blob: 9103864fef90a129f3f54a187721f8c7cff86673 [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
Hans de Goede53ab4af2015-04-15 19:03:49 +020019 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun4i-a10.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47
48/ {
49 model = "Hyundai A7HD";
50 compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
51
52 aliases {
53 serial0 = &uart0;
54 };
55
56 chosen {
57 stdout-path = "serial0:115200n8";
58 };
59};
60
61&ehci1 {
62 status = "okay";
63};
64
65&i2c0 {
66 pinctrl-names = "default";
67 pinctrl-0 = <&i2c0_pins_a>;
68 status = "okay";
69
70 axp209: pmic@34 {
71 compatible = "x-powers,axp209";
72 reg = <0x34>;
73 interrupts = <0>;
74
75 interrupt-controller;
76 #interrupt-cells = <1>;
77 };
78};
79
80&mmc0 {
81 pinctrl-names = "default";
82 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
83 vmmc-supply = <&reg_vcc3v3>;
84 bus-width = <4>;
85 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
86 cd-inverted;
87 status = "okay";
88};
89
Hans de Goede860fbdd2016-08-18 20:51:12 +020090&otg_sram {
91 status = "okay";
92};
93
94&pio {
95 usb0_id_detect_pin: usb0_id_detect_pin@0 {
96 allwinner,pins = "PH4";
97 allwinner,function = "gpio_in";
98 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
99 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
100 };
101
102 usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
103 allwinner,pins = "PH5";
104 allwinner,function = "gpio_in";
105 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
106 allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
107 };
108};
109
110&reg_usb0_vbus {
111 status = "okay";
112};
113
Hans de Goede53ab4af2015-04-15 19:03:49 +0200114&reg_usb2_vbus {
115 gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
116 status = "okay";
117};
118
119&uart0 {
120 pinctrl-names = "default";
121 pinctrl-0 = <&uart0_pins_a>;
122 status = "okay";
123};
124
125&usb2_vbus_pin_a {
126 allwinner,pins = "PH6";
127};
128
Hans de Goede860fbdd2016-08-18 20:51:12 +0200129&usb_otg {
130 dr_mode = "otg";
131 status = "okay";
132};
133
Hans de Goede53ab4af2015-04-15 19:03:49 +0200134&usbphy {
Hans de Goede860fbdd2016-08-18 20:51:12 +0200135 pinctrl-names = "default";
136 pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
137 usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
138 usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
139 usb0_vbus-supply = <&reg_usb0_vbus>;
Hans de Goede53ab4af2015-04-15 19:03:49 +0200140 usb2_vbus-supply = <&reg_usb2_vbus>;
141 status = "okay";
142};