Thomas Reufer | 8d56464 | 2010-11-17 16:08:18 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2006 Freescale Semiconductor, Inc. |
| 3 | * Dave Liu <daveliu@freescale.com> |
| 4 | * |
| 5 | * Copyright (C) 2007 Logic Product Development, Inc. |
| 6 | * Peter Barada <peterb@logicpd.com> |
| 7 | * |
| 8 | * Copyright (C) 2007 MontaVista Software, Inc. |
| 9 | * Anton Vorontsov <avorontsov@ru.mvista.com> |
| 10 | * |
| 11 | * (C) Copyright 2008 |
| 12 | * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| 13 | * |
| 14 | * (C) Copyright 2010 |
| 15 | * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com |
| 16 | * |
| 17 | * (C) Copyright 2010-2011 |
| 18 | * Thomas Reufer, KEYMILE Ltd, thomas.reufer@keymile.com |
| 19 | * |
| 20 | * This program is free software; you can redistribute it and/or |
| 21 | * modify it under the terms of the GNU General Public License as |
| 22 | * published by the Free Software Foundation; either version 2 of |
| 23 | * the License, or (at your option) any later version. |
| 24 | */ |
| 25 | |
| 26 | #ifndef __CONFIG_KM8321_COMMON_H |
| 27 | #define __CONFIG_KM8321_COMMON_H |
| 28 | |
| 29 | /* |
| 30 | * High Level Configuration Options |
| 31 | */ |
| 32 | #define CONFIG_QE /* Has QE */ |
| 33 | #define CONFIG_MPC832x /* MPC832x CPU specific */ |
| 34 | #define CONFIG_KM8321 /* Keymile PBEC8321 board specific */ |
| 35 | |
Holger Brunck | b648bfc | 2011-07-04 21:52:52 +0000 | [diff] [blame] | 36 | #define CONFIG_KM_DEF_ARCH "arch=ppc_8xx\0" |
Thomas Reufer | 8d56464 | 2010-11-17 16:08:18 +0100 | [diff] [blame] | 37 | |
| 38 | /* include common defines/options for all 83xx Keymile boards */ |
| 39 | #include "km83xx-common.h" |
| 40 | |
| 41 | #define CONFIG_MISC_INIT_R |
| 42 | |
| 43 | /* |
| 44 | * System IO Config |
| 45 | */ |
| 46 | #define CONFIG_SYS_SICRL SICRL_IRQ_CKS |
| 47 | |
| 48 | /* |
| 49 | * Hardware Reset Configuration Word |
| 50 | */ |
| 51 | #define CONFIG_SYS_HRCW_LOW (\ |
| 52 | HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \ |
| 53 | HRCWL_DDR_TO_SCB_CLK_2X1 | \ |
| 54 | HRCWL_CSB_TO_CLKIN_2X1 | \ |
| 55 | HRCWL_CORE_TO_CSB_2_5X1 | \ |
| 56 | HRCWL_CE_PLL_VCO_DIV_2 | \ |
| 57 | HRCWL_CE_TO_PLL_1X3) |
| 58 | |
| 59 | #define CONFIG_SYS_HRCW_HIGH (\ |
| 60 | HRCWH_PCI_AGENT | \ |
| 61 | HRCWH_PCI_ARBITER_DISABLE | \ |
| 62 | HRCWH_CORE_ENABLE | \ |
| 63 | HRCWH_FROM_0X00000100 | \ |
| 64 | HRCWH_BOOTSEQ_DISABLE | \ |
| 65 | HRCWH_SW_WATCHDOG_DISABLE | \ |
| 66 | HRCWH_ROM_LOC_LOCAL_16BIT | \ |
| 67 | HRCWH_BIG_ENDIAN | \ |
| 68 | HRCWH_LALE_NORMAL) |
| 69 | |
| 70 | #define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f |
| 71 | #define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ |
| 72 | SDRAM_CFG_32_BE | \ |
| 73 | SDRAM_CFG_SREN) |
| 74 | |
| 75 | #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 |
| 76 | #define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) |
| 77 | #define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ |
| 78 | (0x200 << SDRAM_INTERVAL_REFINT_SHIFT)) |
| 79 | |
| 80 | #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ |
| 81 | CSCONFIG_ODT_WR_CFG | \ |
| 82 | CSCONFIG_ROW_BIT_13 | \ |
| 83 | CSCONFIG_COL_BIT_10) |
| 84 | |
| 85 | #define CONFIG_SYS_DDR_MODE 0x47860252 |
| 86 | #define CONFIG_SYS_DDR_MODE2 0x8080c000 |
| 87 | |
| 88 | #define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ |
| 89 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ |
| 90 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ |
| 91 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ |
| 92 | (0 << TIMING_CFG0_WWT_SHIFT) | \ |
| 93 | (0 << TIMING_CFG0_RRT_SHIFT) | \ |
| 94 | (0 << TIMING_CFG0_WRT_SHIFT) | \ |
| 95 | (0 << TIMING_CFG0_RWT_SHIFT)) |
| 96 | |
| 97 | #define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ |
| 98 | (2 << TIMING_CFG1_WRTORD_SHIFT) | \ |
| 99 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ |
| 100 | (2 << TIMING_CFG1_WRREC_SHIFT) | \ |
| 101 | (6 << TIMING_CFG1_REFREC_SHIFT) | \ |
| 102 | (2 << TIMING_CFG1_ACTTORW_SHIFT) | \ |
| 103 | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ |
| 104 | (2 << TIMING_CFG1_PRETOACT_SHIFT)) |
| 105 | |
| 106 | #define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ |
| 107 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ |
| 108 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ |
| 109 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ |
| 110 | (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ |
| 111 | (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ |
| 112 | (5 << TIMING_CFG2_CPO_SHIFT)) |
| 113 | |
| 114 | #define CONFIG_SYS_DDR_TIMING_3 0x00000000 |
| 115 | |
Heiko Schocher | 8ed7434 | 2011-03-08 10:47:39 +0100 | [diff] [blame] | 116 | #define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 |
| 117 | #define CONFIG_SYS_KMBEC_FPGA_SIZE 128 |
Thomas Reufer | 8d56464 | 2010-11-17 16:08:18 +0100 | [diff] [blame] | 118 | |
| 119 | /* EEprom support */ |
| 120 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| 121 | |
| 122 | /* |
| 123 | * Local Bus Configuration & Clock Setup |
| 124 | */ |
| 125 | #define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2) |
| 126 | #define CONFIG_SYS_LBC_LBCR 0x00000000 |
| 127 | |
| 128 | /* |
| 129 | * MMU Setup |
| 130 | */ |
| 131 | #define CONFIG_SYS_IBAT7L (0) |
| 132 | #define CONFIG_SYS_IBAT7U (0) |
| 133 | #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L |
| 134 | #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U |
| 135 | |
| 136 | #endif /* __CONFIG_KM8321_COMMON_H */ |