| Matthias Fuchs | 15a08bc | 2008-01-17 10:52:30 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2008 |
| 3 | * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | #include <ppc_asm.tmpl> |
| 25 | #include <asm-ppc/mmu.h> |
| 26 | #include <config.h> |
| 27 | |
| 28 | /* |
| 29 | * TLB TABLE |
| 30 | * |
| 31 | * This table is used by the cpu boot code to setup the initial tlb |
| 32 | * entries. Rather than make broad assumptions in the cpu source tree, |
| 33 | * this table lets each board set things up however they like. |
| 34 | * |
| 35 | * Pointer to the table is returned in r1 |
| 36 | */ |
| 37 | .section .bootpg,"ax" |
| 38 | .globl tlbtab |
| 39 | |
| 40 | tlbtab: |
| 41 | tlbtab_start |
| 42 | |
| 43 | /* |
| 44 | * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the |
| 45 | * speed up boot process. It is patched after relocation to enable SA_I |
| 46 | */ |
| 47 | tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G ) |
| 48 | |
| 49 | #ifdef CFG_INIT_RAM_DCACHE |
| 50 | /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ |
| 51 | tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) |
| 52 | #endif |
| 53 | |
| 54 | /* TLB-entry for PCI Memory */ |
| 55 | tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I ) |
| 56 | tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I ) |
| 57 | tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I ) |
| 58 | tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) |
| 59 | |
| 60 | /* TLB-entry for PCI IO */ |
| 61 | tlbentry( CFG_PCI_IOBASE, SZ_64K, CFG_PCI_IOBASE, 1, AC_R|AC_W|SA_G|SA_I ) |
| 62 | |
| 63 | /* TLB-entries for EBC: CPLD, DUMEM, DUIO */ |
| 64 | tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) |
| 65 | tlbentry( CFG_DUMEM_BASE, SZ_1M, CFG_DUMEM_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) |
| 66 | tlbentry( CFG_DUIO_BASE, SZ_64K, CFG_DUIO_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) |
| 67 | |
| 68 | /* TLB-entry for NAND */ |
| 69 | tlbentry( CFG_NAND0_ADDR, SZ_1K, CFG_NAND0_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) |
| 70 | tlbentry( CFG_NAND1_ADDR, SZ_1K, CFG_NAND1_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) |
| 71 | |
| 72 | /* TLB-entry for Internal Registers & OCM */ |
| 73 | tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I ) |
| 74 | |
| 75 | /* TLB-entry PCI registers */ |
| 76 | tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) |
| 77 | |
| 78 | /* TLB-entry for peripherals */ |
| 79 | tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) |
| 80 | |
| 81 | tlbtab_end |