blob: 05e0b10f34e395248018a3965085c1fa4738f064 [file] [log] [blame]
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +09001menu "MMC Host controller Support"
2
Maxime Ripard7a777f62015-10-15 22:04:05 +02003config MMC
Masahiro Yamadac2726992016-12-07 22:10:26 +09004 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
Maxime Ripard7a777f62015-10-15 22:04:05 +02006 help
Masahiro Yamadac2726992016-12-07 22:10:26 +09007 This selects MultiMediaCard, Secure Digital and Secure
8 Digital I/O support.
9
10 If you want MMC/SD/SDIO support, you should say Y here and
11 also to your specific host controller driver.
Maxime Ripard7a777f62015-10-15 22:04:05 +020012
Masahiro Yamada54925322017-01-30 19:46:49 +090013config GENERIC_MMC
14 bool "Generic MMC driver framework"
15 default MMC
16
Simon Glasse7ecf7c2015-06-23 15:38:48 -060017config DM_MMC
18 bool "Enable MMC controllers using Driver Model"
19 depends on DM
20 help
Robert P. J. Day62a3b7d2016-07-15 13:44:45 -040021 This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glasse7ecf7c2015-06-23 15:38:48 -060022 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
23 and non-removable (e.g. eMMC chip) devices are supported. These
24 appear as block devices in U-Boot and can support filesystems such
25 as EXT4 and FAT.
26
Simon Glass8ca51e52016-06-12 23:30:22 -060027config DM_MMC_OPS
28 bool "Support MMC controller operations using Driver Model"
29 depends on DM_MMC
Simon Glass252788b2016-10-01 14:43:19 -060030 default y if DM_MMC
Simon Glass8ca51e52016-06-12 23:30:22 -060031 help
32 Driver model provides a means of supporting device operations. This
33 option moves MMC operations under the control of driver model. The
34 option will be removed as soon as all DM_MMC drivers use it, as it
35 will the only supported behaviour.
36
Masahiro Yamadae298c462016-12-07 22:10:27 +090037if MMC
38
Marek Vasutb5b838f2016-12-01 02:06:33 +010039config SPL_MMC_TINY
40 bool "Tiny MMC framework in SPL"
41 help
42 Enable MMC framework tinification support. This option is useful if
43 if your SPL is extremely size constrained. Heed the warning, enable
44 this option if and only if you know exactly what you are doing, if
45 you are reading this help text, you most likely have no idea :-)
46
47 The MMC framework is reduced to bare minimum to be useful. No malloc
48 support is needed for the MMC framework operation with this option
49 enabled. The framework supports exactly one MMC device and exactly
50 one MMC driver. The MMC driver can be adjusted to avoid any malloc
51 operations too, which can remove the need for malloc support in SPL
52 and thus further reduce footprint.
53
Masahiro Yamada1d2c0502017-01-10 13:32:07 +090054config MMC_DAVINCI
55 bool "TI DAVINCI Multimedia Card Interface support"
56 depends on ARCH_DAVINCI
57 default y
58 help
59 This selects the TI DAVINCI Multimedia card Interface.
60 If you have an DAVINCI board with a Multimedia Card slot,
61 say Y here. If unsure, say N.
62
Masahiro Yamada55ed3b42017-01-10 13:32:04 +090063config MMC_DW
64 bool "Synopsys DesignWare Memory Card Interface"
65 help
66 This selects support for the Synopsys DesignWare Mobile Storage IP
67 block, this provides host support for SD and MMC interfaces, in both
68 PIO, internal DMA mode and external DMA mode.
69
Masahiro Yamadaae4c81e2017-01-10 13:32:05 +090070config MMC_DW_EXYNOS
71 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
72 depends on ARCH_EXYNOS
73 depends on MMC_DW
74 default y
75 help
76 This selects support for Samsung Exynos SoC specific extensions to the
77 Synopsys DesignWare Memory Card Interface driver. Select this option
78 for platforms based on Exynos4 and Exynos5 SoC's.
79
80config MMC_DW_K3
81 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
82 depends on MMC_DW
83 help
84 This selects support for Hisilicon K3 SoC specific extensions to the
85 Synopsys DesignWare Memory Card Interface driver. Select this option
86 for platforms based on Hisilicon K3 SoC's.
87
Masahiro Yamadafed44082017-01-10 13:32:03 +090088config MMC_DW_ROCKCHIP
Simon Glassa8cb4fb2015-08-30 16:55:37 -060089 bool "Rockchip SD/MMC controller support"
90 depends on DM_MMC && OF_CONTROL
Masahiro Yamada55ed3b42017-01-10 13:32:04 +090091 depends on MMC_DW
Simon Glassa8cb4fb2015-08-30 16:55:37 -060092 help
93 This enables support for the Rockchip SD/MMM controller, which is
94 based on Designware IP. The device is compatible with at least
95 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
96 as removeable SD and micro-SD cards.
97
Masahiro Yamadaae4c81e2017-01-10 13:32:05 +090098config MMC_DW_SOCFPGA
99 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
100 depends on ARCH_SOCFPGA
101 depends on MMC_DW
102 default y
103 help
104 This selects support for Altera SOCFPGA specific extensions to the
105 Synopsys DesignWare Memory Card Interface driver. Select this option
106 for platforms based on Altera SOCFPGA.
107
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900108config MMC_MXC
109 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
110 help
111 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
112 Multimedia Card Interface. If you have an i.MX or MPC512x platform
113 with a Multimedia Card slot, say Y here.
114
115 If unsure, say N.
116
117config MMC_MXS
118 bool "Freescale MXS Multimedia Card Interface support"
119 help
120 This selects the Freescale SSP MMC controller found on MXS based
121 platforms like mx23/28.
122
123 If unsure, say N.
124
Felipe Balbib706b1c2017-02-20 14:24:13 +0300125config MMC_PCI
126 bool "Support for MMC controllers on PCI"
127 help
128 This selects PCI-based MMC controllers.
129 If you have an MMC controller on a PCI bus, say Y here.
130
131 If unsure, say N.
132
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900133config MMC_OMAP_HS
134 bool "TI OMAP High Speed Multimedia Card Interface support"
135 help
136 This selects the TI OMAP High Speed Multimedia card Interface.
137 If you have an omap2plus board with a Multimedia Card slot,
138 say Y here.
139
140 If unsure, say N.
141
Adam Ford6aca17c2017-02-06 11:31:43 -0600142config MMC_OMAP36XX_PINS
143 bool "Enable MMC1 on OMAP36xx/37xx"
144 depends on OMAP34XX && MMC_OMAP_HS
145 help
146 This enables extended-drain in the MMC/SD/SDIO1I/O and
147 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
148 specific to the OMAP36xx/37xx using MMC1
149
150 If you have a controller with this interface, say Y here.
151
152 If unsure, say N.
153
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +0900154config SH_SDHI
155 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
156 depends on RMOBILE
157 help
158 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
159
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900160config MMC_UNIPHIER
161 bool "UniPhier SD/MMC Host Controller support"
162 depends on ARCH_UNIPHIER
Masahiro Yamada9c720c82016-12-30 23:20:14 +0900163 depends on BLK && DM_MMC_OPS
164 depends on OF_CONTROL
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900165 help
166 This selects support for the SD/MMC Host Controller on UniPhier SoCs.
167
Masahiro Yamadaa5995a52017-01-30 19:46:50 +0900168config MMC_SANDBOX
Simon Glassf376a3c2016-05-01 13:52:42 -0600169 bool "Sandbox MMC support"
Masahiro Yamadaa5995a52017-01-30 19:46:50 +0900170 depends on SANDBOX
171 depends on BLK && DM_MMC_OPS && OF_CONTROL
Simon Glassf376a3c2016-05-01 13:52:42 -0600172 help
173 This select a dummy sandbox MMC driver. At present this does nothing
174 other than allow sandbox to be build with MMC support. This
175 improves build coverage for sandbox and makes it easier to detect
176 MMC build errors with sandbox.
177
Masahiro Yamadae1ce61f2016-12-07 22:10:28 +0900178config MMC_SDHCI
179 bool "Secure Digital Host Controller Interface support"
180 help
181 This selects the generic Secure Digital Host Controller Interface.
182 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
183 and Toshiba(R). Most controllers found in laptops are of this type.
184
185 If you have a controller with this interface, say Y here.
186
187 If unsure, say N.
188
Masahiro Yamada3d3a74c2016-12-07 22:10:30 +0900189config MMC_SDHCI_IO_ACCESSORS
190 bool
191 depends on MMC_SDHCI
192 help
193 This is silent Kconfig symbol that is selected by the drivers that
194 need to overwrite SDHCI IO memory accessors.
195
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900196config MMC_SDHCI_SDMA
197 bool "Support SDHCI SDMA"
198 depends on MMC_SDHCI
199 help
200 This enables support for the SDMA (Single Operation DMA) defined
201 in the SD Host Controller Standard Specification Version 1.00 .
202
Masahiro Yamadadd3b64e2017-01-30 19:46:55 +0900203config MMC_SDHCI_ATMEL
204 bool "Atmel SDHCI controller support"
205 depends on ARCH_AT91
206 depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
207 depends on MMC_SDHCI
208 help
209 This enables support for the Atmel SDHCI controller, which supports
210 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
211 Memory Card Specification V3.0, and the SDIO V3.0 specification.
212 It is compliant with the SD Host Controller Standard V3.0
213 specification.
214
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900215config MMC_SDHCI_BCM2835
216 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
217 depends on ARCH_BCM283X
218 depends on MMC_SDHCI
Masahiro Yamada3d3a74c2016-12-07 22:10:30 +0900219 select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900220 help
221 This selects the BCM2835 SD/MMC controller.
222
223 If you have a BCM2835 platform with SD or MMC devices,
224 say Y here.
225
226 If unsure, say N.
227
Masahiro Yamadae5e7a7c2016-12-30 22:41:46 +0900228config MMC_SDHCI_CADENCE
229 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
230 depends on BLK && DM_MMC_OPS
231 depends on MMC_SDHCI
232 depends on OF_CONTROL
233 help
234 This selects the Cadence SD/SDIO/eMMC driver.
235
236 If you have a controller with this interface, say Y here.
237
238 If unsure, say N.
239
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900240config MMC_SDHCI_KONA
241 bool "SDHCI support on Broadcom KONA platform"
242 depends on MMC_SDHCI
243 help
244 This selects the Broadcom Kona Secure Digital Host Controller
245 Interface(SDHCI) support.
246 This is used in Broadcom mobile SoCs.
247
248 If you have a controller with this interface, say Y here.
249
Masahiro Yamada360c67d2017-01-30 19:46:53 +0900250config MMC_SDHCI_MSM
251 bool "Qualcomm SDHCI controller"
252 depends on BLK && DM_MMC_OPS
253 depends on MMC_SDHCI
254 help
255 Enables support for SDHCI 2.0 controller present on some Qualcomm
256 Snapdragon devices. This device is compatible with eMMC v4.5 and
257 SD 3.0 specifications. Both SD and eMMC devices are supported.
258 Card-detect gpios are not supported.
259
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900260config MMC_SDHCI_MV
261 bool "SDHCI support on Marvell platform"
262 depends on ARCH_MVEBU
263 depends on MMC_SDHCI
264 help
265 This selects the Secure Digital Host Controller Interface on
266 Marvell platform.
267
268 If you have a controller with this interface, say Y here.
269
270 If unsure, say N.
271
Masahiro Yamada1b858772017-01-30 19:46:54 +0900272config MMC_SDHCI_PIC32
273 bool "Microchip PIC32 on-chip SDHCI support"
274 depends on DM_MMC && MACH_PIC32
275 depends on MMC_SDHCI
276 help
277 Support for Microchip PIC32 SDHCI controller.
278
Masahiro Yamadafacc8052017-01-30 19:46:52 +0900279config MMC_SDHCI_ROCKCHIP
280 bool "Arasan SDHCI controller for Rockchip support"
281 depends on ARCH_ROCKCHIP
282 depends on DM_MMC && BLK && DM_MMC_OPS
283 depends on MMC_SDHCI
284 help
285 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
286
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900287config MMC_SDHCI_S5P
288 bool "SDHCI support on Samsung S5P SoC"
289 depends on MMC_SDHCI
290 help
291 This selects the Secure Digital Host Controller Interface (SDHCI)
292 on Samsung S5P SoCs.
293
294 If you have a controller with this interface, say Y here.
295
296 If unsure, say N.
297
298config MMC_SDHCI_SPEAR
299 bool "SDHCI support on ST SPEAr platform"
300 depends on MMC_SDHCI
301 help
302 This selects the Secure Digital Host Controller Interface (SDHCI)
303 often referrered to as the HSMMC block in some of the ST SPEAR range
304 of SoC
305
306 If you have a controller with this interface, say Y here.
307
308 If unsure, say N.
309
Patrice Chotardeee20f82017-02-21 13:37:09 +0100310config MMC_SDHCI_STI
311 bool "SDHCI support for STMicroelectronics SoC"
Patrice Chotard51cb23d2017-02-21 13:37:11 +0100312 depends on MMC_SDHCI && OF_CONTROL
Patrice Chotardeee20f82017-02-21 13:37:09 +0100313 help
314 This selects the Secure Digital Host Controller Interface (SDHCI)
315 on STMicroelectronics STiH410 SoC.
316
Stefan Roeseb6acb5f2016-12-09 15:03:28 +0100317config MMC_SDHCI_XENON
318 bool "SDHCI support for the Xenon SDHCI controller"
319 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
320 help
321 Support for Xenon SDHCI host controller on Marvell Armada 3700
322 7k/8k ARM SoCs platforms
323
324 If you have a controller with this interface, say Y here.
325
326 If unsure, say N.
327
Felipe Balbi83b32482017-02-20 14:24:14 +0300328config MMC_SDHCI_TANGIER
329 bool "Tangier SDHCI controller support"
330 depends on DM_MMC && BLK
331 depends on MMC_SDHCI
332 help
333 This selects support for SDHCI controller on Tanginer
334 SoC. Note that this controller does not sit on PCI bus and,
335 hence, cannot be enumerated by standard PCI means.
336
337 If you're using an Intel Tangier SoC (available on Intel
338 Edison board), say Y here.
339
340 If unsure, say N.
341
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900342config MMC_SDHCI_TEGRA
343 bool "SDHCI platform support for the Tegra SD/MMC Controller"
344 depends on TEGRA
345 default y
346 help
347 This selects the Tegra SD/MMC controller. If you have a Tegra
348 platform with SD or MMC devices, say Y here.
349
350 If unsure, say N.
351
Masahiro Yamada08aa0332017-01-30 19:46:51 +0900352config MMC_SDHCI_ZYNQ
353 bool "Arasan SDHCI controller support"
354 depends on ARCH_ZYNQ || ARCH_ZYNQMP
355 depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
356 depends on MMC_SDHCI
357 help
358 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
359
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900360config MMC_SUNXI
361 bool "Allwinner sunxi SD/MMC Host Controller support"
Masahiro Yamada0ad178c2017-01-12 12:16:15 +0900362 depends on ARCH_SUNXI && !UART0_PORT_F
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900363 default y
364 help
365 This selects support for the SD/MMC Host Controller on
366 Allwinner sunxi SoCs.
367
Masahiro Yamadae298c462016-12-07 22:10:27 +0900368endif
369
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +0900370endmenu
York Sunc01e4a12016-12-28 08:43:42 -0800371
372config SYS_FSL_ERRATUM_ESDHC111
373 bool
374
375config SYS_FSL_ERRATUM_ESDHC13
376 bool
377
378config SYS_FSL_ERRATUM_ESDHC135
379 bool
380
381config SYS_FSL_ERRATUM_ESDHC_A001
382 bool