blob: 096f68be99e2b962a9b9ee86a22a978509477aad [file] [log] [blame]
Mugunthan V Ne5520e12015-09-22 18:45:12 +05301/*
2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra74x.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12
13/ {
14 model = "TI DRA742";
15 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
16
17 memory {
18 device_type = "memory";
19 reg = <0x80000000 0x60000000>; /* 1536 MB */
20 };
21
22 mmc2_3v3: fixedregulator-mmc2 {
23 compatible = "regulator-fixed";
24 regulator-name = "mmc2_3v3";
25 regulator-min-microvolt = <3300000>;
26 regulator-max-microvolt = <3300000>;
27 };
28
29 extcon_usb1: extcon_usb1 {
30 compatible = "linux,extcon-usb-gpio";
31 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
32 };
33
34 extcon_usb2: extcon_usb2 {
35 compatible = "linux,extcon-usb-gpio";
36 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
37 };
38
39 vtt_fixed: fixedregulator-vtt {
40 compatible = "regulator-fixed";
41 regulator-name = "vtt_fixed";
42 regulator-min-microvolt = <1350000>;
43 regulator-max-microvolt = <1350000>;
44 regulator-always-on;
45 regulator-boot-on;
46 enable-active-high;
47 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
48 };
49};
50
51&dra7_pmx_core {
52 pinctrl-names = "default";
53 pinctrl-0 = <&vtt_pin>;
54
55 vtt_pin: pinmux_vtt_pin {
56 pinctrl-single,pins = <
57 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
58 >;
59 };
60
61 i2c1_pins: pinmux_i2c1_pins {
62 pinctrl-single,pins = <
63 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
64 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
65 >;
66 };
67
68 i2c2_pins: pinmux_i2c2_pins {
69 pinctrl-single,pins = <
70 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
71 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
72 >;
73 };
74
75 i2c3_pins: pinmux_i2c3_pins {
76 pinctrl-single,pins = <
77 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
78 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
79 >;
80 };
81
82 mcspi1_pins: pinmux_mcspi1_pins {
83 pinctrl-single,pins = <
84 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
85 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
86 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
87 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
88 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
89 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
90 >;
91 };
92
93 mcspi2_pins: pinmux_mcspi2_pins {
94 pinctrl-single,pins = <
95 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
96 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
97 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
98 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
99 >;
100 };
101
102 uart1_pins: pinmux_uart1_pins {
103 pinctrl-single,pins = <
104 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
105 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
106 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
107 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
108 >;
109 };
110
111 uart2_pins: pinmux_uart2_pins {
112 pinctrl-single,pins = <
113 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
114 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
115 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
116 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
117 >;
118 };
119
120 uart3_pins: pinmux_uart3_pins {
121 pinctrl-single,pins = <
122 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
123 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
124 >;
125 };
126
127 qspi1_pins: pinmux_qspi1_pins {
128 pinctrl-single,pins = <
129 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
130 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
131 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
132 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
133 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
134 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
135 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
136 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
137 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
138 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
139 >;
140 };
141
142 usb1_pins: pinmux_usb1_pins {
143 pinctrl-single,pins = <
144 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
145 >;
146 };
147
148 usb2_pins: pinmux_usb2_pins {
149 pinctrl-single,pins = <
150 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
151 >;
152 };
153
154 nand_flash_x16: nand_flash_x16 {
155 /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
156 * So NAND flash requires following switch settings:
157 * SW5.9 (GPMC_WPN) = LOW
158 * SW5.1 (NAND_BOOTn) = HIGH */
159 pinctrl-single,pins = <
160 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
161 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
162 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
163 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
164 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
165 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
166 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
167 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
168 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
169 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
170 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
171 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
172 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
173 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
174 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
175 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
176 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
177 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
178 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
179 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
180 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
181 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
182 >;
183 };
184
185 cpsw_default: cpsw_default {
186 pinctrl-single,pins = <
187 /* Slave 1 */
188 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
189 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
190 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
191 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
192 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
193 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
194 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
195 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
196 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
197 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
198 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
199 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
200
201 /* Slave 2 */
202 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
203 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
204 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
205 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
206 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
207 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
208 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
209 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
210 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
211 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
212 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
213 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
214 >;
215
216 };
217
218 cpsw_sleep: cpsw_sleep {
219 pinctrl-single,pins = <
220 /* Slave 1 */
221 0x250 (MUX_MODE15)
222 0x254 (MUX_MODE15)
223 0x258 (MUX_MODE15)
224 0x25c (MUX_MODE15)
225 0x260 (MUX_MODE15)
226 0x264 (MUX_MODE15)
227 0x268 (MUX_MODE15)
228 0x26c (MUX_MODE15)
229 0x270 (MUX_MODE15)
230 0x274 (MUX_MODE15)
231 0x278 (MUX_MODE15)
232 0x27c (MUX_MODE15)
233
234 /* Slave 2 */
235 0x198 (MUX_MODE15)
236 0x19c (MUX_MODE15)
237 0x1a0 (MUX_MODE15)
238 0x1a4 (MUX_MODE15)
239 0x1a8 (MUX_MODE15)
240 0x1ac (MUX_MODE15)
241 0x1b0 (MUX_MODE15)
242 0x1b4 (MUX_MODE15)
243 0x1b8 (MUX_MODE15)
244 0x1bc (MUX_MODE15)
245 0x1c0 (MUX_MODE15)
246 0x1c4 (MUX_MODE15)
247 >;
248 };
249
250 davinci_mdio_default: davinci_mdio_default {
251 pinctrl-single,pins = <
252 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
253 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
254 >;
255 };
256
257 davinci_mdio_sleep: davinci_mdio_sleep {
258 pinctrl-single,pins = <
259 0x23c (MUX_MODE15)
260 0x240 (MUX_MODE15)
261 >;
262 };
263
264 dcan1_pins_default: dcan1_pins_default {
265 pinctrl-single,pins = <
266 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
267 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
268 >;
269 };
270
271 dcan1_pins_sleep: dcan1_pins_sleep {
272 pinctrl-single,pins = <
273 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
274 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
275 >;
276 };
277};
278
279&i2c1 {
280 status = "okay";
281 pinctrl-names = "default";
282 pinctrl-0 = <&i2c1_pins>;
283 clock-frequency = <400000>;
284
285 tps659038: tps659038@58 {
286 compatible = "ti,tps659038";
287 reg = <0x58>;
288
289 tps659038_pmic {
290 compatible = "ti,tps659038-pmic";
291
292 regulators {
293 smps123_reg: smps123 {
294 /* VDD_MPU */
295 regulator-name = "smps123";
296 regulator-min-microvolt = < 850000>;
297 regulator-max-microvolt = <1250000>;
298 regulator-always-on;
299 regulator-boot-on;
300 };
301
302 smps45_reg: smps45 {
303 /* VDD_DSPEVE */
304 regulator-name = "smps45";
305 regulator-min-microvolt = < 850000>;
306 regulator-max-microvolt = <1150000>;
307 regulator-always-on;
308 regulator-boot-on;
309 };
310
311 smps6_reg: smps6 {
312 /* VDD_GPU - over VDD_SMPS6 */
313 regulator-name = "smps6";
314 regulator-min-microvolt = <850000>;
315 regulator-max-microvolt = <1250000>;
316 regulator-always-on;
317 regulator-boot-on;
318 };
319
320 smps7_reg: smps7 {
321 /* CORE_VDD */
322 regulator-name = "smps7";
323 regulator-min-microvolt = <850000>;
324 regulator-max-microvolt = <1060000>;
325 regulator-always-on;
326 regulator-boot-on;
327 };
328
329 smps8_reg: smps8 {
330 /* VDD_IVAHD */
331 regulator-name = "smps8";
332 regulator-min-microvolt = < 850000>;
333 regulator-max-microvolt = <1250000>;
334 regulator-always-on;
335 regulator-boot-on;
336 };
337
338 smps9_reg: smps9 {
339 /* VDDS1V8 */
340 regulator-name = "smps9";
341 regulator-min-microvolt = <1800000>;
342 regulator-max-microvolt = <1800000>;
343 regulator-always-on;
344 regulator-boot-on;
345 };
346
347 ldo1_reg: ldo1 {
348 /* LDO1_OUT --> SDIO */
349 regulator-name = "ldo1";
350 regulator-min-microvolt = <1800000>;
351 regulator-max-microvolt = <3300000>;
352 regulator-boot-on;
353 };
354
355 ldo2_reg: ldo2 {
356 /* VDD_RTCIO */
357 /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
358 regulator-name = "ldo2";
359 regulator-min-microvolt = <3300000>;
360 regulator-max-microvolt = <3300000>;
361 regulator-always-on;
362 regulator-boot-on;
363 };
364
365 ldo3_reg: ldo3 {
366 /* VDDA_1V8_PHY */
367 regulator-name = "ldo3";
368 regulator-min-microvolt = <1800000>;
369 regulator-max-microvolt = <1800000>;
370 regulator-always-on;
371 regulator-boot-on;
372 };
373
374 ldo9_reg: ldo9 {
375 /* VDD_RTC */
376 regulator-name = "ldo9";
377 regulator-min-microvolt = <1050000>;
378 regulator-max-microvolt = <1050000>;
379 regulator-always-on;
380 regulator-boot-on;
381 };
382
383 ldoln_reg: ldoln {
384 /* VDDA_1V8_PLL */
385 regulator-name = "ldoln";
386 regulator-min-microvolt = <1800000>;
387 regulator-max-microvolt = <1800000>;
388 regulator-always-on;
389 regulator-boot-on;
390 };
391
392 ldousb_reg: ldousb {
393 /* VDDA_3V_USB: VDDA_USBHS33 */
394 regulator-name = "ldousb";
395 regulator-min-microvolt = <3300000>;
396 regulator-max-microvolt = <3300000>;
397 regulator-boot-on;
398 };
399 };
400 };
401 };
402
403 pcf_gpio_21: gpio@21 {
404 compatible = "ti,pcf8575";
405 reg = <0x21>;
406 lines-initial-states = <0x1408>;
407 gpio-controller;
408 #gpio-cells = <2>;
409 interrupt-parent = <&gpio6>;
410 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
411 interrupt-controller;
412 #interrupt-cells = <2>;
413 };
414
415};
416
417&i2c2 {
418 status = "okay";
419 pinctrl-names = "default";
420 pinctrl-0 = <&i2c2_pins>;
421 clock-frequency = <400000>;
422};
423
424&i2c3 {
425 status = "okay";
426 pinctrl-names = "default";
427 pinctrl-0 = <&i2c3_pins>;
428 clock-frequency = <400000>;
429};
430
431&mcspi1 {
432 status = "okay";
433 pinctrl-names = "default";
434 pinctrl-0 = <&mcspi1_pins>;
435};
436
437&mcspi2 {
438 status = "okay";
439 pinctrl-names = "default";
440 pinctrl-0 = <&mcspi2_pins>;
441};
442
443&uart1 {
444 status = "okay";
445 pinctrl-names = "default";
446 pinctrl-0 = <&uart1_pins>;
447 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
448 <&dra7_pmx_core 0x3e0>;
449};
450
451&uart2 {
452 status = "okay";
453 pinctrl-names = "default";
454 pinctrl-0 = <&uart2_pins>;
455};
456
457&uart3 {
458 status = "okay";
459 pinctrl-names = "default";
460 pinctrl-0 = <&uart3_pins>;
461};
462
463&mmc1 {
464 status = "okay";
465 vmmc-supply = <&ldo1_reg>;
466 bus-width = <4>;
467};
468
469&mmc2 {
470 status = "okay";
471 vmmc-supply = <&mmc2_3v3>;
472 bus-width = <8>;
473};
474
475&cpu0 {
476 cpu0-supply = <&smps123_reg>;
477};
478
479&qspi {
480 status = "okay";
481 pinctrl-names = "default";
482 pinctrl-0 = <&qspi1_pins>;
483
484 spi-max-frequency = <48000000>;
485 m25p80@0 {
486 compatible = "s25fl256s1";
487 spi-max-frequency = <48000000>;
488 reg = <0>;
489 spi-tx-bus-width = <1>;
490 spi-rx-bus-width = <4>;
491 spi-cpol;
492 spi-cpha;
493 #address-cells = <1>;
494 #size-cells = <1>;
495
496 /* MTD partition table.
497 * The ROM checks the first four physical blocks
498 * for a valid file to boot and the flash here is
499 * 64KiB block size.
500 */
501 partition@0 {
502 label = "QSPI.SPL";
503 reg = <0x00000000 0x000010000>;
504 };
505 partition@1 {
506 label = "QSPI.SPL.backup1";
507 reg = <0x00010000 0x00010000>;
508 };
509 partition@2 {
510 label = "QSPI.SPL.backup2";
511 reg = <0x00020000 0x00010000>;
512 };
513 partition@3 {
514 label = "QSPI.SPL.backup3";
515 reg = <0x00030000 0x00010000>;
516 };
517 partition@4 {
518 label = "QSPI.u-boot";
519 reg = <0x00040000 0x00100000>;
520 };
521 partition@5 {
522 label = "QSPI.u-boot-spl-os";
523 reg = <0x00140000 0x00080000>;
524 };
525 partition@6 {
526 label = "QSPI.u-boot-env";
527 reg = <0x001c0000 0x00010000>;
528 };
529 partition@7 {
530 label = "QSPI.u-boot-env.backup1";
531 reg = <0x001d0000 0x0010000>;
532 };
533 partition@8 {
534 label = "QSPI.kernel";
535 reg = <0x001e0000 0x0800000>;
536 };
537 partition@9 {
538 label = "QSPI.file-system";
539 reg = <0x009e0000 0x01620000>;
540 };
541 };
542};
543
544&omap_dwc3_1 {
545 extcon = <&extcon_usb1>;
546};
547
548&omap_dwc3_2 {
549 extcon = <&extcon_usb2>;
550};
551
552&usb1 {
553 dr_mode = "peripheral";
554 pinctrl-names = "default";
555 pinctrl-0 = <&usb1_pins>;
556};
557
558&usb2 {
559 dr_mode = "host";
560 pinctrl-names = "default";
561 pinctrl-0 = <&usb2_pins>;
562};
563
564&elm {
565 status = "okay";
566};
567
568&gpmc {
569 status = "okay";
570 pinctrl-names = "default";
571 pinctrl-0 = <&nand_flash_x16>;
572 ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
573 nand@0,0 {
574 reg = <0 0 4>; /* device IO registers */
575 ti,nand-ecc-opt = "bch8";
576 ti,elm-id = <&elm>;
577 nand-bus-width = <16>;
578 gpmc,device-width = <2>;
579 gpmc,sync-clk-ps = <0>;
580 gpmc,cs-on-ns = <0>;
581 gpmc,cs-rd-off-ns = <80>;
582 gpmc,cs-wr-off-ns = <80>;
583 gpmc,adv-on-ns = <0>;
584 gpmc,adv-rd-off-ns = <60>;
585 gpmc,adv-wr-off-ns = <60>;
586 gpmc,we-on-ns = <10>;
587 gpmc,we-off-ns = <50>;
588 gpmc,oe-on-ns = <4>;
589 gpmc,oe-off-ns = <40>;
590 gpmc,access-ns = <40>;
591 gpmc,wr-access-ns = <80>;
592 gpmc,rd-cycle-ns = <80>;
593 gpmc,wr-cycle-ns = <80>;
594 gpmc,bus-turnaround-ns = <0>;
595 gpmc,cycle2cycle-delay-ns = <0>;
596 gpmc,clk-activation-ns = <0>;
597 gpmc,wait-monitoring-ns = <0>;
598 gpmc,wr-data-mux-bus-ns = <0>;
599 /* MTD partition table */
600 /* All SPL-* partitions are sized to minimal length
601 * which can be independently programmable. For
602 * NAND flash this is equal to size of erase-block */
603 #address-cells = <1>;
604 #size-cells = <1>;
605 partition@0 {
606 label = "NAND.SPL";
607 reg = <0x00000000 0x000020000>;
608 };
609 partition@1 {
610 label = "NAND.SPL.backup1";
611 reg = <0x00020000 0x00020000>;
612 };
613 partition@2 {
614 label = "NAND.SPL.backup2";
615 reg = <0x00040000 0x00020000>;
616 };
617 partition@3 {
618 label = "NAND.SPL.backup3";
619 reg = <0x00060000 0x00020000>;
620 };
621 partition@4 {
622 label = "NAND.u-boot-spl-os";
623 reg = <0x00080000 0x00040000>;
624 };
625 partition@5 {
626 label = "NAND.u-boot";
627 reg = <0x000c0000 0x00100000>;
628 };
629 partition@6 {
630 label = "NAND.u-boot-env";
631 reg = <0x001c0000 0x00020000>;
632 };
633 partition@7 {
634 label = "NAND.u-boot-env.backup1";
635 reg = <0x001e0000 0x00020000>;
636 };
637 partition@8 {
638 label = "NAND.kernel";
639 reg = <0x00200000 0x00800000>;
640 };
641 partition@9 {
642 label = "NAND.file-system";
643 reg = <0x00a00000 0x0f600000>;
644 };
645 };
646};
647
648&usb2_phy1 {
649 phy-supply = <&ldousb_reg>;
650};
651
652&usb2_phy2 {
653 phy-supply = <&ldousb_reg>;
654};
655
656&gpio7 {
657 ti,no-reset-on-init;
658 ti,no-idle-on-init;
659};
660
661&mac {
662 status = "okay";
663 pinctrl-names = "default", "sleep";
664 pinctrl-0 = <&cpsw_default>;
665 pinctrl-1 = <&cpsw_sleep>;
666 dual_emac;
667};
668
669&cpsw_emac0 {
670 phy_id = <&davinci_mdio>, <2>;
671 phy-mode = "rgmii";
672 dual_emac_res_vlan = <1>;
673};
674
675&cpsw_emac1 {
676 phy_id = <&davinci_mdio>, <3>;
677 phy-mode = "rgmii";
678 dual_emac_res_vlan = <2>;
679};
680
681&davinci_mdio {
682 pinctrl-names = "default", "sleep";
683 pinctrl-0 = <&davinci_mdio_default>;
684 pinctrl-1 = <&davinci_mdio_sleep>;
685};
686
687&dcan1 {
688 status = "ok";
689 pinctrl-names = "default", "sleep", "active";
690 pinctrl-0 = <&dcan1_pins_sleep>;
691 pinctrl-1 = <&dcan1_pins_sleep>;
692 pinctrl-2 = <&dcan1_pins_default>;
693};