pmic_reg_write(p, REG_SW_1, val);
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000145
146 /* Set VDDA to 1.3V for TO2 */
Stefano Babicbba1b6c2011-10-08 11:00:22 +0200147 pmic_reg_read(p, REG_SW_2, &val);
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000148 val &= ~SWX_OUT_MASK;
149 val |= SWX_OUT_1_30;
Stefano Babicbba1b6c2011-10-08 11:00:22 +0200150 pmic_reg_write(p, REG_SW_2, val);
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000151 }
152}
153
154static void setup_iomux_fec(void)
155{
156 /*FEC_MDIO*/
157 mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
158 mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
159 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
160 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
161 PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
162 mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
163
164 /*FEC_MDC*/
165 mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
166 mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
167
168 /* FEC RXD1 */
169 mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
170 mxc_iomux_set_pad(MX53_PIN_FEC_RXD1,
171 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
172
173 /* FEC RXD0 */
174 mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
175 mxc_iomux_set_pad(MX53_PIN_FEC_RXD0,
176 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
177
178 /* FEC TXD1 */
179 mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
180 mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
181
182 /* FEC TXD0 */
183 mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
184 mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
185
186 /* FEC TX_EN */
187 mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
188 mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
189
190 /* FEC TX_CLK */
191 mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
192 mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK,
193 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
194
195 /* FEC RX_ER */
196 mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
197 mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER,
198 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
199
200 /* FEC CRS */
201 mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
202 mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV,
203 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
204}
205
206#ifdef CONFIG_FSL_ESDHC
207struct fsl_esdhc_cfg esdhc_cfg[2] = {
Benoît Thébaudeau16e43f32012-08-13 07:28:16 +0000208 {MMC_SDHC1_BASE_ADDR},
209 {MMC_SDHC3_BASE_ADDR},
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000210};
211
Thierry Reding314284b2012-01-02 01:15:36 +0000212int board_mmc_getcd(struct mmc *mmc)
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000213{
214 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
Thierry Reding314284b2012-01-02 01:15:36 +0000215 int ret;
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000216
Fabio Estevama146dca2011-11-15 05:51:31 +0000217 mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
Ashok Kumar Reddy92550702012-08-28 07:39:38 +0530218 gpio_direction_input(IMX_GPIO_NR(3, 11));
Fabio Estevama146dca2011-11-15 05:51:31 +0000219 mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
Ashok Kumar Reddy92550702012-08-28 07:39:38 +0530220 gpio_direction_input(IMX_GPIO_NR(3, 13));
Fabio Estevama146dca2011-11-15 05:51:31 +0000221
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000222 if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
Ashok Kumar Reddy92550702012-08-28 07:39:38 +0530223 ret = !gpio_get_value(IMX_GPIO_NR(3, 13));
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000224 else
Ashok Kumar Reddy92550702012-08-28 07:39:38 +0530225 ret = !gpio_get_value(IMX_GPIO_NR(3, 11));
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000226
Thierry Reding314284b2012-01-02 01:15:36 +0000227 return ret;
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000228}
229
230int board_mmc_init(bd_t *bis)
231{
232 u32 index;
233 s32 status = 0;
234
235 for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
236 switch (index) {
237 case 0:
238 mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
239 mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
240 mxc_request_iomux(MX53_PIN_SD1_DATA0,
241 IOMUX_CONFIG_ALT0);
242 mxc_request_iomux(MX53_PIN_SD1_DATA1,
243 IOMUX_CONFIG_ALT0);
244 mxc_request_iomux(MX53_PIN_SD1_DATA2,
245 IOMUX_CONFIG_ALT0);
246 mxc_request_iomux(MX53_PIN_SD1_DATA3,
247 IOMUX_CONFIG_ALT0);
248 mxc_request_iomux(MX53_PIN_EIM_DA13,
249 IOMUX_CONFIG_ALT1);
250
251 mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
252 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
253 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
254 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
255 mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
256 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
257 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
258 PAD_CTL_DRV_HIGH);
259 mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
260 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
261 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
262 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
263 mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
264 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
265 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
266 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
267 mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
268 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
269 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
270 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
271 mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
272 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
273 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
274 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
275 break;
276 case 1:
277 mxc_request_iomux(MX53_PIN_ATA_RESET_B,
278 IOMUX_CONFIG_ALT2);
279 mxc_request_iomux(MX53_PIN_ATA_IORDY,
280 IOMUX_CONFIG_ALT2);
281 mxc_request_iomux(MX53_PIN_ATA_DATA8,
282 IOMUX_CONFIG_ALT4);
283 mxc_request_iomux(MX53_PIN_ATA_DATA9,
284 IOMUX_CONFIG_ALT4);
285 mxc_request_iomux(MX53_PIN_ATA_DATA10,
286 IOMUX_CONFIG_ALT4);
287 mxc_request_iomux(MX53_PIN_ATA_DATA11,
288 IOMUX_CONFIG_ALT4);
289 mxc_request_iomux(MX53_PIN_ATA_DATA0,
290 IOMUX_CONFIG_ALT4);
291 mxc_request_iomux(MX53_PIN_ATA_DATA1,
292 IOMUX_CONFIG_ALT4);
293 mxc_request_iomux(MX53_PIN_ATA_DATA2,
294 IOMUX_CONFIG_ALT4);
295 mxc_request_iomux(MX53_PIN_ATA_DATA3,
296 IOMUX_CONFIG_ALT4);
297 mxc_request_iomux(MX53_PIN_EIM_DA11,
298 IOMUX_CONFIG_ALT1);
299
300 mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B,
301 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
302 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
303 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
304 mxc_iomux_set_pad(MX53_PIN_ATA_IORDY,
305 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
306 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
307 PAD_CTL_DRV_HIGH);
308 mxc_iomux_set_pad(MX53_PIN_ATA_DATA8,
309 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
310 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
311 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
312 mxc_iomux_set_pad(MX53_PIN_ATA_DATA9,
313 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
314 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
315 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
316 mxc_iomux_set_pad(MX53_PIN_ATA_DATA10,
317 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
318 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
319 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
320 mxc_iomux_set_pad(MX53_PIN_ATA_DATA11,
321 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
322 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
323 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
324 mxc_iomux_set_pad(MX53_PIN_ATA_DATA0,
325 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
326 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
327 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
328 mxc_iomux_set_pad(MX53_PIN_ATA_DATA1,
329 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
330 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
331 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
332 mxc_iomux_set_pad(MX53_PIN_ATA_DATA2,
333 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
334 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
335 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
336 mxc_iomux_set_pad(MX53_PIN_ATA_DATA3,
337 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
338 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
339 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
340
341 break;
342 default:
343 printf("Warning: you configured more ESDHC controller"
344 "(%d) as supported by the board(2)\n",
345 CONFIG_SYS_FSL_ESDHC_NUM);
346 return status;
347 }
348 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
349 }
350
351 return status;
352}
353#endif
354
355int board_early_init_f(void)
356{
357 setup_iomux_uart();
358 setup_iomux_fec();
359
360 return 0;
361}
362
363int board_init(void)
364{
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000365 /* address of boot parameters */
366 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
367
368 return 0;
369}
370
Troy Kisky0aff3842012-08-15 10:31:22 +0000371#ifdef CONFIG_CMD_BMODE
372static const struct boot_mode board_boot_modes[] = {
373 /* 4 bit bus width */
374 {"mmc0", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
375 {"mmc1", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
376 {NULL, 0},
377};
378#endif
379
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000380int board_late_init(void)
381{
382 setup_i2c(1);
383 power_init();
384
Troy Kisky0aff3842012-08-15 10:31:22 +0000385#ifdef CONFIG_CMD_BMODE
386 add_board_boot_modes(board_boot_modes);
387#endif
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000388 return 0;
389}
390
391int checkboard(void)
392{
Jason Liu51958902011-04-22 02:55:42 +0000393 puts("Board: MX53EVK\n");
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000394
Liu Hui-R6434394391fb2011-01-03 22:27:42 +0000395 return 0;
396}