Anatolij Gustschin | 4387cf1 | 2012-08-31 01:29:57 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2012 |
| 3 | * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> |
| 4 | * |
Wolfgang Denk | 1a45966 | 2013-07-08 09:37:19 +0200 | [diff] [blame] | 5 | * SPDX-License-Identifier: GPL-2.0+ |
Anatolij Gustschin | 4387cf1 | 2012-08-31 01:29:57 +0000 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | /* |
| 9 | * Valid values for CONFIG_SYS_TEXT_BASE are: |
| 10 | * 0xFC000000 boot low boot high (standard configuration) |
| 11 | * 0x00100000 boot from RAM (for testing only) |
| 12 | */ |
| 13 | #ifndef CONFIG_SYS_TEXT_BASE |
| 14 | #define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ |
| 15 | #endif |
| 16 | |
| 17 | /* Board specific flash config */ |
| 18 | #define CONFIG_SYS_FLASH_BASE 0xfc000000 |
| 19 | #define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ |
| 20 | /* max number of sectors on one chip */ |
| 21 | #define CONFIG_SYS_MAX_FLASH_SECT 512 |
| 22 | |
| 23 | /* |
| 24 | * Include common defines for all ifm boards |
| 25 | */ |
| 26 | #include "o2dnt-common.h" |
| 27 | |
| 28 | /* |
| 29 | * GPIO configuration: |
| 30 | * CS1 SDRAM activate + no CAN + no PCI |
| 31 | */ |
| 32 | #define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 |
| 33 | |
| 34 | /* Other board specific configs */ |
| 35 | #define CONFIG_SYS_BOOTCS_CFG 0x00057d01 |
| 36 | #define CONFIG_SYS_RESET_ADDRESS 0xfc000000 |
| 37 | |
| 38 | #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ |
| 39 | #define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ |
| 40 | |
| 41 | /* Use redundant environment */ |
| 42 | #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) |
| 43 | #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) |
| 44 | |
| 45 | #define CONFIG_BOARD_NAME "o2d300" |
| 46 | #define CONFIG_BOARD_BOOTCMD "run dhcp_boot" |
| 47 | #define CONFIG_BOARD_MEM_LIMIT xstr(126) |
| 48 | #define BOARD_POST_CRC32_END xstr(0x02000000) |
| 49 | |
| 50 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 51 | CONFIG_IFM_DEFAULT_ENV_SETTINGS \ |
| 52 | CONFIG_IFM_DEFAULT_ENV_OLD \ |
| 53 | CONFIG_IFM_DEFAULT_ENV_NEW \ |
| 54 | "autoload=no\0" \ |
| 55 | "dhcp_boot=run dhcpcmd;run flash_mtd\0" \ |
| 56 | "flash_mtd=run mtd_args addip addmem;" \ |
| 57 | "bootm ${kernel_addr}\0" \ |
| 58 | "mtd_args=setenv bootargs root=/dev/mtdblock4 " \ |
| 59 | "rw rootfstype=cramfs\0" \ |
| 60 | "linbot=fc080000\0" \ |
| 61 | "lintop=fc17ffff\0" \ |
| 62 | "rambot=fc180000\0" \ |
| 63 | "ramtop=fc57ffff\0" \ |
| 64 | "jffbot=fc580000\0" \ |
| 65 | "jfftop=fd39ffff\0" \ |
| 66 | "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \ |
| 67 | "ubotop=fc03ffff\0" \ |
| 68 | "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0" \ |
| 69 | "halbot=fd3a0000\0" \ |
| 70 | "haltop=fdf9ffff\0" \ |
| 71 | "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};" \ |
| 72 | "cp.b ${fileaddr} ${halbot} ${filesize}\0" \ |
| 73 | "kernel_addr=0xfc060000\0" \ |
| 74 | "ramdisk_addr=0xfc160000\0" \ |
| 75 | "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ |
| 76 | "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \ |
| 77 | "netretry=once\0" \ |
| 78 | "protcmd=protect on ${linbot} ${lintop};" \ |
| 79 | "protect on ${rambot} ${ramtop}\0" \ |
| 80 | "o2derror=def_env\0" \ |
| 81 | "sensorType=O2D300AA\0" |