blob: 43de2e11193315178ea6ce9591c7b8deda7ac776 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Ben Whitten5aaef602017-11-23 13:47:47 +00002/*
3 * Configuation settings for the WB45N CPU Module.
Ben Whitten5aaef602017-11-23 13:47:47 +00004 */
5
6#ifndef __CONFIG_H__
7#define __CONFIG_H__
8
9#include <asm/hardware.h>
10
Ben Whitten5aaef602017-11-23 13:47:47 +000011/* ARM asynchronous clock */
12#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
13#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
14
15#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
16#define CONFIG_SETUP_MEMORY_TAGS
17#define CONFIG_INITRD_TAG
18#define CONFIG_SKIP_LOWLEVEL_INIT
19
20/* general purpose I/O */
21#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
22#define CONFIG_AT91_GPIO
23
24/* serial console */
25#define CONFIG_ATMEL_USART
26#define CONFIG_USART_BASE ATMEL_BASE_DBGU
27#define CONFIG_USART_ID ATMEL_ID_SYS
28
29/*
30 * BOOTP options
31 */
32#define CONFIG_BOOTP_BOOTFILESIZE
Ben Whitten5aaef602017-11-23 13:47:47 +000033
34/* SDRAM */
Ben Whitten5aaef602017-11-23 13:47:47 +000035#define CONFIG_SYS_SDRAM_BASE 0x20000000
36#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 MB */
37
38#define CONFIG_SYS_INIT_SP_ADDR \
39 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
40
41/* NAND flash */
Ben Whitten5aaef602017-11-23 13:47:47 +000042#define CONFIG_SYS_MAX_NAND_DEVICE 1
43#define CONFIG_SYS_NAND_BASE 0x40000000
44/* our ALE is AD21 */
45#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
46/* our CLE is AD22 */
47#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
48#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4
49#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
50
Ben Whitten5aaef602017-11-23 13:47:47 +000051#define CONFIG_RBTREE
52#define CONFIG_LZO
53
54/* Ethernet */
55#define CONFIG_MACB
56#define CONFIG_RMII
57#define CONFIG_NET_RETRY_COUNT 20
58#define CONFIG_MACB_SEARCH_PHY
59#define CONFIG_ETHADDR C0:EE:40:00:00:00
60#define CONFIG_ENV_OVERWRITE 1
61
62/* System */
63#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
64#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
65#define CONFIG_SYS_MEMTEST_END 0x23e00000
66
67#ifdef CONFIG_SYS_USE_NANDFLASH
68/* bootstrap + u-boot + env + linux in nandflash */
69#define CONFIG_ENV_OFFSET 0xa0000
70#define CONFIG_ENV_OFFSET_REDUND 0xc0000
71#define CONFIG_ENV_SIZE 0x20000 /* 1 block = 128 kB */
72
73#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xe0000 0x280000; " \
74 "run _mtd; bootm"
75
76#define MTDIDS_DEFAULT "nand0=atmel_nand"
77#define MTDPARTS_DEFAULT "mtdparts=atmel_nand:" \
78 "128K(at91bs)," \
79 "512K(u-boot)," \
80 "128K(u-boot-env)," \
81 "128K(redund-env)," \
82 "2560K(kernel-a)," \
83 "2560K(kernel-b)," \
84 "38912K(rootfs-a)," \
85 "38912K(rootfs-b)," \
86 "46208K(user)," \
87 "512K(logs)"
88
89#else
90#error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH'
91#endif
92
93#define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk " \
94 "rw noinitrd mem=64M " \
95 "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6"
96
97#define CONFIG_EXTRA_ENV_SETTINGS \
98 "_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \
99 "autoload=no\0" \
100 "autostart=no\0" \
101 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
102 "\0"
103
104#define CONFIG_SYS_CBSIZE 256
105#define CONFIG_SYS_MAXARGS 16
Ben Whitten5aaef602017-11-23 13:47:47 +0000106
107/*
108 * Size of malloc() pool
109 */
110#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000)
111
112/* SPL */
Ben Whitten5aaef602017-11-23 13:47:47 +0000113#define CONFIG_SPL_MAX_SIZE 0x6000
114#define CONFIG_SPL_STACK 0x308000
115
116#define CONFIG_SPL_BSS_START_ADDR 0x20000000
117#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
118#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
119#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
120
121#define CONFIG_SYS_MONITOR_LEN (512 << 10)
122
123#define CONFIG_SYS_MASTER_CLOCK 132096000
124#define CONFIG_SYS_AT91_PLLA 0x20c73f03
125#define CONFIG_SYS_MCKR 0x1301
126#define CONFIG_SYS_MCKR_CSS 0x1302
127
128#define CONFIG_SPL_NAND_DRIVERS
129#define CONFIG_SPL_NAND_BASE
130#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
131#define CONFIG_SYS_NAND_5_ADDR_CYCLE
132#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
133#define CONFIG_SYS_NAND_PAGE_COUNT 64
134#define CONFIG_SYS_NAND_OOBSIZE 64
135#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
136#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
Ben Whitten5aaef602017-11-23 13:47:47 +0000137
138#endif /* __CONFIG_H__ */