| Marek Vasut | 1995373 | 2020-01-24 18:39:16 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| 2 | /* |
| 3 | * Copyright (C) 2019 Marek Vasut <marex@denx.de> |
| 4 | */ |
| 5 | |
| 6 | #include "stm32mp15xx-dhcom.dtsi" |
| 7 | |
| 8 | / { |
| 9 | model = "STMicroelectronics STM32MP15xx DHCOM Premium Developer Kit (2)"; |
| 10 | compatible = "dh,stm32mp15xx-dhcom-pdk2", "st,stm32mp15x"; |
| 11 | |
| 12 | aliases { |
| 13 | serial0 = &uart4; |
| 14 | ethernet0 = ðernet0; |
| 15 | }; |
| 16 | |
| 17 | chosen { |
| 18 | stdout-path = "serial0:115200n8"; |
| 19 | }; |
| 20 | |
| 21 | ethernet_vio: vioregulator { |
| 22 | compatible = "regulator-fixed"; |
| 23 | regulator-name = "vio"; |
| 24 | regulator-min-microvolt = <3300000>; |
| 25 | regulator-max-microvolt = <3300000>; |
| 26 | gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; |
| 27 | regulator-always-on; |
| 28 | regulator-boot-on; |
| 29 | }; |
| 30 | }; |
| 31 | |
| 32 | ðernet0 { |
| 33 | status = "okay"; |
| 34 | pinctrl-0 = <ðernet0_rmii_pins_a>; |
| 35 | pinctrl-1 = <ðernet0_rmii_pins_sleep_a>; |
| 36 | pinctrl-names = "default", "sleep"; |
| 37 | phy-mode = "rmii"; |
| 38 | max-speed = <100>; |
| 39 | phy-handle = <&phy0>; |
| 40 | st,eth_ref_clk_sel; |
| 41 | phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; |
| 42 | |
| 43 | mdio0 { |
| 44 | #address-cells = <1>; |
| 45 | #size-cells = <0>; |
| 46 | compatible = "snps,dwmac-mdio"; |
| 47 | |
| 48 | phy0: ethernet-phy@1 { |
| 49 | reg = <1>; |
| 50 | }; |
| 51 | }; |
| 52 | }; |
| 53 | |
| 54 | &pinctrl { |
| 55 | ethernet0_rmii_pins_a: rmii-0 { |
| 56 | pins1 { |
| 57 | pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ |
| 58 | <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ |
| 59 | <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ |
| 60 | <STM32_PINMUX('A', 1, AF0)>, /* ETH1_RMII_REF_CLK */ |
| 61 | <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ |
| 62 | <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ |
| 63 | bias-disable; |
| 64 | drive-push-pull; |
| 65 | slew-rate = <2>; |
| 66 | }; |
| 67 | pins2 { |
| 68 | pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ |
| 69 | <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ |
| 70 | <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ |
| 71 | bias-disable; |
| 72 | }; |
| 73 | }; |
| 74 | |
| 75 | ethernet0_rmii_pins_sleep_a: rmii-sleep-0 { |
| 76 | pins1 { |
| 77 | pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ |
| 78 | <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ |
| 79 | <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ |
| 80 | <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ |
| 81 | <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ |
| 82 | <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ |
| 83 | <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ |
| 84 | <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ |
| 85 | <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ |
| 86 | }; |
| 87 | }; |
| 88 | }; |