blob: 4aa855092110f9d0fe9b1918baf3864dfa465f6a [file] [log] [blame]
Felipe Balbi1e4ad742014-11-10 14:02:44 -06001/*
2 * (C) Copyright 2014
3 * Texas Instruments Incorporated.
4 * Felipe Balbi <balbi@ti.com>
5 *
6 * Configuration settings for the TI Beagle x15 board.
7 * See ti_omap5_common.h for omap5 common settings.
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12#ifndef __CONFIG_BEAGLE_X15_H
13#define __CONFIG_BEAGLE_X15_H
14
15#define CONFIG_AM57XX
16
17#define CONFIG_NR_DRAM_BANKS 2
18
19#define CONFIG_ENV_SIZE (64 << 10)
20#define CONFIG_ENV_IS_IN_FAT
21#define FAT_ENV_INTERFACE "mmc"
22#define FAT_ENV_DEVICE_AND_PART "0:1"
23#define FAT_ENV_FILE "uboot.env"
24
25#define CONFIG_CMD_SAVEENV
26
27#define CONSOLEDEV "ttyO2"
28#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
29#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
30#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
31#define CONFIG_BAUDRATE 115200
32
33#define CONFIG_SYS_OMAP_ABE_SYSCK
34
35/* Define the default GPT table for eMMC */
36#define PARTS_DEFAULT \
37 "uuid_disk=${uuid_gpt_disk};" \
38 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
39
40#include <configs/ti_omap5_common.h>
41
42/* Enhance our eMMC support / experience. */
43#define CONFIG_CMD_GPT
44#define CONFIG_EFI_PARTITION
Felipe Balbi1e4ad742014-11-10 14:02:44 -060045
46/* CPSW Ethernet */
Felipe Balbi301ecbb2014-12-10 14:16:15 -060047#define CONFIG_CMD_NFS
Felipe Balbi1e4ad742014-11-10 14:02:44 -060048#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
49#define CONFIG_CMD_DHCP
50#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
51#define CONFIG_BOOTP_DNS2
52#define CONFIG_BOOTP_SEND_HOSTNAME
53#define CONFIG_BOOTP_GATEWAY
54#define CONFIG_BOOTP_SUBNETMASK
55#define CONFIG_NET_RETRY_COUNT 10
56#define CONFIG_CMD_PING
57#define CONFIG_CMD_MII
58#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
59#define CONFIG_MII /* Required in net/eth.c */
60#define CONFIG_PHY_GIGE /* per-board part of CPSW */
61#define CONFIG_PHYLIB
Sekhar Norie7365702015-03-10 16:00:09 +053062#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
Felipe Balbi1e4ad742014-11-10 14:02:44 -060063
64#define CONFIG_SUPPORT_EMMC_BOOT
65
66/* USB xHCI HOST */
67#define CONFIG_CMD_USB
68#define CONFIG_USB_HOST
69#define CONFIG_USB_XHCI
70#define CONFIG_USB_XHCI_OMAP
71#define CONFIG_USB_STORAGE
72#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
73
74#define CONFIG_OMAP_USB_PHY
75#define CONFIG_OMAP_USB3PHY1_HOST
76
77/* SATA */
78#define CONFIG_BOARD_LATE_INIT
79#define CONFIG_CMD_SCSI
80#define CONFIG_LIBATA
81#define CONFIG_SCSI_AHCI
82#define CONFIG_SCSI_AHCI_PLAT
83#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
84#define CONFIG_SYS_SCSI_MAX_LUN 1
85#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
86 CONFIG_SYS_SCSI_MAX_LUN)
87
88#endif /* __CONFIG_BEAGLE_X5_H */