blob: 0daac5bbd4bf847132608ef34ef2cf2a527ac9b0 [file] [log] [blame]
wdenk983fda82004-10-28 00:09:35 +00001/*
2 * (C) Copyright 2000-2003
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <common.h>
25#include <mpc8220.h>
26
Wolfgang Denkd87080b2006-03-31 18:32:53 +020027DECLARE_GLOBAL_DATA_PTR;
28
wdenk983fda82004-10-28 00:09:35 +000029/*
30 * Breath some life into the CPU...
31 *
32 * Set up the memory map,
33 * initialize a bunch of registers.
34 */
35void cpu_init_f (void)
36{
wdenk983fda82004-10-28 00:09:35 +000037 volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB;
38 volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
39 volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
40
41 /* Pointer is writable since we allocated a register for it */
42 gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
43
44 /* Clear initial global data */
45 memset ((void *) gd, 0, sizeof (gd_t));
46
47 /* Clear all port configuration */
48 portcfg->pcfg0 = 0;
49 portcfg->pcfg1 = 0;
50 portcfg->pcfg2 = 0;
51 portcfg->pcfg3 = 0;
wdenk7680c142005-05-16 15:23:22 +000052 portcfg->pcfg2 = CFG_GP1_PORT2_CONFIG;
53 portcfg->pcfg3 = CFG_PCI_PORT3_CONFIG | CFG_GP2_PORT3_CONFIG;
wdenk983fda82004-10-28 00:09:35 +000054
55 /*
56 * Flexbus Controller: configure chip selects and enable them
57 */
58#if defined (CFG_CS0_BASE)
59 flexbus->csar0 = CFG_CS0_BASE;
wdenk12b43d52005-04-05 21:57:18 +000060
61/* Sorcery-C can hang-up after CTRL reg initialization */
62#if defined (CFG_CS0_CTRL)
wdenk983fda82004-10-28 00:09:35 +000063 flexbus->cscr0 = CFG_CS0_CTRL;
wdenk12b43d52005-04-05 21:57:18 +000064#endif
wdenk983fda82004-10-28 00:09:35 +000065 flexbus->csmr0 = ((CFG_CS0_MASK - 1) & 0xffff0000) | 1;
66 __asm__ volatile ("sync");
67#endif
68#if defined (CFG_CS1_BASE)
69 flexbus->csar1 = CFG_CS1_BASE;
70 flexbus->cscr1 = CFG_CS1_CTRL;
71 flexbus->csmr1 = ((CFG_CS1_MASK - 1) & 0xffff0000) | 1;
72 __asm__ volatile ("sync");
73#endif
74#if defined (CFG_CS2_BASE)
75 flexbus->csar2 = CFG_CS2_BASE;
76 flexbus->cscr2 = CFG_CS2_CTRL;
77 flexbus->csmr2 = ((CFG_CS2_MASK - 1) & 0xffff0000) | 1;
78 portcfg->pcfg3 |= CFG_CS2_PORT3_CONFIG;
79 __asm__ volatile ("sync");
80#endif
81#if defined (CFG_CS3_BASE)
82 flexbus->csar3 = CFG_CS3_BASE;
83 flexbus->cscr3 = CFG_CS3_CTRL;
84 flexbus->csmr3 = ((CFG_CS3_MASK - 1) & 0xffff0000) | 1;
85 portcfg->pcfg3 |= CFG_CS3_PORT3_CONFIG;
86 __asm__ volatile ("sync");
87#endif
88#if defined (CFG_CS4_BASE)
89 flexbus->csar4 = CFG_CS4_BASE;
90 flexbus->cscr4 = CFG_CS4_CTRL;
91 flexbus->csmr4 = ((CFG_CS4_MASK - 1) & 0xffff0000) | 1;
92 portcfg->pcfg3 |= CFG_CS4_PORT3_CONFIG;
93 __asm__ volatile ("sync");
94#endif
95#if defined (CFG_CS5_BASE)
96 flexbus->csar5 = CFG_CS5_BASE;
97 flexbus->cscr5 = CFG_CS5_CTRL;
98 flexbus->csmr5 = ((CFG_CS5_MASK - 1) & 0xffff0000) | 1;
99 portcfg->pcfg3 |= CFG_CS5_PORT3_CONFIG;
100 __asm__ volatile ("sync");
101#endif
102
103 /* This section of the code cannot place in cpu_init_r(),
104 it will cause the system to hang */
105 /* enable timebase */
wdenk983fda82004-10-28 00:09:35 +0000106 xlbarb->addrTenTimeOut = 0x1000;
107 xlbarb->dataTenTimeOut = 0x1000;
108 xlbarb->busActTimeOut = 0x2000;
109
wdenk12b43d52005-04-05 21:57:18 +0000110 xlbarb->config = 0x00002000;
111
wdenk983fda82004-10-28 00:09:35 +0000112 /* Master Priority Enable */
wdenk983fda82004-10-28 00:09:35 +0000113 xlbarb->mastPriority = 0;
wdenk7680c142005-05-16 15:23:22 +0000114 xlbarb->mastPriEn = 0xff;
wdenk983fda82004-10-28 00:09:35 +0000115}
116
117/*
118 * initialize higher level parts of CPU like time base and timers
119 */
120int cpu_init_r (void)
121{
122 /* this may belongs to disable interrupt section */
123 /* mask all interrupts */
124 *(vu_long *) 0xf0000700 = 0xfffffc00;
125 *(vu_long *) 0xf0000714 |= 0x0001ffff;
126 *(vu_long *) 0xf0000710 &= ~0x00000f00;
127
128 /* route critical ints to normal ints */
129 *(vu_long *) 0xf0000710 |= 0x00000001;
130
Jon Loeliger44312832007-07-09 19:06:00 -0500131#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC)
wdenk983fda82004-10-28 00:09:35 +0000132 /* load FEC microcode */
133 loadtask (0, 2);
134#endif
135 return (0);
136}