blob: fa6abeb546bc138d7a98d9ed213133d257543807 [file] [log] [blame]
wdenk149dded2003-09-10 18:20:28 +00001/*
2 * URB OHCI HCD (Host Controller Driver) for USB on the S3C2400.
3 *
4 * (C) Copyright 2003
5 * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
6 *
wdenk9d46ea42005-03-14 23:56:42 +00007 * Note: Much of this code has been derived from Linux 2.4
8 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
9 * (C) Copyright 2000-2002 David Brownell
10 *
wdenk149dded2003-09-10 18:20:28 +000011 * See file CREDITS for list of people who contributed to this
12 * project.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 * MA 02111-1307 USA
28 *
wdenk149dded2003-09-10 18:20:28 +000029 */
30/*
31 * IMPORTANT NOTES
32 * 1 - you MUST define LITTLEENDIAN in the configuration file for the
33 * board or this driver will NOT work!
34 * 2 - this driver is intended for use with USB Mass Storage Devices
35 * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
36 */
37
38#include <common.h>
wdenka2663ea2003-12-07 18:32:37 +000039/* #include <pci.h> no PCI on the S3C24X0 */
wdenk149dded2003-09-10 18:20:28 +000040
41#ifdef CONFIG_USB_OHCI
42
wdenka2663ea2003-12-07 18:32:37 +000043#if defined(CONFIG_S3C2400)
wdenk149dded2003-09-10 18:20:28 +000044#include <s3c2400.h>
wdenka2663ea2003-12-07 18:32:37 +000045#elif defined(CONFIG_S3C2410)
46#include <s3c2410.h>
47#endif
48
wdenk149dded2003-09-10 18:20:28 +000049#include <malloc.h>
50#include <usb.h>
51#include "usb_ohci.h"
52
53#define OHCI_USE_NPS /* force NoPowerSwitching mode */
54#undef OHCI_VERBOSE_DEBUG /* not always helpful */
55
56
57/* For initializing controller (mask in an HCFS mode too) */
58#define OHCI_CONTROL_INIT \
59 (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
60
wdenk149dded2003-09-10 18:20:28 +000061#define readl(a) (*((vu_long *)(a)))
62#define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a))
63
64#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
65
66#undef DEBUG
67#ifdef DEBUG
68#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
69#else
70#define dbg(format, arg...) do {} while(0)
71#endif /* DEBUG */
72#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
73#undef SHOW_INFO
74#ifdef SHOW_INFO
75#define info(format, arg...) printf("INFO: " format "\n", ## arg)
76#else
77#define info(format, arg...) do {} while(0)
78#endif
79
80#define m16_swap(x) swap_16(x)
81#define m32_swap(x) swap_32(x)
82
83/* global ohci_t */
84static ohci_t gohci;
85/* this must be aligned to a 256 byte boundary */
86struct ohci_hcca ghcca[1];
87/* a pointer to the aligned storage */
88struct ohci_hcca *phcca;
89/* this allocates EDs for all possible endpoints */
90struct ohci_device ohci_dev;
91/* urb_priv */
92urb_priv_t urb_priv;
dzu8a42eac2003-09-29 21:55:54 +000093/* RHSC flag */
94int got_rhsc;
95/* device which was disconnected */
96struct usb_device *devgone;
Wolfgang Denk9c998aa2005-07-21 11:57:57 +020097/* flag guarding URB transation */
98int urb_finished = 0;
wdenk149dded2003-09-10 18:20:28 +000099
100/*-------------------------------------------------------------------------*/
101
102/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
103 * The erratum (#4) description is incorrect. AMD's workaround waits
104 * till some bits (mostly reserved) are clear; ok for all revs.
105 */
106#define OHCI_QUIRK_AMD756 0xabcd
107#define read_roothub(hc, register, mask) ({ \
108 u32 temp = readl (&hc->regs->roothub.register); \
109 if (hc->flags & OHCI_QUIRK_AMD756) \
110 while (temp & mask) \
111 temp = readl (&hc->regs->roothub.register); \
112 temp; })
113
114static u32 roothub_a (struct ohci *hc)
115 { return read_roothub (hc, a, 0xfc0fe000); }
116static inline u32 roothub_b (struct ohci *hc)
117 { return readl (&hc->regs->roothub.b); }
118static inline u32 roothub_status (struct ohci *hc)
119 { return readl (&hc->regs->roothub.status); }
120static u32 roothub_portstatus (struct ohci *hc, int i)
121 { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
122
123
124/* forward declaration */
125static int hc_interrupt (void);
126static void
127td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
128 int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
129
130/*-------------------------------------------------------------------------*
131 * URB support functions
132 *-------------------------------------------------------------------------*/
133
134/* free HCD-private data associated with this URB */
135
136static void urb_free_priv (urb_priv_t * urb)
137{
138 int i;
139 int last;
140 struct td * td;
141
142 last = urb->length - 1;
143 if (last >= 0) {
144 for (i = 0; i <= last; i++) {
145 td = urb->td[i];
146 if (td) {
147 td->usb_dev = NULL;
148 urb->td[i] = NULL;
149 }
150 }
151 }
152}
153
154/*-------------------------------------------------------------------------*/
155
156#ifdef DEBUG
157static int sohci_get_current_frame_number (struct usb_device * dev);
158
159/* debug| print the main components of an URB
160 * small: 0) header + data packets 1) just header */
161
162static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
163 int transfer_len, struct devrequest * setup, char * str, int small)
164{
165 urb_priv_t * purb = &urb_priv;
166
167 dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
168 str,
wdenk42d1f032003-10-15 23:53:47 +0000169 sohci_get_current_frame_number (dev),
170 usb_pipedevice (pipe),
171 usb_pipeendpoint (pipe),
172 usb_pipeout (pipe)? 'O': 'I',
173 usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
174 (usb_pipecontrol (pipe)? "CTRL": "BULK"),
175 purb->actual_length,
176 transfer_len, dev->status);
wdenk149dded2003-09-10 18:20:28 +0000177#ifdef OHCI_VERBOSE_DEBUG
178 if (!small) {
179 int i, len;
180
181 if (usb_pipecontrol (pipe)) {
182 printf (__FILE__ ": cmd(8):");
183 for (i = 0; i < 8 ; i++)
184 printf (" %02x", ((__u8 *) setup) [i]);
185 printf ("\n");
186 }
187 if (transfer_len > 0 && buffer) {
188 printf (__FILE__ ": data(%d/%d):",
189 purb->actual_length,
190 transfer_len);
191 len = usb_pipeout (pipe)?
192 transfer_len: purb->actual_length;
193 for (i = 0; i < 16 && i < len; i++)
194 printf (" %02x", ((__u8 *) buffer) [i]);
195 printf ("%s\n", i < len? "...": "");
196 }
197 }
198#endif
199}
200
201/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
202void ep_print_int_eds (ohci_t *ohci, char * str) {
203 int i, j;
204 __u32 * ed_p;
205 for (i= 0; i < 32; i++) {
206 j = 5;
207 ed_p = &(ohci->hcca->int_table [i]);
208 if (*ed_p == 0)
209 continue;
210 printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
211 while (*ed_p != 0 && j--) {
212 ed_t *ed = (ed_t *)m32_swap(ed_p);
213 printf (" ed: %4x;", ed->hwINFO);
214 ed_p = &ed->hwNextED;
215 }
216 printf ("\n");
217 }
218}
219
220static void ohci_dump_intr_mask (char *label, __u32 mask)
221{
222 dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
223 label,
224 mask,
225 (mask & OHCI_INTR_MIE) ? " MIE" : "",
226 (mask & OHCI_INTR_OC) ? " OC" : "",
227 (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
228 (mask & OHCI_INTR_FNO) ? " FNO" : "",
229 (mask & OHCI_INTR_UE) ? " UE" : "",
230 (mask & OHCI_INTR_RD) ? " RD" : "",
231 (mask & OHCI_INTR_SF) ? " SF" : "",
232 (mask & OHCI_INTR_WDH) ? " WDH" : "",
233 (mask & OHCI_INTR_SO) ? " SO" : ""
234 );
235}
236
237static void maybe_print_eds (char *label, __u32 value)
238{
239 ed_t *edp = (ed_t *)value;
240
241 if (value) {
242 dbg ("%s %08x", label, value);
243 dbg ("%08x", edp->hwINFO);
244 dbg ("%08x", edp->hwTailP);
245 dbg ("%08x", edp->hwHeadP);
246 dbg ("%08x", edp->hwNextED);
247 }
248}
249
250static char * hcfs2string (int state)
251{
252 switch (state) {
253 case OHCI_USB_RESET: return "reset";
254 case OHCI_USB_RESUME: return "resume";
255 case OHCI_USB_OPER: return "operational";
256 case OHCI_USB_SUSPEND: return "suspend";
257 }
258 return "?";
259}
260
261/* dump control and status registers */
262static void ohci_dump_status (ohci_t *controller)
263{
264 struct ohci_regs *regs = controller->regs;
265 __u32 temp;
266
267 temp = readl (&regs->revision) & 0xff;
268 if (temp != 0x10)
269 dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
270
271 temp = readl (&regs->control);
272 dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
273 (temp & OHCI_CTRL_RWE) ? " RWE" : "",
274 (temp & OHCI_CTRL_RWC) ? " RWC" : "",
275 (temp & OHCI_CTRL_IR) ? " IR" : "",
276 hcfs2string (temp & OHCI_CTRL_HCFS),
277 (temp & OHCI_CTRL_BLE) ? " BLE" : "",
278 (temp & OHCI_CTRL_CLE) ? " CLE" : "",
279 (temp & OHCI_CTRL_IE) ? " IE" : "",
280 (temp & OHCI_CTRL_PLE) ? " PLE" : "",
281 temp & OHCI_CTRL_CBSR
282 );
283
284 temp = readl (&regs->cmdstatus);
285 dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
286 (temp & OHCI_SOC) >> 16,
287 (temp & OHCI_OCR) ? " OCR" : "",
288 (temp & OHCI_BLF) ? " BLF" : "",
289 (temp & OHCI_CLF) ? " CLF" : "",
290 (temp & OHCI_HCR) ? " HCR" : ""
291 );
292
293 ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
294 ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
295
296 maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
297
298 maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
299 maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
300
301 maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
302 maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
303
304 maybe_print_eds ("donehead", readl (&regs->donehead));
305}
306
307static void ohci_dump_roothub (ohci_t *controller, int verbose)
308{
309 __u32 temp, ndp, i;
310
311 temp = roothub_a (controller);
312 ndp = (temp & RH_A_NDP);
313
314 if (verbose) {
315 dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
316 ((temp & RH_A_POTPGT) >> 24) & 0xff,
317 (temp & RH_A_NOCP) ? " NOCP" : "",
318 (temp & RH_A_OCPM) ? " OCPM" : "",
319 (temp & RH_A_DT) ? " DT" : "",
320 (temp & RH_A_NPS) ? " NPS" : "",
321 (temp & RH_A_PSM) ? " PSM" : "",
322 ndp
323 );
324 temp = roothub_b (controller);
325 dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
326 temp,
327 (temp & RH_B_PPCM) >> 16,
328 (temp & RH_B_DR)
329 );
330 temp = roothub_status (controller);
331 dbg ("roothub.status: %08x%s%s%s%s%s%s",
332 temp,
333 (temp & RH_HS_CRWE) ? " CRWE" : "",
334 (temp & RH_HS_OCIC) ? " OCIC" : "",
335 (temp & RH_HS_LPSC) ? " LPSC" : "",
336 (temp & RH_HS_DRWE) ? " DRWE" : "",
337 (temp & RH_HS_OCI) ? " OCI" : "",
338 (temp & RH_HS_LPS) ? " LPS" : ""
339 );
340 }
341
342 for (i = 0; i < ndp; i++) {
343 temp = roothub_portstatus (controller, i);
344 dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
345 i,
346 temp,
347 (temp & RH_PS_PRSC) ? " PRSC" : "",
348 (temp & RH_PS_OCIC) ? " OCIC" : "",
349 (temp & RH_PS_PSSC) ? " PSSC" : "",
350 (temp & RH_PS_PESC) ? " PESC" : "",
351 (temp & RH_PS_CSC) ? " CSC" : "",
352
353 (temp & RH_PS_LSDA) ? " LSDA" : "",
354 (temp & RH_PS_PPS) ? " PPS" : "",
355 (temp & RH_PS_PRS) ? " PRS" : "",
356 (temp & RH_PS_POCI) ? " POCI" : "",
357 (temp & RH_PS_PSS) ? " PSS" : "",
358
359 (temp & RH_PS_PES) ? " PES" : "",
360 (temp & RH_PS_CCS) ? " CCS" : ""
361 );
362 }
363}
364
365static void ohci_dump (ohci_t *controller, int verbose)
366{
367 dbg ("OHCI controller usb-%s state", controller->slot_name);
368
369 /* dumps some of the state we know about */
370 ohci_dump_status (controller);
371 if (verbose)
372 ep_print_int_eds (controller, "hcca");
373 dbg ("hcca frame #%04x", controller->hcca->frame_no);
374 ohci_dump_roothub (controller, 1);
375}
376
377
378#endif /* DEBUG */
379
380/*-------------------------------------------------------------------------*
381 * Interface functions (URB)
382 *-------------------------------------------------------------------------*/
383
384/* get a transfer request */
385
386int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
387 int transfer_len, struct devrequest *setup, int interval)
388{
389 ohci_t *ohci;
390 ed_t * ed;
391 urb_priv_t *purb_priv;
392 int i, size = 0;
393
394 ohci = &gohci;
395
396 /* when controller's hung, permit only roothub cleanup attempts
397 * such as powering down ports */
398 if (ohci->disabled) {
399 err("sohci_submit_job: EPIPE");
400 return -1;
401 }
402
Wolfgang Denk9c998aa2005-07-21 11:57:57 +0200403 /* if we have an unfinished URB from previous transaction let's
404 * fail and scream as quickly as possible so as not to corrupt
405 * further communication */
406 if (!urb_finished) {
407 err("sohci_submit_job: URB NOT FINISHED");
408 return -1;
409 }
410 /* we're about to begin a new transaction here so mark the URB unfinished */
411 urb_finished = 0;
412
wdenk149dded2003-09-10 18:20:28 +0000413 /* every endpoint has a ed, locate and fill it */
414 if (!(ed = ep_add_ed (dev, pipe))) {
415 err("sohci_submit_job: ENOMEM");
416 return -1;
417 }
418
419 /* for the private part of the URB we need the number of TDs (size) */
420 switch (usb_pipetype (pipe)) {
421 case PIPE_BULK: /* one TD for every 4096 Byte */
422 size = (transfer_len - 1) / 4096 + 1;
423 break;
424 case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
425 size = (transfer_len == 0)? 2:
426 (transfer_len - 1) / 4096 + 3;
427 break;
428 }
429
430 if (size >= (N_URB_TD - 1)) {
431 err("need %d TDs, only have %d", size, N_URB_TD);
432 return -1;
433 }
434 purb_priv = &urb_priv;
435 purb_priv->pipe = pipe;
436
437 /* fill the private part of the URB */
438 purb_priv->length = size;
439 purb_priv->ed = ed;
440 purb_priv->actual_length = 0;
441
442 /* allocate the TDs */
443 /* note that td[0] was allocated in ep_add_ed */
444 for (i = 0; i < size; i++) {
445 purb_priv->td[i] = td_alloc (dev);
446 if (!purb_priv->td[i]) {
447 purb_priv->length = i;
448 urb_free_priv (purb_priv);
449 err("sohci_submit_job: ENOMEM");
450 return -1;
451 }
452 }
453
454 if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
455 urb_free_priv (purb_priv);
456 err("sohci_submit_job: EINVAL");
457 return -1;
458 }
459
460 /* link the ed into a chain if is not already */
461 if (ed->state != ED_OPER)
462 ep_link (ohci, ed);
463
464 /* fill the TDs and link it to the ed */
465 td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
466
467 return 0;
468}
469
470/*-------------------------------------------------------------------------*/
471
472#ifdef DEBUG
473/* tell us the current USB frame number */
474
475static int sohci_get_current_frame_number (struct usb_device *usb_dev)
476{
477 ohci_t *ohci = &gohci;
478
479 return m16_swap (ohci->hcca->frame_no);
480}
481#endif
482
483/*-------------------------------------------------------------------------*
484 * ED handling functions
485 *-------------------------------------------------------------------------*/
486
487/* link an ed into one of the HC chains */
488
489static int ep_link (ohci_t *ohci, ed_t *edi)
490{
491 volatile ed_t *ed = edi;
492
493 ed->state = ED_OPER;
494
495 switch (ed->type) {
496 case PIPE_CONTROL:
497 ed->hwNextED = 0;
498 if (ohci->ed_controltail == NULL) {
499 writel (ed, &ohci->regs->ed_controlhead);
500 } else {
501 ohci->ed_controltail->hwNextED = m32_swap (ed);
502 }
503 ed->ed_prev = ohci->ed_controltail;
504 if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
505 !ohci->ed_rm_list[1] && !ohci->sleeping) {
506 ohci->hc_control |= OHCI_CTRL_CLE;
507 writel (ohci->hc_control, &ohci->regs->control);
508 }
509 ohci->ed_controltail = edi;
510 break;
511
512 case PIPE_BULK:
513 ed->hwNextED = 0;
514 if (ohci->ed_bulktail == NULL) {
515 writel (ed, &ohci->regs->ed_bulkhead);
516 } else {
517 ohci->ed_bulktail->hwNextED = m32_swap (ed);
518 }
519 ed->ed_prev = ohci->ed_bulktail;
520 if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
521 !ohci->ed_rm_list[1] && !ohci->sleeping) {
522 ohci->hc_control |= OHCI_CTRL_BLE;
523 writel (ohci->hc_control, &ohci->regs->control);
524 }
525 ohci->ed_bulktail = edi;
526 break;
527 }
528 return 0;
529}
530
531/*-------------------------------------------------------------------------*/
532
533/* unlink an ed from one of the HC chains.
534 * just the link to the ed is unlinked.
535 * the link from the ed still points to another operational ed or 0
536 * so the HC can eventually finish the processing of the unlinked ed */
537
538static int ep_unlink (ohci_t *ohci, ed_t *ed)
539{
540 ed->hwINFO |= m32_swap (OHCI_ED_SKIP);
541
542 switch (ed->type) {
543 case PIPE_CONTROL:
544 if (ed->ed_prev == NULL) {
545 if (!ed->hwNextED) {
546 ohci->hc_control &= ~OHCI_CTRL_CLE;
547 writel (ohci->hc_control, &ohci->regs->control);
548 }
549 writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
550 } else {
551 ed->ed_prev->hwNextED = ed->hwNextED;
552 }
553 if (ohci->ed_controltail == ed) {
554 ohci->ed_controltail = ed->ed_prev;
555 } else {
556 ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
557 }
558 break;
559
560 case PIPE_BULK:
561 if (ed->ed_prev == NULL) {
562 if (!ed->hwNextED) {
563 ohci->hc_control &= ~OHCI_CTRL_BLE;
564 writel (ohci->hc_control, &ohci->regs->control);
565 }
566 writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
567 } else {
568 ed->ed_prev->hwNextED = ed->hwNextED;
569 }
570 if (ohci->ed_bulktail == ed) {
571 ohci->ed_bulktail = ed->ed_prev;
572 } else {
573 ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
574 }
575 break;
576 }
577 ed->state = ED_UNLINK;
578 return 0;
579}
580
581
582/*-------------------------------------------------------------------------*/
583
584/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
585 * but the USB stack is a little bit stateless so we do it at every transaction
586 * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
587 * in all other cases the state is left unchanged
588 * the ed info fields are setted anyway even though most of them should not change */
589
590static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
591{
592 td_t *td;
593 ed_t *ed_ret;
594 volatile ed_t *ed;
595
596 ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
597 (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
598
599 if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
600 err("ep_add_ed: pending delete");
601 /* pending delete request */
602 return NULL;
603 }
604
605 if (ed->state == ED_NEW) {
606 ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
wdenk42d1f032003-10-15 23:53:47 +0000607 /* dummy td; end of td list for ed */
wdenk149dded2003-09-10 18:20:28 +0000608 td = td_alloc (usb_dev);
609 ed->hwTailP = m32_swap (td);
610 ed->hwHeadP = ed->hwTailP;
611 ed->state = ED_UNLINK;
612 ed->type = usb_pipetype (pipe);
613 ohci_dev.ed_cnt++;
614 }
615
616 ed->hwINFO = m32_swap (usb_pipedevice (pipe)
617 | usb_pipeendpoint (pipe) << 7
618 | (usb_pipeisoc (pipe)? 0x8000: 0)
619 | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
620 | usb_pipeslow (pipe) << 13
621 | usb_maxpacket (usb_dev, pipe) << 16);
622
623 return ed_ret;
624}
625
626/*-------------------------------------------------------------------------*
627 * TD handling functions
628 *-------------------------------------------------------------------------*/
629
630/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
631
632static void td_fill (ohci_t *ohci, unsigned int info,
633 void *data, int len,
634 struct usb_device *dev, int index, urb_priv_t *urb_priv)
635{
636 volatile td_t *td, *td_pt;
637#ifdef OHCI_FILL_TRACE
638 int i;
639#endif
640
641 if (index > urb_priv->length) {
642 err("index > length");
643 return;
644 }
645 /* use this td as the next dummy */
646 td_pt = urb_priv->td [index];
647 td_pt->hwNextTD = 0;
648
649 /* fill the old dummy TD */
650 td = urb_priv->td [index] = (td_t *)(m32_swap (urb_priv->ed->hwTailP) & ~0xf);
651
652 td->ed = urb_priv->ed;
653 td->next_dl_td = NULL;
654 td->index = index;
655 td->data = (__u32)data;
656#ifdef OHCI_FILL_TRACE
657 if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) {
658 for (i = 0; i < len; i++)
659 printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
660 printf("\n");
661 }
662#endif
663 if (!len)
664 data = 0;
665
666 td->hwINFO = m32_swap (info);
667 td->hwCBP = m32_swap (data);
668 if (data)
669 td->hwBE = m32_swap (data + len - 1);
670 else
671 td->hwBE = 0;
672 td->hwNextTD = m32_swap (td_pt);
wdenk149dded2003-09-10 18:20:28 +0000673
674 /* append to queue */
675 td->ed->hwTailP = td->hwNextTD;
676}
677
678/*-------------------------------------------------------------------------*/
679
680/* prepare all TDs of a transfer */
681
682static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
683 int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
684{
685 ohci_t *ohci = &gohci;
686 int data_len = transfer_len;
687 void *data;
688 int cnt = 0;
689 __u32 info = 0;
wdenk42d1f032003-10-15 23:53:47 +0000690 unsigned int toggle = 0;
wdenk149dded2003-09-10 18:20:28 +0000691
692 /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
wdenk42d1f032003-10-15 23:53:47 +0000693 if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
694 toggle = TD_T_TOGGLE;
wdenk149dded2003-09-10 18:20:28 +0000695 } else {
wdenk42d1f032003-10-15 23:53:47 +0000696 toggle = TD_T_DATA0;
wdenk149dded2003-09-10 18:20:28 +0000697 usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
698 }
699 urb->td_cnt = 0;
700 if (data_len)
701 data = buffer;
702 else
703 data = 0;
704
705 switch (usb_pipetype (pipe)) {
706 case PIPE_BULK:
707 info = usb_pipeout (pipe)?
708 TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
709 while(data_len > 4096) {
710 td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
711 data += 4096; data_len -= 4096; cnt++;
712 }
713 info = usb_pipeout (pipe)?
714 TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
715 td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
716 cnt++;
717
718 if (!ohci->sleeping)
719 writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
720 break;
721
722 case PIPE_CONTROL:
723 info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
724 td_fill (ohci, info, setup, 8, dev, cnt++, urb);
725 if (data_len > 0) {
726 info = usb_pipeout (pipe)?
727 TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
728 /* NOTE: mishandles transfers >8K, some >4K */
729 td_fill (ohci, info, data, data_len, dev, cnt++, urb);
730 }
731 info = usb_pipeout (pipe)?
732 TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
733 td_fill (ohci, info, data, 0, dev, cnt++, urb);
734 if (!ohci->sleeping)
735 writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
736 break;
737 }
738 if (urb->length != cnt)
739 dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
740}
741
742/*-------------------------------------------------------------------------*
743 * Done List handling functions
744 *-------------------------------------------------------------------------*/
745
746
747/* calculate the transfer length and update the urb */
748
749static void dl_transfer_length(td_t * td)
750{
751 __u32 tdINFO, tdBE, tdCBP;
wdenk42d1f032003-10-15 23:53:47 +0000752 urb_priv_t *lurb_priv = &urb_priv;
wdenk149dded2003-09-10 18:20:28 +0000753
754 tdINFO = m32_swap (td->hwINFO);
wdenk42d1f032003-10-15 23:53:47 +0000755 tdBE = m32_swap (td->hwBE);
756 tdCBP = m32_swap (td->hwCBP);
wdenk149dded2003-09-10 18:20:28 +0000757
758
759 if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
760 ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
761 if (tdBE != 0) {
762 if (td->hwCBP == 0)
763 lurb_priv->actual_length += tdBE - td->data + 1;
764 else
765 lurb_priv->actual_length += tdCBP - td->data;
766 }
767 }
768}
769
770/*-------------------------------------------------------------------------*/
771
772/* replies to the request have to be on a FIFO basis so
773 * we reverse the reversed done-list */
774
775static td_t * dl_reverse_done_list (ohci_t *ohci)
776{
777 __u32 td_list_hc;
778 td_t *td_rev = NULL;
779 td_t *td_list = NULL;
wdenk42d1f032003-10-15 23:53:47 +0000780 urb_priv_t *lurb_priv = NULL;
wdenk149dded2003-09-10 18:20:28 +0000781
782 td_list_hc = m32_swap (ohci->hcca->done_head) & 0xfffffff0;
783 ohci->hcca->done_head = 0;
784
785 while (td_list_hc) {
786 td_list = (td_t *)td_list_hc;
787
788 if (TD_CC_GET (m32_swap (td_list->hwINFO))) {
789 lurb_priv = &urb_priv;
790 dbg(" USB-error/status: %x : %p",
791 TD_CC_GET (m32_swap (td_list->hwINFO)), td_list);
792 if (td_list->ed->hwHeadP & m32_swap (0x1)) {
793 if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
794 td_list->ed->hwHeadP =
795 (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & m32_swap (0xfffffff0)) |
796 (td_list->ed->hwHeadP & m32_swap (0x2));
797 lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
798 } else
799 td_list->ed->hwHeadP &= m32_swap (0xfffffff2);
800 }
801 }
802
803 td_list->next_dl_td = td_rev;
804 td_rev = td_list;
805 td_list_hc = m32_swap (td_list->hwNextTD) & 0xfffffff0;
806 }
Wolfgang Denk9c998aa2005-07-21 11:57:57 +0200807
wdenk149dded2003-09-10 18:20:28 +0000808 return td_list;
809}
810
811/*-------------------------------------------------------------------------*/
812
813/* td done list */
814static int dl_done_list (ohci_t *ohci, td_t *td_list)
815{
wdenk42d1f032003-10-15 23:53:47 +0000816 td_t *td_list_next = NULL;
wdenk149dded2003-09-10 18:20:28 +0000817 ed_t *ed;
818 int cc = 0;
819 int stat = 0;
820 /* urb_t *urb; */
821 urb_priv_t *lurb_priv;
wdenk42d1f032003-10-15 23:53:47 +0000822 __u32 tdINFO, edHeadP, edTailP;
wdenk149dded2003-09-10 18:20:28 +0000823
wdenk42d1f032003-10-15 23:53:47 +0000824 while (td_list) {
825 td_list_next = td_list->next_dl_td;
wdenk149dded2003-09-10 18:20:28 +0000826
wdenk42d1f032003-10-15 23:53:47 +0000827 lurb_priv = &urb_priv;
828 tdINFO = m32_swap (td_list->hwINFO);
wdenk149dded2003-09-10 18:20:28 +0000829
wdenk42d1f032003-10-15 23:53:47 +0000830 ed = td_list->ed;
wdenk149dded2003-09-10 18:20:28 +0000831
wdenk42d1f032003-10-15 23:53:47 +0000832 dl_transfer_length(td_list);
wdenk149dded2003-09-10 18:20:28 +0000833
wdenk42d1f032003-10-15 23:53:47 +0000834 /* error code of transfer */
835 cc = TD_CC_GET (tdINFO);
wdenk149dded2003-09-10 18:20:28 +0000836 if (cc != 0) {
837 dbg("ConditionCode %#x", cc);
838 stat = cc_to_error[cc];
839 }
840
Wolfgang Denk9c998aa2005-07-21 11:57:57 +0200841 /* see if this done list makes for all TD's of current URB,
842 * and mark the URB finished if so */
843 if (++(lurb_priv->td_cnt) == lurb_priv->length) {
844 if ((ed->state & (ED_OPER | ED_UNLINK)))
845 urb_finished = 1;
846 else
847 dbg("dl_done_list: strange.., ED state %x, ed->state\n");
848 } else
849 dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt,
850 lurb_priv->length);
851
wdenk42d1f032003-10-15 23:53:47 +0000852 if (ed->state != ED_NEW) {
853 edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0;
854 edTailP = m32_swap (ed->hwTailP);
wdenk149dded2003-09-10 18:20:28 +0000855
856 /* unlink eds if they are not busy */
wdenk42d1f032003-10-15 23:53:47 +0000857 if ((edHeadP == edTailP) && (ed->state == ED_OPER))
858 ep_unlink (ohci, ed);
859 }
wdenk149dded2003-09-10 18:20:28 +0000860
wdenk42d1f032003-10-15 23:53:47 +0000861 td_list = td_list_next;
862 }
wdenk149dded2003-09-10 18:20:28 +0000863 return stat;
864}
865
866/*-------------------------------------------------------------------------*
867 * Virtual Root Hub
868 *-------------------------------------------------------------------------*/
869
870/* Device descriptor */
871static __u8 root_hub_dev_des[] =
872{
873 0x12, /* __u8 bLength; */
874 0x01, /* __u8 bDescriptorType; Device */
875 0x10, /* __u16 bcdUSB; v1.1 */
876 0x01,
877 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
878 0x00, /* __u8 bDeviceSubClass; */
879 0x00, /* __u8 bDeviceProtocol; */
880 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
881 0x00, /* __u16 idVendor; */
882 0x00,
883 0x00, /* __u16 idProduct; */
wdenk42d1f032003-10-15 23:53:47 +0000884 0x00,
wdenk149dded2003-09-10 18:20:28 +0000885 0x00, /* __u16 bcdDevice; */
wdenk42d1f032003-10-15 23:53:47 +0000886 0x00,
wdenk149dded2003-09-10 18:20:28 +0000887 0x00, /* __u8 iManufacturer; */
888 0x01, /* __u8 iProduct; */
889 0x00, /* __u8 iSerialNumber; */
890 0x01 /* __u8 bNumConfigurations; */
891};
892
893
894/* Configuration descriptor */
895static __u8 root_hub_config_des[] =
896{
897 0x09, /* __u8 bLength; */
898 0x02, /* __u8 bDescriptorType; Configuration */
899 0x19, /* __u16 wTotalLength; */
900 0x00,
901 0x01, /* __u8 bNumInterfaces; */
902 0x01, /* __u8 bConfigurationValue; */
903 0x00, /* __u8 iConfiguration; */
904 0x40, /* __u8 bmAttributes;
wdenk42d1f032003-10-15 23:53:47 +0000905 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
wdenk149dded2003-09-10 18:20:28 +0000906 0x00, /* __u8 MaxPower; */
907
908 /* interface */
909 0x09, /* __u8 if_bLength; */
910 0x04, /* __u8 if_bDescriptorType; Interface */
911 0x00, /* __u8 if_bInterfaceNumber; */
912 0x00, /* __u8 if_bAlternateSetting; */
913 0x01, /* __u8 if_bNumEndpoints; */
914 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
915 0x00, /* __u8 if_bInterfaceSubClass; */
916 0x00, /* __u8 if_bInterfaceProtocol; */
917 0x00, /* __u8 if_iInterface; */
918
919 /* endpoint */
920 0x07, /* __u8 ep_bLength; */
921 0x05, /* __u8 ep_bDescriptorType; Endpoint */
922 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
wdenk42d1f032003-10-15 23:53:47 +0000923 0x03, /* __u8 ep_bmAttributes; Interrupt */
924 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
925 0x00,
wdenk149dded2003-09-10 18:20:28 +0000926 0xff /* __u8 ep_bInterval; 255 ms */
927};
928
929static unsigned char root_hub_str_index0[] =
930{
931 0x04, /* __u8 bLength; */
932 0x03, /* __u8 bDescriptorType; String-descriptor */
933 0x09, /* __u8 lang ID */
934 0x04, /* __u8 lang ID */
935};
936
937static unsigned char root_hub_str_index1[] =
938{
939 28, /* __u8 bLength; */
940 0x03, /* __u8 bDescriptorType; String-descriptor */
941 'O', /* __u8 Unicode */
942 0, /* __u8 Unicode */
943 'H', /* __u8 Unicode */
944 0, /* __u8 Unicode */
945 'C', /* __u8 Unicode */
946 0, /* __u8 Unicode */
947 'I', /* __u8 Unicode */
948 0, /* __u8 Unicode */
949 ' ', /* __u8 Unicode */
950 0, /* __u8 Unicode */
951 'R', /* __u8 Unicode */
952 0, /* __u8 Unicode */
953 'o', /* __u8 Unicode */
954 0, /* __u8 Unicode */
955 'o', /* __u8 Unicode */
956 0, /* __u8 Unicode */
957 't', /* __u8 Unicode */
958 0, /* __u8 Unicode */
959 ' ', /* __u8 Unicode */
960 0, /* __u8 Unicode */
961 'H', /* __u8 Unicode */
962 0, /* __u8 Unicode */
963 'u', /* __u8 Unicode */
964 0, /* __u8 Unicode */
965 'b', /* __u8 Unicode */
966 0, /* __u8 Unicode */
967};
968
969/* Hub class-specific descriptor is constructed dynamically */
970
971
972/*-------------------------------------------------------------------------*/
973
974#define OK(x) len = (x); break
975#ifdef DEBUG
976#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
977#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
978#else
979#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
980#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
981#endif
982#define RD_RH_STAT roothub_status(&gohci)
983#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
984
985/* request to virtual root hub */
986
dzu8a42eac2003-09-29 21:55:54 +0000987int rh_check_port_status(ohci_t *controller)
988{
989 __u32 temp, ndp, i;
990 int res;
991
992 res = -1;
993 temp = roothub_a (controller);
994 ndp = (temp & RH_A_NDP);
995 for (i = 0; i < ndp; i++) {
996 temp = roothub_portstatus (controller, i);
997 /* check for a device disconnect */
998 if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
999 (RH_PS_PESC | RH_PS_CSC)) &&
1000 ((temp & RH_PS_CCS) == 0)) {
1001 res = i;
1002 break;
1003 }
1004 }
1005 return res;
1006}
1007
1008static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
1009 void *buffer, int transfer_len, struct devrequest *cmd)
wdenk149dded2003-09-10 18:20:28 +00001010{
1011 void * data = buffer;
1012 int leni = transfer_len;
1013 int len = 0;
1014 int stat = 0;
1015 __u32 datab[4];
1016 __u8 *data_buf = (__u8 *)datab;
wdenk42d1f032003-10-15 23:53:47 +00001017 __u16 bmRType_bReq;
wdenk149dded2003-09-10 18:20:28 +00001018 __u16 wValue;
1019 __u16 wIndex;
1020 __u16 wLength;
1021
1022#ifdef DEBUG
1023urb_priv.actual_length = 0;
1024pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
1025#else
1026 wait_ms(1);
1027#endif
1028 if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
1029 info("Root-Hub submit IRQ: NOT implemented");
1030 return 0;
1031 }
1032
1033 bmRType_bReq = cmd->requesttype | (cmd->request << 8);
1034 wValue = m16_swap (cmd->value);
1035 wIndex = m16_swap (cmd->index);
1036 wLength = m16_swap (cmd->length);
1037
1038 info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
1039 dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
1040
1041 switch (bmRType_bReq) {
1042 /* Request Destination:
1043 without flags: Device,
1044 RH_INTERFACE: interface,
1045 RH_ENDPOINT: endpoint,
1046 RH_CLASS means HUB here,
1047 RH_OTHER | RH_CLASS almost ever means HUB_PORT here
1048 */
1049
1050 case RH_GET_STATUS:
1051 *(__u16 *) data_buf = m16_swap (1); OK (2);
1052 case RH_GET_STATUS | RH_INTERFACE:
1053 *(__u16 *) data_buf = m16_swap (0); OK (2);
1054 case RH_GET_STATUS | RH_ENDPOINT:
1055 *(__u16 *) data_buf = m16_swap (0); OK (2);
1056 case RH_GET_STATUS | RH_CLASS:
1057 *(__u32 *) data_buf = m32_swap (
1058 RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
1059 OK (4);
1060 case RH_GET_STATUS | RH_OTHER | RH_CLASS:
1061 *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
1062
1063 case RH_CLEAR_FEATURE | RH_ENDPOINT:
1064 switch (wValue) {
1065 case (RH_ENDPOINT_STALL): OK (0);
1066 }
1067 break;
1068
1069 case RH_CLEAR_FEATURE | RH_CLASS:
1070 switch (wValue) {
1071 case RH_C_HUB_LOCAL_POWER:
1072 OK(0);
1073 case (RH_C_HUB_OVER_CURRENT):
1074 WR_RH_STAT(RH_HS_OCIC); OK (0);
1075 }
1076 break;
1077
1078 case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
1079 switch (wValue) {
1080 case (RH_PORT_ENABLE):
1081 WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
1082 case (RH_PORT_SUSPEND):
1083 WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
1084 case (RH_PORT_POWER):
1085 WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
1086 case (RH_C_PORT_CONNECTION):
1087 WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
1088 case (RH_C_PORT_ENABLE):
1089 WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
1090 case (RH_C_PORT_SUSPEND):
1091 WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
1092 case (RH_C_PORT_OVER_CURRENT):
1093 WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
1094 case (RH_C_PORT_RESET):
1095 WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
1096 }
1097 break;
1098
1099 case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
1100 switch (wValue) {
1101 case (RH_PORT_SUSPEND):
1102 WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
1103 case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
1104 if (RD_RH_PORTSTAT & RH_PS_CCS)
1105 WR_RH_PORTSTAT (RH_PS_PRS);
1106 OK (0);
1107 case (RH_PORT_POWER):
1108 WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
1109 case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
1110 if (RD_RH_PORTSTAT & RH_PS_CCS)
1111 WR_RH_PORTSTAT (RH_PS_PES );
1112 OK (0);
1113 }
1114 break;
1115
1116 case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
1117
1118 case RH_GET_DESCRIPTOR:
1119 switch ((wValue & 0xff00) >> 8) {
1120 case (0x01): /* device descriptor */
1121 len = min_t(unsigned int,
1122 leni,
1123 min_t(unsigned int,
1124 sizeof (root_hub_dev_des),
1125 wLength));
1126 data_buf = root_hub_dev_des; OK(len);
1127 case (0x02): /* configuration descriptor */
1128 len = min_t(unsigned int,
1129 leni,
1130 min_t(unsigned int,
1131 sizeof (root_hub_config_des),
1132 wLength));
1133 data_buf = root_hub_config_des; OK(len);
1134 case (0x03): /* string descriptors */
1135 if(wValue==0x0300) {
1136 len = min_t(unsigned int,
1137 leni,
1138 min_t(unsigned int,
1139 sizeof (root_hub_str_index0),
1140 wLength));
1141 data_buf = root_hub_str_index0;
1142 OK(len);
1143 }
1144 if(wValue==0x0301) {
1145 len = min_t(unsigned int,
1146 leni,
1147 min_t(unsigned int,
1148 sizeof (root_hub_str_index1),
1149 wLength));
1150 data_buf = root_hub_str_index1;
1151 OK(len);
1152 }
1153 default:
1154 stat = USB_ST_STALLED;
1155 }
1156 break;
1157
1158 case RH_GET_DESCRIPTOR | RH_CLASS:
1159 {
1160 __u32 temp = roothub_a (&gohci);
1161
1162 data_buf [0] = 9; /* min length; */
1163 data_buf [1] = 0x29;
1164 data_buf [2] = temp & RH_A_NDP;
1165 data_buf [3] = 0;
1166 if (temp & RH_A_PSM) /* per-port power switching? */
1167 data_buf [3] |= 0x1;
1168 if (temp & RH_A_NOCP) /* no overcurrent reporting? */
1169 data_buf [3] |= 0x10;
1170 else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
1171 data_buf [3] |= 0x8;
1172
1173 /* corresponds to data_buf[4-7] */
1174 datab [1] = 0;
1175 data_buf [5] = (temp & RH_A_POTPGT) >> 24;
1176 temp = roothub_b (&gohci);
1177 data_buf [7] = temp & RH_B_DR;
1178 if (data_buf [2] < 7) {
1179 data_buf [8] = 0xff;
1180 } else {
1181 data_buf [0] += 2;
1182 data_buf [8] = (temp & RH_B_DR) >> 8;
1183 data_buf [10] = data_buf [9] = 0xff;
1184 }
1185
1186 len = min_t(unsigned int, leni,
1187 min_t(unsigned int, data_buf [0], wLength));
1188 OK (len);
1189 }
1190
1191 case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
1192
1193 case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
1194
1195 default:
1196 dbg ("unsupported root hub command");
1197 stat = USB_ST_STALLED;
1198 }
1199
1200#ifdef DEBUG
1201 ohci_dump_roothub (&gohci, 1);
1202#else
1203 wait_ms(1);
1204#endif
1205
1206 len = min_t(int, len, leni);
1207 if (data != data_buf)
1208 memcpy (data, data_buf, len);
wdenk42d1f032003-10-15 23:53:47 +00001209 dev->act_len = len;
wdenk149dded2003-09-10 18:20:28 +00001210 dev->status = stat;
1211
1212#ifdef DEBUG
1213 if (transfer_len)
1214 urb_priv.actual_length = transfer_len;
1215 pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
1216#else
1217 wait_ms(1);
1218#endif
1219
1220 return stat;
1221}
1222
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001223
1224
wdenk149dded2003-09-10 18:20:28 +00001225/*-------------------------------------------------------------------------*/
1226
1227/* common code for handling submit messages - used for all but root hub */
1228/* accesses. */
1229int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1230 int transfer_len, struct devrequest *setup, int interval)
1231{
1232 int stat = 0;
1233 int maxsize = usb_maxpacket(dev, pipe);
1234 int timeout;
1235
dzu8a42eac2003-09-29 21:55:54 +00001236 /* device pulled? Shortcut the action. */
1237 if (devgone == dev) {
1238 dev->status = USB_ST_CRC_ERR;
1239 return 0;
1240 }
1241
wdenk149dded2003-09-10 18:20:28 +00001242#ifdef DEBUG
1243 urb_priv.actual_length = 0;
1244 pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
1245#else
1246 wait_ms(1);
1247#endif
1248 if (!maxsize) {
1249 err("submit_common_message: pipesize for pipe %lx is zero",
1250 pipe);
1251 return -1;
1252 }
1253
1254 if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
1255 err("sohci_submit_job failed");
1256 return -1;
1257 }
1258
1259 wait_ms(10);
1260 /* ohci_dump_status(&gohci); */
wdenk42d1f032003-10-15 23:53:47 +00001261
wdenka43278a2003-09-11 19:48:06 +00001262 /* allow more time for a BULK device to react - some are slow */
wdenkb0639ca2003-09-17 22:48:07 +00001263#define BULK_TO 5000 /* timeout in milliseconds */
wdenka43278a2003-09-11 19:48:06 +00001264 if (usb_pipetype (pipe) == PIPE_BULK)
1265 timeout = BULK_TO;
1266 else
1267 timeout = 100;
1268
wdenk149dded2003-09-10 18:20:28 +00001269 /* wait for it to complete */
wdenk149dded2003-09-10 18:20:28 +00001270 for (;;) {
1271 /* check whether the controller is done */
1272 stat = hc_interrupt();
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001273
wdenk149dded2003-09-10 18:20:28 +00001274 if (stat < 0) {
dzu8a42eac2003-09-29 21:55:54 +00001275 stat = USB_ST_CRC_ERR;
wdenk149dded2003-09-10 18:20:28 +00001276 break;
1277 }
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001278
1279 /* NOTE: since we are not interrupt driven in U-Boot and always
1280 * handle only one URB at a time, we cannot assume the
1281 * transaction finished on the first successful return from
1282 * hc_interrupt().. unless the flag for current URB is set,
1283 * meaning that all TD's to/from device got actually
1284 * transferred and processed. If the current URB is not
1285 * finished we need to re-iterate this loop so as
1286 * hc_interrupt() gets called again as there needs to be some
1287 * more TD's to process still */
1288 if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
wdenk149dded2003-09-10 18:20:28 +00001289 /* 0xff is returned for an SF-interrupt */
1290 break;
1291 }
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001292
wdenk149dded2003-09-10 18:20:28 +00001293 if (--timeout) {
1294 wait_ms(1);
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001295 if (!urb_finished)
1296 dbg("\%");
1297
wdenk149dded2003-09-10 18:20:28 +00001298 } else {
dzu8a42eac2003-09-29 21:55:54 +00001299 err("CTL:TIMEOUT ");
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001300 dbg("submit_common_msg: TO status %x\n", stat);
dzu8a42eac2003-09-29 21:55:54 +00001301 stat = USB_ST_CRC_ERR;
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001302 urb_finished = 1;
wdenk149dded2003-09-10 18:20:28 +00001303 break;
1304 }
1305 }
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001306
1307#if 0
dzu8a42eac2003-09-29 21:55:54 +00001308 /* we got an Root Hub Status Change interrupt */
1309 if (got_rhsc) {
1310#ifdef DEBUG
1311 ohci_dump_roothub (&gohci, 1);
1312#endif
1313 got_rhsc = 0;
1314 /* abuse timeout */
1315 timeout = rh_check_port_status(&gohci);
1316 if (timeout >= 0) {
1317#if 0 /* this does nothing useful, but leave it here in case that changes */
1318 /* the called routine adds 1 to the passed value */
1319 usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
1320#endif
1321 /*
1322 * XXX
1323 * This is potentially dangerous because it assumes
1324 * that only one device is ever plugged in!
1325 */
1326 devgone = dev;
1327 }
1328 }
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001329#endif
dzu8a42eac2003-09-29 21:55:54 +00001330
wdenk149dded2003-09-10 18:20:28 +00001331 dev->status = stat;
wdenk42d1f032003-10-15 23:53:47 +00001332 dev->act_len = transfer_len;
wdenk149dded2003-09-10 18:20:28 +00001333
1334#ifdef DEBUG
1335 pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
1336#else
1337 wait_ms(1);
1338#endif
1339
1340 /* free TDs in urb_priv */
1341 urb_free_priv (&urb_priv);
1342 return 0;
1343}
1344
1345/* submit routines called from usb.c */
1346int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1347 int transfer_len)
1348{
1349 info("submit_bulk_msg");
1350 return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
1351}
1352
1353int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1354 int transfer_len, struct devrequest *setup)
1355{
1356 int maxsize = usb_maxpacket(dev, pipe);
1357
1358 info("submit_control_msg");
1359#ifdef DEBUG
1360 urb_priv.actual_length = 0;
1361 pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
1362#else
1363 wait_ms(1);
1364#endif
1365 if (!maxsize) {
1366 err("submit_control_message: pipesize for pipe %lx is zero",
1367 pipe);
1368 return -1;
1369 }
dzu8a42eac2003-09-29 21:55:54 +00001370 if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
1371 gohci.rh.dev = dev;
wdenk149dded2003-09-10 18:20:28 +00001372 /* root hub - redirect */
1373 return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
1374 setup);
dzu8a42eac2003-09-29 21:55:54 +00001375 }
wdenk149dded2003-09-10 18:20:28 +00001376
1377 return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
1378}
1379
1380int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1381 int transfer_len, int interval)
1382{
1383 info("submit_int_msg");
1384 return -1;
1385}
1386
1387/*-------------------------------------------------------------------------*
1388 * HC functions
1389 *-------------------------------------------------------------------------*/
1390
1391/* reset the HC and BUS */
1392
1393static int hc_reset (ohci_t *ohci)
1394{
1395 int timeout = 30;
1396 int smm_timeout = 50; /* 0,5 sec */
1397
1398 if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
1399 writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
1400 info("USB HC TakeOver from SMM");
1401 while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
1402 wait_ms (10);
1403 if (--smm_timeout == 0) {
1404 err("USB HC TakeOver failed!");
1405 return -1;
1406 }
1407 }
1408 }
1409
1410 /* Disable HC interrupts */
1411 writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
1412
1413 dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
1414 ohci->slot_name,
1415 readl (&ohci->regs->control));
1416
wdenk42d1f032003-10-15 23:53:47 +00001417 /* Reset USB (needed by some controllers) */
wdenk149dded2003-09-10 18:20:28 +00001418 writel (0, &ohci->regs->control);
1419
1420 /* HC Reset requires max 10 us delay */
1421 writel (OHCI_HCR, &ohci->regs->cmdstatus);
1422 while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
1423 if (--timeout == 0) {
1424 err("USB HC reset timed out!");
1425 return -1;
1426 }
1427 udelay (1);
1428 }
1429 return 0;
1430}
1431
1432/*-------------------------------------------------------------------------*/
1433
1434/* Start an OHCI controller, set the BUS operational
1435 * enable interrupts
1436 * connect the virtual root hub */
1437
1438static int hc_start (ohci_t * ohci)
1439{
wdenk42d1f032003-10-15 23:53:47 +00001440 __u32 mask;
1441 unsigned int fminterval;
wdenk149dded2003-09-10 18:20:28 +00001442
1443 ohci->disabled = 1;
1444
1445 /* Tell the controller where the control and bulk lists are
1446 * The lists are empty now. */
1447
1448 writel (0, &ohci->regs->ed_controlhead);
1449 writel (0, &ohci->regs->ed_bulkhead);
1450
1451 writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
1452
wdenk42d1f032003-10-15 23:53:47 +00001453 fminterval = 0x2edf;
wdenk149dded2003-09-10 18:20:28 +00001454 writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
1455 fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
1456 writel (fminterval, &ohci->regs->fminterval);
1457 writel (0x628, &ohci->regs->lsthresh);
1458
wdenk42d1f032003-10-15 23:53:47 +00001459 /* start controller operations */
1460 ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
wdenk149dded2003-09-10 18:20:28 +00001461 ohci->disabled = 0;
wdenk42d1f032003-10-15 23:53:47 +00001462 writel (ohci->hc_control, &ohci->regs->control);
wdenk149dded2003-09-10 18:20:28 +00001463
dzu8a42eac2003-09-29 21:55:54 +00001464 /* disable all interrupts */
1465 mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
1466 OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
1467 OHCI_INTR_OC | OHCI_INTR_MIE);
1468 writel (mask, &ohci->regs->intrdisable);
1469 /* clear all interrupts */
1470 mask &= ~OHCI_INTR_MIE;
wdenk149dded2003-09-10 18:20:28 +00001471 writel (mask, &ohci->regs->intrstatus);
dzu8a42eac2003-09-29 21:55:54 +00001472 /* Choose the interrupts we care about now - but w/o MIE */
1473 mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
1474 writel (mask, &ohci->regs->intrenable);
wdenk149dded2003-09-10 18:20:28 +00001475
1476#ifdef OHCI_USE_NPS
1477 /* required for AMD-756 and some Mac platforms */
1478 writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
1479 &ohci->regs->roothub.a);
1480 writel (RH_HS_LPSC, &ohci->regs->roothub.status);
1481#endif /* OHCI_USE_NPS */
1482
1483#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
1484 /* POTPGT delay is bits 24-31, in 2 ms units. */
1485 mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
1486
1487 /* connect the virtual root hub */
1488 ohci->rh.devnum = 0;
1489
1490 return 0;
1491}
1492
1493/*-------------------------------------------------------------------------*/
1494
1495/* an interrupt happens */
1496
1497static int
1498hc_interrupt (void)
1499{
1500 ohci_t *ohci = &gohci;
1501 struct ohci_regs *regs = ohci->regs;
wdenk42d1f032003-10-15 23:53:47 +00001502 int ints;
wdenk149dded2003-09-10 18:20:28 +00001503 int stat = -1;
1504
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001505 if ((ohci->hcca->done_head != 0) &&
1506 !(m32_swap (ohci->hcca->done_head) & 0x01)) {
1507
wdenk149dded2003-09-10 18:20:28 +00001508 ints = OHCI_INTR_WDH;
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001509
1510 } else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
1511 ohci->disabled++;
1512 err ("%s device removed!", ohci->slot_name);
1513 return -1;
1514
1515 } else if ((ints &= readl (&regs->intrenable)) == 0) {
1516 dbg("hc_interrupt: returning..\n");
1517 return 0xff;
wdenk149dded2003-09-10 18:20:28 +00001518 }
1519
1520 /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
1521
dzu8a42eac2003-09-29 21:55:54 +00001522 if (ints & OHCI_INTR_RHSC) {
1523 got_rhsc = 1;
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001524 stat = 0xff;
dzu8a42eac2003-09-29 21:55:54 +00001525 }
1526
wdenk149dded2003-09-10 18:20:28 +00001527 if (ints & OHCI_INTR_UE) {
1528 ohci->disabled++;
1529 err ("OHCI Unrecoverable Error, controller usb-%s disabled",
1530 ohci->slot_name);
1531 /* e.g. due to PCI Master/Target Abort */
1532
1533#ifdef DEBUG
1534 ohci_dump (ohci, 1);
1535#else
1536 wait_ms(1);
1537#endif
1538 /* FIXME: be optimistic, hope that bug won't repeat often. */
1539 /* Make some non-interrupt context restart the controller. */
1540 /* Count and limit the retries though; either hardware or */
1541 /* software errors can go forever... */
1542 hc_reset (ohci);
1543 return -1;
1544 }
1545
1546 if (ints & OHCI_INTR_WDH) {
1547 wait_ms(1);
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001548
wdenk149dded2003-09-10 18:20:28 +00001549 writel (OHCI_INTR_WDH, &regs->intrdisable);
1550 stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
1551 writel (OHCI_INTR_WDH, &regs->intrenable);
1552 }
1553
1554 if (ints & OHCI_INTR_SO) {
1555 dbg("USB Schedule overrun\n");
1556 writel (OHCI_INTR_SO, &regs->intrenable);
1557 stat = -1;
1558 }
1559
1560 /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
1561 if (ints & OHCI_INTR_SF) {
1562 unsigned int frame = m16_swap (ohci->hcca->frame_no) & 1;
1563 wait_ms(1);
1564 writel (OHCI_INTR_SF, &regs->intrdisable);
1565 if (ohci->ed_rm_list[frame] != NULL)
1566 writel (OHCI_INTR_SF, &regs->intrenable);
1567 stat = 0xff;
1568 }
1569
1570 writel (ints, &regs->intrstatus);
1571 return stat;
1572}
1573
1574/*-------------------------------------------------------------------------*/
1575
1576/*-------------------------------------------------------------------------*/
1577
1578/* De-allocate all resources.. */
1579
1580static void hc_release_ohci (ohci_t *ohci)
1581{
1582 dbg ("USB HC release ohci usb-%s", ohci->slot_name);
1583
1584 if (!ohci->disabled)
1585 hc_reset (ohci);
1586}
1587
1588/*-------------------------------------------------------------------------*/
1589
1590/*
1591 * low level initalisation routine, called from usb.c
1592 */
1593static char ohci_inited = 0;
1594
1595int usb_lowlevel_init(void)
1596{
1597 S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
1598 S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
1599
wdenk42d1f032003-10-15 23:53:47 +00001600 /*
1601 * Set the 48 MHz UPLL clocking. Values are taken from
1602 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
1603 */
1604 clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
1605 gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */
wdenk149dded2003-09-10 18:20:28 +00001606
wdenk42d1f032003-10-15 23:53:47 +00001607 /*
1608 * Enable USB host clock.
1609 */
1610 clk_power->CLKCON |= (1 << 4);
wdenk149dded2003-09-10 18:20:28 +00001611
1612 memset (&gohci, 0, sizeof (ohci_t));
1613 memset (&urb_priv, 0, sizeof (urb_priv_t));
1614
1615 /* align the storage */
1616 if ((__u32)&ghcca[0] & 0xff) {
1617 err("HCCA not aligned!!");
1618 return -1;
1619 }
1620 phcca = &ghcca[0];
1621 info("aligned ghcca %p", phcca);
1622 memset(&ohci_dev, 0, sizeof(struct ohci_device));
1623 if ((__u32)&ohci_dev.ed[0] & 0x7) {
1624 err("EDs not aligned!!");
1625 return -1;
1626 }
1627 memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
1628 if ((__u32)gtd & 0x7) {
1629 err("TDs not aligned!!");
1630 return -1;
1631 }
1632 ptd = gtd;
1633 gohci.hcca = phcca;
wdenk42d1f032003-10-15 23:53:47 +00001634 memset (phcca, 0, sizeof (struct ohci_hcca));
wdenk149dded2003-09-10 18:20:28 +00001635
1636 gohci.disabled = 1;
1637 gohci.sleeping = 0;
1638 gohci.irq = -1;
1639 gohci.regs = (struct ohci_regs *)S3C24X0_USB_HOST_BASE;
1640
1641 gohci.flags = 0;
1642 gohci.slot_name = "s3c2400";
1643
1644 if (hc_reset (&gohci) < 0) {
1645 hc_release_ohci (&gohci);
wdenk42d1f032003-10-15 23:53:47 +00001646 /* Initialization failed */
1647 clk_power->CLKCON &= ~(1 << 4);
wdenk149dded2003-09-10 18:20:28 +00001648 return -1;
1649 }
1650
1651 /* FIXME this is a second HC reset; why?? */
1652 writel (gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
1653 wait_ms (10);
1654
1655 if (hc_start (&gohci) < 0) {
1656 err ("can't start usb-%s", gohci.slot_name);
1657 hc_release_ohci (&gohci);
wdenk42d1f032003-10-15 23:53:47 +00001658 /* Initialization failed */
1659 clk_power->CLKCON &= ~(1 << 4);
wdenk149dded2003-09-10 18:20:28 +00001660 return -1;
1661 }
1662
1663#ifdef DEBUG
1664 ohci_dump (&gohci, 1);
1665#else
1666 wait_ms(1);
1667#endif
1668 ohci_inited = 1;
Wolfgang Denk9c998aa2005-07-21 11:57:57 +02001669 urb_finished = 1;
1670
wdenk149dded2003-09-10 18:20:28 +00001671 return 0;
1672}
1673
1674int usb_lowlevel_stop(void)
1675{
1676 S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
1677
1678 /* this gets called really early - before the controller has */
1679 /* even been initialized! */
1680 if (!ohci_inited)
1681 return 0;
1682 /* TODO release any interrupts, etc. */
1683 /* call hc_release_ohci() here ? */
1684 hc_reset (&gohci);
1685 /* may not want to do this */
1686 clk_power->CLKCON &= ~(1 << 4);
1687 return 0;
1688}
1689
1690#endif /* CONFIG_USB_OHCI */