board/bf537-stamp/bf537-stamp.c

/*
 * U-boot - BF537.c
 *
 * Copyright (c) 2005-2007 Analog Devices Inc.
 *
 * (C) Copyright 2000-2004
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 * MA 02110-1301 USA
 */

#include <common.h>
#include <config.h>
#include <command.h>
#include <asm/blackfin.h>
#include <asm/io.h>
#include <net.h>
#include <asm/mach-common/bits/bootrom.h>

/**
 * is_valid_ether_addr - Determine if the given Ethernet address is valid
 * @addr: Pointer to a six-byte array containing the Ethernet address
 *
 * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
 * a multicast address, and is not FF:FF:FF:FF:FF:FF.
 *
 * Return true if the address is valid.
 */
static inline int is_valid_ether_addr(const u8 * addr)
{
	/* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
	 * explicitly check for it here. */
	return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
}

DECLARE_GLOBAL_DATA_PTR;

#define POST_WORD_ADDR 0xFF903FFC

int checkboard(void)
{
	printf("Board: ADI BF537 stamp board\n");
	printf("       Support: http://blackfin.uclinux.org/\n");
	return 0;
}

#if defined(CONFIG_BFIN_IDE)

void cf_outb(unsigned char val, volatile unsigned char *addr)
{
	*(addr) = val;
	SSYNC();
}

unsigned char cf_inb(volatile unsigned char *addr)
{
	volatile unsigned char c;

	c = *(addr);
	SSYNC();

	return c;
}

void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words)
{
	int i;

	for (i = 0; i < words; i++)
		*(sect_buf + i) = *(addr);
	SSYNC();
}

void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
{
	int i;

	for (i = 0; i < words; i++)
		*(addr) = *(sect_buf + i);
	SSYNC();
}
#endif				/* CONFIG_BFIN_IDE */

phys_size_t initdram(int board_type)
{
#ifdef DEBUG
	int brate;
	char *tmp = getenv("baudrate");
	brate = simple_strtoul(tmp, NULL, 16);
	printf("Serial Port initialized with Baud rate = %x\n", brate);
	printf("SDRAM attributes:\n");
	printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
	       "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
	       3, 3, 6, 2, 3);
	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
	printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
#endif
	gd->bd->bi_memstart = CFG_SDRAM_BASE;
	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
	return CFG_MAX_RAM_SIZE;
}

#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
int misc_init_r(void)
{
#if defined(CONFIG_CMD_NET)
	char nid[32];
	unsigned char *pMACaddr = (unsigned char *)0x203F0000;

	/* The 0xFF check here is to make sure we don't use the address
	 * in flash if it's simply been erased (aka all 0xFF values) */
	if (getenv("ethaddr") == NULL && is_valid_ether_addr(pMACaddr)) {
		sprintf(nid, "%02x:%02x:%02x:%02x:%02x:%02x",
			pMACaddr[0], pMACaddr[1],
			pMACaddr[2], pMACaddr[3], pMACaddr[4], pMACaddr[5]);
		setenv("ethaddr", nid);
	}
#endif

#if defined(CONFIG_BFIN_IDE)
#if defined(CONFIG_BFIN_TRUE_IDE)
	/* Enable ATASEL when in True IDE mode */
	printf("Using CF True IDE Mode\n");
	cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_ENA);
	udelay(1000);
#elif defined(CONFIG_BFIN_CF_IDE)
	/* Disable ATASEL when we're in Common Memory Mode */
	printf("Using CF Common Memory Mode\n");
	cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_DIS);
	udelay(1000);
#elif defined(CONFIG_BFIN_HDD_IDE)
	printf("Using HDD IDE Mode\n");
#endif
	ide_init();
#endif				/* CONFIG_BFIN_IDE */
	return 0;
}
#endif				/* CONFIG_MISC_INIT_R */

#if defined(CONFIG_BFIN_MAC)

extern int bfin_EMAC_initialize(bd_t *bis);

int board_eth_init(bd_t *bis)
{
	return bfin_EMAC_initialize(bis);
}
#endif

#ifdef CONFIG_POST
/* Using sw10-PF5 as the hotkey */
int post_hotkeys_pressed(void)
{
	int delay = 3;
	int i;
	unsigned short value;

	*pPORTF_FER &= ~PF5;
	*pPORTFIO_DIR &= ~PF5;
	*pPORTFIO_INEN |= PF5;

	printf("########Press SW10 to enter Memory POST########: %2d ", delay);
	while (delay--) {
		for (i = 0; i < 100; i++) {
			value = *pPORTFIO & PF5;
			if (value != 0) {
				break;
			}
			udelay(10000);
		}
		printf("\b\b\b%2d ", delay);
	}
	printf("\b\b\b 0");
	printf("\n");
	if (value == 0)
		return 0;
	else {
		printf("Hotkey has been pressed, Enter POST . . . . . .\n");
		return 1;
	}
}
#endif

#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
void post_word_store(ulong a)
{
	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
	*save_addr = a;
}

ulong post_word_load(void)
{
	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
	return *save_addr;
}
#endif

#ifdef CONFIG_POST
int uart_post_test(int flags)
{
	return 0;
}

#define BLOCK_SIZE 0x10000
#define VERIFY_ADDR 0x2000000
extern int erase_block_flash(int);
extern int write_data(long lStart, long lCount, uchar * pnData);
int flash_post_test(int flags)
{
	unsigned short *pbuf, *temp;
	int offset, n, i;
	int value = 0;
	int result = 0;
	printf("\n");
	pbuf = (unsigned short *)VERIFY_ADDR;
	temp = pbuf;
	for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
		offset = (n - 7) * BLOCK_SIZE;
		printf("--------Erase   block:%2d..", n);
		erase_block_flash(n);
		printf("OK\r");
		printf("--------Program block:%2d...", n);
		write_data(CFG_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
		printf("OK\r");
		printf("--------Verify  block:%2d...", n);
		for (i = 0; i < BLOCK_SIZE; i += 2) {
			if (*(unsigned short *)(CFG_FLASH_BASE + offset + i) !=
			    *temp++) {
				value = 1;
				result = 1;
			}
		}
		if (value)
			printf("failed\n");
		else
			printf("OK		%3d%%\r",
			       (int)(
				     (n + 1 -
				      FLASH_START_POST_BLOCK) *
				     100 / (FLASH_END_POST_BLOCK -
					    FLASH_START_POST_BLOCK)));

		temp = pbuf;
		value = 0;
	}
	printf("\n");
	if (result)
		return -1;
	else
		return 0;
}

/****************************************************
 * LED1 ---- PF6	LED2 ---- PF7		    *
 * LED3 ---- PF8	LED4 ---- PF9		    *
 * LED5 ---- PF10	LED6 ---- PF11		    *
 ****************************************************/
int led_post_test(int flags)
{
	*pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
	*pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
	*pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
	*pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
	udelay(1000000);
	printf("LED1 on");
	*pPORTFIO |= PF6;
	udelay(1000000);
	printf("\b\b\b\b\b\b\b");
	printf("LED2 on");
	*pPORTFIO |= PF7;
	udelay(1000000);
	printf("\b\b\b\b\b\b\b");
	printf("LED3 on");
	*pPORTFIO |= PF8;
	udelay(1000000);
	printf("\b\b\b\b\b\b\b");
	printf("LED4 on");
	*pPORTFIO |= PF9;
	udelay(1000000);
	printf("\b\b\b\b\b\b\b");
	printf("LED5 on");
	*pPORTFIO |= PF10;
	udelay(1000000);
	printf("\b\b\b\b\b\b\b");
	printf("lED6 on");
	*pPORTFIO |= PF11;
	printf("\b\b\b\b\b\b\b ");
	return 0;
}

/************************************************
 *  SW10 ---- PF5	SW11 ---- PF4		*
 *  SW12 ---- PF3	SW13 ---- PF2		*
 ************************************************/
int button_post_test(int flags)
{
	int i, delay = 5;
	unsigned short value = 0;
	int result = 0;

	*pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
	*pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
	*pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);

	printf("\n--------Press SW10: %2d ", delay);
	while (delay--) {
		for (i = 0; i < 100; i++) {
			value = *pPORTFIO & PF5;
			if (value != 0) {
				break;
			}
			udelay(10000);
		}
		printf("\b\b\b%2d ", delay);
	}
	if (value != 0)
		printf("\b\bOK");
	else {
		result = -1;
		printf("\b\bfailed");
	}

	delay = 5;
	printf("\n--------Press SW11: %2d ", delay);
	while (delay--) {
		for (i = 0; i < 100; i++) {
			value = *pPORTFIO & PF4;
			if (value != 0) {
				break;
			}
			udelay(10000);
		}
		printf("\b\b\b%2d ", delay);
	}
	if (value != 0)
		printf("\b\bOK");
	else {
		result = -1;
		printf("\b\bfailed");
	}

	delay = 5;
	printf("\n--------Press SW12: %2d ", delay);
	while (delay--) {
		for (i = 0; i < 100; i++) {
			value = *pPORTFIO & PF3;
			if (value != 0) {
				break;
			}
			udelay(10000);
		}
		printf("\b\b\b%2d ", delay);
	}
	if (value != 0)
		printf("\b\bOK");
	else {
		result = -1;
		printf("\b\bfailed");
	}

	delay = 5;
	printf("\n--------Press SW13: %2d ", delay);
	while (delay--) {
		for (i = 0; i < 100; i++) {
			value = *pPORTFIO & PF2;
			if (value != 0) {
				break;
			}
			udelay(10000);
		}
		printf("\b\b\b%2d ", delay);
	}
	if (value != 0)
		printf("\b\bOK");
	else {
		result = -1;
		printf("\b\bfailed");
	}
	printf("\n");
	return result;
}
#endif