blob: 7197aaf7922aa1b76cd52ac83791217739d19cbf [file] [log] [blame]
wdenk652a10c2005-01-09 23:48:14 +00001/*
2 * (C) Copyright 2001
3 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23/*
24 * board/config.h - configuration options, board specific
25 */
26
27#ifndef __CONFIG_H
28#define __CONFIG_H
29
30/*
31 * High Level Configuration Options
32 * (easy to change)
33 */
34
35#define CONFIG_405GP 1 /* This is a PPC405 CPU */
36#define CONFIG_4xx 1 /* ...member of PPC4xx family */
37#define CONFIG_SBC405 1 /* ...on a WR SBC405 board */
38
39#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
40#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
41
42#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
43
44#define CONFIG_BAUDRATE 9600
45
46#define CONFIG_PREBOOT "echo;echo Welcome to U-Boot for the sbc405;echo;echo Type \"? or help\" to get on-line help;echo"
47
48#define CONFIG_RAMBOOT \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010049 "setenv bootargs root=/dev/ram rw nfsroot=${serverip}:${rootpath} " \
50 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
wdenk652a10c2005-01-09 23:48:14 +000051 "bootm ffc00000 ffca0000"
52#define CONFIG_NFSBOOT \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010053 "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
54 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
wdenk652a10c2005-01-09 23:48:14 +000055 "bootm ffc00000"
56
57#undef CONFIG_BOOTARGS
Wolfgang Denkfe126d82005-11-20 21:40:11 +010058#define CONFIG_BOOTCOMMAND "version;echo;tftpboot ${loadaddr} ${loadfile};bootvx" /* autoboot command */
wdenk652a10c2005-01-09 23:48:14 +000059
60
Ben Warren96e21f82008-10-27 23:50:15 -070061#define CONFIG_PPC4xx_EMAC
wdenk652a10c2005-01-09 23:48:14 +000062#define CONFIG_MII 1 /* MII PHY management */
63#define CONFIG_PHY_ADDR 0 /* PHY address */
64#define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */
65
66#define CONFIG_EXTRA_ENV_SETTINGS \
67 "bootargs=emac(0,0)host:/T221ppc/target/config/sbc405/vxWorks.st " \
68 "e=192.168.193.102:ffffffe0 h=192.168.193.100 u=target pw=hello " \
69 "f=0x08 tn=sbc405 o=emac \0" \
70 "env_startaddr=FF000000\0" \
71 "env_endaddr=FF03FFFF\0" \
72 "loadfile=vxWorks.st\0" \
73 "loadaddr=0x01000000\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010074 "net_load=tftpboot ${loadaddr} ${loadfile}\0" \
wdenk652a10c2005-01-09 23:48:14 +000075 "uboot_startaddr=FFFC0000\0" \
76 "uboot_endaddr=FFFFFFFF\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010077 "update=tftp ${loadaddr} u-boot.bin;" \
78 "protect off ${uboot_startaddr} ${uboot_endaddr};" \
79 "era ${uboot_startaddr} ${uboot_endaddr};" \
80 "cp.b ${loadaddr} ${uboot_startaddr} ${filesize};" \
81 "protect on ${uboot_startaddr} ${uboot_endaddr}\0" \
82 "zapenv=protect off ${env_startaddr} ${env_endaddr};" \
83 "era ${env_startaddr} ${env_endaddr};" \
84 "protect on ${env_startaddr} ${env_endaddr}\0"
wdenk652a10c2005-01-09 23:48:14 +000085
86#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
87
Jon Loeligerd3b8c1a2007-07-09 21:57:31 -050088/*
89 * BOOTP options
90 */
91#define CONFIG_BOOTP_SUBNETMASK
92#define CONFIG_BOOTP_GATEWAY
93#define CONFIG_BOOTP_HOSTNAME
94#define CONFIG_BOOTP_BOOTPATH
95#define CONFIG_BOOTP_BOOTFILESIZE
96
wdenk652a10c2005-01-09 23:48:14 +000097
98#define CONFIG_ENV_OVERWRITE
99
wdenk652a10c2005-01-09 23:48:14 +0000100
Jon Loeliger866e3082007-07-04 22:30:58 -0500101/*
102 * Command line configuration.
103 */
104#include <config_cmd_default.h>
105
106#define CONFIG_CMD_BSP
107#define CONFIG_CMD_ELF
108#define CONFIG_CMD_I2C
109#define CONFIG_CMD_IRQ
110#define CONFIG_CMD_MII
111#define CONFIG_CMD_PCI
112#define CONFIG_CMD_PING
113#define CONFIG_CMD_SDRAM
114
wdenk652a10c2005-01-09 23:48:14 +0000115
116#undef CONFIG_WATCHDOG /* watchdog disabled */
117
118#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
119
120#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */
121#define CONFIG_IPADDR 192.168.193.102
122#define CONFIG_NETMASK 255.255.255.224
123#define CONFIG_SERVERIP 192.168.193.119
124#define CONFIG_GATEWAYIP 192.168.193.97
125
126/*
127 * Miscellaneous configurable options
128 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200129#define CONFIG_SYS_LONGHELP /* undef to save memory */
130#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
wdenk652a10c2005-01-09 23:48:14 +0000131
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200132#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
133#ifdef CONFIG_SYS_HUSH_PARSER
134#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
wdenk652a10c2005-01-09 23:48:14 +0000135#endif
136
Jon Loeliger866e3082007-07-04 22:30:58 -0500137#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200138#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenk652a10c2005-01-09 23:48:14 +0000139#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200140#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenk652a10c2005-01-09 23:48:14 +0000141#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200142#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
143#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
144#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenk652a10c2005-01-09 23:48:14 +0000145
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200146#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
147#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
wdenk652a10c2005-01-09 23:48:14 +0000148
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200149#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200150#define CONFIG_SYS_BASE_BAUD 691200
wdenk652a10c2005-01-09 23:48:14 +0000151
152/* The following table includes the supported baudrates */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200153#define CONFIG_SYS_BAUDRATE_TABLE \
wdenk652a10c2005-01-09 23:48:14 +0000154 { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
155 57600, 115200, 230400, 460800, 921600 }
156
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200157#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
158#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */
wdenk652a10c2005-01-09 23:48:14 +0000159
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200160#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenk652a10c2005-01-09 23:48:14 +0000161
162#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
163
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200164#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
wdenk652a10c2005-01-09 23:48:14 +0000165
166#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
167#undef CONFIG_SOFT_I2C /* I2C bit-banged */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200168#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
169#define CONFIG_SYS_I2C_SLAVE 0x7F
wdenk652a10c2005-01-09 23:48:14 +0000170
171/*-----------------------------------------------------------------------
172 * PCI stuff
173 *-----------------------------------------------------------------------
174 */
175#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
176#define PCI_HOST_FORCE 1 /* configure as pci host */
177#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
178
179#define CONFIG_PCI /* include pci support */
180#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
181#define CONFIG_PCI_PNP /* do pci plug-and-play */
182 /* resource configuration */
183
184#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
185
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200186#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
187#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0408 /* PCI Device ID: PMC-405 */
188#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
189#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
190#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
191#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
192#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */
193#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
194#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
wdenk652a10c2005-01-09 23:48:14 +0000195
196/*-----------------------------------------------------------------------
197 * Start addresses for the final memory configuration
198 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200199 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenk652a10c2005-01-09 23:48:14 +0000200 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200201#define CONFIG_SYS_SDRAM_BASE 0x00000000
202#define CONFIG_SYS_MONITOR_BASE 0xFFFC0000
203#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
204#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
wdenk652a10c2005-01-09 23:48:14 +0000205
206/*
207 * For booting Linux, the board info and command line data
208 * have to be in the first 8 MB of memory, since this is
209 * the maximum mapped by the Linux kernel during initialization.
210 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200211#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenk652a10c2005-01-09 23:48:14 +0000212
213/*-----------------------------------------------------------------------
214 * FLASH organization
215 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200216#define CONFIG_SYS_FLASH_BASE 0xFF000000
217#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
218#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
219#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */
220#define CONFIG_SYS_FLASH_INCREMENT 0x01000000
221#undef CONFIG_SYS_FLASH_PROTECTION /* don't use hardware protection */
222#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
223#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
224#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
225#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
wdenk652a10c2005-01-09 23:48:14 +0000226
227/*-----------------------------------------------------------------------
228 * Environment Variable setup
229 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200230#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* starting right at the beginning */
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200231#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200232#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
233#define CONFIG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */
234#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
wdenk652a10c2005-01-09 23:48:14 +0000235
236/*-----------------------------------------------------------------------
wdenk652a10c2005-01-09 23:48:14 +0000237 * External Bus Controller (EBC) Setup
238 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200239#define FLASH0_BA CONFIG_SYS_FLASH_BASE /* FLASH 0 Base Address */
wdenk652a10c2005-01-09 23:48:14 +0000240
241/* Memory Bank 0 (Flash Bank 0) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200242#define CONFIG_SYS_EBC_PB0AP 0x92015480
243#define CONFIG_SYS_EBC_PB0CR FLASH0_BA | 0x9C000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=32bit*/
wdenk652a10c2005-01-09 23:48:14 +0000244
245/*-----------------------------------------------------------------------
246 * Definitions for initial stack pointer and data area (in data cache)
247 */
248
249/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200250#define CONFIG_SYS_TEMP_STACK_OCM 1
wdenk652a10c2005-01-09 23:48:14 +0000251
252/* On Chip Memory location */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200253#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
254#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
wdenk652a10c2005-01-09 23:48:14 +0000255
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200256#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
257#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
258#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
259#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
260#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenk652a10c2005-01-09 23:48:14 +0000261
262/*-----------------------------------------------------------------------
263 * Definitions for Serial Presence Detect EEPROM address
264 * (to get SDRAM settings)
265 */
266#define SPD_EEPROM_ADDRESS 0x50
267#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
268
269/*
270 * Internal Definitions
271 *
272 * Boot Flags
273 */
274#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
275#define BOOTFLAG_WARM 0x02 /* Software reboot */
276
277#endif /* __CONFIG_H */