Simon Glass | 18739e2 | 2014-11-14 18:18:43 -0700 | [diff] [blame] | 1 | /* |
| 2 | * From Coreboot file of same name |
| 3 | * |
| 4 | * Copyright (C) 2007-2009 coresystems GmbH |
| 5 | * 2012 secunet Security Networks AG |
| 6 | * |
| 7 | * SPDX-License-Identifier: GPL-2.0 |
| 8 | */ |
| 9 | |
| 10 | #ifndef _ASM_SPEEDSTEP_H |
| 11 | #define _ASM_SPEEDSTEP_H |
| 12 | |
| 13 | /* Magic value used to locate speedstep configuration in the device tree */ |
| 14 | #define SPEEDSTEP_APIC_MAGIC 0xACAC |
| 15 | |
| 16 | /* MWAIT coordination I/O base address. This must match |
| 17 | * the \_PR_.CPU0 PM base address. |
| 18 | */ |
| 19 | #define PMB0_BASE 0x510 |
| 20 | |
| 21 | /* PMB1: I/O port that triggers SMI once cores are in the same state. |
| 22 | * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4] |
| 23 | */ |
| 24 | #define PMB1_BASE 0x800 |
| 25 | |
| 26 | struct sst_state { |
| 27 | uint8_t dynfsb:1; /* whether this is SLFM */ |
| 28 | uint8_t nonint:1; /* add .5 to ratio */ |
| 29 | uint8_t ratio:6; |
| 30 | uint8_t vid; |
| 31 | uint8_t is_turbo; |
| 32 | uint8_t is_slfm; |
| 33 | uint32_t power; |
| 34 | }; |
| 35 | #define SPEEDSTEP_RATIO_SHIFT 8 |
| 36 | #define SPEEDSTEP_RATIO_DYNFSB_SHIFT (7 + SPEEDSTEP_RATIO_SHIFT) |
| 37 | #define SPEEDSTEP_RATIO_DYNFSB (1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT) |
| 38 | #define SPEEDSTEP_RATIO_NONINT_SHIFT (6 + SPEEDSTEP_RATIO_SHIFT) |
| 39 | #define SPEEDSTEP_RATIO_NONINT (1 << SPEEDSTEP_RATIO_NONINT_SHIFT) |
| 40 | #define SPEEDSTEP_RATIO_VALUE_MASK (0x1f << SPEEDSTEP_RATIO_SHIFT) |
| 41 | #define SPEEDSTEP_VID_MASK 0x3f |
| 42 | #define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){ \ |
| 43 | 0, /* dynfsb won't be read. */ \ |
| 44 | ((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0, \ |
| 45 | (((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK) \ |
| 46 | >> SPEEDSTEP_RATIO_SHIFT), \ |
| 47 | (val & mask) & SPEEDSTEP_VID_MASK, \ |
| 48 | 0, /* not turbo by default */ \ |
| 49 | 0, /* not slfm by default */ \ |
| 50 | 0 /* power is hardcoded in software. */ \ |
| 51 | }) |
| 52 | #define SPEEDSTEP_ENCODE_STATE(state) ( \ |
| 53 | ((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) | \ |
| 54 | ((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) | \ |
| 55 | ((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) | \ |
| 56 | ((uint16_t)(state).vid & SPEEDSTEP_VID_MASK)) |
| 57 | #define SPEEDSTEP_DOUBLE_RATIO(state) ( \ |
| 58 | ((uint8_t)(state).ratio * 2) + (state).nonint) |
| 59 | |
| 60 | struct sst_params { |
| 61 | struct sst_state slfm; |
| 62 | struct sst_state min; |
| 63 | struct sst_state max; |
| 64 | struct sst_state turbo; |
| 65 | }; |
| 66 | |
| 67 | /* Looking at core2's spec, the highest normal bus ratio for an eist enabled |
| 68 | processor is 14, the lowest is always 6. This makes 5 states with the |
| 69 | minimal step width of 2. With turbo mode and super LFM we have at most 7. */ |
| 70 | #define SPEEDSTEP_MAX_NORMAL_STATES 5 |
| 71 | #define SPEEDSTEP_MAX_STATES (SPEEDSTEP_MAX_NORMAL_STATES + 2) |
| 72 | struct sst_table { |
| 73 | /* Table of p-states for EMTTM and ACPI by decreasing performance. */ |
| 74 | struct sst_state states[SPEEDSTEP_MAX_STATES]; |
| 75 | int num_states; |
| 76 | }; |
| 77 | |
| 78 | void speedstep_gen_pstates(struct sst_table *); |
| 79 | |
| 80 | #define SPEEDSTEP_MAX_POWER_YONAH 31000 |
| 81 | #define SPEEDSTEP_MIN_POWER_YONAH 13100 |
| 82 | #define SPEEDSTEP_MAX_POWER_MEROM 35000 |
| 83 | #define SPEEDSTEP_MIN_POWER_MEROM 25000 |
| 84 | #define SPEEDSTEP_SLFM_POWER_MEROM 12000 |
| 85 | #define SPEEDSTEP_MAX_POWER_PENRYN 35000 |
| 86 | #define SPEEDSTEP_MIN_POWER_PENRYN 15000 |
| 87 | #define SPEEDSTEP_SLFM_POWER_PENRYN 12000 |
| 88 | |
| 89 | #endif |