blob: aa8c5da36d35c4b3102083b1f8f9c916f0e0f622 [file] [log] [blame]
Dieter Kiermaierec164412009-06-29 14:45:08 +02001/*
2 * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
3 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Dieter Kiermaierec164412009-06-29 14:45:08 +02005 */
6
7/*
8 * Based on (mostly copied from) plat-orion based Linux 2.6 kernel driver.
9 * Removed kernel level irq handling. Took some macros from kernel to
10 * allow build.
11 *
12 * Dieter Kiermaier dk-arm-linux@gmx.de
13 */
14
15#ifndef __KIRKWOOD_GPIO_H
16#define __KIRKWOOD_GPIO_H
17
Dieter Kiermaierec164412009-06-29 14:45:08 +020018/* got from kernel include/linux/bitops.h */
19#define BITS_PER_BYTE 8
20#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
21
22#define GPIO_MAX 50
23#define GPIO_OFF(pin) (((pin) >> 5) ? 0x0040 : 0x0000)
Stefan Roesed5c51322014-10-22 12:13:11 +020024#define GPIO_OUT(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x00)
25#define GPIO_IO_CONF(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x04)
26#define GPIO_BLINK_EN(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x08)
27#define GPIO_IN_POL(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x0c)
28#define GPIO_DATA_IN(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x10)
29#define GPIO_EDGE_CAUSE(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x14)
30#define GPIO_EDGE_MASK(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x18)
31#define GPIO_LEVEL_MASK(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x1c)
Dieter Kiermaierec164412009-06-29 14:45:08 +020032
33/*
34 * Kirkwood-specific GPIO API
35 */
Heiko Schocher57215cd2009-07-16 09:58:31 +020036
37void kw_gpio_set_valid(unsigned pin, int mode);
Dieter Kiermaierec164412009-06-29 14:45:08 +020038int kw_gpio_is_valid(unsigned pin, int mode);
39int kw_gpio_direction_input(unsigned pin);
40int kw_gpio_direction_output(unsigned pin, int value);
41int kw_gpio_get_value(unsigned pin);
42void kw_gpio_set_value(unsigned pin, int value);
43void kw_gpio_set_blink(unsigned pin, int blink);
44void kw_gpio_set_unused(unsigned pin);
45
46#define GPIO_INPUT_OK (1 << 0)
47#define GPIO_OUTPUT_OK (1 << 1)
48
49#endif