Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / 56124508cec17cb493ef82d3ad5545077361f38a / . / drivers / mmc / Kconfig
blob: 197aa82040d3428e17fa5141d2a49b694b965d63 [file] [log] [blame]
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +0900[diff] [blame]1menu "MMC Host controller Support"
2
Maxime Ripard7a777f62015-10-15 22:04:05 +0200[diff] [blame]3config MMC
Masahiro Yamadac2726992016-12-07 22:10:26 +0900[diff] [blame]4 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
Adam Ford1811a922018-02-06 12:43:56 -0600[diff] [blame]6 select HAVE_BLOCK_DEVICE
Maxime Ripard7a777f62015-10-15 22:04:05 +0200[diff] [blame]7 help
Masahiro Yamadac2726992016-12-07 22:10:26 +0900[diff] [blame]8 This selects MultiMediaCard, Secure Digital and Secure
9 Digital I/O support.
10
11 If you want MMC/SD/SDIO support, you should say Y here and
12 also to your specific host controller driver.
Maxime Ripard7a777f62015-10-15 22:04:05 +0200[diff] [blame]13
Jean-Jacques Hiblotd6400c32018-01-04 15:23:32 +0100[diff] [blame]14config MMC_WRITE
15 bool "support for MMC/SD write operations"
16 depends on MMC
17 default y
18 help
19 Enable write access to MMC and SD Cards
20
Jaehoon Chungcaee38a2021-02-16 10:16:52 +0900[diff] [blame]21config MMC_PWRSEQ
22 bool "HW reset support for eMMC"
23 depends on PWRSEQ
24 help
25 Ths select Hardware reset support aka pwrseq-emmc for eMMC
26 devices.
27
Jun Nie2f516e42018-01-02 12:25:57 +0800[diff] [blame]28config MMC_BROKEN_CD
29 bool "Poll for broken card detection case"
30 help
31 If card detection feature is broken, just poll to detect.
32
Simon Glasse7ecf7c2015-06-23 15:38:48 -0600[diff] [blame]33config DM_MMC
34 bool "Enable MMC controllers using Driver Model"
35 depends on DM
36 help
Robert P. J. Day62a3b7d2016-07-15 13:44:45 -0400[diff] [blame]37 This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glasse7ecf7c2015-06-23 15:38:48 -0600[diff] [blame]38 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
39 and non-removable (e.g. eMMC chip) devices are supported. These
40 appear as block devices in U-Boot and can support filesystems such
41 as EXT4 and FAT.
42
Simon Glassc4d660d2017-07-04 13:31:19 -0600[diff] [blame]43config SPL_DM_MMC
44 bool "Enable MMC controllers using Driver Model in SPL"
45 depends on SPL_DM && DM_MMC
46 default y
47 help
48 This enables the MultiMediaCard (MMC) uclass which supports MMC and
49 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
50 and non-removable (e.g. eMMC chip) devices are supported. These
51 appear as block devices in U-Boot and can support filesystems such
52 as EXT4 and FAT.
53
Masahiro Yamadae298c462016-12-07 22:10:27 +0900[diff] [blame]54if MMC
55
Michael Walle4d6a7732020-09-23 12:42:51 +0200[diff] [blame]56config MMC_SDHCI_ADMA_HELPERS
57 bool
58
Bhargav Shah05e35d42019-07-08 04:10:48 +0000[diff] [blame]59config MMC_SPI
60 bool "Support for SPI-based MMC controller"
61 depends on DM_MMC && DM_SPI
62 help
63 This selects SPI-based MMC controllers.
64 If you have an MMC controller on a SPI bus, say Y here.
65
66 If unsure, say N.
67
68config MMC_SPI_CRC_ON
69 bool "Support CRC for SPI-based MMC controller"
70 depends on MMC_SPI
71 default y
72 help
73 This enables CRC for SPI-based MMC controllers.
74
75 If unsure, say N.
76
Patrice Chotard3c0dbed2017-10-23 10:57:31 +0200[diff] [blame]77config ARM_PL180_MMCI
78 bool "ARM AMBA Multimedia Card Interface and compatible support"
Patrice Chotard3c0dbed2017-10-23 10:57:31 +0200[diff] [blame]79 help
80 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
81 Interface (PL180, PL181 and compatible) support.
82 If you have an ARM(R) platform with a Multimedia Card slot,
83 say Y or M here.
84
Kishon Vijay Abraham I83dc4222017-09-21 16:30:10 +0200[diff] [blame]85config MMC_QUIRKS
86 bool "Enable quirks"
87 default y
88 help
89 Some cards and hosts may sometimes behave unexpectedly (quirks).
90 This option enable workarounds to handle those quirks. Some of them
Joel Johnson26632b72020-01-11 09:08:15 -0700[diff] [blame]91 are enabled by default, other may require additional flags or are
Kishon Vijay Abraham I83dc4222017-09-21 16:30:10 +0200[diff] [blame]92 enabled by the host driver.
93
Jean-Jacques Hiblotcf177892017-11-30 17:44:02 +0100[diff] [blame]94config MMC_HW_PARTITIONING
95 bool "Support for HW partitioning command(eMMC)"
96 default y
97 help
98 This adds a command and an API to do hardware partitioning on eMMC
99 devices.
100
Alex Kiernan5a7b11e2018-05-08 04:43:31 +0000[diff] [blame]101config SUPPORT_EMMC_RPMB
102 bool "Support eMMC replay protected memory block (RPMB)"
103 imply CMD_MMC_RPMB
104 help
105 Enable support for reading, writing and programming the
106 key for the Replay Protection Memory Block partition in eMMC.
107
Alex Kiernan623de3f2019-05-01 07:58:27 +0000[diff] [blame]108config SUPPORT_EMMC_BOOT
109 bool "Support some additional features of the eMMC boot partitions"
110 help
111 Enable support for eMMC boot partitions. This also enables
112 extensions within the mmc command.
113
Jean-Jacques Hiblotf99c2ef2017-11-30 17:44:01 +0100[diff] [blame]114config MMC_IO_VOLTAGE
115 bool "Support IO voltage configuration"
116 help
117 IO voltage configuration allows selecting the voltage level of the IO
118 lines (not the level of main supply). This is required for UHS
119 support. For eMMC this not mandatory, but not enabling this option may
120 prevent the driver of using the faster modes.
121
122config SPL_MMC_IO_VOLTAGE
123 bool "Support IO voltage configuration in SPL"
124 default n
125 help
126 IO voltage configuration allows selecting the voltage level of the IO
127 lines (not the level of main supply). This is required for UHS
128 support. For eMMC this not mandatory, but not enabling this option may
129 prevent the driver of using the faster modes.
130
131config MMC_UHS_SUPPORT
132 bool "enable UHS support"
133 depends on MMC_IO_VOLTAGE
134 help
135 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
136 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
137 frequency can go up to 208MHz (SDR104)
138
139config SPL_MMC_UHS_SUPPORT
140 bool "enable UHS support in SPL"
141 depends on SPL_MMC_IO_VOLTAGE
142 help
143 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
144 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
145 frequency can go up to 208MHz (SDR104)
146
Peng Fan44acd492019-07-10 14:43:07 +0800[diff] [blame]147config MMC_HS400_ES_SUPPORT
148 bool "enable HS400 Enhanced Strobe support"
149 help
150 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
151 frequency is up to 200MHz. This mode does not tune the IO.
152
153config SPL_MMC_HS400_ES_SUPPORT
154 bool "enable HS400 Enhanced Strobe support in SPL"
155 help
156 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
157 frequency is up to 200MHz. This mode does not tune the IO.
158
Peng Fan3dd26262018-08-10 14:07:54 +0800[diff] [blame]159config MMC_HS400_SUPPORT
160 bool "enable HS400 support"
161 select MMC_HS200_SUPPORT
162 help
163 The HS400 mode is support by some eMMC. The bus frequency is up to
164 200MHz. This mode requires tuning the IO.
165
166config SPL_MMC_HS400_SUPPORT
167 bool "enable HS400 support in SPL"
Faiz Abbas68b3e8b2019-08-01 16:33:36 +0530[diff] [blame]168 select SPL_MMC_HS200_SUPPORT
Peng Fan3dd26262018-08-10 14:07:54 +0800[diff] [blame]169 help
170 The HS400 mode is support by some eMMC. The bus frequency is up to
171 200MHz. This mode requires tuning the IO.
172
Jean-Jacques Hiblotf99c2ef2017-11-30 17:44:01 +0100[diff] [blame]173config MMC_HS200_SUPPORT
174 bool "enable HS200 support"
175 help
176 The HS200 mode is support by some eMMC. The bus frequency is up to
177 200MHz. This mode requires tuning the IO.
178
Jean-Jacques Hiblotf99c2ef2017-11-30 17:44:01 +0100[diff] [blame]179config SPL_MMC_HS200_SUPPORT
180 bool "enable HS200 support in SPL"
181 help
182 The HS200 mode is support by some eMMC. The bus frequency is up to
183 200MHz. This mode requires tuning the IO.
184
Jean-Jacques Hiblot35f9e192017-09-21 16:29:53 +0200[diff] [blame]185config MMC_VERBOSE
186 bool "Output more information about the MMC"
187 default y
188 help
189 Enable the output of more information about the card such as the
190 operating mode.
191
Jaehoon Chung72b5a032018-01-26 19:25:31 +0900[diff] [blame]192config MMC_TRACE
193 bool "MMC debugging"
194 default n
195 help
196 This is an option for use by developer. Enable MMC core debugging.
197
198 If you need to see the MMC core message, say Y.
199
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900[diff] [blame]200config MMC_DAVINCI
201 bool "TI DAVINCI Multimedia Card Interface support"
202 depends on ARCH_DAVINCI
203 default y
204 help
205 This selects the TI DAVINCI Multimedia card Interface.
206 If you have an DAVINCI board with a Multimedia Card slot,
207 say Y here. If unsure, say N.
208
Masahiro Yamada55ed3b42017-01-10 13:32:04 +0900[diff] [blame]209config MMC_DW
210 bool "Synopsys DesignWare Memory Card Interface"
Philipp Tomsich2acc24f2018-11-30 22:13:25 +0100[diff] [blame]211 select BOUNCE_BUFFER
Masahiro Yamada55ed3b42017-01-10 13:32:04 +0900[diff] [blame]212 help
213 This selects support for the Synopsys DesignWare Mobile Storage IP
214 block, this provides host support for SD and MMC interfaces, in both
215 PIO, internal DMA mode and external DMA mode.
216
Arthur Lid55e4e72020-02-20 18:19:35 -0800[diff] [blame]217config MMC_DW_CORTINA
218 bool "Cortina specific extensions for Synopsys DW Memory Card Interface"
219 depends on DM_MMC
220 depends on MMC_DW
221 depends on BLK
222 default n
223 help
224 This selects support for Cortina SoC specific extensions to the
225 Synopsys DesignWare Memory Card Interface driver. Select this option
226 for platforms based on Cortina CAxxxx Soc's.
227
Masahiro Yamadaae4c81e2017-01-10 13:32:05 +0900[diff] [blame]228config MMC_DW_EXYNOS
229 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
230 depends on ARCH_EXYNOS
231 depends on MMC_DW
232 default y
233 help
234 This selects support for Samsung Exynos SoC specific extensions to the
235 Synopsys DesignWare Memory Card Interface driver. Select this option
236 for platforms based on Exynos4 and Exynos5 SoC's.
237
238config MMC_DW_K3
239 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
240 depends on MMC_DW
241 help
242 This selects support for Hisilicon K3 SoC specific extensions to the
243 Synopsys DesignWare Memory Card Interface driver. Select this option
244 for platforms based on Hisilicon K3 SoC's.
245
Masahiro Yamadafed44082017-01-10 13:32:03 +0900[diff] [blame]246config MMC_DW_ROCKCHIP
Simon Glassa8cb4fb2015-08-30 16:55:37 -0600[diff] [blame]247 bool "Rockchip SD/MMC controller support"
248 depends on DM_MMC && OF_CONTROL
Masahiro Yamada55ed3b42017-01-10 13:32:04 +0900[diff] [blame]249 depends on MMC_DW
Simon Glassa8cb4fb2015-08-30 16:55:37 -0600[diff] [blame]250 help
251 This enables support for the Rockchip SD/MMM controller, which is
252 based on Designware IP. The device is compatible with at least
253 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
254 as removeable SD and micro-SD cards.
255
Masahiro Yamadaae4c81e2017-01-10 13:32:05 +0900[diff] [blame]256config MMC_DW_SOCFPGA
257 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
258 depends on ARCH_SOCFPGA
259 depends on MMC_DW
260 default y
261 help
262 This selects support for Altera SOCFPGA specific extensions to the
263 Synopsys DesignWare Memory Card Interface driver. Select this option
264 for platforms based on Altera SOCFPGA.
265
Eugeniy Paltsev15736e22019-02-25 18:35:28 +0300[diff] [blame]266config MMC_DW_SNPS
267 bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards"
268 depends on MMC_DW
269 depends on DM_MMC
270 depends on OF_CONTROL
271 depends on CLK
272 help
273 This selects support for Synopsys DesignWare Memory Card Interface driver
274 extensions used in various Synopsys ARC devboards.
275
Stefan Bosch84083182020-07-10 19:07:29 +0200[diff] [blame]276config NEXELL_DWMMC
277 bool "Nexell SD/MMC controller support"
278 depends on ARCH_NEXELL
279 depends on MMC_DW
280 depends on DM_MMC
281 depends on PINCTRL_NEXELL
282 default y
283
Carlo Caione93738622017-04-12 20:30:42 +0200[diff] [blame]284config MMC_MESON_GX
285 bool "Meson GX EMMC controller support"
Simon Glasse7881d82017-07-29 11:35:31 -0600[diff] [blame]286 depends on DM_MMC && BLK && ARCH_MESON
Carlo Caione93738622017-04-12 20:30:42 +0200[diff] [blame]287 help
288 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
289
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900[diff] [blame]290config MMC_MXC
291 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
292 help
293 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
294 Multimedia Card Interface. If you have an i.MX or MPC512x platform
295 with a Multimedia Card slot, say Y here.
296
297 If unsure, say N.
298
299config MMC_MXS
300 bool "Freescale MXS Multimedia Card Interface support"
Adam Ford99bec1a2018-02-06 08:34:45 -0600[diff] [blame]301 depends on MX23 || MX28 || MX6 || MX7
Philipp Tomsich2acc24f2018-11-30 22:13:25 +0100[diff] [blame]302 select BOUNCE_BUFFER
Adam Ford99bec1a2018-02-06 08:34:45 -0600[diff] [blame]303 select APBH_DMA
304 select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
305 select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900[diff] [blame]306 help
307 This selects the Freescale SSP MMC controller found on MXS based
308 platforms like mx23/28.
309
310 If unsure, say N.
311
Felipe Balbib706b1c2017-02-20 14:24:13 +0300[diff] [blame]312config MMC_PCI
313 bool "Support for MMC controllers on PCI"
Bin Meng511dcc32021-02-15 20:01:44 +0800[diff] [blame]314 depends on MMC_SDHCI
Felipe Balbib706b1c2017-02-20 14:24:13 +0300[diff] [blame]315 help
316 This selects PCI-based MMC controllers.
317 If you have an MMC controller on a PCI bus, say Y here.
318
Suneel Garapati70859892019-10-19 18:03:01 -0700[diff] [blame]319config MMC_OCTEONTX
320 bool "Marvell OcteonTX Multimedia Card Interface support"
321 depends on (ARCH_OCTEONTX || ARCH_OCTEONTX2)
322 depends on DM_MMC
323 help
324 This selects the OcteonTX Multimedia card Interface.
325 If you have an OcteonTX/TX2 board with a Multimedia Card slot,
326 say Y here.
327
Felipe Balbib706b1c2017-02-20 14:24:13 +0300[diff] [blame]328 If unsure, say N.
329
Harm Berntsenc689ae02021-03-30 10:19:41 +0200[diff] [blame]330config MVEBU_MMC
331 bool "Kirkwood MMC controller support"
332 depends on DM_MMC && BLK && ARCH_KIRKWOOD
333 help
334 Support for MMC host controller on Kirkwood SoCs.
335 If you are on a Kirkwood architecture, say Y here.
336
337 If unsure, say N.
338
Marcel Ziswiler9b515a82019-05-20 02:44:58 +0200[diff] [blame]339config PXA_MMC_GENERIC
340 bool "Support for MMC controllers on PXA"
341 help
342 This selects MMC controllers on PXA.
343 If you are on a PXA architecture, say Y here.
344
345 If unsure, say N.
346
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900[diff] [blame]347config MMC_OMAP_HS
348 bool "TI OMAP High Speed Multimedia Card Interface support"
Simon Glasse7881d82017-07-29 11:35:31 -0600[diff] [blame]349 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Jean-Jacques Hiblot8ff77632017-09-21 17:03:10 +0200[diff] [blame]350 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900[diff] [blame]351 help
352 This selects the TI OMAP High Speed Multimedia card Interface.
353 If you have an omap2plus board with a Multimedia Card slot,
354 say Y here.
355
356 If unsure, say N.
357
Jean-Jacques Hiblot27a4b3b2018-02-23 10:40:18 +0100[diff] [blame]358config MMC_OMAP_HS_ADMA
359 bool "ADMA support for OMAP HS MMC"
360 depends on MMC_OMAP_HS && !OMAP34XX
361 default y if !AM33XX
362 help
363 This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
364 controller). If supported by the hardware, selecting this option will
365 increase performances.
366
Adam Ford6aca17c2017-02-06 11:31:43 -0600[diff] [blame]367config MMC_OMAP36XX_PINS
368 bool "Enable MMC1 on OMAP36xx/37xx"
369 depends on OMAP34XX && MMC_OMAP_HS
370 help
371 This enables extended-drain in the MMC/SD/SDIO1I/O and
372 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
373 specific to the OMAP36xx/37xx using MMC1
374
375 If you have a controller with this interface, say Y here.
376
377 If unsure, say N.
378
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +0900[diff] [blame]379config SH_SDHI
380 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
Marek Vasut0f531182017-05-13 15:51:14 +0200[diff] [blame]381 depends on ARCH_RMOBILE
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +0900[diff] [blame]382 help
383 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
384
Marek Vasutf3dca4a2018-04-21 17:40:20 +0200[diff] [blame]385config SH_MMCIF
386 bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
387 depends on ARCH_RMOBILE || SH
388 help
389 Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
390
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900[diff] [blame]391config MMC_UNIPHIER
Marek Vasut7dfddc02017-09-23 13:30:30 +0200[diff] [blame]392 bool "UniPhier SD/MMC Host Controller support"
393 depends on ARCH_UNIPHIER
Simon Glasse7881d82017-07-29 11:35:31 -0600[diff] [blame]394 depends on BLK && DM_MMC
Masahiro Yamada9c720c82016-12-30 23:20:14 +0900[diff] [blame]395 depends on OF_CONTROL
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900[diff] [blame]396 help
Marek Vasutb24633d2017-07-21 23:24:36 +0200[diff] [blame]397 This selects support for the Matsushita SD/MMC Host Controller on
Marek Vasut7dfddc02017-09-23 13:30:30 +0200[diff] [blame]398 SocioNext UniPhier SoCs.
399
400config RENESAS_SDHI
401 bool "Renesas R-Car SD/MMC Host Controller support"
402 depends on ARCH_RMOBILE
403 depends on BLK && DM_MMC
404 depends on OF_CONTROL
Marek Vasutd2661d82020-04-04 12:45:04 +0200[diff] [blame]405 select BOUNCE_BUFFER
Marek Vasut7dfddc02017-09-23 13:30:30 +0200[diff] [blame]406 help
407 This selects support for the Matsushita SD/MMC Host Controller on
408 Renesas R-Car SoCs.
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900[diff] [blame]409
Alexander Grafc8a73a22018-01-23 18:05:22 +0100[diff] [blame]410config MMC_BCM2835
411 bool "BCM2835 family custom SD/MMC Host Controller support"
412 depends on ARCH_BCM283X
413 depends on BLK && DM_MMC
414 depends on OF_CONTROL
415 default y
416 help
417 This selects support for the custom SD host controller in the BCM2835
418 family of devices.
419
420 If you have a BCM2835 platform with SD or MMC devices, say Y here.
421
422 If unsure, say N.
423
Paul Burtond7727132018-12-16 19:25:20 -0300[diff] [blame]424config JZ47XX_MMC
425 bool "Ingenic JZ47xx SD/MMC Host Controller support"
426 depends on ARCH_JZ47XX
427 help
428 This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
429
Masahiro Yamadaa5995a52017-01-30 19:46:50 +0900[diff] [blame]430config MMC_SANDBOX
Simon Glassf376a3c2016-05-01 13:52:42 -0600[diff] [blame]431 bool "Sandbox MMC support"
Masahiro Yamadaa5995a52017-01-30 19:46:50 +0900[diff] [blame]432 depends on SANDBOX
Simon Glasse7881d82017-07-29 11:35:31 -0600[diff] [blame]433 depends on BLK && DM_MMC && OF_CONTROL
Simon Glassf376a3c2016-05-01 13:52:42 -0600[diff] [blame]434 help
435 This select a dummy sandbox MMC driver. At present this does nothing
436 other than allow sandbox to be build with MMC support. This
437 improves build coverage for sandbox and makes it easier to detect
438 MMC build errors with sandbox.
439
Masahiro Yamadae1ce61f2016-12-07 22:10:28 +0900[diff] [blame]440config MMC_SDHCI
441 bool "Secure Digital Host Controller Interface support"
442 help
443 This selects the generic Secure Digital Host Controller Interface.
444 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
445 and Toshiba(R). Most controllers found in laptops are of this type.
446
447 If you have a controller with this interface, say Y here.
448
449 If unsure, say N.
450
Masahiro Yamada3d3a74c2016-12-07 22:10:30 +0900[diff] [blame]451config MMC_SDHCI_IO_ACCESSORS
452 bool
453 depends on MMC_SDHCI
454 help
455 This is silent Kconfig symbol that is selected by the drivers that
456 need to overwrite SDHCI IO memory accessors.
457
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900[diff] [blame]458config MMC_SDHCI_SDMA
459 bool "Support SDHCI SDMA"
460 depends on MMC_SDHCI
461 help
462 This enables support for the SDMA (Single Operation DMA) defined
463 in the SD Host Controller Standard Specification Version 1.00 .
464
Faiz Abbas37cb6262019-04-16 23:06:58 +0530[diff] [blame]465config MMC_SDHCI_ADMA
466 bool "Support SDHCI ADMA2"
467 depends on MMC_SDHCI
Michael Walle4d6a7732020-09-23 12:42:51 +0200[diff] [blame]468 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas37cb6262019-04-16 23:06:58 +0530[diff] [blame]469 help
470 This enables support for the ADMA (Advanced DMA) defined
471 in the SD Host Controller Standard Specification Version 3.00
472
473config SPL_MMC_SDHCI_ADMA
474 bool "Support SDHCI ADMA2 in SPL"
475 depends on MMC_SDHCI
Michael Walle4d6a7732020-09-23 12:42:51 +0200[diff] [blame]476 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas37cb6262019-04-16 23:06:58 +0530[diff] [blame]477 help
478 This enables support for the ADMA (Advanced DMA) defined
479 in the SD Host Controller Standard Specification Version 3.00 in SPL.
480
Eddie James7764ee22019-08-27 09:48:03 -0500[diff] [blame]481config MMC_SDHCI_ASPEED
482 bool "Aspeed SDHCI controller"
483 depends on ARCH_ASPEED
484 depends on DM_MMC
485 depends on MMC_SDHCI
486 help
487 Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
488 SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
489 specifications. On the AST2600, the device is also compatible with
490 MMC 5.1 and eMMC 3.0.
491
Masahiro Yamadadd3b64e2017-01-30 19:46:55 +0900[diff] [blame]492config MMC_SDHCI_ATMEL
493 bool "Atmel SDHCI controller support"
494 depends on ARCH_AT91
Simon Glasse7881d82017-07-29 11:35:31 -0600[diff] [blame]495 depends on DM_MMC && BLK && ARCH_AT91
Masahiro Yamadadd3b64e2017-01-30 19:46:55 +0900[diff] [blame]496 depends on MMC_SDHCI
497 help
498 This enables support for the Atmel SDHCI controller, which supports
499 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
500 Memory Card Specification V3.0, and the SDIO V3.0 specification.
501 It is compliant with the SD Host Controller Standard V3.0
502 specification.
503
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900[diff] [blame]504config MMC_SDHCI_BCM2835
505 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
506 depends on ARCH_BCM283X
507 depends on MMC_SDHCI
Masahiro Yamada3d3a74c2016-12-07 22:10:30 +0900[diff] [blame]508 select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900[diff] [blame]509 help
510 This selects the BCM2835 SD/MMC controller.
511
512 If you have a BCM2835 platform with SD or MMC devices,
513 say Y here.
514
515 If unsure, say N.
516
Thomas Fitzsimmons894c3ad2018-06-08 17:59:45 -0400[diff] [blame]517config MMC_SDHCI_BCMSTB
518 tristate "SDHCI support for the BCMSTB SD/MMC Controller"
519 depends on MMC_SDHCI
520 help
521 This selects the Broadcom set-top box SD/MMC controller.
522
523 If you have a BCMSTB platform with SD or MMC devices,
524 say Y here.
525
526 If unsure, say N.
527
Masahiro Yamadae5e7a7c2016-12-30 22:41:46 +0900[diff] [blame]528config MMC_SDHCI_CADENCE
529 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
Simon Glasse7881d82017-07-29 11:35:31 -0600[diff] [blame]530 depends on BLK && DM_MMC
Masahiro Yamadae5e7a7c2016-12-30 22:41:46 +0900[diff] [blame]531 depends on MMC_SDHCI
532 depends on OF_CONTROL
533 help
534 This selects the Cadence SD/SDIO/eMMC driver.
535
536 If you have a controller with this interface, say Y here.
537
538 If unsure, say N.
539
Faiz Abbas3a1a0df2019-06-11 00:43:31 +0530[diff] [blame]540config MMC_SDHCI_AM654
541 bool "SDHCI Controller on TI's Am654 devices"
Lokesh Vutlaaaa449f2018-08-27 15:57:54 +0530[diff] [blame]542 depends on ARCH_K3
543 depends on MMC_SDHCI
544 depends on DM_MMC && OF_CONTROL && BLK
Faiz Abbasce142ff2019-06-11 00:43:38 +0530[diff] [blame]545 depends on REGMAP
Faiz Abbas27a87c82021-02-04 15:10:54 +0530[diff] [blame]546 select MMC_SDHCI_IO_ACCESSORS
Lokesh Vutlaaaa449f2018-08-27 15:57:54 +0530[diff] [blame]547 help
Faiz Abbas3a1a0df2019-06-11 00:43:31 +0530[diff] [blame]548 Support for Secure Digital Host Controller Interface (SDHCI)
549 controllers present on TI's AM654 SOCs.
Lokesh Vutlaaaa449f2018-08-27 15:57:54 +0530[diff] [blame]550
Arun Parameswaran36645f42019-09-12 11:06:08 -0700[diff] [blame]551config MMC_SDHCI_IPROC
552 bool "SDHCI support for the iProc SD/MMC Controller"
553 depends on MMC_SDHCI
554 help
555 This selects the iProc SD/MMC controller.
556
557 If you have a Broadcom IPROC platform with SD or MMC devices,
558 say Y or M here.
559
560 If unsure, say N.
561
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900[diff] [blame]562config MMC_SDHCI_KONA
563 bool "SDHCI support on Broadcom KONA platform"
564 depends on MMC_SDHCI
565 help
566 This selects the Broadcom Kona Secure Digital Host Controller
567 Interface(SDHCI) support.
568 This is used in Broadcom mobile SoCs.
569
570 If you have a controller with this interface, say Y here.
571
Masahiro Yamada360c67d2017-01-30 19:46:53 +0900[diff] [blame]572config MMC_SDHCI_MSM
573 bool "Qualcomm SDHCI controller"
Simon Glasse7881d82017-07-29 11:35:31 -0600[diff] [blame]574 depends on BLK && DM_MMC
Masahiro Yamada360c67d2017-01-30 19:46:53 +0900[diff] [blame]575 depends on MMC_SDHCI
576 help
577 Enables support for SDHCI 2.0 controller present on some Qualcomm
578 Snapdragon devices. This device is compatible with eMMC v4.5 and
579 SD 3.0 specifications. Both SD and eMMC devices are supported.
580 Card-detect gpios are not supported.
581
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900[diff] [blame]582config MMC_SDHCI_MV
583 bool "SDHCI support on Marvell platform"
584 depends on ARCH_MVEBU
585 depends on MMC_SDHCI
586 help
587 This selects the Secure Digital Host Controller Interface on
588 Marvell platform.
589
590 If you have a controller with this interface, say Y here.
591
592 If unsure, say N.
593
Masahiro Yamada1b858772017-01-30 19:46:54 +0900[diff] [blame]594config MMC_SDHCI_PIC32
595 bool "Microchip PIC32 on-chip SDHCI support"
596 depends on DM_MMC && MACH_PIC32
597 depends on MMC_SDHCI
598 help
599 Support for Microchip PIC32 SDHCI controller.
600
Masahiro Yamadafacc8052017-01-30 19:46:52 +0900[diff] [blame]601config MMC_SDHCI_ROCKCHIP
602 bool "Arasan SDHCI controller for Rockchip support"
603 depends on ARCH_ROCKCHIP
Simon Glasse7881d82017-07-29 11:35:31 -0600[diff] [blame]604 depends on DM_MMC && BLK
Masahiro Yamadafacc8052017-01-30 19:46:52 +0900[diff] [blame]605 depends on MMC_SDHCI
606 help
607 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
608
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900[diff] [blame]609config MMC_SDHCI_S5P
610 bool "SDHCI support on Samsung S5P SoC"
611 depends on MMC_SDHCI
612 help
613 This selects the Secure Digital Host Controller Interface (SDHCI)
614 on Samsung S5P SoCs.
615
616 If you have a controller with this interface, say Y here.
617
618 If unsure, say N.
619
620config MMC_SDHCI_SPEAR
621 bool "SDHCI support on ST SPEAr platform"
622 depends on MMC_SDHCI
623 help
624 This selects the Secure Digital Host Controller Interface (SDHCI)
625 often referrered to as the HSMMC block in some of the ST SPEAR range
626 of SoC
627
628 If you have a controller with this interface, say Y here.
629
630 If unsure, say N.
631
Patrice Chotardeee20f82017-02-21 13:37:09 +0100[diff] [blame]632config MMC_SDHCI_STI
633 bool "SDHCI support for STMicroelectronics SoC"
Patrice Chotard51cb23d2017-02-21 13:37:11 +0100[diff] [blame]634 depends on MMC_SDHCI && OF_CONTROL
Patrice Chotardeee20f82017-02-21 13:37:09 +0100[diff] [blame]635 help
636 This selects the Secure Digital Host Controller Interface (SDHCI)
637 on STMicroelectronics STiH410 SoC.
638
Stefan Roeseb6acb5f2016-12-09 15:03:28 +0100[diff] [blame]639config MMC_SDHCI_XENON
640 bool "SDHCI support for the Xenon SDHCI controller"
641 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
642 help
643 Support for Xenon SDHCI host controller on Marvell Armada 3700
644 7k/8k ARM SoCs platforms
645
646 If you have a controller with this interface, say Y here.
647
648 If unsure, say N.
649
Felipe Balbi83b32482017-02-20 14:24:14 +0300[diff] [blame]650config MMC_SDHCI_TANGIER
651 bool "Tangier SDHCI controller support"
652 depends on DM_MMC && BLK
653 depends on MMC_SDHCI
654 help
655 This selects support for SDHCI controller on Tanginer
656 SoC. Note that this controller does not sit on PCI bus and,
657 hence, cannot be enumerated by standard PCI means.
658
659 If you're using an Intel Tangier SoC (available on Intel
660 Edison board), say Y here.
661
662 If unsure, say N.
663
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900[diff] [blame]664config MMC_SDHCI_TEGRA
665 bool "SDHCI platform support for the Tegra SD/MMC Controller"
Trevor Woerner18138ab2020-05-06 08:02:41 -0400[diff] [blame]666 depends on ARCH_TEGRA
Philipp Tomsich2acc24f2018-11-30 22:13:25 +0100[diff] [blame]667 select BOUNCE_BUFFER
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900[diff] [blame]668 default y
669 help
670 This selects the Tegra SD/MMC controller. If you have a Tegra
671 platform with SD or MMC devices, say Y here.
672
673 If unsure, say N.
674
Trent Piephob78d97e2019-04-01 23:05:49 +0000[diff] [blame]675config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
676 bool "Disable external clock loopback"
677 depends on MMC_SDHCI_TEGRA && TEGRA124
678 help
679 Disable the external clock loopback and use the internal one on SDMMC3
680 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
681 being set to 0xfffd according to the TRM.
682
683 TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
684 approach once proper kernel integration made it mainline.
685
Masahiro Yamada08aa0332017-01-30 19:46:51 +0900[diff] [blame]686config MMC_SDHCI_ZYNQ
687 bool "Arasan SDHCI controller support"
Simon Glasse7881d82017-07-29 11:35:31 -0600[diff] [blame]688 depends on DM_MMC && OF_CONTROL && BLK
Masahiro Yamada08aa0332017-01-30 19:46:51 +0900[diff] [blame]689 depends on MMC_SDHCI
690 help
691 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
692
Vipul Kumar5dc5a532018-02-28 15:53:28 +0530[diff] [blame]693config ZYNQ_SDHCI_MAX_FREQ
694 int "Set the maximum frequency of the controller"
695 depends on MMC_SDHCI_ZYNQ
696 help
697 Set the maximum frequency of the controller.
698
Vipul Kumar3ccc2072018-02-28 15:53:29 +0530[diff] [blame]699config ZYNQ_SDHCI_MIN_FREQ
700 int "Set the minimum frequency of the controller"
701 depends on MMC_SDHCI_ZYNQ
702 default 0
703 help
704 Set the minimum frequency of the controller.
705
Siva Durga Prasad Paladugud882f082019-05-27 14:33:14 +0530[diff] [blame]706config ZYNQ_HISPD_BROKEN
707 bool "High speed broken for Zynq SDHCI controller"
708 depends on MMC_SDHCI_ZYNQ
709 help
710 Set if high speed mode is broken.
711
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900[diff] [blame]712config MMC_SUNXI
713 bool "Allwinner sunxi SD/MMC Host Controller support"
Masahiro Yamada0ad178c2017-01-12 12:16:15 +0900[diff] [blame]714 depends on ARCH_SUNXI && !UART0_PORT_F
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900[diff] [blame]715 default y
716 help
717 This selects support for the SD/MMC Host Controller on
718 Allwinner sunxi SoCs.
719
Maxime Ripardde9b1772017-08-23 12:03:41 +0200[diff] [blame]720config MMC_SUNXI_HAS_NEW_MODE
721 bool
722 depends on MMC_SUNXI
723
Vasily Khoruzhick2a8882e2018-11-09 20:41:44 -0800[diff] [blame]724config MMC_SUNXI_HAS_MODE_SWITCH
725 bool
726 depends on MMC_SUNXI
727
Wenyou Yangc86c0152017-04-13 10:29:22 +0800[diff] [blame]728config GENERIC_ATMEL_MCI
729 bool "Atmel Multimedia Card Interface support"
Simon Glasse7881d82017-07-29 11:35:31 -0600[diff] [blame]730 depends on DM_MMC && BLK && ARCH_AT91
Wenyou Yangc86c0152017-04-13 10:29:22 +0800[diff] [blame]731 help
732 This enables support for Atmel High Speed Multimedia Card Interface
733 (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
734 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
735 and CE-ATA V1.1.
736
Patrice Chotardb312c592017-09-04 17:56:22 +0200[diff] [blame]737config STM32_SDMMC2
738 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
Patrice Chotard53c656a2017-10-03 15:54:58 +0200[diff] [blame]739 depends on DM_MMC && BLK && OF_CONTROL
Patrice Chotardb312c592017-09-04 17:56:22 +0200[diff] [blame]740 help
741 This selects support for the SD/MMC controller on STM32H7 SoCs.
742 If you have a board based on such a SoC and with a SD/MMC slot,
743 say Y or M here.
744
Rick Chen9f678ab2017-11-14 14:47:09 +0800[diff] [blame]745config FTSDC010
746 bool "Ftsdc010 SD/MMC controller Support"
747 help
748 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
749
Rick Chen095c9f32018-03-20 15:10:49 +0800[diff] [blame]750config FTSDC010_SDIO
751 bool "Support ftsdc010 sdio"
752 default n
753 depends on FTSDC010
754 help
755 This can enable ftsdc010 sdio function.
756
Weijie Gaod24b6932018-11-15 10:08:04 +0800[diff] [blame]757config MMC_MTK
758 bool "MediaTek SD/MMC Card Interface support"
Weijie Gao3c92a952019-09-25 17:45:37 +0800[diff] [blame]759 depends on ARCH_MEDIATEK || ARCH_MTMIPS
Weijie Gaod24b6932018-11-15 10:08:04 +0800[diff] [blame]760 depends on BLK && DM_MMC
761 depends on OF_CONTROL
762 help
763 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
764 If you have a machine with a integrated SD/MMC card reader, say Y or M here.
765 This is needed if support for any SD/SDIO/MMC devices is required.
766 If unsure, say N.
767
Masahiro Yamadae298c462016-12-07 22:10:27 +0900[diff] [blame]768endif
769
Mario Six07dea2e2018-03-28 14:38:19 +0200[diff] [blame]770config FSL_ESDHC
771 bool "Freescale/NXP eSDHC controller support"
772 help
Yangbo Lufa33d202019-06-21 11:42:27 +0800[diff] [blame]773 This selects support for the eSDHC (Enhanced Secure Digital Host
774 Controller) found on numerous Freescale/NXP SoCs.
775
Michael Walle361a4222020-10-12 10:07:14 +0200[diff] [blame]776config FSL_ESDHC_SUPPORT_ADMA2
777 bool "enable ADMA2 support"
778 depends on FSL_ESDHC
779 select MMC_SDHCI_ADMA_HELPERS
780 help
781 This enables support for the ADMA2 transfer mode. If supported by the
782 eSDHC it will allow 64bit DMA addresses.
783
Yangbo Luc927d652020-05-19 11:06:44 +0800[diff] [blame]784config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
785 bool "enable eSDHC workaround for 3.3v IO reliability issue"
786 depends on FSL_ESDHC && DM_MMC
787 default n
788 help
789 When eSDHC operates at 3.3v, damage can accumulate in an internal
790 level shifter at a higher than expected rate. The faster the interface
791 runs, the more damage accumulates. This issue now is found on LX2160A
792 eSDHC1 for only SD card. The hardware workaround is recommended to use
793 an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card
794 side. For boards without hardware workaround, this option could be
795 enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card.
796 This option assumes no hotplug, and u-boot has to make all the way to
797 to linux to use 1.8v UHS-I speed mode if has card.
798
Yangbo Lufa33d202019-06-21 11:42:27 +0800[diff] [blame]799config FSL_ESDHC_IMX
800 bool "Freescale/NXP i.MX eSDHC controller support"
801 help
802 This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
803 Controller) found on numerous Freescale/NXP SoCs.
Mario Six07dea2e2018-03-28 14:38:19 +0200[diff] [blame]804
Adam Ford3f70bef2019-08-14 07:23:43 -0500[diff] [blame]805config FSL_USDHC
806 bool "Freescale/NXP i.MX uSDHC controller support"
Giulio Benetti6a63a872020-01-10 15:51:46 +0100[diff] [blame]807 depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMXRT || TARGET_S32V234EVB
Adam Ford3f70bef2019-08-14 07:23:43 -0500[diff] [blame]808 select FSL_ESDHC_IMX
809 help
810 This enables the Ultra Secured Digital Host Controller enhancements
811
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +0900[diff] [blame]812endmenu
York Sunc01e4a12016-12-28 08:43:42 -0800[diff] [blame]813
814config SYS_FSL_ERRATUM_ESDHC111
815 bool
816
817config SYS_FSL_ERRATUM_ESDHC13
818 bool
819
820config SYS_FSL_ERRATUM_ESDHC135
821 bool
822
823config SYS_FSL_ERRATUM_ESDHC_A001
824 bool
Michael Wallebd7b8502021-03-17 15:01:36 +0100[diff] [blame]825
826config SYS_FSL_ERRATUM_A011334
827 bool
Michael Walled3b745f2021-03-17 15:01:37 +0100[diff] [blame]828
829config SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
830 bool