Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / 7393a09800599b1aa90e23288c82e6ca2d8294b4 / . / include / configs / t3corp.h
blob: 0ecc5b10deac2f8cfe5bb3782e34040f26cb14c7 [file] [log] [blame]
Stefan Roese273ed032010-05-19 11:11:15 +0200[diff] [blame]1/*
2 * (C) Copyright 2010
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18 * MA 02111-1307 USA
19 */
20
21/*
22 * t3corp.h - configuration for T3CORP (460GT)
23 */
24#ifndef __CONFIG_H
25#define __CONFIG_H
26
27/*
28 * High Level Configuration Options
29 */
30#define CONFIG_460GT 1 /* Specific PPC460GT */
31#define CONFIG_440 1
32#define CONFIG_4xx 1 /* ... PPC4xx family */
33
34#define CONFIG_HOSTNAME t3corp
35
36/*
37 * Include common defines/options for all AMCC/APM eval boards
38 */
39#include "amcc-common.h"
40
41#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
42
43#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
44#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
45#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
46#define CONFIG_BOARD_TYPES 1 /* support board types */
47#define CONFIG_FIT
48#define CFG_ALT_MEMTEST
49
50/*
51 * Base addresses -- Note these are effective addresses where the
52 * actual resources get mapped (not physical addresses)
53 */
54#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
55#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
56#define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE
57
58#define CONFIG_SYS_PCIE_MEMBASE 0xb0000000 /* mapped PCIe mem */
59#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* incr for PCIe */
60#define CONFIG_SYS_PCIE_BASE 0xc4000000 /* PCIe UTL regs */
61
62#define CONFIG_SYS_PCIE0_CFGBASE 0xc0000000
63#define CONFIG_SYS_PCIE1_CFGBASE 0xc1000000
64#define CONFIG_SYS_PCIE0_XCFGBASE 0xc3000000
65#define CONFIG_SYS_PCIE1_XCFGBASE 0xc3001000
66
67#define CONFIG_SYS_PCIE0_UTLBASE 0xc08010000ULL /* 36bit phys addr */
68
69/* base address of inbound PCIe window */
70#define CONFIG_SYS_PCIE_INBOUND_BASE 0x000000000ULL /* 36bit phys addr */
71
72/* EBC stuff */
73#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* later mapped here */
74#define CONFIG_SYS_FLASH_SIZE (64 << 20)
75
76#define CONFIG_SYS_FPGA1_BASE 0xe0000000
77#define CONFIG_SYS_FPGA2_BASE 0xe0100000
78#define CONFIG_SYS_FPGA3_BASE 0xe0200000
79
80#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */
81#define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4
82#define CONFIG_SYS_FLASH_BASE_PHYS_L 0xCC000000
83#define CONFIG_SYS_FLASH_BASE_PHYS \
84 (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
85 | (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
86
87#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */
88#define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */
89#define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000
90
91#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal periph. */
92
93#define CONFIG_SYS_AHB_BASE 0xE2000000 /* int. AHB periph. */
94
95/*
96 * Initial RAM & stack pointer (placed in OCM)
97 */
98#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */
99#define CONFIG_SYS_INIT_RAM_END (4 << 10)
100#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */
101#define CONFIG_SYS_GBL_DATA_OFFSET \
102 (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
103#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
104
105/*
106 * Serial Port
107 */
108#undef CONFIG_UART1_CONSOLE /* define this if you want console on UART1 */
109
110/*
111 * Environment
112 */
113/*
114 * Define here the location of the environment variables (flash).
115 */
116#define CONFIG_ENV_IS_IN_FLASH /* use flash for environment vars */
117
118/*
119 * Flash related
120 */
121#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
122#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
123#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD reset cmd */
124
125#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
126#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
127#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors p. chip*/
128
129#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms*/
130#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms*/
131
132#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buff'd writes (20x faster)*/
133#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */
134
135#define CONFIG_ENV_SECT_SIZE 0x20000 /* sector size */
136#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - \
137 CONFIG_ENV_SECT_SIZE)
138#define CONFIG_ENV_SIZE 0x4000 /* env sector size */
139
140/* Address and size of Redundant Environment Sector */
141#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
142#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
143
144/*
145 * DDR2 SDRAM
146 */
147#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */
148#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
149#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */
150#undef CONFIG_PPC4xx_DDR_METHOD_A
151
152/* DDR1/2 SDRAM Device Control Register Data Values */
153/* Memory Queue */
154#define CONFIG_SYS_SDRAM_R0BAS (SDRAM_RXBAS_SDBA_ENCODE(0) | \
155 SDRAM_RXBAS_SDSZ_256)
156#define CONFIG_SYS_SDRAM_R1BAS 0x00000000
157#define CONFIG_SYS_SDRAM_R2BAS 0x00000000
158#define CONFIG_SYS_SDRAM_R3BAS 0x00000000
159#define CONFIG_SYS_SDRAM_PLBADDULL 0x00000000
160#define CONFIG_SYS_SDRAM_PLBADDUHB 0x00000008
161#define CONFIG_SYS_SDRAM_CONF1LL 0x80001C00
162#define CONFIG_SYS_SDRAM_CONF1HB 0x80001C80
163#define CONFIG_SYS_SDRAM_CONFPATHB 0x10a68000
164
165#define CONFIG_DDR_ECC
166#define CONFIG_SYS_MBYTES_SDRAM 256
167
168#define CAS_LATENCY JEDEC_MA_MR_CL_DDR2_5_0_CLK
169
170/* DDR1/2 SDRAM Device Control Register Data Values */
171#define CONFIG_SYS_SDRAM0_MB0CF (SDRAM_RXBAS_SDAM_MODE7 | \
172 SDRAM_RXBAS_SDBE_ENABLE)
173#define CONFIG_SYS_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE
174#define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
175#define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
176#define CONFIG_SYS_SDRAM0_MCOPT1 (SDRAM_MCOPT1_MCHK_GEN | \
177 SDRAM_MCOPT1_PMU_OPEN | \
178 SDRAM_MCOPT1_DMWD_32 | \
179 SDRAM_MCOPT1_8_BANKS | \
180 SDRAM_MCOPT1_DDR2_TYPE | \
181 SDRAM_MCOPT1_QDEP | \
182 SDRAM_MCOPT1_RWOO_DISABLED | \
183 SDRAM_MCOPT1_WOOO_DISABLED | \
184 SDRAM_MCOPT1_DREF_NORMAL)
185#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000
186#define CONFIG_SYS_SDRAM0_MODT0 SDRAM_MODT_EB0W_ENABLE
187#define CONFIG_SYS_SDRAM0_MODT1 0x00000000
188#define CONFIG_SYS_SDRAM0_MODT2 0x00000000
189#define CONFIG_SYS_SDRAM0_MODT3 0x00000000
190#define CONFIG_SYS_SDRAM0_CODT (SDRAM_CODT_RK0R_ON | \
191 SDRAM_CODT_DQS_1_8_V_DDR2 | \
192 SDRAM_CODT_IO_NMODE)
193#define CONFIG_SYS_SDRAM0_RTR SDRAM_RTR_RINT_ENCODE(1560)
194#define CONFIG_SYS_SDRAM0_INITPLR0 \
195 (SDRAM_INITPLR_ENABLE | \
196 SDRAM_INITPLR_IMWT_ENCODE(80) | \
197 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
198#define CONFIG_SYS_SDRAM0_INITPLR1 \
199 (SDRAM_INITPLR_ENABLE | \
200 SDRAM_INITPLR_IMWT_ENCODE(3) | \
201 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \
202 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
203 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
204#define CONFIG_SYS_SDRAM0_INITPLR2 \
205 (SDRAM_INITPLR_ENABLE | \
206 SDRAM_INITPLR_IMWT_ENCODE(2) | \
207 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
208 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2) | \
209 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
210#define CONFIG_SYS_SDRAM0_INITPLR3 \
211 (SDRAM_INITPLR_ENABLE | \
212 SDRAM_INITPLR_IMWT_ENCODE(2) | \
213 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
214 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3) | \
215 SDRAM_INITPLR_IMA_ENCODE(0))
216#define CONFIG_SYS_SDRAM0_INITPLR4 \
217 (SDRAM_INITPLR_ENABLE | \
218 SDRAM_INITPLR_IMWT_ENCODE(2) | \
219 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
220 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
221 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_ENABLE | \
222 JEDEC_MA_EMR_RTT_150OHM))
223#define CONFIG_SYS_SDRAM0_INITPLR5 \
224 (SDRAM_INITPLR_ENABLE | \
225 SDRAM_INITPLR_IMWT_ENCODE(200) | \
226 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
227 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
228 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
229 CAS_LATENCY | \
230 JEDEC_MA_MR_BLEN_4 | \
231 JEDEC_MA_MR_DLL_RESET))
232#define CONFIG_SYS_SDRAM0_INITPLR6 \
233 (SDRAM_INITPLR_ENABLE | \
234 SDRAM_INITPLR_IMWT_ENCODE(3) | \
235 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \
236 SDRAM_INITPLR_IBA_ENCODE(0x0) | \
237 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
238#define CONFIG_SYS_SDRAM0_INITPLR7 \
239 (SDRAM_INITPLR_ENABLE | \
240 SDRAM_INITPLR_IMWT_ENCODE(26) | \
241 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
242#define CONFIG_SYS_SDRAM0_INITPLR8 \
243 (SDRAM_INITPLR_ENABLE | \
244 SDRAM_INITPLR_IMWT_ENCODE(26) | \
245 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
246#define CONFIG_SYS_SDRAM0_INITPLR9 \
247 (SDRAM_INITPLR_ENABLE | \
248 SDRAM_INITPLR_IMWT_ENCODE(26) | \
249 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
250#define CONFIG_SYS_SDRAM0_INITPLR10 \
251 (SDRAM_INITPLR_ENABLE | \
252 SDRAM_INITPLR_IMWT_ENCODE(26) | \
253 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
254#define CONFIG_SYS_SDRAM0_INITPLR11 \
255 (SDRAM_INITPLR_ENABLE | \
256 SDRAM_INITPLR_IMWT_ENCODE(2) | \
257 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
258 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
259 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
260 CAS_LATENCY | \
261 JEDEC_MA_MR_BLEN_4))
262#define CONFIG_SYS_SDRAM0_INITPLR12 \
263 (SDRAM_INITPLR_ENABLE | \
264 SDRAM_INITPLR_IMWT_ENCODE(2) | \
265 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
266 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
267 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER | \
268 JEDEC_MA_EMR_RDQS_DISABLE | \
269 JEDEC_MA_EMR_DQS_ENABLE | \
270 JEDEC_MA_EMR_RTT_150OHM | \
271 JEDEC_MA_EMR_ODS_NORMAL))
272#define CONFIG_SYS_SDRAM0_INITPLR13 \
273 (SDRAM_INITPLR_ENABLE | \
274 SDRAM_INITPLR_IMWT_ENCODE(2) | \
275 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
276 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
277 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \
278 JEDEC_MA_EMR_RDQS_DISABLE | \
279 JEDEC_MA_EMR_DQS_ENABLE | \
280 JEDEC_MA_EMR_RTT_150OHM | \
281 JEDEC_MA_EMR_ODS_NORMAL))
282#define CONFIG_SYS_SDRAM0_INITPLR14 SDRAM_INITPLR_DISABLE
283#define CONFIG_SYS_SDRAM0_INITPLR15 SDRAM_INITPLR_DISABLE
284#define CONFIG_SYS_SDRAM0_RQDC (SDRAM_RQDC_RQDE_ENABLE | \
285 SDRAM_RQDC_RQFD_ENCODE(56))
286#define CONFIG_SYS_SDRAM0_RFDC SDRAM_RFDC_RFFD_ENCODE(599)
287#define CONFIG_SYS_SDRAM0_RDCC (SDRAM_RDCC_RDSS_T2)
288#define CONFIG_SYS_SDRAM0_DLCR (SDRAM_DLCR_DCLM_AUTO | \
289 SDRAM_DLCR_DLCS_CONT_DONE | \
290 SDRAM_DLCR_DLCV_ENCODE(155))
291#define CONFIG_SYS_SDRAM0_CLKTR SDRAM_CLKTR_CLKP_90_DEG_ADV
292#define CONFIG_SYS_SDRAM0_WRDTR SDRAM_WRDTR_WTR_90_DEG_ADV
293#define CONFIG_SYS_SDRAM0_SDTR1 (SDRAM_SDTR1_LDOF_2_CLK | \
294 SDRAM_SDTR1_RTW_2_CLK | \
295 SDRAM_SDTR1_RTRO_1_CLK)
296#define CONFIG_SYS_SDRAM0_SDTR2 (SDRAM_SDTR2_RCD_3_CLK | \
297 SDRAM_SDTR2_WTR_2_CLK | \
298 SDRAM_SDTR2_XSNR_32_CLK | \
299 SDRAM_SDTR2_WPC_4_CLK | \
300 SDRAM_SDTR2_RPC_2_CLK | \
301 SDRAM_SDTR2_RP_3_CLK | \
302 SDRAM_SDTR2_RRD_2_CLK)
303#define CONFIG_SYS_SDRAM0_SDTR3 (SDRAM_SDTR3_RAS_ENCODE(8) | \
304 SDRAM_SDTR3_RC_ENCODE(11) | \
305 SDRAM_SDTR3_XCS | \
306 SDRAM_SDTR3_RFC_ENCODE(26))
307#define CONFIG_SYS_SDRAM0_MMODE (SDRAM_MMODE_WR_DDR2_3_CYC | \
308 CAS_LATENCY | \
309 SDRAM_MMODE_BLEN_4)
310#define CONFIG_SYS_SDRAM0_MEMODE (SDRAM_MEMODE_DQS_ENABLE | \
311 SDRAM_MEMODE_RTT_150OHM)
312
313/*
314 * I2C
315 */
316#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */
317
318#define CONFIG_SYS_I2C_MULTI_EEPROMS
319#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
320#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
321#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
322#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
323
324/* I2C bootstrap EEPROM */
325#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52
326#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
327#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
328
329/*
330 * Ethernet
331 */
332#define CONFIG_IBM_EMAC4_V4 1
333
334#define CONFIG_HAS_ETH0
335
336#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
337#define CONFIG_M88E1111_PHY
338/* Disable fiber since fiber/copper auto-selection doesn't seem to work */
339#define CONFIG_M88E1111_DISABLE_FIBER
340
341#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
342#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
343#define CONFIG_PHY_DYNAMIC_ANEG 1
344
345/*
346 * Default environment variables
347 */
348#define CONFIG_EXTRA_ENV_SETTINGS \
349 CONFIG_AMCC_DEF_ENV \
350 CONFIG_AMCC_DEF_ENV_POWERPC \
351 CONFIG_AMCC_DEF_ENV_NOR_UPD \
352 "kernel_addr=fc000000\0" \
353 "fdt_addr=fc1e0000\0" \
354 "ramdisk_addr=fc200000\0" \
355 "pciconfighost=1\0" \
356 "pcie_mode=RP:RP\0" \
357 ""
358
359/*
360 * Commands additional to the ones defined in amcc-common.h
361 */
362#define CONFIG_CMD_CHIP_CONFIG
363#define CONFIG_CMD_PCI
364#define CONFIG_CMD_SDRAM
365
366/*
367 * PCI stuff
368 */
369/* General PCI */
370#define CONFIG_PCI /* include pci support */
371#define CONFIG_PCI_PNP /* do pci plug-and-play */
372#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
373#define CONFIG_PCI_CONFIG_HOST_BRIDGE
374
375/* Board-specific PCI, no PCI support, only PCIe */
376#undef CONFIG_SYS_PCI_TARGET_INIT
377#undef CONFIG_SYS_PCI_MASTER_INIT
378
379#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
380#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
381
382
383/*
384 * External Bus Controller (EBC) Setup
385 */
386
387/*
388 * T3CORP has 64MBytes of NOR flash (Spansion 29GL512), but the
389 * boot EBC mapping only supports a maximum of 16MBytes
390 * (4.ff00.0000 - 4.ffff.ffff).
391 * To solve this problem, the flash has to get remapped to another
392 * EBC address which accepts bigger regions:
393 *
394 * 0xfc00.0000 -> 4.cc00.0000
395 */
396
397/* Memory Bank 0 (NOR-flash) */
398#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \
399 EBC_BXAP_TWT_ENCODE(16) | \
400 EBC_BXAP_BCE_DISABLE | \
401 EBC_BXAP_BCT_2TRANS | \
402 EBC_BXAP_CSN_ENCODE(1) | \
403 EBC_BXAP_OEN_ENCODE(1) | \
404 EBC_BXAP_WBN_ENCODE(1) | \
405 EBC_BXAP_WBF_ENCODE(1) | \
406 EBC_BXAP_TH_ENCODE(7) | \
407 EBC_BXAP_RE_DISABLED | \
408 EBC_BXAP_SOR_DELAYED | \
409 EBC_BXAP_BEM_WRITEONLY | \
410 EBC_BXAP_PEN_DISABLED)
411#define CONFIG_SYS_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_BOOT_BASE_ADDR) | \
412 EBC_BXCR_BS_16MB | \
413 EBC_BXCR_BU_RW | \
414 EBC_BXCR_BW_16BIT)
415
416/* Memory Bank 1 (FPGA 1) */
417#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \
418 EBC_BXAP_TWT_ENCODE(5) | \
419 EBC_BXAP_CSN_ENCODE(0) | \
420 EBC_BXAP_OEN_ENCODE(4) | \
421 EBC_BXAP_WBN_ENCODE(0) | \
422 EBC_BXAP_WBF_ENCODE(0) | \
423 EBC_BXAP_TH_ENCODE(1) | \
424 EBC_BXAP_RE_DISABLED | \
425 EBC_BXAP_SOR_DELAYED | \
426 EBC_BXAP_BEM_RW | \
427 EBC_BXAP_PEN_DISABLED)
428#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \
429 EBC_BXCR_BS_1MB | \
430 EBC_BXCR_BU_RW | \
431 EBC_BXCR_BW_32BIT)
432
433/* Memory Bank 2 (FPGA 2) */
434#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED | \
435 EBC_BXAP_TWT_ENCODE(5) | \
436 EBC_BXAP_CSN_ENCODE(0) | \
437 EBC_BXAP_OEN_ENCODE(4) | \
438 EBC_BXAP_WBN_ENCODE(0) | \
439 EBC_BXAP_WBF_ENCODE(0) | \
440 EBC_BXAP_TH_ENCODE(1) | \
441 EBC_BXAP_RE_DISABLED | \
442 EBC_BXAP_SOR_DELAYED | \
443 EBC_BXAP_BEM_RW | \
444 EBC_BXAP_PEN_DISABLED)
445#define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA2_BASE) | \
446 EBC_BXCR_BS_1MB | \
447 EBC_BXCR_BU_RW | \
448 EBC_BXCR_BW_32BIT)
449
450/* Memory Bank 3 (FPGA 3) */
451#define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_DISABLED | \
452 EBC_BXAP_TWT_ENCODE(5) | \
453 EBC_BXAP_CSN_ENCODE(0) | \
454 EBC_BXAP_OEN_ENCODE(4) | \
455 EBC_BXAP_WBN_ENCODE(0) | \
456 EBC_BXAP_WBF_ENCODE(0) | \
457 EBC_BXAP_TH_ENCODE(1) | \
458 EBC_BXAP_RE_DISABLED | \
459 EBC_BXAP_SOR_DELAYED | \
460 EBC_BXAP_BEM_RW | \
461 EBC_BXAP_PEN_DISABLED)
462#define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA3_BASE) | \
463 EBC_BXCR_BS_1MB | \
464 EBC_BXCR_BU_RW | \
465 EBC_BXCR_BW_32BIT)
466
467/*
468 * PPC4xx GPIO Configuration
469 */
470
471#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 Alternate2 Alternate3 */ \
472{ \
473/* GPIO Core 0 */ \
474{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \
475{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \
476{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \
477{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \
478{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \
479{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \
480{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \
481{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \
482{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \
483{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \
484{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \
485{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \
486{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \
487{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \
488{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \
489{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \
490{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \
491{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \
492{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \
493{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \
494{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \
495{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \
496{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \
497{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \
498{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \
499{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \
500{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \
501{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \
502{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \
503{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \
504{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \
505{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \
506}, \
507{ \
508/* GPIO Core 1 */ \
509{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \
510{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \
511{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
512{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
513{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \
514{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \
515{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
516{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
517{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \
518{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \
519{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \
520{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \
521{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \
522{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \
523{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \
524{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \
525{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \
526{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
527{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
528{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
529{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
530{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
531{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
532{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \
533{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
534{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
535{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
536{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
537{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
538{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
539{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
540{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
541} \
542}
543
544#endif /* __CONFIG_H */