blob: cae662eaa98bab3ec761d403afe3c4f03ab9069c [file] [log] [blame]
Wolfgang Denk460c3222005-08-04 01:14:12 +02001/* ported from ctfb.c (linux kernel):
2 * Created in Jan - July 2000 by Thomas Höhenleitner <th@visuelle-maschinen.de>
3 *
4 * Ported to U-Boot:
5 * (C) Copyright 2002 Denis Peter, MPL AG Switzerland
wdenkc6097192002-11-03 00:24:07 +00006 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
wdenkc6097192002-11-03 00:24:07 +000026#include <common.h>
27
28#ifdef CONFIG_VIDEO
29
30#include <pci.h>
31#include <video_fb.h>
wdenkeeb1b772004-03-23 22:53:55 +000032#include "videomodes.h"
wdenkc6097192002-11-03 00:24:07 +000033
wdenkc6097192002-11-03 00:24:07 +000034/* debug */
35#undef VGA_DEBUG
36#undef VGA_DUMP_REG
37#ifdef VGA_DEBUG
38#define PRINTF(fmt,args...) printf (fmt ,##args)
39#else
40#define PRINTF(fmt,args...)
41#endif
42
43/* Macros */
44#ifndef min
45#define min( a, b ) ( ( a ) < ( b ) ) ? ( a ) : ( b )
46#endif
47#ifndef max
48#define max( a, b ) ( ( a ) > ( b ) ) ? ( a ) : ( b )
49#endif
50#ifdef minmax
51#error "term minmax already used."
52#endif
53#define minmax( a, x, b ) max( ( a ), min( ( x ), ( b ) ) )
54#define N_ELTS( x ) ( sizeof( x ) / sizeof( x[ 0 ] ) )
55
56/* CT Register Offsets */
57#define CT_AR_O 0x3c0 /* Index and Data write port of the attribute Registers */
58#define CT_GR_O 0x3ce /* Index port of the Graphic Controller Registers */
59#define CT_SR_O 0x3c4 /* Index port of the Sequencer Controller */
60#define CT_CR_O 0x3d4 /* Index port of the CRT Controller */
61#define CT_XR_O 0x3d6 /* Extended Register index */
62#define CT_MSR_W_O 0x3c2 /* Misc. Output Register (write only) */
63#define CT_LUT_MASK_O 0x3c6 /* Color Palette Mask */
64#define CT_LUT_START_O 0x3c8 /* Color Palette Write Mode Index */
65#define CT_LUT_RGB_O 0x3c9 /* Color Palette Data Port */
66#define CT_STATUS_REG0_O 0x3c2 /* Status Register 0 (read only) */
67#define CT_STATUS_REG1_O 0x3da /* Input Status Register 1 (read only) */
68
69#define CT_FP_O 0x3d0 /* Index port of the Flat panel Registers */
70#define CT_MR_O 0x3d2 /* Index Port of the Multimedia Extension */
71
72/* defines for the memory mapped registers */
73#define BR00_o 0x400000 /* Source and Destination Span Register */
74#define BR01_o 0x400004 /* Pattern/Source Expansion Background Color & Transparency Key Register */
75#define BR02_o 0x400008 /* Pattern/Source Expansion Foreground Color Register */
76#define BR03_o 0x40000C /* Monochrome Source Control Register */
77#define BR04_o 0x400010 /* BitBLT Control Register */
78#define BR05_o 0x400014 /* Pattern Address Registe */
79#define BR06_o 0x400018 /* Source Address Register */
80#define BR07_o 0x40001C /* Destination Address Register */
81#define BR08_o 0x400020 /* Destination Width & Height Register */
82#define BR09_o 0x400024 /* Source Expansion Background Color & Transparency Key Register */
83#define BR0A_o 0x400028 /* Source Expansion Foreground Color Register */
84
85#define CURSOR_SIZE 0x1000 /* in KByte for HW Cursor */
86#define PATTERN_ADR (pGD->dprBase + CURSOR_SIZE) /* pattern Memory after Cursor Memory */
87#define PATTERN_SIZE 8*8*4 /* 4 Bytes per Pixel 8 x 8 Pixel */
88#define ACCELMEMORY (CURSOR_SIZE + PATTERN_SIZE) /* reserved Memory for BITBlt and hw cursor */
89
90/* Some Mode definitions */
91#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */
92#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */
93#define FB_SYNC_EXT 4 /* external sync */
94#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */
95#define FB_SYNC_BROADCAST 16 /* broadcast video timings */
96 /* vtotal = 144d/288n/576i => PAL */
97 /* vtotal = 121d/242n/484i => NTSC */
98#define FB_SYNC_ON_GREEN 32 /* sync on green */
99
100#define FB_VMODE_NONINTERLACED 0 /* non interlaced */
101#define FB_VMODE_INTERLACED 1 /* interlaced */
102#define FB_VMODE_DOUBLE 2 /* double scan */
103#define FB_VMODE_MASK 255
104
105#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */
106#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */
107#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */
108
109#define text 0
110#define fntwidth 8
111
112/* table for VGA Initialization */
113typedef struct {
114 const unsigned char reg;
115 const unsigned char val;
116} CT_CFG_TABLE;
117
118/* this table provides some basic initialisations such as Memory Clock etc */
119static CT_CFG_TABLE xreg[] = {
120 {0x09, 0x01}, /* CRT Controller Extensions Enable */
121 {0x0A, 0x02}, /* Frame Buffer Mapping */
122 {0x0B, 0x01}, /* PCI Write Burst support */
123 {0x20, 0x00}, /* BitBLT Configuration */
124 {0x40, 0x03}, /* Memory Access Control */
125 {0x60, 0x00}, /* Video Pin Control */
126 {0x61, 0x00}, /* DPMS Synch control */
127 {0x62, 0x00}, /* GPIO Pin Control */
128 {0x63, 0xBD}, /* GPIO Pin Data */
129 {0x67, 0x00}, /* Pin Tri-State */
130 {0x80, 0x80}, /* Pixel Pipeline Config 0 register */
131 {0xA0, 0x00}, /* Cursor 1 Control Reg */
132 {0xA1, 0x00}, /* Cursor 1 Vertical Extension Reg */
133 {0xA2, 0x00}, /* Cursor 1 Base Address Low */
134 {0xA3, 0x00}, /* Cursor 1 Base Address High */
135 {0xA4, 0x00}, /* Cursor 1 X-Position Low */
136 {0xA5, 0x00}, /* Cursor 1 X-Position High */
137 {0xA6, 0x00}, /* Cursor 1 Y-Position Low */
138 {0xA7, 0x00}, /* Cursor 1 Y-Position High */
139 {0xA8, 0x00}, /* Cursor 2 Control Reg */
140 {0xA9, 0x00}, /* Cursor 2 Vertical Extension Reg */
141 {0xAA, 0x00}, /* Cursor 2 Base Address Low */
142 {0xAB, 0x00}, /* Cursor 2 Base Address High */
143 {0xAC, 0x00}, /* Cursor 2 X-Position Low */
144 {0xAD, 0x00}, /* Cursor 2 X-Position High */
145 {0xAE, 0x00}, /* Cursor 2 Y-Position Low */
146 {0xAF, 0x00}, /* Cursor 2 Y-Position High */
147 {0xC0, 0x7D}, /* Dot Clock 0 VCO M-Divisor */
148 {0xC1, 0x07}, /* Dot Clock 0 VCO N-Divisor */
149 {0xC3, 0x34}, /* Dot Clock 0 Divisor select */
150 {0xC4, 0x55}, /* Dot Clock 1 VCO M-Divisor */
151 {0xC5, 0x09}, /* Dot Clock 1 VCO N-Divisor */
152 {0xC7, 0x24}, /* Dot Clock 1 Divisor select */
153 {0xC8, 0x7D}, /* Dot Clock 2 VCO M-Divisor */
154 {0xC9, 0x07}, /* Dot Clock 2 VCO N-Divisor */
155 {0xCB, 0x34}, /* Dot Clock 2 Divisor select */
156 {0xCC, 0x38}, /* Memory Clock 0 VCO M-Divisor */
157 {0xCD, 0x03}, /* Memory Clock 0 VCO N-Divisor */
158 {0xCE, 0x90}, /* Memory Clock 0 Divisor select */
159 {0xCF, 0x06}, /* Clock Config */
160 {0xD0, 0x0F}, /* Power Down */
161 {0xD1, 0x01}, /* Power Down BitBLT */
162 {0xFF, 0xFF} /* end of table */
163};
164/* Clock Config:
165 * =============
166 *
167 * PD Registers:
168 * -------------
169 * Bit2 and Bit4..6 are used for the Loop Divisor and Post Divisor.
170 * They are encoded as follows:
171 *
172 * +---+--------------+
173 * | 2 | Loop Divisor |
174 * +---+--------------+
175 * | 1 | 1 |
176 * +---+--------------+
177 * | 0 | 4 |
178 * +---+--------------+
179 * Note: The Memory Clock does not have a Loop Divisor.
180 * +---+---+---+--------------+
181 * | 6 | 5 | 4 | Post Divisor |
182 * +---+---+---+--------------+
183 * | 0 | 0 | 0 | 1 |
184 * +---+---+---+--------------+
185 * | 0 | 0 | 1 | 2 |
186 * +---+---+---+--------------+
187 * | 0 | 1 | 0 | 4 |
188 * +---+---+---+--------------+
189 * | 0 | 1 | 1 | 8 |
190 * +---+---+---+--------------+
191 * | 1 | 0 | 0 | 16 |
192 * +---+---+---+--------------+
193 * | 1 | 0 | 1 | 32 |
194 * +---+---+---+--------------+
195 * | 1 | 1 | X | reserved |
196 * +---+---+---+--------------+
197 *
198 * All other bits are reserved in these registers.
199 *
200 * Clock VCO M Registers:
201 * ----------------------
202 * These Registers contain the M Value -2.
203 *
204 * Clock VCO N Registers:
205 * ----------------------
206 * These Registers contain the N Value -2.
207 *
208 * Formulas:
209 * ---------
210 * Fvco = (Fref * Loop Divisor * M/N), whereas 100MHz < Fvco < 220MHz
211 * Fout = Fvco / Post Divisor
212 *
213 * Dot Clk0 (default 25MHz):
214 * -------------------------
215 * Fvco = 14.318 * 127 / 9 = 202.045MHz
216 * Fout = 202.045MHz / 8 = 25.25MHz
217 * Post Divisor = 8
218 * Loop Divisor = 1
219 * XRC0 = (M - 2) = 125 = 0x7D
220 * XRC1 = (N - 2) = 7 = 0x07
221 * XRC3 = 0x34
222 *
223 * Dot Clk1 (default 28MHz):
224 * -------------------------
225 * Fvco = 14.318 * 87 / 11 = 113.24MHz
226 * Fout = 113.24MHz / 4 = 28.31MHz
227 * Post Divisor = 4
228 * Loop Divisor = 1
229 * XRC4 = (M - 2) = 85 = 0x55
230 * XRC5 = (N - 2) = 9 = 0x09
231 * XRC7 = 0x24
232 *
233 * Dot Clk2 (variable for extended modes set to 25MHz):
234 * ----------------------------------------------------
235 * Fvco = 14.318 * 127 / 9 = 202.045MHz
236 * Fout = 202.045MHz / 8 = 25.25MHz
237 * Post Divisor = 8
238 * Loop Divisor = 1
239 * XRC8 = (M - 2) = 125 = 0x7D
240 * XRC9 = (N - 2) = 7 = 0x07
241 * XRCB = 0x34
242 *
243 * Memory Clk for most modes >50MHz:
244 * ----------------------------------
245 * Fvco = 14.318 * 58 / 5 = 166MHz
246 * Fout = 166MHz / 2 = 83MHz
247 * Post Divisor = 2
248 * XRCC = (M - 2) = 57 = 0x38
249 * XRCD = (N - 2) = 3 = 0x03
250 * XRCE = 0x90
251 *
252 * Note Bit7 enables the clock source from the VCO
253 *
254 */
255
wdenkc6097192002-11-03 00:24:07 +0000256/*******************************************************************
257 * Chips struct
258 *******************************************************************/
259struct ctfb_chips_properties {
260 int device_id; /* PCI Device ID */
261 unsigned long max_mem; /* memory for frame buffer */
262 int vld_set; /* value of VLD if bit2 in clock control is set */
263 int vld_not_set; /* value of VLD if bit2 in clock control is set */
264 int mn_diff; /* difference between M/N Value + mn_diff = M/N Register */
265 int mn_min; /* min value of M/N Value */
266 int mn_max; /* max value of M/N Value */
267 int vco_min; /* VCO Min in MHz */
268 int vco_max; /* VCO Max in MHz */
269};
270
271static const struct ctfb_chips_properties chips[] = {
272 {PCI_DEVICE_ID_CT_69000, 0x200000, 1, 4, -2, 3, 257, 100, 220},
Stefan Roesea7b9fb92006-01-18 20:05:34 +0100273#ifdef CONFIG_USE_CPCIDVI
274 {PCI_DEVICE_ID_CT_69030, 0x400000, 1, 4, -2, 3, 257, 100, 220},
275#endif
wdenkc6097192002-11-03 00:24:07 +0000276 {PCI_DEVICE_ID_CT_65555, 0x100000, 16, 4, 0, 1, 255, 48, 220}, /* NOT TESTED */
277 {0, 0, 0, 0, 0, 0, 0, 0, 0} /* Terminator */
278};
279
wdenkc6097192002-11-03 00:24:07 +0000280/*
281 * The Graphic Device
282 */
283GraphicDevice ctfb;
284
285/*******************************************************************************
286*
287* Low Level Routines
288*/
289
290/*******************************************************************************
291*
292* Read CT ISA register
293*/
294#ifdef VGA_DEBUG
295static unsigned char
296ctRead (unsigned short index)
297{
298 GraphicDevice *pGD = (GraphicDevice *) & ctfb;
299 if (index == CT_AR_O)
300 /* synch the Flip Flop */
301 in8 (pGD->isaBase + CT_STATUS_REG1_O);
302
303 return (in8 (pGD->isaBase + index));
304}
305#endif
306/*******************************************************************************
307*
308* Write CT ISA register
309*/
310static void
311ctWrite (unsigned short index, unsigned char val)
312{
313 GraphicDevice *pGD = (GraphicDevice *) & ctfb;
314
315 out8 ((pGD->isaBase + index), val);
316}
317
318/*******************************************************************************
319*
320* Read CT ISA register indexed
321*/
322static unsigned char
323ctRead_i (unsigned short index, char reg)
324{
325 GraphicDevice *pGD = (GraphicDevice *) & ctfb;
326 if (index == CT_AR_O)
327 /* synch the Flip Flop */
328 in8 (pGD->isaBase + CT_STATUS_REG1_O);
329 out8 ((pGD->isaBase + index), reg);
330 return (in8 (pGD->isaBase + index + 1));
331}
332
333/*******************************************************************************
334*
335* Write CT ISA register indexed
336*/
337static void
338ctWrite_i (unsigned short index, char reg, char val)
339{
340 GraphicDevice *pGD = (GraphicDevice *) & ctfb;
341 if (index == CT_AR_O) {
342 /* synch the Flip Flop */
343 in8 (pGD->isaBase + CT_STATUS_REG1_O);
344 out8 ((pGD->isaBase + index), reg);
345 out8 ((pGD->isaBase + index), val);
346 } else {
347 out8 ((pGD->isaBase + index), reg);
348 out8 ((pGD->isaBase + index + 1), val);
349 }
350}
351
352/*******************************************************************************
353*
354* Write a table of CT ISA register
355*/
356static void
357ctLoadRegs (unsigned short index, CT_CFG_TABLE * regTab)
358{
359 while (regTab->reg != 0xFF) {
360 ctWrite_i (index, regTab->reg, regTab->val);
361 regTab++;
362 }
363}
364
365/*****************************************************************************/
366static void
367SetArRegs (void)
368{
369 int i, tmp;
370
371 for (i = 0; i < 0x10; i++)
372 ctWrite_i (CT_AR_O, i, i);
373 if (text)
374 tmp = 0x04;
375 else
376 tmp = 0x41;
377
378 ctWrite_i (CT_AR_O, 0x10, tmp); /* Mode Control Register */
379 ctWrite_i (CT_AR_O, 0x11, 0x00); /* Overscan Color Register */
380 ctWrite_i (CT_AR_O, 0x12, 0x0f); /* Memory Plane Enable Register */
381 if (fntwidth == 9)
382 tmp = 0x08;
383 else
384 tmp = 0x00;
385 ctWrite_i (CT_AR_O, 0x13, tmp); /* Horizontal Pixel Panning */
386 ctWrite_i (CT_AR_O, 0x14, 0x00); /* Color Select Register */
387 ctWrite (CT_AR_O, 0x20); /* enable video */
388}
389
390/*****************************************************************************/
391static void
392SetGrRegs (void)
393{ /* Set Graphics Mode */
394 int i;
395
396 for (i = 0; i < 0x05; i++)
397 ctWrite_i (CT_GR_O, i, 0);
398 if (text) {
399 ctWrite_i (CT_GR_O, 0x05, 0x10);
400 ctWrite_i (CT_GR_O, 0x06, 0x02);
401 } else {
402 ctWrite_i (CT_GR_O, 0x05, 0x40);
403 ctWrite_i (CT_GR_O, 0x06, 0x05);
404 }
405 ctWrite_i (CT_GR_O, 0x07, 0x0f);
406 ctWrite_i (CT_GR_O, 0x08, 0xff);
407}
408
409/*****************************************************************************/
410static void
411SetSrRegs (void)
412{
413 int tmp = 0;
414
415 ctWrite_i (CT_SR_O, 0x00, 0x00); /* reset */
416 /*rr( sr, 0x01, tmp );
417 if( fntwidth == 8 ) tmp |= 0x01; else tmp &= ~0x01;
418 wr( sr, 0x01, tmp ); */
419 if (fntwidth == 8)
420 ctWrite_i (CT_SR_O, 0x01, 0x01); /* Clocking Mode Register */
421 else
422 ctWrite_i (CT_SR_O, 0x01, 0x00); /* Clocking Mode Register */
423 ctWrite_i (CT_SR_O, 0x02, 0x0f); /* Enable CPU wr access to given memory plane */
424 ctWrite_i (CT_SR_O, 0x03, 0x00); /* Character Map Select Register */
425 if (text)
426 tmp = 0x02;
427 else
428 tmp = 0x0e;
429 ctWrite_i (CT_SR_O, 0x04, tmp); /* Enable CPU accesses to the rest of the 256KB
430 total VGA memory beyond the first 64KB and set
431 fb mapping mode. */
432 ctWrite_i (CT_SR_O, 0x00, 0x03); /* enable */
433}
434
435/*****************************************************************************/
436static void
437SetBitsPerPixelIntoXrRegs (int bpp)
438{
439 unsigned int n = (bpp >> 3), tmp; /* only for 15, 8, 16, 24 bpp */
440 static char md[4] = { 0x04, 0x02, 0x05, 0x06 }; /* DisplayColorMode */
441 static char off[4] = { ~0x20, ~0x30, ~0x20, ~0x10 }; /* mask */
442 static char on[4] = { 0x10, 0x00, 0x10, 0x20 }; /* mask */
443 if (bpp == 15)
444 n = 0;
445 tmp = ctRead_i (CT_XR_O, 0x20);
446 tmp &= off[n];
447 tmp |= on[n];
448 ctWrite_i (CT_XR_O, 0x20, tmp); /* BitBLT Configuration */
449 ctWrite_i (CT_XR_O, 0x81, md[n]);
450}
451
452/*****************************************************************************/
453static void
454SetCrRegs (struct ctfb_res_modes *var, int bits_per_pixel)
455{ /* he -le- ht|0 hd -ri- hs -h- he */
456 unsigned char cr[0x7a];
457 int i, tmp;
458 unsigned int hd, hs, he, ht, hbe; /* Horizontal. */
459 unsigned int vd, vs, ve, vt; /* vertical */
460 unsigned int bpp, wd, dblscan, interlaced, bcast, CrtHalfLine;
461 unsigned int CompSyncCharClkDelay, CompSyncPixelClkDelay;
462 unsigned int NTSC_PAL_HorizontalPulseWidth, BlDelayCtrl;
463 unsigned int HorizontalEqualizationPulses;
464 unsigned int HorizontalSerration1Start, HorizontalSerration2Start;
465
466 const int LineCompare = 0x3ff;
467 unsigned int TextScanLines = 1; /* this is in fact a vertical zoom factor */
468 unsigned int RAMDAC_BlankPedestalEnable = 0; /* 1=en-, 0=disable, see XR82 */
469
470 hd = (var->xres) / 8; /* HDisp. */
471 hs = (var->xres + var->right_margin) / 8; /* HsStrt */
472 he = (var->xres + var->right_margin + var->hsync_len) / 8; /* HsEnd */
473 ht = (var->left_margin + var->xres + var->right_margin + var->hsync_len) / 8; /* HTotal */
474 hbe = ht - 1; /* HBlankEnable todo docu wants ht here, but it does not work */
475 /* ve -up- vt|0 vd -lo- vs -v- ve */
476 vd = var->yres; /* VDisplay */
477 vs = var->yres + var->lower_margin; /* VSyncStart */
478 ve = var->yres + var->lower_margin + var->vsync_len; /* VSyncEnd */
479 vt = var->upper_margin + var->yres + var->lower_margin + var->vsync_len; /* VTotal */
480 bpp = bits_per_pixel;
481 dblscan = (var->vmode & FB_VMODE_DOUBLE) ? 1 : 0;
482 interlaced = var->vmode & FB_VMODE_INTERLACED;
483 bcast = var->sync & FB_SYNC_BROADCAST;
484 CrtHalfLine = bcast ? (hd >> 1) : 0;
485 BlDelayCtrl = bcast ? 1 : 0;
486 CompSyncCharClkDelay = 0; /* 2 bit */
487 CompSyncPixelClkDelay = 0; /* 3 bit */
488 if (bcast) {
489 NTSC_PAL_HorizontalPulseWidth = 7; /*( var->hsync_len >> 1 ) + 1 */
490 HorizontalEqualizationPulses = 0; /* inverse value */
491 HorizontalSerration1Start = 31; /* ( ht >> 1 ) */
492 HorizontalSerration2Start = 89; /* ( ht >> 1 ) */
493 } else {
494 NTSC_PAL_HorizontalPulseWidth = 0;
495 /* 4 bit: hsync pulse width = ( ( CR74[4:0] - CR74[5] )
496 * / 2 ) + 1 --> CR74[4:0] = 2*(hs-1) + CR74[5] */
497 HorizontalEqualizationPulses = 1; /* inverse value */
498 HorizontalSerration1Start = 0; /* ( ht >> 1 ) */
499 HorizontalSerration2Start = 0; /* ( ht >> 1 ) */
500 }
501
502 if (bpp == 15)
503 bpp = 16;
504 wd = var->xres * bpp / 64; /* double words per line */
505 if (interlaced) { /* we divide all vertical timings, exept vd */
506 vs >>= 1;
507 ve >>= 1;
508 vt >>= 1;
509 }
510 memset (cr, 0, sizeof (cr));
511 cr[0x00] = 0xff & (ht - 5);
512 cr[0x01] = hd - 1; /* soll:4f ist 59 */
513 cr[0x02] = hd;
514 cr[0x03] = (hbe & 0x1F) | 0x80; /* hd + ht - hd */
515 cr[0x04] = hs;
516 cr[0x05] = ((hbe & 0x20) << 2) | (he & 0x1f);
517 cr[0x06] = (vt - 2) & 0xFF;
518 cr[0x30] = (vt - 2) >> 8;
519 cr[0x07] = ((vt & 0x100) >> 8)
520 | ((vd & 0x100) >> 7)
521 | ((vs & 0x100) >> 6)
522 | ((vs & 0x100) >> 5)
523 | ((LineCompare & 0x100) >> 4)
524 | ((vt & 0x200) >> 4)
525 | ((vd & 0x200) >> 3)
526 | ((vs & 0x200) >> 2);
527 cr[0x08] = 0x00;
528 cr[0x09] = (dblscan << 7)
529 | ((LineCompare & 0x200) >> 3)
530 | ((vs & 0x200) >> 4)
531 | (TextScanLines - 1);
532 cr[0x10] = vs & 0xff; /* VSyncPulseStart */
533 cr[0x32] = (vs & 0xf00) >> 8; /* VSyncPulseStart */
534 cr[0x11] = (ve & 0x0f); /* | 0x20; */
535 cr[0x12] = (vd - 1) & 0xff; /* LineCount */
536 cr[0x31] = ((vd - 1) & 0xf00) >> 8; /* LineCount */
537 cr[0x13] = wd & 0xff;
538 cr[0x41] = (wd & 0xf00) >> 8;
539 cr[0x15] = vs & 0xff;
540 cr[0x33] = (vs & 0xf00) >> 8;
541 cr[0x38] = (0x100 & (ht - 5)) >> 8;
542 cr[0x3C] = 0xc0 & hbe;
543 cr[0x16] = (vt - 1) & 0xff; /* vbe - docu wants vt here, */
544 cr[0x17] = 0xe3; /* but it does not work */
545 cr[0x18] = 0xff & LineCompare;
546 cr[0x22] = 0xff; /* todo? */
547 cr[0x70] = interlaced ? (0x80 | CrtHalfLine) : 0x00; /* check:0xa6 */
548 cr[0x71] = 0x80 | (RAMDAC_BlankPedestalEnable << 6)
549 | (BlDelayCtrl << 5)
550 | ((0x03 & CompSyncCharClkDelay) << 3)
551 | (0x07 & CompSyncPixelClkDelay); /* todo: see XR82 */
552 cr[0x72] = HorizontalSerration1Start;
553 cr[0x73] = HorizontalSerration2Start;
554 cr[0x74] = (HorizontalEqualizationPulses << 5)
555 | NTSC_PAL_HorizontalPulseWidth;
556 /* todo: ct69000 has also 0x75-79 */
557 /* now set the registers */
558 for (i = 0; i <= 0x0d; i++) { /*CR00 .. CR0D */
559 ctWrite_i (CT_CR_O, i, cr[i]);
560 }
561 for (i = 0x10; i <= 0x18; i++) { /*CR10 .. CR18 */
562 ctWrite_i (CT_CR_O, i, cr[i]);
563 }
564 i = 0x22; /*CR22 */
565 ctWrite_i (CT_CR_O, i, cr[i]);
566 for (i = 0x30; i <= 0x33; i++) { /*CR30 .. CR33 */
567 ctWrite_i (CT_CR_O, i, cr[i]);
568 }
569 i = 0x38; /*CR38 */
570 ctWrite_i (CT_CR_O, i, cr[i]);
571 i = 0x3C; /*CR3C */
572 ctWrite_i (CT_CR_O, i, cr[i]);
573 for (i = 0x40; i <= 0x41; i++) { /*CR40 .. CR41 */
574 ctWrite_i (CT_CR_O, i, cr[i]);
575 }
576 for (i = 0x70; i <= 0x74; i++) { /*CR70 .. CR74 */
577 ctWrite_i (CT_CR_O, i, cr[i]);
578 }
579 tmp = ctRead_i (CT_CR_O, 0x40);
580 tmp &= 0x0f;
581 tmp |= 0x80;
582 ctWrite_i (CT_CR_O, 0x40, tmp); /* StartAddressEnable */
583}
584
585/* pixelclock control */
586
587/*****************************************************************************
588 We have a rational number p/q and need an m/n which is very close to p/q
589 but has m and n within mnmin and mnmax. We have no floating point in the
590 kernel. We can use long long without divide. And we have time to compute...
591******************************************************************************/
592static unsigned int
593FindBestPQFittingMN (unsigned int p, unsigned int q, unsigned int mnmin,
594 unsigned int mnmax, unsigned int *pm, unsigned int *pn)
595{
596 /* this code is not for general purpose usable but good for our number ranges */
597 unsigned int n = mnmin, m = 0;
598 long long int L = 0, P = p, Q = q, H = P >> 1;
599 long long int D = 0x7ffffffffffffffLL;
600 for (n = mnmin; n <= mnmax; n++) {
601 m = mnmin; /* p/q ~ m/n -> p*n ~ m*q -> p*n-x*q ~ 0 */
602 L = P * n - m * Q; /* n * vco - m * fref should be near 0 */
603 while (L > 0 && m < mnmax) {
604 L -= q; /* difference is greater as 0 subtract fref */
605 m++; /* and increment m */
606 }
607 /* difference is less or equal than 0 or m > maximum */
608 if (m > mnmax)
609 break; /* no solution: if we increase n we get the same situation */
610 /* L is <= 0 now */
611 if (-L > H && m > mnmin) { /* if difference > the half fref */
612 L += q; /* we take the situation before */
613 m--; /* because its closer to 0 */
614 }
615 L = (L < 0) ? -L : +L; /* absolute value */
616 if (D < L) /* if last difference was better take next n */
617 continue;
618 D = L;
619 *pm = m;
620 *pn = n; /* keep improved data */
621 if (D == 0)
622 break; /* best result we can get */
623 }
624 return (unsigned int) (0xffffffff & D);
625}
626
627/* that is the hardware < 69000 we have to manage
628 +---------+ +-------------------+ +----------------------+ +--+
629 | REFCLK |__|NTSC Divisor Select|__|FVCO Reference Divisor|__|÷N|__
630 | 14.3MHz | |(NTSCDS) (÷1, ÷5) | |Select (RDS) (÷1, ÷4) | | | |
631 +---------+ +-------------------+ +----------------------+ +--+ |
632 ___________________________________________________________________|
633 |
634 | fvco fout
635 | +--------+ +------------+ +-----+ +-------------------+ +----+
636 +-| Phase |__|Charge Pump |__| VCO |_____|Post Divisor (PD) |___|CLK |--->
637 +-| Detect | |& Filter VCO| | | | |÷1, 2, 4, 8, 16, 32| | |
638 | +--------+ +------------+ +-----+ | +-------------------+ +----+
639 | |
640 | +--+ +---------------+ |
641 |____|÷M|___|VCO Loop Divide|__________|
642 | | |(VLD)(÷4, ÷16) |
643 +--+ +---------------+
644****************************************************************************
645 that is the hardware >= 69000 we have to manage
646 +---------+ +--+
647 | REFCLK |__|÷N|__
648 | 14.3MHz | | | |
649 +---------+ +--+ |
650 __________________|
651 |
652 | fvco fout
653 | +--------+ +------------+ +-----+ +-------------------+ +----+
654 +-| Phase |__|Charge Pump |__| VCO |_____|Post Divisor (PD) |___|CLK |--->
655 +-| Detect | |& Filter VCO| | | | |÷1, 2, 4, 8, 16, 32| | |
656 | +--------+ +------------+ +-----+ | +-------------------+ +----+
657 | |
658 | +--+ +---------------+ |
659 |____|÷M|___|VCO Loop Divide|__________|
660 | | |(VLD)(÷1, ÷4) |
661 +--+ +---------------+
662
663
664*/
665
666#define VIDEO_FREF 14318180; /* Hz */
667/*****************************************************************************/
668static int
669ReadPixClckFromXrRegsBack (struct ctfb_chips_properties *param)
670{
671 unsigned int m, n, vld, pd, PD, fref, xr_cb, i, pixclock;
672 i = 0;
673 pixclock = -1;
674 fref = VIDEO_FREF;
675 m = ctRead_i (CT_XR_O, 0xc8);
676 n = ctRead_i (CT_XR_O, 0xc9);
677 m -= param->mn_diff;
678 n -= param->mn_diff;
679 xr_cb = ctRead_i (CT_XR_O, 0xcb);
680 PD = (0x70 & xr_cb) >> 4;
681 pd = 1;
682 for (i = 0; i < PD; i++) {
683 pd *= 2;
684 }
685 vld = (0x04 & xr_cb) ? param->vld_set : param->vld_not_set;
686 if (n * vld * m) {
687 unsigned long long p = 1000000000000LL * pd * n;
688 unsigned long long q = (long long) fref * vld * m;
689 while ((p > 0xffffffffLL) || (q > 0xffffffffLL)) {
690 p >>= 1; /* can't divide with long long so we scale down */
691 q >>= 1;
692 }
693 pixclock = (unsigned) p / (unsigned) q;
694 } else
695 printf ("Invalid data in xr regs.\n");
696 return pixclock;
697}
698
699/*****************************************************************************/
700static void
701FindAndSetPllParamIntoXrRegs (unsigned int pixelclock,
702 struct ctfb_chips_properties *param)
703{
704 unsigned int m, n, vld, pd, PD, fref, xr_cb;
705 unsigned int fvcomin, fvcomax, pclckmin, pclckmax, pclk;
706 unsigned int pfreq, fvco, new_pixclock;
wdenk3e386912003-04-05 00:53:31 +0000707 unsigned int D,nback,mback;
wdenkc6097192002-11-03 00:24:07 +0000708
709 fref = VIDEO_FREF;
710 pd = 1;
711 PD = 0;
712 fvcomin = param->vco_min;
713 fvcomax = param->vco_max; /* MHz */
714 pclckmin = 1000000 / fvcomax + 1; /* 4546 */
715 pclckmax = 32000000 / fvcomin - 1; /* 666665 */
716 pclk = minmax (pclckmin, pixelclock, pclckmax); /* ps pp */
717 pfreq = 250 * (4000000000U / pclk);
718 fvco = pfreq; /* Hz */
719 new_pixclock = 0;
720 while (fvco < fvcomin * 1000000) {
721 /* double VCO starting with the pixelclock frequency
722 * as long as it is lower than the minimal VCO frequency */
723 fvco *= 2;
724 pd *= 2;
725 PD++;
726 }
727 /* fvco is exactly pd * pixelclock and higher than the ninmal VCO frequency */
wdenk3e386912003-04-05 00:53:31 +0000728 /* first try */
729 vld = param->vld_set;
730 D=FindBestPQFittingMN (fvco / vld, fref, param->mn_min, param->mn_max, &m, &n); /* rds = 1 */
731 mback=m;
732 nback=n;
733 /* second try */
734 vld = param->vld_not_set;
735 if(D<FindBestPQFittingMN (fvco / vld, fref, param->mn_min, param->mn_max, &m, &n)) { /* rds = 1 */
736 /* first try was better */
737 m=mback;
738 n=nback;
739 vld = param->vld_set;
740 }
wdenkc6097192002-11-03 00:24:07 +0000741 m += param->mn_diff;
742 n += param->mn_diff;
743 PRINTF ("VCO %d, pd %d, m %d n %d vld %d \n", fvco, pd, m, n, vld);
744 xr_cb = ((0x7 & PD) << 4) | (vld == param->vld_set ? 0x04 : 0);
745 /* All four of the registers used for dot clock 2 (XRC8 - XRCB) must be
746 * written, and in order from XRC8 to XRCB, before the hardware will
747 * update the synthesizer s settings.
748 */
749 ctWrite_i (CT_XR_O, 0xc8, m);
750 ctWrite_i (CT_XR_O, 0xc9, n); /* xrca does not exist in CT69000 and CT69030 */
751 ctWrite_i (CT_XR_O, 0xca, 0); /* because of a hw bug I guess, but we write */
752 ctWrite_i (CT_XR_O, 0xcb, xr_cb); /* 0 to it for savety */
753 new_pixclock = ReadPixClckFromXrRegsBack (param);
754 PRINTF ("pixelclock.set = %d, pixelclock.real = %d \n",
755 pixelclock, new_pixclock);
756}
757
758/*****************************************************************************/
759static void
760SetMsrRegs (struct ctfb_res_modes *mode)
761{
762 unsigned char h_synch_high, v_synch_high;
763
764 h_synch_high = (mode->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x40; /* horizontal Synch High active */
765 v_synch_high = (mode->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x80; /* vertical Synch High active */
766 ctWrite (CT_MSR_W_O, (h_synch_high | v_synch_high | 0x29));
767 /* upper64K==0x20, CLC2select==0x08, RAMenable==0x02!(todo), CGA==0x01
768 * Selects the upper 64KB page.Bit5=1
769 * CLK2 (left reserved in standard VGA) Bit3|2=1|0
770 * Disables CPU access to frame buffer. Bit1=0
771 * Sets the I/O address decode for ST01, FCR, and all CR registers
772 * to the 3Dx I/O address range (CGA emulation). Bit0=1
773 */
774}
775
776/************************************************************************************/
777#ifdef VGA_DUMP_REG
778
779static void
780ctDispRegs (unsigned short index, int from, int to)
781{
782 unsigned char status;
783 int i;
784
785 for (i = from; i < to; i++) {
786 status = ctRead_i (index, i);
787 printf ("%02X: is %02X\n", i, status);
788 }
789}
790
791void
792video_dump_reg (void)
793{
794 int i;
795
796 printf ("Extended Regs:\n");
797 ctDispRegs (CT_XR_O, 0, 0xC);
798 ctDispRegs (CT_XR_O, 0xe, 0xf);
799 ctDispRegs (CT_XR_O, 0x20, 0x21);
800 ctDispRegs (CT_XR_O, 0x40, 0x50);
801 ctDispRegs (CT_XR_O, 0x60, 0x64);
802 ctDispRegs (CT_XR_O, 0x67, 0x68);
803 ctDispRegs (CT_XR_O, 0x70, 0x72);
804 ctDispRegs (CT_XR_O, 0x80, 0x83);
805 ctDispRegs (CT_XR_O, 0xA0, 0xB0);
806 ctDispRegs (CT_XR_O, 0xC0, 0xD3);
807 printf ("Sequencer Regs:\n");
808 ctDispRegs (CT_SR_O, 0, 0x8);
809 printf ("Graphic Regs:\n");
810 ctDispRegs (CT_GR_O, 0, 0x9);
811 printf ("CRT Regs:\n");
812 ctDispRegs (CT_CR_O, 0, 0x19);
813 ctDispRegs (CT_CR_O, 0x22, 0x23);
814 ctDispRegs (CT_CR_O, 0x30, 0x34);
815 ctDispRegs (CT_CR_O, 0x38, 0x39);
816 ctDispRegs (CT_CR_O, 0x3C, 0x3D);
817 ctDispRegs (CT_CR_O, 0x40, 0x42);
818 ctDispRegs (CT_CR_O, 0x70, 0x80);
819 /* don't display the attributes */
820}
821
822#endif
823
824#ifdef CONFIG_VIDEO_HW_CURSOR
825/***************************************************************
826 * Set Hardware Cursor in Pixel
827 */
828void
829video_set_hw_cursor (int x, int y)
830{
831 int sig_x = 0, sig_y = 0;
832 if (x < 0) {
833 x *= -1;
834 sig_x = 1;
835 }
836 if (y < 0) {
837 y *= -1;
838 sig_y = 1;
839 }
840 ctWrite_i (CT_XR_O, 0xa4, x & 0xff);
841 ctWrite_i (CT_XR_O, 0xa5, (x >> 8) & 0x7);
842 ctWrite_i (CT_XR_O, 0xa6, y & 0xff);
843 ctWrite_i (CT_XR_O, 0xa7, (y >> 8) & 0x7);
844}
845
846/***************************************************************
847 * Init Hardware Cursor. To know the size of the Cursor,
848 * we have to know the Font size.
849 */
850void
851video_init_hw_cursor (int font_width, int font_height)
852{
853 unsigned char xr_80;
854 unsigned long *curs, pattern;
855 int i;
856 int cursor_start;
857 GraphicDevice *pGD = (GraphicDevice *) & ctfb;
858
859 cursor_start = pGD->dprBase;
860 xr_80 = ctRead_i (CT_XR_O, 0x80);
861 /* set start address */
862 ctWrite_i (CT_XR_O, 0xa2, (cursor_start >> 8) & 0xf0);
863 ctWrite_i (CT_XR_O, 0xa3, (cursor_start >> 16) & 0x3f);
864 /* set cursor shape */
865 curs = (unsigned long *) cursor_start;
866 i = 0;
867 while (i < 0x400) {
868 curs[i++] = 0xffffffff; /* AND mask */
869 curs[i++] = 0xffffffff; /* AND mask */
870 curs[i++] = 0; /* XOR mask */
871 curs[i++] = 0; /* XOR mask */
872 /* Transparent */
873 }
874 pattern = 0xffffffff >> font_width;
875 i = 0;
876 while (i < (font_height * 2)) {
877 curs[i++] = pattern; /* AND mask */
878 curs[i++] = pattern; /* AND mask */
879 curs[i++] = 0; /* XOR mask */
880 curs[i++] = 0; /* XOR mask */
881 /* Cursor Color 0 */
882 }
883 /* set blink rate */
884 ctWrite_i (CT_FP_O, 0x19, 0xf);
885
886 /* set cursors colors */
887 xr_80 = ctRead_i (CT_XR_O, 0x80);
888 xr_80 |= 0x1; /* alternate palette select */
889 ctWrite_i (CT_XR_O, 0x80, xr_80);
890 video_set_lut (4, CONSOLE_FG_COL, CONSOLE_FG_COL, CONSOLE_FG_COL);
891 /* position 4 is color 0 cursor 0 */
892 xr_80 &= 0xfe; /* normal palette select */
893 ctWrite_i (CT_XR_O, 0x80, xr_80);
894 /* cursor enable */
895 ctWrite_i (CT_XR_O, 0xa0, 0x91);
896 xr_80 |= 0x10; /* enable hwcursor */
897 ctWrite_i (CT_XR_O, 0x80, xr_80);
898 video_set_hw_cursor (0, 0);
899}
900#endif /* CONFIG_VIDEO_HW_CURSOR */
901
902/***************************************************************
903 * Wait for BitBlt ready
904 */
905static int
906video_wait_bitblt (unsigned long addr)
907{
908 unsigned long br04;
909 int i = 0;
910 br04 = in32r (addr);
911 while (br04 & 0x80000000) {
912 udelay (1);
913 br04 = in32r (addr);
914 if (i++ > 1000000) {
915 printf ("ERROR Timeout %lx\n", br04);
916 return 1;
917 }
918 }
919 return 0;
920}
921
922/***************************************************************
923 * Set up BitBlt Registrs
924 */
925static void
926SetDrawingEngine (int bits_per_pixel)
927{
928 unsigned long br04, br00;
929 unsigned char tmp;
930
931 GraphicDevice *pGD = (GraphicDevice *) & ctfb;
932
933 tmp = ctRead_i (CT_XR_O, 0x20); /* BitBLT Configuration */
934 tmp |= 0x02; /* reset BitBLT */
935 ctWrite_i (CT_XR_O, 0x20, tmp); /* BitBLT Configuration */
936 udelay (10);
937 tmp &= 0xfd; /* release reset BitBLT */
938 ctWrite_i (CT_XR_O, 0x20, tmp); /* BitBLT Configuration */
939 video_wait_bitblt (pGD->pciBase + BR04_o);
940
941 /* set pattern Address */
942 out32r (pGD->pciBase + BR05_o, PATTERN_ADR & 0x003ffff8);
943 br04 = 0;
944 if (bits_per_pixel == 1) {
945 br04 |= 0x00040000; /* monochome Pattern */
946 br04 |= 0x00001000; /* monochome source */
947 }
948 br00 = ((pGD->winSizeX * pGD->gdfBytesPP) << 16) + (pGD->winSizeX * pGD->gdfBytesPP); /* bytes per scanline */
949 out32r (pGD->pciBase + BR00_o, br00); /* */
950 out32r (pGD->pciBase + BR08_o, (10 << 16) + 10); /* dummy */
951 out32r (pGD->pciBase + BR04_o, br04); /* write all 0 */
952 out32r (pGD->pciBase + BR07_o, 0); /* destination */
953 video_wait_bitblt (pGD->pciBase + BR04_o);
954}
955
wdenkc6097192002-11-03 00:24:07 +0000956/****************************************************************************
957* supported Video Chips
958*/
959static struct pci_device_id supported[] = {
960 {PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69000},
Stefan Roesea7b9fb92006-01-18 20:05:34 +0100961#ifdef CONFIG_USE_CPCIDVI
962 {PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030},
963#endif
wdenkc6097192002-11-03 00:24:07 +0000964 {}
965};
966
967/*******************************************************************************
968*
969* Init video chip
970*/
971void *
972video_hw_init (void)
973{
974 GraphicDevice *pGD = (GraphicDevice *) & ctfb;
975 unsigned short device_id;
976 pci_dev_t devbusfn;
977 int videomode;
978 unsigned long t1, hsynch, vsynch;
979 unsigned int pci_mem_base, *vm;
980 int tmp, i, bits_per_pixel;
981 char *penv;
982 struct ctfb_res_modes *res_mode;
983 struct ctfb_res_modes var_mode;
984 struct ctfb_chips_properties *chips_param;
985 /* Search for video chip */
986
987 if ((devbusfn = pci_find_devices (supported, 0)) < 0) {
988#ifdef CONFIG_VIDEO_ONBOARD
989 printf ("Video: Controller not found !\n");
990#endif
991 return (NULL);
992 }
993
994 /* PCI setup */
995 pci_write_config_dword (devbusfn, PCI_COMMAND,
996 (PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
997 pci_read_config_word (devbusfn, PCI_DEVICE_ID, &device_id);
998 pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, &pci_mem_base);
999 pci_mem_base = pci_mem_to_phys (devbusfn, pci_mem_base);
1000
1001 /* get chips params */
1002 for (chips_param = (struct ctfb_chips_properties *) &chips[0];
1003 chips_param->device_id != 0; chips_param++) {
1004 if (chips_param->device_id == device_id)
1005 break;
1006 }
1007 if (chips_param->device_id == 0) {
1008#ifdef CONFIG_VIDEO_ONBOARD
1009 printf ("Video: controller 0x%X not supported\n", device_id);
1010#endif
1011 return NULL;
1012 }
1013 /* supported Video controller found */
1014 printf ("Video: ");
1015
1016 tmp = 0;
1017 videomode = 0x301;
1018 /* get video mode via environment */
1019 if ((penv = getenv ("videomode")) != NULL) {
1020 /* deceide if it is a string */
1021 if (penv[0] <= '9') {
1022 videomode = (int) simple_strtoul (penv, NULL, 16);
1023 tmp = 1;
1024 }
1025 } else {
1026 tmp = 1;
1027 }
1028 if (tmp) {
1029 /* parameter are vesa modes */
1030 /* search params */
1031 for (i = 0; i < VESA_MODES_COUNT; i++) {
1032 if (vesa_modes[i].vesanr == videomode)
1033 break;
1034 }
1035 if (i == VESA_MODES_COUNT) {
1036 printf ("no VESA Mode found, switching to mode 0x301 ");
1037 i = 0;
1038 }
1039 res_mode =
1040 (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i].
1041 resindex];
1042 bits_per_pixel = vesa_modes[i].bits_per_pixel;
1043 } else {
1044
1045 res_mode = (struct ctfb_res_modes *) &var_mode;
1046 bits_per_pixel = video_get_params (res_mode, penv);
1047 }
1048
1049 /* calculate available color depth for controller memory */
1050 if (bits_per_pixel == 15)
1051 tmp = 2;
1052 else
1053 tmp = bits_per_pixel >> 3; /* /8 */
1054 if (((chips_param->max_mem -
1055 ACCELMEMORY) / (res_mode->xres * res_mode->yres)) < tmp) {
1056 tmp =
1057 ((chips_param->max_mem -
1058 ACCELMEMORY) / (res_mode->xres * res_mode->yres));
1059 if (tmp == 0) {
1060 printf
1061 ("No matching videomode found .-> reduce resolution\n");
1062 return NULL;
1063 } else {
1064 printf ("Switching back to %d Bits per Pixel ",
1065 tmp << 3);
1066 bits_per_pixel = tmp << 3;
1067 }
1068 }
1069
1070 /* calculate hsynch and vsynch freq (info only) */
1071 t1 = (res_mode->left_margin + res_mode->xres +
1072 res_mode->right_margin + res_mode->hsync_len) / 8;
1073 t1 *= 8;
1074 t1 *= res_mode->pixclock;
1075 t1 /= 1000;
1076 hsynch = 1000000000L / t1;
1077 t1 *=
1078 (res_mode->upper_margin + res_mode->yres +
1079 res_mode->lower_margin + res_mode->vsync_len);
1080 t1 /= 1000;
1081 vsynch = 1000000000L / t1;
1082
1083 /* fill in Graphic device struct */
1084 sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres,
1085 res_mode->yres, bits_per_pixel, (hsynch / 1000),
1086 (vsynch / 1000));
1087 printf ("%s\n", pGD->modeIdent);
1088 pGD->winSizeX = res_mode->xres;
1089 pGD->winSizeY = res_mode->yres;
1090 pGD->plnSizeX = res_mode->xres;
1091 pGD->plnSizeY = res_mode->yres;
1092 switch (bits_per_pixel) {
1093 case 8:
1094 pGD->gdfBytesPP = 1;
1095 pGD->gdfIndex = GDF__8BIT_INDEX;
1096 break;
1097 case 15:
1098 pGD->gdfBytesPP = 2;
1099 pGD->gdfIndex = GDF_15BIT_555RGB;
1100 break;
1101 case 16:
1102 pGD->gdfBytesPP = 2;
1103 pGD->gdfIndex = GDF_16BIT_565RGB;
1104 break;
1105 case 24:
1106 pGD->gdfBytesPP = 3;
1107 pGD->gdfIndex = GDF_24BIT_888RGB;
1108 break;
1109 }
1110 pGD->isaBase = CFG_ISA_IO_BASE_ADDRESS;
1111 pGD->pciBase = pci_mem_base;
1112 pGD->frameAdrs = pci_mem_base;
1113 pGD->memSize = chips_param->max_mem;
1114 /* Cursor Start Address */
1115 pGD->dprBase =
1116 (pGD->winSizeX * pGD->winSizeY * pGD->gdfBytesPP) + pci_mem_base;
1117 if ((pGD->dprBase & 0x0fff) != 0) {
1118 /* allign it */
1119 pGD->dprBase &= 0xfffff000;
1120 pGD->dprBase += 0x00001000;
1121 }
1122 PRINTF ("Cursor Start %x Pattern Start %x\n", pGD->dprBase,
1123 PATTERN_ADR);
1124 pGD->vprBase = pci_mem_base; /* Dummy */
1125 pGD->cprBase = pci_mem_base; /* Dummy */
1126 /* set up Hardware */
1127
Stefan Roesea7b9fb92006-01-18 20:05:34 +01001128#ifdef CONFIG_USE_CPCIDVI
1129 if (device_id == PCI_DEVICE_ID_CT_69030) {
1130 ctWrite (CT_MSR_W_O, 0x0b);
1131 ctWrite (0x3cd, 0x13);
1132 ctWrite_i (CT_FP_O, 0x02, 0x00);
1133 ctWrite_i (CT_FP_O, 0x05, 0x00);
1134 ctWrite_i (CT_FP_O, 0x06, 0x00);
1135 ctWrite (0x3c2, 0x0b);
1136 ctWrite_i (CT_FP_O, 0x02, 0x10);
1137 ctWrite_i (CT_FP_O, 0x01, 0x09);
1138 } else {
1139 ctWrite (CT_MSR_W_O, 0x01);
1140 }
1141#else
wdenkc6097192002-11-03 00:24:07 +00001142 ctWrite (CT_MSR_W_O, 0x01);
Stefan Roesea7b9fb92006-01-18 20:05:34 +01001143#endif
wdenkc6097192002-11-03 00:24:07 +00001144
1145 /* set the extended Registers */
1146 ctLoadRegs (CT_XR_O, xreg);
1147 /* set atribute registers */
1148 SetArRegs ();
1149 /* set Graphics register */
1150 SetGrRegs ();
1151 /* set sequencer */
1152 SetSrRegs ();
1153
1154 /* set msr */
1155 SetMsrRegs (res_mode);
1156
1157 /* set CRT Registers */
1158 SetCrRegs (res_mode, bits_per_pixel);
1159 /* set color mode */
1160 SetBitsPerPixelIntoXrRegs (bits_per_pixel);
1161
1162 /* set PLL */
1163 FindAndSetPllParamIntoXrRegs (res_mode->pixclock, chips_param);
1164
1165 ctWrite_i (CT_SR_O, 0, 0x03); /* clear synchronous reset */
1166 /* Clear video memory */
1167 i = pGD->memSize / 4;
1168 vm = (unsigned int *) pGD->pciBase;
1169 while (i--)
1170 *vm++ = 0;
1171 SetDrawingEngine (bits_per_pixel);
1172#ifdef VGA_DUMP_REG
1173 video_dump_reg ();
1174#endif
1175
1176 return ((void *) &ctfb);
1177}
1178
1179 /*******************************************************************************
1180*
1181* Set a RGB color in the LUT (8 bit index)
1182*/
1183void
1184video_set_lut (unsigned int index, /* color number */
1185 unsigned char r, /* red */
1186 unsigned char g, /* green */
1187 unsigned char b /* blue */
1188 )
1189{
1190
1191 ctWrite (CT_LUT_MASK_O, 0xff);
1192
1193 ctWrite (CT_LUT_START_O, (char) index);
1194
1195 ctWrite (CT_LUT_RGB_O, r); /* red */
1196 ctWrite (CT_LUT_RGB_O, g); /* green */
1197 ctWrite (CT_LUT_RGB_O, b); /* blue */
1198 udelay (1);
1199 ctWrite (CT_LUT_MASK_O, 0xff);
1200}
1201
1202/*******************************************************************************
1203*
1204* Drawing engine fill on screen region
1205*/
1206void
1207video_hw_rectfill (unsigned int bpp, /* bytes per pixel */
1208 unsigned int dst_x, /* dest pos x */
1209 unsigned int dst_y, /* dest pos y */
1210 unsigned int dim_x, /* frame width */
1211 unsigned int dim_y, /* frame height */
1212 unsigned int color /* fill color */
1213 )
1214{
1215 GraphicDevice *pGD = (GraphicDevice *) & ctfb;
1216 unsigned long *p, br04;
1217
1218 video_wait_bitblt (pGD->pciBase + BR04_o);
1219
1220 p = (unsigned long *) PATTERN_ADR;
1221 dim_x *= bpp;
1222 if (bpp == 3)
1223 bpp++; /* 24Bit needs a 32bit pattern */
1224 memset (p, color, (bpp * sizeof (unsigned char) * 8 * 8)); /* 8 x 8 pattern data */
1225 out32r (pGD->pciBase + BR07_o, ((pGD->winSizeX * dst_y) + dst_x) * pGD->gdfBytesPP); /* destination */
1226 br04 = in32r (pGD->pciBase + BR04_o) & 0xffffff00;
1227 br04 |= 0xF0; /* write Pattern P -> D */
1228 out32r (pGD->pciBase + BR04_o, br04); /* */
1229 out32r (pGD->pciBase + BR08_o, (dim_y << 16) + dim_x); /* starts the BITBlt */
1230 video_wait_bitblt (pGD->pciBase + BR04_o);
1231}
1232
1233/*******************************************************************************
1234*
1235* Drawing engine bitblt with screen region
1236*/
1237void
1238video_hw_bitblt (unsigned int bpp, /* bytes per pixel */
1239 unsigned int src_x, /* source pos x */
1240 unsigned int src_y, /* source pos y */
1241 unsigned int dst_x, /* dest pos x */
1242 unsigned int dst_y, /* dest pos y */
1243 unsigned int dim_x, /* frame width */
1244 unsigned int dim_y /* frame height */
1245 )
1246{
1247 GraphicDevice *pGD = (GraphicDevice *) & ctfb;
1248 unsigned long br04;
1249
1250 br04 = in32r (pGD->pciBase + BR04_o);
1251
1252 /* to prevent data corruption due to overlap, we have to
1253 * find out if, and how the frames overlaps */
1254 if (src_x < dst_x) {
1255 /* src is more left than dest
1256 * the frame may overlap -> start from right to left */
1257 br04 |= 0x00000100; /* set bit 8 */
1258 src_x += dim_x;
1259 dst_x += dim_x;
1260 } else {
1261 br04 &= 0xfffffeff; /* clear bit 8 left to right */
1262 }
1263 if (src_y < dst_y) {
1264 /* src is higher than dst
1265 * the frame may overlap => start from bottom */
1266 br04 |= 0x00000200; /* set bit 9 */
1267 src_y += dim_y;
1268 dst_y += dim_y;
1269 } else {
1270 br04 &= 0xfffffdff; /* clear bit 9 top to bottom */
1271 }
1272 dim_x *= bpp;
1273 out32r (pGD->pciBase + BR06_o, ((pGD->winSizeX * src_y) + src_x) * pGD->gdfBytesPP); /* source */
1274 out32r (pGD->pciBase + BR07_o, ((pGD->winSizeX * dst_y) + dst_x) * pGD->gdfBytesPP); /* destination */
1275 br04 &= 0xffffff00;
1276 br04 |= 0x000000CC; /* S -> D */
1277 out32r (pGD->pciBase + BR04_o, br04); /* */
1278 out32r (pGD->pciBase + BR08_o, (dim_y << 16) + dim_x); /* start the BITBlt */
1279 video_wait_bitblt (pGD->pciBase + BR04_o);
1280}
wdenkc6097192002-11-03 00:24:07 +00001281#endif /* CONFIG_VIDEO */