blob: 62d8862cc755f25e90930b4d71d71d06f2042aea [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Albert ARIBAUD35629362015-10-23 18:06:43 +02002/*
3 * (C) Copyright 2009
4 * Net Insight <www.netinsight.net>
5 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
6 *
7 * Based on sheevaplug.h:
8 * (C) Copyright 2009
9 * Marvell Semiconductor <www.marvell.com>
10 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
Albert ARIBAUD35629362015-10-23 18:06:43 +020011 */
12
13#ifndef _CONFIG_OPENRD_H
14#define _CONFIG_OPENRD_H
15
16/*
Albert ARIBAUD35629362015-10-23 18:06:43 +020017 * High Level Configuration Options (easy to change)
18 */
19#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
20#define CONFIG_KW88F6281 1 /* SOC Name */
Albert ARIBAUD35629362015-10-23 18:06:43 +020021#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
Albert ARIBAUD35629362015-10-23 18:06:43 +020022
23/*
24 * Commands configuration
25 */
Albert ARIBAUD35629362015-10-23 18:06:43 +020026
27/*
28 * mv-common.h should be defined after CMD configs since it used them
29 * to enable certain macros
30 */
31#include "mv-common.h"
32
33/*
34 * Environment variables configurations
35 */
36#ifdef CONFIG_CMD_NAND
Albert ARIBAUD35629362015-10-23 18:06:43 +020037#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
Albert ARIBAUD35629362015-10-23 18:06:43 +020038#endif
39/*
40 * max 4k env size is enough, but in case of nand
41 * it has to be rounded to sector size
42 */
43#define CONFIG_ENV_SIZE 0x20000 /* 128k */
Stefan Roese5039aae2019-04-11 12:33:36 +020044#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
Albert ARIBAUD35629362015-10-23 18:06:43 +020045/*
46 * Environment is right behind U-Boot in flash. Make sure U-Boot
47 * doesn't grow into the environment area.
48 */
49#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
50
51/*
52 * Default environment variables
53 */
54#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
55 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
56 "${x_bootcmd_usb}; bootm 0x6400000;"
57
Tom Rini43ede0b2017-10-22 17:55:07 -040058#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \
59 CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
Albert ARIBAUD35629362015-10-23 18:06:43 +020060 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
61 "x_bootcmd_usb=usb start\0" \
Tom Rini11e40922018-07-27 07:56:59 -040062 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"
Albert ARIBAUD35629362015-10-23 18:06:43 +020063
64/*
65 * Ethernet Driver configuration
66 */
67#ifdef CONFIG_CMD_NET
68# ifdef CONFIG_BOARD_IS_OPENRD_BASE
69# define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
70# else
71# define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
72# endif
73# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
74# define CONFIG_PHY_BASE_ADR 0x0
75# define PHY_NO "88E1121"
76# else
77# define CONFIG_PHY_BASE_ADR 0x8
78# define PHY_NO "88E1116"
79# endif
80#endif /* CONFIG_CMD_NET */
81
82/*
83 * SATA Driver configuration
84 */
85#ifdef CONFIG_MVSATA_IDE
86#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
87#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
88#endif /*CONFIG_MVSATA_IDE*/
89
90#ifdef CONFIG_CMD_MMC
Albert ARIBAUD35629362015-10-23 18:06:43 +020091#define CONFIG_MVEBU_MMC
92#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
93#endif /* CONFIG_CMD_MMC */
94
95#endif /* _CONFIG_OPENRD_BASE_H */