blob: 6393ff3fedb1fc0c68bcc5ec1561299b725fed83 [file] [log] [blame]
David Purdy1d0f5fa2012-03-27 16:01:09 +00001/*
2 * Copyright (C) 2012
3 * David Purdy <david.c.purdy@gmail.com>
4 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
David Purdy1d0f5fa2012-03-27 16:01:09 +000011 */
12
13#ifndef _CONFIG_POGO_E02_H
14#define _CONFIG_POGO_E02_H
15
16/*
17 * Machine type definition and ID
18 */
19#define MACH_TYPE_POGO_E02 3542
20#define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02
21#define CONFIG_IDENT_STRING "\nPogo E02"
22
23/*
24 * High Level Configuration Options (easy to change)
25 */
26#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
David Purdy1d0f5fa2012-03-27 16:01:09 +000027#define CONFIG_KW88F6281 /* SOC Name */
28#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
29
30/*
31 * Commands configuration
32 */
33#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
34#define CONFIG_SYS_MVFS
David Purdy1d0f5fa2012-03-27 16:01:09 +000035#define CONFIG_CMD_ENV
David Purdy1d0f5fa2012-03-27 16:01:09 +000036#define CONFIG_CMD_NAND
David Purdy1d0f5fa2012-03-27 16:01:09 +000037
38/*
39 * mv-common.h should be defined after CMD configs since it used them
40 * to enable certain macros
41 */
42#include "mv-common.h"
43
David Purdy1d0f5fa2012-03-27 16:01:09 +000044/*
45 * Environment variables configurations
46 */
47#ifdef CONFIG_CMD_NAND
48#define CONFIG_ENV_IS_IN_NAND
49#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
50#else
51#define CONFIG_ENV_IS_NOWHERE
52#endif
53
54#define CONFIG_ENV_SIZE 0x20000 /* 128k */
55#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
56
57/*
58 * Default environment variables
59 */
60#define CONFIG_BOOTCOMMAND \
61 "setenv bootargs $(bootargs_console); " \
62 "run bootcmd_usb; " \
63 "bootm 0x00800000 0x01100000"
64
65#define CONFIG_EXTRA_ENV_SETTINGS \
66 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
67 "32M(rootfs),-(data)\0"\
68 "mtdids=nand0=orion_nand\0"\
69 "bootargs_console=console=ttyS0,115200\0" \
70 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
71 "ext2load usb 0:1 0x01100000 /uInitrd\0"
72
73/*
74 * Ethernet Driver configuration
75 */
76#ifdef CONFIG_CMD_NET
77#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
78#define CONFIG_PHY_BASE_ADR 0
79#endif /* CONFIG_CMD_NET */
80
81/*
82 * File system
83 */
David Purdy1d0f5fa2012-03-27 16:01:09 +000084#define CONFIG_CMD_JFFS2
85#define CONFIG_CMD_UBI
86#define CONFIG_CMD_UBIFS
87#define CONFIG_RBTREE
88#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
89#define CONFIG_MTD_PARTITIONS
90#define CONFIG_CMD_MTDPARTS
91#define CONFIG_LZO
92
93#endif /* _CONFIG_POGO_E02_H */