blob: 2e651df3b79df55ae3b2f3905f1b2d2e3a1c87bd [file] [log] [blame]
Stefan Roese8a316c92005-08-01 16:49:12 +02001/*
Stefan Roesea471db02007-06-01 15:19:29 +02002 * (C) Copyright 2005-2007
Stefan Roese8a316c92005-08-01 16:49:12 +02003 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
Wolfgang Denkf901a832005-08-06 01:42:58 +020015 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
Stefan Roese8a316c92005-08-01 16:49:12 +020016 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <common.h>
25#include <asm/processor.h>
Stefan Roese0d974d52007-03-24 15:57:09 +010026#include <asm/gpio.h>
Stefan Roese8a316c92005-08-01 16:49:12 +020027#include <spd_sdram.h>
Stefan Roese17f50f222005-08-04 17:09:16 +020028#include <ppc440.h>
29#include "bamboo.h"
30
31void ext_bus_cntlr_init(void);
32void configure_ppc440ep_pins(void);
Stefan Roesec57c7982005-08-11 17:56:56 +020033int is_nand_selected(void);
Stefan Roese17f50f222005-08-04 17:09:16 +020034
Stefan Roesefd49bf02005-11-15 16:04:58 +010035unsigned char cfg_simulate_spd_eeprom[128];
36
Stefan Roese17f50f222005-08-04 17:09:16 +020037gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX];
38#if 0
Wolfgang Denkf901a832005-08-06 01:42:58 +020039{ /* GPIO Alternate1 Alternate2 Alternate3 */
40 {
41 /* GPIO Core 0 */
42 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_0 -> EBC_ADDR(7) DMA_REQ(2) */
43 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_1 -> EBC_ADDR(6) DMA_ACK(2) */
44 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_2 -> EBC_ADDR(5) DMA_EOT/TC(2) */
45 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_3 -> EBC_ADDR(4) DMA_REQ(3) */
46 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_4 -> EBC_ADDR(3) DMA_ACK(3) */
47 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_5 ................. */
48 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_6 -> EBC_CS_N(1) */
49 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_7 -> EBC_CS_N(2) */
50 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_8 -> EBC_CS_N(3) */
51 { GPIO0_BASE, GPIO_DIS, GPIO_ALT1 }, /* GPIO0_9 -> EBC_CS_N(4) */
52 { GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO0_10 -> EBC_CS_N(5) */
53 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_11 -> EBC_BUS_ERR */
54 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_12 -> ZII_p0Rxd(0) */
55 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_13 -> ZII_p0Rxd(1) */
56 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_14 -> ZII_p0Rxd(2) */
57 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_15 -> ZII_p0Rxd(3) */
58 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_16 -> ZII_p0Txd(0) */
59 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_17 -> ZII_p0Txd(1) */
60 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_18 -> ZII_p0Txd(2) */
61 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_19 -> ZII_p0Txd(3) */
62 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_20 -> ZII_p0Rx_er */
63 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_21 -> ZII_p0Rx_dv */
64 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_22 -> ZII_p0RxCrs */
65 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_23 -> ZII_p0Tx_er */
66 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_24 -> ZII_p0Tx_en */
67 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_25 -> ZII_p0Col */
68 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_26 -> USB2D_RXVALID */
69 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_27 -> EXT_EBC_REQ USB2D_RXERROR */
70 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_28 -> USB2D_TXVALID */
71 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_29 -> EBC_EXT_HDLA USB2D_PAD_SUSPNDM */
72 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_30 -> EBC_EXT_ACK USB2D_XCVRSELECT */
73 { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_31 -> EBC_EXR_BUSREQ USB2D_TERMSELECT */
74 },
75 {
76 /* GPIO Core 1 */
77 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_0 -> USB2D_OPMODE0 */
78 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_1 -> USB2D_OPMODE1 */
79 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_2 -> UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT */
80 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_3 -> UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN */
81 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_4 -> UART0_8PIN_CTS_N UART3_SIN */
82 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_5 -> UART0_RTS_N */
83 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_6 -> UART0_DTR_N UART1_SOUT */
84 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_7 -> UART0_RI_N UART1_SIN */
85 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_8 -> UIC_IRQ(0) */
86 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_9 -> UIC_IRQ(1) */
87 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_10 -> UIC_IRQ(2) */
88 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_11 -> UIC_IRQ(3) */
89 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_12 -> UIC_IRQ(4) DMA_ACK(1) */
90 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_13 -> UIC_IRQ(6) DMA_EOT/TC(1) */
91 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_14 -> UIC_IRQ(7) DMA_REQ(0) */
92 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_15 -> UIC_IRQ(8) DMA_ACK(0) */
93 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_16 -> UIC_IRQ(9) DMA_EOT/TC(0) */
94 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_17 -> - */
95 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_18 -> | */
96 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_19 -> | */
97 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_20 -> | */
98 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_21 -> | */
99 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_22 -> | */
100 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_23 -> \ Can be unselected thru TraceSelect Bit */
101 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_24 -> / in PowerPC440EP Chip */
102 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_25 -> | */
103 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_26 -> | */
104 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_27 -> | */
105 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_28 -> | */
106 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_29 -> | */
107 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_30 -> | */
108 { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_31 -> - */
109 }
Stefan Roese17f50f222005-08-04 17:09:16 +0200110};
111#endif
112
113/*----------------------------------------------------------------------------+
114 | EBC Devices Characteristics
Wolfgang Denkf901a832005-08-06 01:42:58 +0200115 | Peripheral Bank Access Parameters - EBC0_BnAP
116 | Peripheral Bank Configuration Register - EBC0_BnCR
Stefan Roese17f50f222005-08-04 17:09:16 +0200117 +----------------------------------------------------------------------------*/
118/* Small Flash */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200119#define EBC0_BNAP_SMALL_FLASH \
120 EBC0_BNAP_BME_DISABLED | \
121 EBC0_BNAP_TWT_ENCODE(6) | \
122 EBC0_BNAP_CSN_ENCODE(0) | \
123 EBC0_BNAP_OEN_ENCODE(1) | \
124 EBC0_BNAP_WBN_ENCODE(1) | \
125 EBC0_BNAP_WBF_ENCODE(3) | \
126 EBC0_BNAP_TH_ENCODE(1) | \
127 EBC0_BNAP_RE_ENABLED | \
128 EBC0_BNAP_SOR_DELAYED | \
129 EBC0_BNAP_BEM_WRITEONLY | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200130 EBC0_BNAP_PEN_DISABLED
131
Wolfgang Denkf901a832005-08-06 01:42:58 +0200132#define EBC0_BNCR_SMALL_FLASH_CS0 \
133 EBC0_BNCR_BAS_ENCODE(0xFFF00000) | \
134 EBC0_BNCR_BS_1MB | \
135 EBC0_BNCR_BU_RW | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200136 EBC0_BNCR_BW_8BIT
137
Wolfgang Denkf901a832005-08-06 01:42:58 +0200138#define EBC0_BNCR_SMALL_FLASH_CS4 \
Stefan Roesec57c7982005-08-11 17:56:56 +0200139 EBC0_BNCR_BAS_ENCODE(0x87F00000) | \
140 EBC0_BNCR_BS_1MB | \
Wolfgang Denkf901a832005-08-06 01:42:58 +0200141 EBC0_BNCR_BU_RW | \
Stefan Roesec57c7982005-08-11 17:56:56 +0200142 EBC0_BNCR_BW_8BIT
Stefan Roese17f50f222005-08-04 17:09:16 +0200143
144/* Large Flash or SRAM */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200145#define EBC0_BNAP_LARGE_FLASH_OR_SRAM \
146 EBC0_BNAP_BME_DISABLED | \
147 EBC0_BNAP_TWT_ENCODE(8) | \
148 EBC0_BNAP_CSN_ENCODE(0) | \
149 EBC0_BNAP_OEN_ENCODE(1) | \
150 EBC0_BNAP_WBN_ENCODE(1) | \
151 EBC0_BNAP_WBF_ENCODE(1) | \
152 EBC0_BNAP_TH_ENCODE(2) | \
153 EBC0_BNAP_SOR_DELAYED | \
154 EBC0_BNAP_BEM_RW | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200155 EBC0_BNAP_PEN_DISABLED
156
Wolfgang Denkf901a832005-08-06 01:42:58 +0200157#define EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0 \
158 EBC0_BNCR_BAS_ENCODE(0xFF800000) | \
159 EBC0_BNCR_BS_8MB | \
160 EBC0_BNCR_BU_RW | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200161 EBC0_BNCR_BW_16BIT
162
163
Wolfgang Denkf901a832005-08-06 01:42:58 +0200164#define EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4 \
165 EBC0_BNCR_BAS_ENCODE(0x87800000) | \
166 EBC0_BNCR_BS_8MB | \
167 EBC0_BNCR_BU_RW | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200168 EBC0_BNCR_BW_16BIT
169
170/* NVRAM - FPGA */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200171#define EBC0_BNAP_NVRAM_FPGA \
172 EBC0_BNAP_BME_DISABLED | \
173 EBC0_BNAP_TWT_ENCODE(9) | \
174 EBC0_BNAP_CSN_ENCODE(0) | \
175 EBC0_BNAP_OEN_ENCODE(1) | \
176 EBC0_BNAP_WBN_ENCODE(1) | \
177 EBC0_BNAP_WBF_ENCODE(0) | \
178 EBC0_BNAP_TH_ENCODE(2) | \
179 EBC0_BNAP_RE_ENABLED | \
180 EBC0_BNAP_SOR_DELAYED | \
181 EBC0_BNAP_BEM_WRITEONLY | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200182 EBC0_BNAP_PEN_DISABLED
183
Wolfgang Denkf901a832005-08-06 01:42:58 +0200184#define EBC0_BNCR_NVRAM_FPGA_CS5 \
185 EBC0_BNCR_BAS_ENCODE(0x80000000) | \
186 EBC0_BNCR_BS_1MB | \
187 EBC0_BNCR_BU_RW | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200188 EBC0_BNCR_BW_8BIT
189
190/* Nand Flash */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200191#define EBC0_BNAP_NAND_FLASH \
192 EBC0_BNAP_BME_DISABLED | \
193 EBC0_BNAP_TWT_ENCODE(3) | \
194 EBC0_BNAP_CSN_ENCODE(0) | \
195 EBC0_BNAP_OEN_ENCODE(0) | \
196 EBC0_BNAP_WBN_ENCODE(0) | \
197 EBC0_BNAP_WBF_ENCODE(0) | \
198 EBC0_BNAP_TH_ENCODE(1) | \
199 EBC0_BNAP_RE_ENABLED | \
200 EBC0_BNAP_SOR_NOT_DELAYED | \
201 EBC0_BNAP_BEM_RW | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200202 EBC0_BNAP_PEN_DISABLED
203
204
Wolfgang Denkf901a832005-08-06 01:42:58 +0200205#define EBC0_BNCR_NAND_FLASH_CS0 0xB8400000
Stefan Roese17f50f222005-08-04 17:09:16 +0200206
207/* NAND0 */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200208#define EBC0_BNCR_NAND_FLASH_CS1 \
209 EBC0_BNCR_BAS_ENCODE(0x90000000) | \
210 EBC0_BNCR_BS_1MB | \
211 EBC0_BNCR_BU_RW | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200212 EBC0_BNCR_BW_32BIT
213/* NAND1 - Bank2 */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200214#define EBC0_BNCR_NAND_FLASH_CS2 \
215 EBC0_BNCR_BAS_ENCODE(0x94000000) | \
216 EBC0_BNCR_BS_1MB | \
217 EBC0_BNCR_BU_RW | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200218 EBC0_BNCR_BW_32BIT
219
220/* NAND1 - Bank3 */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200221#define EBC0_BNCR_NAND_FLASH_CS3 \
222 EBC0_BNCR_BAS_ENCODE(0x94000000) | \
223 EBC0_BNCR_BS_1MB | \
224 EBC0_BNCR_BU_RW | \
Stefan Roese17f50f222005-08-04 17:09:16 +0200225 EBC0_BNCR_BW_32BIT
Stefan Roese8a316c92005-08-01 16:49:12 +0200226
227int board_early_init_f(void)
228{
Stefan Roese17f50f222005-08-04 17:09:16 +0200229 ext_bus_cntlr_init();
Stefan Roese8a316c92005-08-01 16:49:12 +0200230
231 /*--------------------------------------------------------------------
232 * Setup the interrupt controller polarities, triggers, etc.
233 *-------------------------------------------------------------------*/
234 mtdcr(uic0sr, 0xffffffff); /* clear all */
235 mtdcr(uic0er, 0x00000000); /* disable all */
236 mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
237 mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
238 mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
239 mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
240 mtdcr(uic0sr, 0xffffffff); /* clear all */
241
242 mtdcr(uic1sr, 0xffffffff); /* clear all */
243 mtdcr(uic1er, 0x00000000); /* disable all */
244 mtdcr(uic1cr, 0x00000000); /* all non-critical */
245 mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
246 mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
247 mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
248 mtdcr(uic1sr, 0xffffffff); /* clear all */
249
250 /*--------------------------------------------------------------------
251 * Setup the GPIO pins
252 *-------------------------------------------------------------------*/
Stefan Roese17f50f222005-08-04 17:09:16 +0200253 out32(GPIO0_OSRL, 0x00000400);
254 out32(GPIO0_OSRH, 0x00000000);
255 out32(GPIO0_TSRL, 0x00000400);
256 out32(GPIO0_TSRH, 0x00000000);
257 out32(GPIO0_ISR1L, 0x00000000);
258 out32(GPIO0_ISR1H, 0x00000000);
259 out32(GPIO0_ISR2L, 0x00000000);
260 out32(GPIO0_ISR2H, 0x00000000);
261 out32(GPIO0_ISR3L, 0x00000000);
262 out32(GPIO0_ISR3H, 0x00000000);
Stefan Roese8a316c92005-08-01 16:49:12 +0200263
Stefan Roese17f50f222005-08-04 17:09:16 +0200264 out32(GPIO1_OSRL, 0x0C380000);
265 out32(GPIO1_OSRH, 0x00000000);
266 out32(GPIO1_TSRL, 0x0C380000);
267 out32(GPIO1_TSRH, 0x00000000);
268 out32(GPIO1_ISR1L, 0x0FC30000);
269 out32(GPIO1_ISR1H, 0x00000000);
270 out32(GPIO1_ISR2L, 0x0C010000);
271 out32(GPIO1_ISR2H, 0x00000000);
272 out32(GPIO1_ISR3L, 0x01400000);
273 out32(GPIO1_ISR3H, 0x00000000);
Stefan Roese8a316c92005-08-01 16:49:12 +0200274
Stefan Roese17f50f222005-08-04 17:09:16 +0200275 configure_ppc440ep_pins();
Stefan Roese8a316c92005-08-01 16:49:12 +0200276
277 return 0;
278}
279
280int checkboard(void)
281{
Stefan Roese3d9569b2005-11-27 19:36:26 +0100282 char *s = getenv("serial#");
Stefan Roese8a316c92005-08-01 16:49:12 +0200283
284 printf("Board: Bamboo - AMCC PPC440EP Evaluation Board");
285 if (s != NULL) {
286 puts(", serial# ");
287 puts(s);
288 }
289 putc('\n');
290
Stefan Roese8a316c92005-08-01 16:49:12 +0200291 return (0);
292}
293
Stefan Roesea471db02007-06-01 15:19:29 +0200294#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL))
Stefan Roese8a316c92005-08-01 16:49:12 +0200295/*************************************************************************
Stefan Roese8a316c92005-08-01 16:49:12 +0200296 *
Stefan Roesefd49bf02005-11-15 16:04:58 +0100297 * init_spd_array -- Bamboo has one bank onboard sdram (plus DIMM)
Stefan Roese17f50f222005-08-04 17:09:16 +0200298 *
299 * Fixed memory is composed of :
Wolfgang Denkf901a832005-08-06 01:42:58 +0200300 * MT46V16M16TG-75 from Micron (x 2), 256Mb, 16 M x16, DDR266,
301 * 13 row add bits, 10 column add bits (but 12 row used only).
302 * ECC device: MT46V16M8TG-75 from Micron (x 1), 128Mb, x8, DDR266,
303 * 12 row add bits, 10 column add bits.
304 * Prepare a subset (only the used ones) of SPD data
Stefan Roese17f50f222005-08-04 17:09:16 +0200305 *
Wolfgang Denkf901a832005-08-06 01:42:58 +0200306 * Note : if the ECC is enabled (SDRAM_ECC_ENABLE) the size of
307 * the corresponding bank is divided by 2 due to number of Row addresses
308 * 12 in the ECC module
Stefan Roese17f50f222005-08-04 17:09:16 +0200309 *
Wolfgang Denkf901a832005-08-06 01:42:58 +0200310 * Assumes: 64 MB, ECC, non-registered
311 * PLB @ 133 MHz
Stefan Roese8a316c92005-08-01 16:49:12 +0200312 *
313 ************************************************************************/
Stefan Roesefd49bf02005-11-15 16:04:58 +0100314static void init_spd_array(void)
Stefan Roese8a316c92005-08-01 16:49:12 +0200315{
Stefan Roesefd49bf02005-11-15 16:04:58 +0100316 cfg_simulate_spd_eeprom[8] = 0x04; /* 2.5 Volt */
317 cfg_simulate_spd_eeprom[2] = 0x07; /* DDR ram */
Stefan Roese8a316c92005-08-01 16:49:12 +0200318
Stefan Roesefd49bf02005-11-15 16:04:58 +0100319#ifdef CONFIG_DDR_ECC
320 cfg_simulate_spd_eeprom[11] = 0x02; /* ECC ON : 02 OFF : 00 */
321 cfg_simulate_spd_eeprom[31] = 0x08; /* bankSizeID: 32MB */
322 cfg_simulate_spd_eeprom[3] = 0x0C; /* num Row Addr: 12 */
323#else
324 cfg_simulate_spd_eeprom[11] = 0x00; /* ECC ON : 02 OFF : 00 */
325 cfg_simulate_spd_eeprom[31] = 0x10; /* bankSizeID: 64MB */
326 cfg_simulate_spd_eeprom[3] = 0x0D; /* num Row Addr: 13 */
327#endif
328
329 cfg_simulate_spd_eeprom[4] = 0x09; /* numColAddr: 9 */
330 cfg_simulate_spd_eeprom[5] = 0x01; /* numBanks: 1 */
331 cfg_simulate_spd_eeprom[0] = 0x80; /* number of SPD bytes used: 128 */
332 cfg_simulate_spd_eeprom[1] = 0x08; /* total number bytes in SPD device = 256 */
333 cfg_simulate_spd_eeprom[21] = 0x00; /* not registered: 0 registered : 0x02*/
334 cfg_simulate_spd_eeprom[6] = 0x20; /* Module data width: 32 bits */
335 cfg_simulate_spd_eeprom[7] = 0x00; /* Module data width continued: +0 */
336 cfg_simulate_spd_eeprom[15] = 0x01; /* wcsbc = 1 */
337 cfg_simulate_spd_eeprom[27] = 0x50; /* tRpNs = 20 ns */
338 cfg_simulate_spd_eeprom[29] = 0x50; /* tRcdNs = 20 ns */
339
340 cfg_simulate_spd_eeprom[30] = 45; /* tRasNs */
341
342 cfg_simulate_spd_eeprom[18] = 0x0C; /* casBit (2,2.5) */
343
344 cfg_simulate_spd_eeprom[9] = 0x75; /* SDRAM Cycle Time (cas latency 2.5) = 7.5 ns */
345 cfg_simulate_spd_eeprom[23] = 0xA0; /* SDRAM Cycle Time (cas latency 2) = 10 ns */
346 cfg_simulate_spd_eeprom[25] = 0x00; /* SDRAM Cycle Time (cas latency 1.5) = N.A */
347 cfg_simulate_spd_eeprom[12] = 0x82; /* refresh Rate Type: Normal (15.625us) + Self refresh */
Stefan Roese8a316c92005-08-01 16:49:12 +0200348}
Stefan Roesea471db02007-06-01 15:19:29 +0200349#endif
Stefan Roese8a316c92005-08-01 16:49:12 +0200350
Stefan Roese17f50f222005-08-04 17:09:16 +0200351long int initdram (int board_type)
Stefan Roese8a316c92005-08-01 16:49:12 +0200352{
Stefan Roesea471db02007-06-01 15:19:29 +0200353#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL))
354 long dram_size;
Stefan Roese17f50f222005-08-04 17:09:16 +0200355
356 /*
Stefan Roesefd49bf02005-11-15 16:04:58 +0100357 * First write simulated values in eeprom array for onboard bank 0
Stefan Roese17f50f222005-08-04 17:09:16 +0200358 */
Stefan Roesefd49bf02005-11-15 16:04:58 +0100359 init_spd_array();
360
Marian Balakowiczd19206b2006-07-04 01:27:46 +0200361 dram_size = spd_sdram();
Stefan Roese17f50f222005-08-04 17:09:16 +0200362
363 return dram_size;
Stefan Roesea471db02007-06-01 15:19:29 +0200364#else
365 return CFG_MBYTES_SDRAM << 20;
366#endif
Stefan Roese8a316c92005-08-01 16:49:12 +0200367}
368
369#if defined(CFG_DRAM_TEST)
370int testdram(void)
371{
372 unsigned long *mem = (unsigned long *)0;
373 const unsigned long kend = (1024 / sizeof(unsigned long));
374 unsigned long k, n;
375
376 mtmsr(0);
377
378 for (k = 0; k < CFG_KBYTES_SDRAM;
379 ++k, mem += (1024 / sizeof(unsigned long))) {
380 if ((k & 1023) == 0) {
381 printf("%3d MB\r", k / 1024);
382 }
383
384 memset(mem, 0xaaaaaaaa, 1024);
385 for (n = 0; n < kend; ++n) {
386 if (mem[n] != 0xaaaaaaaa) {
387 printf("SDRAM test fails at: %08x\n",
388 (uint) & mem[n]);
389 return 1;
390 }
391 }
392
393 memset(mem, 0x55555555, 1024);
394 for (n = 0; n < kend; ++n) {
395 if (mem[n] != 0x55555555) {
396 printf("SDRAM test fails at: %08x\n",
397 (uint) & mem[n]);
398 return 1;
399 }
400 }
401 }
402 printf("SDRAM test passes\n");
403 return 0;
404}
405#endif
406
407/*************************************************************************
408 * pci_pre_init
409 *
410 * This routine is called just prior to registering the hose and gives
411 * the board the opportunity to check things. Returning a value of zero
412 * indicates that things are bad & PCI initialization should be aborted.
413 *
414 * Different boards may wish to customize the pci controller structure
415 * (add regions, override default access routines, etc) or perform
416 * certain pre-initialization actions.
417 *
418 ************************************************************************/
419#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
420int pci_pre_init(struct pci_controller *hose)
421{
Stefan Roese8a316c92005-08-01 16:49:12 +0200422 unsigned long addr;
423
Stefan Roese8a316c92005-08-01 16:49:12 +0200424 /*-------------------------------------------------------------------------+
425 | Set priority for all PLB3 devices to 0.
426 | Set PLB3 arbiter to fair mode.
427 +-------------------------------------------------------------------------*/
428 mfsdr(sdr_amp1, addr);
429 mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
430 addr = mfdcr(plb3_acr);
431 mtdcr(plb3_acr, addr | 0x80000000);
432
433 /*-------------------------------------------------------------------------+
434 | Set priority for all PLB4 devices to 0.
435 +-------------------------------------------------------------------------*/
436 mfsdr(sdr_amp0, addr);
437 mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
438 addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
439 mtdcr(plb4_acr, addr);
440
441 /*-------------------------------------------------------------------------+
442 | Set Nebula PLB4 arbiter to fair mode.
443 +-------------------------------------------------------------------------*/
444 /* Segment0 */
445 addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
446 addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
447 addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
448 addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
449 mtdcr(plb0_acr, addr);
450
451 /* Segment1 */
452 addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
453 addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
454 addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
455 addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
456 mtdcr(plb1_acr, addr);
457
458 return 1;
459}
460#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
461
462/*************************************************************************
463 * pci_target_init
464 *
465 * The bootstrap configuration provides default settings for the pci
466 * inbound map (PIM). But the bootstrap config choices are limited and
467 * may not be sufficient for a given board.
468 *
469 ************************************************************************/
470#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
471void pci_target_init(struct pci_controller *hose)
472{
473 /*--------------------------------------------------------------------------+
474 * Set up Direct MMIO registers
475 *--------------------------------------------------------------------------*/
476 /*--------------------------------------------------------------------------+
477 | PowerPC440 EP PCI Master configuration.
478 | Map one 1Gig range of PLB/processor addresses to PCI memory space.
479 | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
480 | Use byte reversed out routines to handle endianess.
481 | Make this region non-prefetchable.
482 +--------------------------------------------------------------------------*/
483 out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
484 out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
485 out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
486 out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
487 out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
488
489 out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200490 out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
Stefan Roese8a316c92005-08-01 16:49:12 +0200491 out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
492 out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
493 out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
494
495 out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
496 out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
497 out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
498 out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
499
500 /*--------------------------------------------------------------------------+
501 * Set up Configuration registers
502 *--------------------------------------------------------------------------*/
503
504 /* Program the board's subsystem id/vendor id */
505 pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
506 CFG_PCI_SUBSYS_VENDORID);
507 pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
508
509 /* Configure command register as bus master */
510 pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
511
512 /* 240nS PCI clock */
513 pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
514
515 /* No error reporting */
516 pci_write_config_word(0, PCI_ERREN, 0);
517
518 pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
519
520}
521#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
522
523/*************************************************************************
524 * pci_master_init
525 *
526 ************************************************************************/
527#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
528void pci_master_init(struct pci_controller *hose)
529{
530 unsigned short temp_short;
531
532 /*--------------------------------------------------------------------------+
533 | Write the PowerPC440 EP PCI Configuration regs.
534 | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
535 | Enable PowerPC440 EP to act as a PCI memory target (PTM).
536 +--------------------------------------------------------------------------*/
537 pci_read_config_word(0, PCI_COMMAND, &temp_short);
538 pci_write_config_word(0, PCI_COMMAND,
539 temp_short | PCI_COMMAND_MASTER |
540 PCI_COMMAND_MEMORY);
541}
542#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
543
544/*************************************************************************
545 * is_pci_host
546 *
547 * This routine is called to determine if a pci scan should be
548 * performed. With various hardware environments (especially cPCI and
549 * PPMC) it's insufficient to depend on the state of the arbiter enable
550 * bit in the strap register, or generic host/adapter assumptions.
551 *
552 * Rather than hard-code a bad assumption in the general 440 code, the
553 * 440 pci code requires the board to decide at runtime.
554 *
555 * Return 0 for adapter mode, non-zero for host (monarch) mode.
556 *
557 *
558 ************************************************************************/
559#if defined(CONFIG_PCI)
560int is_pci_host(struct pci_controller *hose)
561{
562 /* Bamboo is always configured as host. */
563 return (1);
564}
565#endif /* defined(CONFIG_PCI) */
566
Stefan Roese17f50f222005-08-04 17:09:16 +0200567/*----------------------------------------------------------------------------+
568 | is_powerpc440ep_pass1.
569 +----------------------------------------------------------------------------*/
570int is_powerpc440ep_pass1(void)
571{
572 unsigned long pvr;
573
574 pvr = get_pvr();
575
576 if (pvr == PVR_POWERPC_440EP_PASS1)
577 return TRUE;
578 else if (pvr == PVR_POWERPC_440EP_PASS2)
579 return FALSE;
580 else {
581 printf("brdutil error 3\n");
582 for (;;)
583 ;
584 }
585
586 return(FALSE);
587}
588
589/*----------------------------------------------------------------------------+
590 | is_nand_selected.
591 +----------------------------------------------------------------------------*/
592int is_nand_selected(void)
593{
Stefan Roesec57c7982005-08-11 17:56:56 +0200594#ifdef CONFIG_BAMBOO_NAND
595 return TRUE;
596#else
597 return FALSE;
598#endif
Stefan Roese17f50f222005-08-04 17:09:16 +0200599}
600
601/*----------------------------------------------------------------------------+
602 | config_on_ebc_cs4_is_small_flash => from EPLD
603 +----------------------------------------------------------------------------*/
604unsigned char config_on_ebc_cs4_is_small_flash(void)
605{
606 /* Not implemented yet => returns constant value */
607 return TRUE;
608}
609
610/*----------------------------------------------------------------------------+
611 | Ext_bus_cntlr_init.
612 | Initialize the external bus controller
613 +----------------------------------------------------------------------------*/
614void ext_bus_cntlr_init(void)
615{
616 unsigned long sdr0_pstrp0, sdr0_sdstp1;
617 unsigned long bootstrap_settings, boot_selection, ebc_boot_size;
Wolfgang Denkf901a832005-08-06 01:42:58 +0200618 int computed_boot_device = BOOT_DEVICE_UNKNOWN;
Stefan Roese17f50f222005-08-04 17:09:16 +0200619 unsigned long ebc0_cs0_bnap_value = 0, ebc0_cs0_bncr_value = 0;
620 unsigned long ebc0_cs1_bnap_value = 0, ebc0_cs1_bncr_value = 0;
621 unsigned long ebc0_cs2_bnap_value = 0, ebc0_cs2_bncr_value = 0;
622 unsigned long ebc0_cs3_bnap_value = 0, ebc0_cs3_bncr_value = 0;
623 unsigned long ebc0_cs4_bnap_value = 0, ebc0_cs4_bncr_value = 0;
624
625
626 /*-------------------------------------------------------------------------+
627 |
628 | PART 1 : Initialize EBC Bank 5
629 | ==============================
630 | Bank5 is always associated to the NVRAM/EPLD.
631 | It has to be initialized prior to other banks settings computation since
632 | some board registers values may be needed
633 |
634 +-------------------------------------------------------------------------*/
635 /* NVRAM - FPGA */
636 mtebc(pb5ap, EBC0_BNAP_NVRAM_FPGA);
637 mtebc(pb5cr, EBC0_BNCR_NVRAM_FPGA_CS5);
638
639 /*-------------------------------------------------------------------------+
640 |
641 | PART 2 : Determine which boot device was selected
642 | =========================================
643 |
644 | Read Pin Strap Register in PPC440EP
645 | In case of boot from IIC, read Serial Device Strap Register1
646 |
647 | Result can either be :
648 | - Boot from EBC 8bits => SMALL FLASH
649 | - Boot from EBC 16bits => Large Flash or SRAM
650 | - Boot from NAND Flash
651 | - Boot from PCI
652 |
653 +-------------------------------------------------------------------------*/
654 /* Read Pin Strap Register in PPC440EP */
655 mfsdr(sdr_pstrp0, sdr0_pstrp0);
656 bootstrap_settings = sdr0_pstrp0 & SDR0_PSTRP0_BOOTSTRAP_MASK;
657
658 /*-------------------------------------------------------------------------+
659 | PPC440EP Pass1
660 +-------------------------------------------------------------------------*/
661 if (is_powerpc440ep_pass1() == TRUE) {
662 switch(bootstrap_settings) {
663 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
664 /* Default Strap Settings 0 : CPU 400 - PLB 133 - Boot EBC 8 bit 33MHz */
665 /* Boot from Small Flash */
666 computed_boot_device = BOOT_FROM_SMALL_FLASH;
667 break;
668 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1:
669 /* Default Strap Settings 1 : CPU 533 - PLB 133 - Boot PCI 66MHz */
670 /* Boot from PCI */
671 computed_boot_device = BOOT_FROM_PCI;
672 break;
673
674 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2:
675 /* Default Strap Settings 2 : CPU 500 - PLB 100 - Boot NDFC16 66MHz */
676 /* Boot from Nand Flash */
677 computed_boot_device = BOOT_FROM_NAND_FLASH0;
678 break;
679
680 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS3:
681 /* Default Strap Settings 3 : CPU 333 - PLB 133 - Boot EBC 8 bit 66MHz */
682 /* Boot from Small Flash */
683 computed_boot_device = BOOT_FROM_SMALL_FLASH;
684 break;
685
686 case SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN:
687 case SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN:
688 /* Boot Settings in IIC EEprom address 0xA8 or 0xA4 */
689 /* Read Serial Device Strap Register1 in PPC440EP */
690 mfsdr(sdr_sdstp1, sdr0_sdstp1);
Wolfgang Denkf901a832005-08-06 01:42:58 +0200691 boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_BOOT_SEL_MASK;
692 ebc_boot_size = sdr0_sdstp1 & SDR0_SDSTP1_EBC_ROM_BS_MASK;
Stefan Roese17f50f222005-08-04 17:09:16 +0200693
694 switch(boot_selection) {
695 case SDR0_SDSTP1_BOOT_SEL_EBC:
696 switch(ebc_boot_size) {
697 case SDR0_SDSTP1_EBC_ROM_BS_16BIT:
698 computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM;
699 break;
700 case SDR0_SDSTP1_EBC_ROM_BS_8BIT:
701 computed_boot_device = BOOT_FROM_SMALL_FLASH;
702 break;
703 }
704 break;
705
706 case SDR0_SDSTP1_BOOT_SEL_PCI:
707 computed_boot_device = BOOT_FROM_PCI;
708 break;
709
710 case SDR0_SDSTP1_BOOT_SEL_NDFC:
711 computed_boot_device = BOOT_FROM_NAND_FLASH0;
712 break;
713 }
714 break;
715 }
716 }
717
718 /*-------------------------------------------------------------------------+
719 | PPC440EP Pass2
720 +-------------------------------------------------------------------------*/
721 else {
722 switch(bootstrap_settings) {
723 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
724 /* Default Strap Settings 0 : CPU 400 - PLB 133 - Boot EBC 8 bit 33MHz */
725 /* Boot from Small Flash */
726 computed_boot_device = BOOT_FROM_SMALL_FLASH;
727 break;
728 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1:
729 /* Default Strap Settings 1 : CPU 333 - PLB 133 - Boot PCI 66MHz */
730 /* Boot from PCI */
731 computed_boot_device = BOOT_FROM_PCI;
732 break;
733
734 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2:
735 /* Default Strap Settings 2 : CPU 400 - PLB 100 - Boot NDFC16 33MHz */
736 /* Boot from Nand Flash */
737 computed_boot_device = BOOT_FROM_NAND_FLASH0;
738 break;
739
740 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS3:
741 /* Default Strap Settings 3 : CPU 400 - PLB 100 - Boot EBC 16 bit 33MHz */
742 /* Boot from Large Flash or SRAM */
743 computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM;
744 break;
745
746 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS4:
747 /* Default Strap Settings 4 : CPU 333 - PLB 133 - Boot EBC 16 bit 66MHz */
748 /* Boot from Large Flash or SRAM */
749 computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM;
750 break;
751
752 case SDR0_PSTRP0_BOOTSTRAP_SETTINGS6:
753 /* Default Strap Settings 6 : CPU 400 - PLB 100 - Boot PCI 33MHz */
754 /* Boot from PCI */
755 computed_boot_device = BOOT_FROM_PCI;
756 break;
757
758 case SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN:
759 case SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN:
760 /* Default Strap Settings 5-7 */
761 /* Boot Settings in IIC EEprom address 0xA8 or 0xA4 */
762 /* Read Serial Device Strap Register1 in PPC440EP */
763 mfsdr(sdr_sdstp1, sdr0_sdstp1);
Wolfgang Denkf901a832005-08-06 01:42:58 +0200764 boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_BOOT_SEL_MASK;
765 ebc_boot_size = sdr0_sdstp1 & SDR0_SDSTP1_EBC_ROM_BS_MASK;
Stefan Roese17f50f222005-08-04 17:09:16 +0200766
767 switch(boot_selection) {
768 case SDR0_SDSTP1_BOOT_SEL_EBC:
769 switch(ebc_boot_size) {
770 case SDR0_SDSTP1_EBC_ROM_BS_16BIT:
771 computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM;
772 break;
773 case SDR0_SDSTP1_EBC_ROM_BS_8BIT:
774 computed_boot_device = BOOT_FROM_SMALL_FLASH;
775 break;
776 }
777 break;
778
779 case SDR0_SDSTP1_BOOT_SEL_PCI:
780 computed_boot_device = BOOT_FROM_PCI;
781 break;
782
783 case SDR0_SDSTP1_BOOT_SEL_NDFC:
784 computed_boot_device = BOOT_FROM_NAND_FLASH0;
785 break;
786 }
787 break;
788 }
789 }
790
791 /*-------------------------------------------------------------------------+
792 |
793 | PART 3 : Compute EBC settings depending on selected boot device
794 | ====== ======================================================
795 |
796 | Resulting EBC init will be among following configurations :
797 |
798 | - Boot from EBC 8bits => boot from SMALL FLASH selected
Wolfgang Denkf901a832005-08-06 01:42:58 +0200799 | EBC-CS0 = Small Flash
800 | EBC-CS1,2,3 = NAND Flash or
801 | Exp.Slot depending on Soft Config
802 | EBC-CS4 = SRAM/Large Flash or
803 | Large Flash/SRAM depending on jumpers
804 | EBC-CS5 = NVRAM / EPLD
Stefan Roese17f50f222005-08-04 17:09:16 +0200805 |
806 | - Boot from EBC 16bits => boot from Large Flash or SRAM selected
Wolfgang Denkf901a832005-08-06 01:42:58 +0200807 | EBC-CS0 = SRAM/Large Flash or
808 | Large Flash/SRAM depending on jumpers
809 | EBC-CS1,2,3 = NAND Flash or
810 | Exp.Slot depending on Software Configuration
811 | EBC-CS4 = Small Flash
812 | EBC-CS5 = NVRAM / EPLD
Stefan Roese17f50f222005-08-04 17:09:16 +0200813 |
814 | - Boot from NAND Flash
Wolfgang Denkf901a832005-08-06 01:42:58 +0200815 | EBC-CS0 = NAND Flash0
816 | EBC-CS1,2,3 = NAND Flash1
817 | EBC-CS4 = SRAM/Large Flash or
818 | Large Flash/SRAM depending on jumpers
819 | EBC-CS5 = NVRAM / EPLD
Stefan Roese17f50f222005-08-04 17:09:16 +0200820 |
821 | - Boot from PCI
Wolfgang Denkf901a832005-08-06 01:42:58 +0200822 | EBC-CS0 = ...
823 | EBC-CS1,2,3 = NAND Flash or
824 | Exp.Slot depending on Software Configuration
825 | EBC-CS4 = SRAM/Large Flash or
826 | Large Flash/SRAM or
827 | Small Flash depending on jumpers
828 | EBC-CS5 = NVRAM / EPLD
Stefan Roese17f50f222005-08-04 17:09:16 +0200829 |
830 +-------------------------------------------------------------------------*/
831
832 switch(computed_boot_device) {
833 /*------------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200834 case BOOT_FROM_SMALL_FLASH:
Stefan Roese17f50f222005-08-04 17:09:16 +0200835 /*------------------------------------------------------------------------- */
836 ebc0_cs0_bnap_value = EBC0_BNAP_SMALL_FLASH;
837 ebc0_cs0_bncr_value = EBC0_BNCR_SMALL_FLASH_CS0;
838 if ((is_nand_selected()) == TRUE) {
839 /* NAND Flash */
840 ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
841 ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
Stefan Roesec57c7982005-08-11 17:56:56 +0200842 ebc0_cs2_bnap_value = EBC0_BNAP_NAND_FLASH;
843 ebc0_cs2_bncr_value = EBC0_BNCR_NAND_FLASH_CS2;
Stefan Roese17f50f222005-08-04 17:09:16 +0200844 ebc0_cs3_bnap_value = 0;
845 ebc0_cs3_bncr_value = 0;
846 } else {
847 /* Expansion Slot */
848 ebc0_cs1_bnap_value = 0;
849 ebc0_cs1_bncr_value = 0;
850 ebc0_cs2_bnap_value = 0;
851 ebc0_cs2_bncr_value = 0;
852 ebc0_cs3_bnap_value = 0;
853 ebc0_cs3_bncr_value = 0;
854 }
855 ebc0_cs4_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM;
856 ebc0_cs4_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4;
857
858 break;
859
860 /*------------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200861 case BOOT_FROM_LARGE_FLASH_OR_SRAM:
Stefan Roese17f50f222005-08-04 17:09:16 +0200862 /*------------------------------------------------------------------------- */
863 ebc0_cs0_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM;
864 ebc0_cs0_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0;
865 if ((is_nand_selected()) == TRUE) {
866 /* NAND Flash */
867 ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
868 ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
869 ebc0_cs2_bnap_value = 0;
870 ebc0_cs2_bncr_value = 0;
871 ebc0_cs3_bnap_value = 0;
872 ebc0_cs3_bncr_value = 0;
873 } else {
874 /* Expansion Slot */
875 ebc0_cs1_bnap_value = 0;
876 ebc0_cs1_bncr_value = 0;
877 ebc0_cs2_bnap_value = 0;
878 ebc0_cs2_bncr_value = 0;
879 ebc0_cs3_bnap_value = 0;
880 ebc0_cs3_bncr_value = 0;
881 }
882 ebc0_cs4_bnap_value = EBC0_BNAP_SMALL_FLASH;
883 ebc0_cs4_bncr_value = EBC0_BNCR_SMALL_FLASH_CS4;
884
885 break;
886
887 /*------------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200888 case BOOT_FROM_NAND_FLASH0:
Stefan Roese17f50f222005-08-04 17:09:16 +0200889 /*------------------------------------------------------------------------- */
Stefan Roesea471db02007-06-01 15:19:29 +0200890 ebc0_cs0_bnap_value = EBC0_BNAP_NAND_FLASH;
891 ebc0_cs0_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
Stefan Roese17f50f222005-08-04 17:09:16 +0200892
Stefan Roesea471db02007-06-01 15:19:29 +0200893 ebc0_cs1_bnap_value = 0;
894 ebc0_cs1_bncr_value = 0;
Stefan Roese17f50f222005-08-04 17:09:16 +0200895 ebc0_cs2_bnap_value = 0;
896 ebc0_cs2_bncr_value = 0;
897 ebc0_cs3_bnap_value = 0;
898 ebc0_cs3_bncr_value = 0;
899
900 /* Large Flash or SRAM */
901 ebc0_cs4_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM;
902 ebc0_cs4_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4;
903
904 break;
905
906 /*------------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200907 case BOOT_FROM_PCI:
Stefan Roese17f50f222005-08-04 17:09:16 +0200908 /*------------------------------------------------------------------------- */
909 ebc0_cs0_bnap_value = 0;
910 ebc0_cs0_bncr_value = 0;
911
912 if ((is_nand_selected()) == TRUE) {
913 /* NAND Flash */
914 ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
915 ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
916 ebc0_cs2_bnap_value = 0;
917 ebc0_cs2_bncr_value = 0;
918 ebc0_cs3_bnap_value = 0;
919 ebc0_cs3_bncr_value = 0;
920 } else {
921 /* Expansion Slot */
922 ebc0_cs1_bnap_value = 0;
923 ebc0_cs1_bncr_value = 0;
924 ebc0_cs2_bnap_value = 0;
925 ebc0_cs2_bncr_value = 0;
926 ebc0_cs3_bnap_value = 0;
927 ebc0_cs3_bncr_value = 0;
928 }
929
930 if ((config_on_ebc_cs4_is_small_flash()) == TRUE) {
931 /* Small Flash */
932 ebc0_cs4_bnap_value = EBC0_BNAP_SMALL_FLASH;
933 ebc0_cs4_bncr_value = EBC0_BNCR_SMALL_FLASH_CS4;
934 } else {
935 /* Large Flash or SRAM */
936 ebc0_cs4_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM;
937 ebc0_cs4_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4;
938 }
939
940 break;
941
942 /*------------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +0200943 case BOOT_DEVICE_UNKNOWN:
Stefan Roese17f50f222005-08-04 17:09:16 +0200944 /*------------------------------------------------------------------------- */
945 /* Error */
946 break;
947
948 }
949
950
951 /*-------------------------------------------------------------------------+
952 | Initialize EBC CONFIG
953 +-------------------------------------------------------------------------*/
954 mtdcr(ebccfga, xbcfg);
Wolfgang Denkf901a832005-08-06 01:42:58 +0200955 mtdcr(ebccfgd, EBC0_CFG_EBTC_DRIVEN |
956 EBC0_CFG_PTD_ENABLED |
957 EBC0_CFG_RTC_2048PERCLK |
958 EBC0_CFG_EMPL_LOW |
959 EBC0_CFG_EMPH_LOW |
960 EBC0_CFG_CSTC_DRIVEN |
961 EBC0_CFG_BPF_ONEDW |
962 EBC0_CFG_EMS_8BIT |
963 EBC0_CFG_PME_DISABLED |
964 EBC0_CFG_PMT_ENCODE(0) );
Stefan Roese17f50f222005-08-04 17:09:16 +0200965
966 /*-------------------------------------------------------------------------+
967 | Initialize EBC Bank 0-4
968 +-------------------------------------------------------------------------*/
969 /* EBC Bank0 */
970 mtebc(pb0ap, ebc0_cs0_bnap_value);
971 mtebc(pb0cr, ebc0_cs0_bncr_value);
972 /* EBC Bank1 */
973 mtebc(pb1ap, ebc0_cs1_bnap_value);
974 mtebc(pb1cr, ebc0_cs1_bncr_value);
975 /* EBC Bank2 */
976 mtebc(pb2ap, ebc0_cs2_bnap_value);
977 mtebc(pb2cr, ebc0_cs2_bncr_value);
978 /* EBC Bank3 */
979 mtebc(pb3ap, ebc0_cs3_bnap_value);
980 mtebc(pb3cr, ebc0_cs3_bncr_value);
981 /* EBC Bank4 */
982 mtebc(pb4ap, ebc0_cs4_bnap_value);
983 mtebc(pb4cr, ebc0_cs4_bncr_value);
984
985 return;
986}
987
988
989/*----------------------------------------------------------------------------+
990 | get_uart_configuration.
991 +----------------------------------------------------------------------------*/
992uart_config_nb_t get_uart_configuration(void)
993{
Stefan Roesec57c7982005-08-11 17:56:56 +0200994 return (L4);
Stefan Roese17f50f222005-08-04 17:09:16 +0200995}
996
997/*----------------------------------------------------------------------------+
998 | set_phy_configuration_through_fpga => to EPLD
999 +----------------------------------------------------------------------------*/
1000void set_phy_configuration_through_fpga(zmii_config_t config)
Stefan Roese8a316c92005-08-01 16:49:12 +02001001{
1002
Stefan Roese17f50f222005-08-04 17:09:16 +02001003 unsigned long fpga_selection_reg;
1004
1005 fpga_selection_reg = in8(FPGA_SELECTION_1_REG) & ~FPGA_SEL_1_REG_PHY_MASK;
1006
1007 switch(config)
1008 {
Wolfgang Denkf901a832005-08-06 01:42:58 +02001009 case ZMII_CONFIGURATION_IS_MII:
Stefan Roese17f50f222005-08-04 17:09:16 +02001010 fpga_selection_reg = fpga_selection_reg | FPGA_SEL_1_REG_MII;
1011 break;
Wolfgang Denkf901a832005-08-06 01:42:58 +02001012 case ZMII_CONFIGURATION_IS_RMII:
Stefan Roese17f50f222005-08-04 17:09:16 +02001013 fpga_selection_reg = fpga_selection_reg | FPGA_SEL_1_REG_RMII;
1014 break;
Wolfgang Denkf901a832005-08-06 01:42:58 +02001015 case ZMII_CONFIGURATION_IS_SMII:
Stefan Roese17f50f222005-08-04 17:09:16 +02001016 fpga_selection_reg = fpga_selection_reg | FPGA_SEL_1_REG_SMII;
1017 break;
Wolfgang Denkf901a832005-08-06 01:42:58 +02001018 case ZMII_CONFIGURATION_UNKNOWN:
1019 default:
Stefan Roese17f50f222005-08-04 17:09:16 +02001020 break;
1021 }
1022 out8(FPGA_SELECTION_1_REG,fpga_selection_reg);
1023
Stefan Roese8a316c92005-08-01 16:49:12 +02001024}
Stefan Roese17f50f222005-08-04 17:09:16 +02001025
1026/*----------------------------------------------------------------------------+
1027 | scp_selection_in_fpga.
1028 +----------------------------------------------------------------------------*/
1029void scp_selection_in_fpga(void)
1030{
1031 unsigned long fpga_selection_2_reg;
1032
1033 fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_IIC1_SCP_SEL_MASK;
1034 fpga_selection_2_reg |= FPGA_SEL2_REG_SEL_SCP;
1035 out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
1036}
1037
1038/*----------------------------------------------------------------------------+
1039 | iic1_selection_in_fpga.
1040 +----------------------------------------------------------------------------*/
1041void iic1_selection_in_fpga(void)
1042{
1043 unsigned long fpga_selection_2_reg;
1044
1045 fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_IIC1_SCP_SEL_MASK;
1046 fpga_selection_2_reg |= FPGA_SEL2_REG_SEL_IIC1;
1047 out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
1048}
1049
1050/*----------------------------------------------------------------------------+
1051 | dma_a_b_selection_in_fpga.
1052 +----------------------------------------------------------------------------*/
1053void dma_a_b_selection_in_fpga(void)
1054{
1055 unsigned long fpga_selection_2_reg;
1056
1057 fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) | FPGA_SEL2_REG_SEL_DMA_A_B;
1058 out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
1059}
1060
1061/*----------------------------------------------------------------------------+
1062 | dma_a_b_unselect_in_fpga.
1063 +----------------------------------------------------------------------------*/
1064void dma_a_b_unselect_in_fpga(void)
1065{
1066 unsigned long fpga_selection_2_reg;
1067
1068 fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_SEL_DMA_A_B;
1069 out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
1070}
1071
1072/*----------------------------------------------------------------------------+
1073 | dma_c_d_selection_in_fpga.
1074 +----------------------------------------------------------------------------*/
1075void dma_c_d_selection_in_fpga(void)
1076{
1077 unsigned long fpga_selection_2_reg;
1078
1079 fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) | FPGA_SEL2_REG_SEL_DMA_C_D;
1080 out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
1081}
1082
1083/*----------------------------------------------------------------------------+
1084 | dma_c_d_unselect_in_fpga.
1085 +----------------------------------------------------------------------------*/
1086void dma_c_d_unselect_in_fpga(void)
1087{
1088 unsigned long fpga_selection_2_reg;
1089
1090 fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_SEL_DMA_C_D;
1091 out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
1092}
1093
1094/*----------------------------------------------------------------------------+
1095 | usb2_device_selection_in_fpga.
1096 +----------------------------------------------------------------------------*/
1097void usb2_device_selection_in_fpga(void)
1098{
1099 unsigned long fpga_selection_1_reg;
1100
1101 fpga_selection_1_reg = in8(FPGA_SELECTION_1_REG) | FPGA_SEL_1_REG_USB2_DEV_SEL;
1102 out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg);
1103}
1104
1105/*----------------------------------------------------------------------------+
1106 | usb2_device_reset_through_fpga.
1107 +----------------------------------------------------------------------------*/
1108void usb2_device_reset_through_fpga(void)
1109{
1110 /* Perform soft Reset pulse */
1111 unsigned long fpga_reset_reg;
1112 int i;
1113
1114 fpga_reset_reg = in8(FPGA_RESET_REG);
1115 out8(FPGA_RESET_REG,fpga_reset_reg | FPGA_RESET_REG_RESET_USB20_DEV);
1116 for (i=0; i<500; i++)
1117 udelay(1000);
1118 out8(FPGA_RESET_REG,fpga_reset_reg);
1119}
1120
1121/*----------------------------------------------------------------------------+
1122 | usb2_host_selection_in_fpga.
1123 +----------------------------------------------------------------------------*/
1124void usb2_host_selection_in_fpga(void)
1125{
1126 unsigned long fpga_selection_1_reg;
1127
1128 fpga_selection_1_reg = in8(FPGA_SELECTION_1_REG) | FPGA_SEL_1_REG_USB2_HOST_SEL;
1129 out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg);
1130}
1131
1132/*----------------------------------------------------------------------------+
1133 | ndfc_selection_in_fpga.
1134 +----------------------------------------------------------------------------*/
1135void ndfc_selection_in_fpga(void)
1136{
1137 unsigned long fpga_selection_1_reg;
1138
1139 fpga_selection_1_reg = in8(FPGA_SELECTION_1_REG) &~FPGA_SEL_1_REG_NF_SELEC_MASK;
1140 fpga_selection_1_reg |= FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1;
Stefan Roesec57c7982005-08-11 17:56:56 +02001141 fpga_selection_1_reg |= FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2;
Stefan Roese17f50f222005-08-04 17:09:16 +02001142 out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg);
1143}
1144
1145/*----------------------------------------------------------------------------+
1146 | uart_selection_in_fpga.
1147 +----------------------------------------------------------------------------*/
1148void uart_selection_in_fpga(uart_config_nb_t uart_config)
1149{
1150 /* FPGA register */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001151 unsigned char fpga_selection_3_reg;
Stefan Roese17f50f222005-08-04 17:09:16 +02001152
1153 /* Read FPGA Reagister */
1154 fpga_selection_3_reg = in8(FPGA_SELECTION_3_REG);
1155
1156 switch (uart_config)
1157 {
1158 case L1:
1159 /* ----------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001160 /* L1 configuration: UART0 = 8 pins */
Stefan Roese17f50f222005-08-04 17:09:16 +02001161 /* ----------------------------------------------------------------------- */
1162 /* Configure FPGA */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001163 fpga_selection_3_reg = fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK;
1164 fpga_selection_3_reg = fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001165 out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg);
1166
1167 break;
1168
1169 case L2:
1170 /* ----------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001171 /* L2 configuration: UART0 = 4 pins */
1172 /* UART1 = 4 pins */
Stefan Roese17f50f222005-08-04 17:09:16 +02001173 /* ----------------------------------------------------------------------- */
1174 /* Configure FPGA */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001175 fpga_selection_3_reg = fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK;
1176 fpga_selection_3_reg = fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG2;
Stefan Roese17f50f222005-08-04 17:09:16 +02001177 out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg);
1178
1179 break;
1180
1181 case L3:
1182 /* ----------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001183 /* L3 configuration: UART0 = 4 pins */
1184 /* UART1 = 2 pins */
1185 /* UART2 = 2 pins */
Stefan Roese17f50f222005-08-04 17:09:16 +02001186 /* ----------------------------------------------------------------------- */
1187 /* Configure FPGA */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001188 fpga_selection_3_reg = fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK;
1189 fpga_selection_3_reg = fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG3;
Stefan Roese17f50f222005-08-04 17:09:16 +02001190 out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg);
1191 break;
1192
1193 case L4:
1194 /* Configure FPGA */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001195 fpga_selection_3_reg = fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK;
1196 fpga_selection_3_reg = fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG4;
Stefan Roese17f50f222005-08-04 17:09:16 +02001197 out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg);
1198
1199 break;
1200
1201 default:
1202 /* Unsupported UART configuration number */
1203 for (;;)
1204 ;
1205 break;
1206
1207 }
1208}
1209
1210
1211/*----------------------------------------------------------------------------+
1212 | init_default_gpio
1213 +----------------------------------------------------------------------------*/
1214void init_default_gpio(void)
1215{
1216 int i;
1217
1218 /* Init GPIO0 */
1219 for(i=0; i<GPIO_MAX; i++)
1220 {
Wolfgang Denkf901a832005-08-06 01:42:58 +02001221 gpio_tab[GPIO0][i].add = GPIO0_BASE;
Stefan Roese17f50f222005-08-04 17:09:16 +02001222 gpio_tab[GPIO0][i].in_out = GPIO_DIS;
1223 gpio_tab[GPIO0][i].alt_nb = GPIO_SEL;
1224 }
1225
1226 /* Init GPIO1 */
1227 for(i=0; i<GPIO_MAX; i++)
1228 {
Wolfgang Denkf901a832005-08-06 01:42:58 +02001229 gpio_tab[GPIO1][i].add = GPIO1_BASE;
Stefan Roese17f50f222005-08-04 17:09:16 +02001230 gpio_tab[GPIO1][i].in_out = GPIO_DIS;
1231 gpio_tab[GPIO1][i].alt_nb = GPIO_SEL;
1232 }
1233
1234 /* EBC_CS_N(5) - GPIO0_10 */
1235 gpio_tab[GPIO0][10].in_out = GPIO_OUT;
1236 gpio_tab[GPIO0][10].alt_nb = GPIO_ALT1;
1237
1238 /* EBC_CS_N(4) - GPIO0_9 */
1239 gpio_tab[GPIO0][9].in_out = GPIO_OUT;
1240 gpio_tab[GPIO0][9].alt_nb = GPIO_ALT1;
1241}
1242
1243/*----------------------------------------------------------------------------+
1244 | update_uart_ios
1245 +------------------------------------------------------------------------------
1246 |
1247 | Set UART Configuration in PowerPC440EP
1248 |
1249 | +---------------------------------------------------------------------+
Wolfgang Denkf901a832005-08-06 01:42:58 +02001250 | | Configuartion | Connector | Nb of pins | Pins | Associated |
1251 | | Number | Port Name | available | naming | CORE |
Stefan Roese17f50f222005-08-04 17:09:16 +02001252 | +-----------------+---------------+------------+--------+-------------+
Wolfgang Denkf901a832005-08-06 01:42:58 +02001253 | | L1 | Port_A | 8 | UART | UART core 0 |
Stefan Roese17f50f222005-08-04 17:09:16 +02001254 | +-----------------+---------------+------------+--------+-------------+
Wolfgang Denkf901a832005-08-06 01:42:58 +02001255 | | L2 | Port_A | 4 | UART1 | UART core 0 |
1256 | | (L2D) | Port_B | 4 | UART2 | UART core 1 |
Stefan Roese17f50f222005-08-04 17:09:16 +02001257 | +-----------------+---------------+------------+--------+-------------+
Wolfgang Denkf901a832005-08-06 01:42:58 +02001258 | | L3 | Port_A | 4 | UART1 | UART core 0 |
1259 | | (L3D) | Port_B | 2 | UART2 | UART core 1 |
1260 | | | Port_C | 2 | UART3 | UART core 2 |
Stefan Roese17f50f222005-08-04 17:09:16 +02001261 | +-----------------+---------------+------------+--------+-------------+
Wolfgang Denkf901a832005-08-06 01:42:58 +02001262 | | | Port_A | 2 | UART1 | UART core 0 |
1263 | | L4 | Port_B | 2 | UART2 | UART core 1 |
1264 | | (L4D) | Port_C | 2 | UART3 | UART core 2 |
1265 | | | Port_D | 2 | UART4 | UART core 3 |
Stefan Roese17f50f222005-08-04 17:09:16 +02001266 | +-----------------+---------------+------------+--------+-------------+
1267 |
1268 | Involved GPIOs
1269 |
1270 | +------------------------------------------------------------------------------+
Wolfgang Denkf901a832005-08-06 01:42:58 +02001271 | | GPIO | Aternate 1 | I/O | Alternate 2 | I/O | Alternate 3 | I/O |
Stefan Roese17f50f222005-08-04 17:09:16 +02001272 | +---------+------------------+-----+-----------------+-----+-------------+-----+
Wolfgang Denkf901a832005-08-06 01:42:58 +02001273 | | GPIO1_2 | UART0_DCD_N | I | UART1_DSR_CTS_N | I | UART2_SOUT | O |
1274 | | GPIO1_3 | UART0_8PIN_DSR_N | I | UART1_RTS_DTR_N | O | UART2_SIN | I |
1275 | | GPIO1_4 | UART0_8PIN_CTS_N | I | NA | NA | UART3_SIN | I |
1276 | | GPIO1_5 | UART0_RTS_N | O | NA | NA | UART3_SOUT | O |
1277 | | GPIO1_6 | UART0_DTR_N | O | UART1_SOUT | O | NA | NA |
1278 | | GPIO1_7 | UART0_RI_N | I | UART1_SIN | I | NA | NA |
Stefan Roese17f50f222005-08-04 17:09:16 +02001279 | +------------------------------------------------------------------------------+
1280 |
1281 |
1282 +----------------------------------------------------------------------------*/
1283
1284void update_uart_ios(uart_config_nb_t uart_config)
1285{
1286 switch (uart_config)
1287 {
1288 case L1:
1289 /* ----------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001290 /* L1 configuration: UART0 = 8 pins */
Stefan Roese17f50f222005-08-04 17:09:16 +02001291 /* ----------------------------------------------------------------------- */
1292 /* Update GPIO Configuration Table */
1293 gpio_tab[GPIO1][2].in_out = GPIO_IN;
1294 gpio_tab[GPIO1][2].alt_nb = GPIO_ALT1;
1295
1296 gpio_tab[GPIO1][3].in_out = GPIO_IN;
1297 gpio_tab[GPIO1][3].alt_nb = GPIO_ALT1;
1298
1299 gpio_tab[GPIO1][4].in_out = GPIO_IN;
1300 gpio_tab[GPIO1][4].alt_nb = GPIO_ALT1;
1301
1302 gpio_tab[GPIO1][5].in_out = GPIO_OUT;
1303 gpio_tab[GPIO1][5].alt_nb = GPIO_ALT1;
1304
1305 gpio_tab[GPIO1][6].in_out = GPIO_OUT;
1306 gpio_tab[GPIO1][6].alt_nb = GPIO_ALT1;
1307
1308 gpio_tab[GPIO1][7].in_out = GPIO_IN;
1309 gpio_tab[GPIO1][7].alt_nb = GPIO_ALT1;
1310
1311 break;
1312
1313 case L2:
1314 /* ----------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001315 /* L2 configuration: UART0 = 4 pins */
1316 /* UART1 = 4 pins */
Stefan Roese17f50f222005-08-04 17:09:16 +02001317 /* ----------------------------------------------------------------------- */
1318 /* Update GPIO Configuration Table */
1319 gpio_tab[GPIO1][2].in_out = GPIO_IN;
1320 gpio_tab[GPIO1][2].alt_nb = GPIO_ALT2;
1321
1322 gpio_tab[GPIO1][3].in_out = GPIO_OUT;
1323 gpio_tab[GPIO1][3].alt_nb = GPIO_ALT2;
1324
1325 gpio_tab[GPIO1][4].in_out = GPIO_IN;
1326 gpio_tab[GPIO1][4].alt_nb = GPIO_ALT1;
1327
1328 gpio_tab[GPIO1][5].in_out = GPIO_OUT;
1329 gpio_tab[GPIO1][5].alt_nb = GPIO_ALT1;
1330
1331 gpio_tab[GPIO1][6].in_out = GPIO_OUT;
1332 gpio_tab[GPIO1][6].alt_nb = GPIO_ALT2;
1333
1334 gpio_tab[GPIO1][7].in_out = GPIO_IN;
1335 gpio_tab[GPIO1][7].alt_nb = GPIO_ALT2;
1336
1337 break;
1338
1339 case L3:
1340 /* ----------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001341 /* L3 configuration: UART0 = 4 pins */
1342 /* UART1 = 2 pins */
1343 /* UART2 = 2 pins */
Stefan Roese17f50f222005-08-04 17:09:16 +02001344 /* ----------------------------------------------------------------------- */
1345 /* Update GPIO Configuration Table */
1346 gpio_tab[GPIO1][2].in_out = GPIO_OUT;
1347 gpio_tab[GPIO1][2].alt_nb = GPIO_ALT3;
1348
1349 gpio_tab[GPIO1][3].in_out = GPIO_IN;
1350 gpio_tab[GPIO1][3].alt_nb = GPIO_ALT3;
1351
1352 gpio_tab[GPIO1][4].in_out = GPIO_IN;
1353 gpio_tab[GPIO1][4].alt_nb = GPIO_ALT1;
1354
1355 gpio_tab[GPIO1][5].in_out = GPIO_OUT;
1356 gpio_tab[GPIO1][5].alt_nb = GPIO_ALT1;
1357
1358 gpio_tab[GPIO1][6].in_out = GPIO_OUT;
1359 gpio_tab[GPIO1][6].alt_nb = GPIO_ALT2;
1360
1361 gpio_tab[GPIO1][7].in_out = GPIO_IN;
1362 gpio_tab[GPIO1][7].alt_nb = GPIO_ALT2;
1363
1364 break;
1365
1366 case L4:
1367 /* ----------------------------------------------------------------------- */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001368 /* L4 configuration: UART0 = 2 pins */
1369 /* UART1 = 2 pins */
1370 /* UART2 = 2 pins */
1371 /* UART3 = 2 pins */
Stefan Roese17f50f222005-08-04 17:09:16 +02001372 /* ----------------------------------------------------------------------- */
1373 /* Update GPIO Configuration Table */
1374 gpio_tab[GPIO1][2].in_out = GPIO_OUT;
1375 gpio_tab[GPIO1][2].alt_nb = GPIO_ALT3;
1376
1377 gpio_tab[GPIO1][3].in_out = GPIO_IN;
1378 gpio_tab[GPIO1][3].alt_nb = GPIO_ALT3;
1379
1380 gpio_tab[GPIO1][4].in_out = GPIO_IN;
1381 gpio_tab[GPIO1][4].alt_nb = GPIO_ALT3;
1382
1383 gpio_tab[GPIO1][5].in_out = GPIO_OUT;
1384 gpio_tab[GPIO1][5].alt_nb = GPIO_ALT3;
1385
1386 gpio_tab[GPIO1][6].in_out = GPIO_OUT;
1387 gpio_tab[GPIO1][6].alt_nb = GPIO_ALT2;
1388
1389 gpio_tab[GPIO1][7].in_out = GPIO_IN;
1390 gpio_tab[GPIO1][7].alt_nb = GPIO_ALT2;
1391
1392 break;
1393
1394 default:
1395 /* Unsupported UART configuration number */
1396 printf("ERROR - Unsupported UART configuration number.\n\n");
1397 for (;;)
1398 ;
1399 break;
1400
1401 }
1402
1403 /* Set input Selection Register on Alt_Receive for UART Input Core */
1404 out32(GPIO1_IS1L, (in32(GPIO1_IS1L) | 0x0FC30000));
1405 out32(GPIO1_IS2L, (in32(GPIO1_IS2L) | 0x0C030000));
1406 out32(GPIO1_IS3L, (in32(GPIO1_IS3L) | 0x03C00000));
1407}
1408
1409/*----------------------------------------------------------------------------+
1410 | update_ndfc_ios(void).
1411 +----------------------------------------------------------------------------*/
1412void update_ndfc_ios(void)
1413{
Wolfgang Denkf901a832005-08-06 01:42:58 +02001414 /* Update GPIO Configuration Table */
1415 gpio_tab[GPIO0][6].in_out = GPIO_OUT; /* EBC_CS_N(1) */
1416 gpio_tab[GPIO0][6].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001417
Wolfgang Denkf901a832005-08-06 01:42:58 +02001418 gpio_tab[GPIO0][7].in_out = GPIO_OUT; /* EBC_CS_N(2) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001419 gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1;
1420
Stefan Roesea471db02007-06-01 15:19:29 +02001421#if 0
Wolfgang Denkf901a832005-08-06 01:42:58 +02001422 gpio_tab[GPIO0][7].in_out = GPIO_OUT; /* EBC_CS_N(3) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001423 gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1;
Stefan Roese8a316c92005-08-01 16:49:12 +02001424#endif
Stefan Roese17f50f222005-08-04 17:09:16 +02001425}
1426
1427/*----------------------------------------------------------------------------+
1428 | update_zii_ios(void).
1429 +----------------------------------------------------------------------------*/
1430void update_zii_ios(void)
1431{
Wolfgang Denkf901a832005-08-06 01:42:58 +02001432 /* Update GPIO Configuration Table */
1433 gpio_tab[GPIO0][12].in_out = GPIO_IN; /* ZII_p0Rxd(0) */
1434 gpio_tab[GPIO0][12].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001435
Wolfgang Denkf901a832005-08-06 01:42:58 +02001436 gpio_tab[GPIO0][13].in_out = GPIO_IN; /* ZII_p0Rxd(1) */
1437 gpio_tab[GPIO0][13].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001438
Wolfgang Denkf901a832005-08-06 01:42:58 +02001439 gpio_tab[GPIO0][14].in_out = GPIO_IN; /* ZII_p0Rxd(2) */
1440 gpio_tab[GPIO0][14].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001441
Wolfgang Denkf901a832005-08-06 01:42:58 +02001442 gpio_tab[GPIO0][15].in_out = GPIO_IN; /* ZII_p0Rxd(3) */
1443 gpio_tab[GPIO0][15].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001444
Wolfgang Denkf901a832005-08-06 01:42:58 +02001445 gpio_tab[GPIO0][16].in_out = GPIO_OUT; /* ZII_p0Txd(0) */
1446 gpio_tab[GPIO0][16].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001447
Wolfgang Denkf901a832005-08-06 01:42:58 +02001448 gpio_tab[GPIO0][17].in_out = GPIO_OUT; /* ZII_p0Txd(1) */
1449 gpio_tab[GPIO0][17].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001450
Wolfgang Denkf901a832005-08-06 01:42:58 +02001451 gpio_tab[GPIO0][18].in_out = GPIO_OUT; /* ZII_p0Txd(2) */
1452 gpio_tab[GPIO0][18].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001453
Wolfgang Denkf901a832005-08-06 01:42:58 +02001454 gpio_tab[GPIO0][19].in_out = GPIO_OUT; /* ZII_p0Txd(3) */
1455 gpio_tab[GPIO0][19].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001456
Wolfgang Denkf901a832005-08-06 01:42:58 +02001457 gpio_tab[GPIO0][20].in_out = GPIO_IN; /* ZII_p0Rx_er */
1458 gpio_tab[GPIO0][20].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001459
Wolfgang Denkf901a832005-08-06 01:42:58 +02001460 gpio_tab[GPIO0][21].in_out = GPIO_IN; /* ZII_p0Rx_dv */
1461 gpio_tab[GPIO0][21].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001462
Wolfgang Denkf901a832005-08-06 01:42:58 +02001463 gpio_tab[GPIO0][22].in_out = GPIO_IN; /* ZII_p0Crs */
1464 gpio_tab[GPIO0][22].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001465
Wolfgang Denkf901a832005-08-06 01:42:58 +02001466 gpio_tab[GPIO0][23].in_out = GPIO_OUT; /* ZII_p0Tx_er */
1467 gpio_tab[GPIO0][23].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001468
Wolfgang Denkf901a832005-08-06 01:42:58 +02001469 gpio_tab[GPIO0][24].in_out = GPIO_OUT; /* ZII_p0Tx_en */
1470 gpio_tab[GPIO0][24].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001471
Wolfgang Denkf901a832005-08-06 01:42:58 +02001472 gpio_tab[GPIO0][25].in_out = GPIO_IN; /* ZII_p0Col */
1473 gpio_tab[GPIO0][25].alt_nb = GPIO_ALT1;
Stefan Roese17f50f222005-08-04 17:09:16 +02001474
1475}
1476
1477/*----------------------------------------------------------------------------+
1478 | update_uic_0_3_irq_ios().
1479 +----------------------------------------------------------------------------*/
1480void update_uic_0_3_irq_ios(void)
1481{
Wolfgang Denkf901a832005-08-06 01:42:58 +02001482 gpio_tab[GPIO1][8].in_out = GPIO_IN; /* UIC_IRQ(0) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001483 gpio_tab[GPIO1][8].alt_nb = GPIO_ALT1;
1484
Wolfgang Denkf901a832005-08-06 01:42:58 +02001485 gpio_tab[GPIO1][9].in_out = GPIO_IN; /* UIC_IRQ(1) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001486 gpio_tab[GPIO1][9].alt_nb = GPIO_ALT1;
1487
Wolfgang Denkf901a832005-08-06 01:42:58 +02001488 gpio_tab[GPIO1][10].in_out = GPIO_IN; /* UIC_IRQ(2) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001489 gpio_tab[GPIO1][10].alt_nb = GPIO_ALT1;
1490
Wolfgang Denkf901a832005-08-06 01:42:58 +02001491 gpio_tab[GPIO1][11].in_out = GPIO_IN; /* UIC_IRQ(3) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001492 gpio_tab[GPIO1][11].alt_nb = GPIO_ALT1;
1493}
1494
1495/*----------------------------------------------------------------------------+
1496 | update_uic_4_9_irq_ios().
1497 +----------------------------------------------------------------------------*/
1498void update_uic_4_9_irq_ios(void)
1499{
Wolfgang Denkf901a832005-08-06 01:42:58 +02001500 gpio_tab[GPIO1][12].in_out = GPIO_IN; /* UIC_IRQ(4) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001501 gpio_tab[GPIO1][12].alt_nb = GPIO_ALT1;
1502
Wolfgang Denkf901a832005-08-06 01:42:58 +02001503 gpio_tab[GPIO1][13].in_out = GPIO_IN; /* UIC_IRQ(6) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001504 gpio_tab[GPIO1][13].alt_nb = GPIO_ALT1;
1505
Wolfgang Denkf901a832005-08-06 01:42:58 +02001506 gpio_tab[GPIO1][14].in_out = GPIO_IN; /* UIC_IRQ(7) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001507 gpio_tab[GPIO1][14].alt_nb = GPIO_ALT1;
1508
Wolfgang Denkf901a832005-08-06 01:42:58 +02001509 gpio_tab[GPIO1][15].in_out = GPIO_IN; /* UIC_IRQ(8) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001510 gpio_tab[GPIO1][15].alt_nb = GPIO_ALT1;
1511
Wolfgang Denkf901a832005-08-06 01:42:58 +02001512 gpio_tab[GPIO1][16].in_out = GPIO_IN; /* UIC_IRQ(9) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001513 gpio_tab[GPIO1][16].alt_nb = GPIO_ALT1;
1514}
1515
1516/*----------------------------------------------------------------------------+
1517 | update_dma_a_b_ios().
1518 +----------------------------------------------------------------------------*/
1519void update_dma_a_b_ios(void)
1520{
Wolfgang Denkf901a832005-08-06 01:42:58 +02001521 gpio_tab[GPIO1][12].in_out = GPIO_OUT; /* DMA_ACK(1) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001522 gpio_tab[GPIO1][12].alt_nb = GPIO_ALT2;
1523
Wolfgang Denkf901a832005-08-06 01:42:58 +02001524 gpio_tab[GPIO1][13].in_out = GPIO_BI; /* DMA_EOT/TC(1) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001525 gpio_tab[GPIO1][13].alt_nb = GPIO_ALT2;
1526
Wolfgang Denkf901a832005-08-06 01:42:58 +02001527 gpio_tab[GPIO1][14].in_out = GPIO_IN; /* DMA_REQ(0) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001528 gpio_tab[GPIO1][14].alt_nb = GPIO_ALT2;
1529
Wolfgang Denkf901a832005-08-06 01:42:58 +02001530 gpio_tab[GPIO1][15].in_out = GPIO_OUT; /* DMA_ACK(0) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001531 gpio_tab[GPIO1][15].alt_nb = GPIO_ALT2;
1532
Wolfgang Denkf901a832005-08-06 01:42:58 +02001533 gpio_tab[GPIO1][16].in_out = GPIO_BI; /* DMA_EOT/TC(0) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001534 gpio_tab[GPIO1][16].alt_nb = GPIO_ALT2;
1535}
1536
1537/*----------------------------------------------------------------------------+
1538 | update_dma_c_d_ios().
1539 +----------------------------------------------------------------------------*/
1540void update_dma_c_d_ios(void)
1541{
Wolfgang Denkf901a832005-08-06 01:42:58 +02001542 gpio_tab[GPIO0][0].in_out = GPIO_IN; /* DMA_REQ(2) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001543 gpio_tab[GPIO0][0].alt_nb = GPIO_ALT2;
1544
Wolfgang Denkf901a832005-08-06 01:42:58 +02001545 gpio_tab[GPIO0][1].in_out = GPIO_OUT; /* DMA_ACK(2) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001546 gpio_tab[GPIO0][1].alt_nb = GPIO_ALT2;
1547
Wolfgang Denkf901a832005-08-06 01:42:58 +02001548 gpio_tab[GPIO0][2].in_out = GPIO_BI; /* DMA_EOT/TC(2) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001549 gpio_tab[GPIO0][2].alt_nb = GPIO_ALT2;
1550
Wolfgang Denkf901a832005-08-06 01:42:58 +02001551 gpio_tab[GPIO0][3].in_out = GPIO_IN; /* DMA_REQ(3) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001552 gpio_tab[GPIO0][3].alt_nb = GPIO_ALT2;
1553
Wolfgang Denkf901a832005-08-06 01:42:58 +02001554 gpio_tab[GPIO0][4].in_out = GPIO_OUT; /* DMA_ACK(3) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001555 gpio_tab[GPIO0][4].alt_nb = GPIO_ALT2;
1556
Wolfgang Denkf901a832005-08-06 01:42:58 +02001557 gpio_tab[GPIO0][5].in_out = GPIO_BI; /* DMA_EOT/TC(3) */
Stefan Roese17f50f222005-08-04 17:09:16 +02001558 gpio_tab[GPIO0][5].alt_nb = GPIO_ALT2;
1559
1560}
1561
1562/*----------------------------------------------------------------------------+
1563 | update_ebc_master_ios().
1564 +----------------------------------------------------------------------------*/
1565void update_ebc_master_ios(void)
1566{
Wolfgang Denkf901a832005-08-06 01:42:58 +02001567 gpio_tab[GPIO0][27].in_out = GPIO_IN; /* EXT_EBC_REQ */
Stefan Roese17f50f222005-08-04 17:09:16 +02001568 gpio_tab[GPIO0][27].alt_nb = GPIO_ALT1;
1569
Wolfgang Denkf901a832005-08-06 01:42:58 +02001570 gpio_tab[GPIO0][29].in_out = GPIO_OUT; /* EBC_EXT_HDLA */
Stefan Roese17f50f222005-08-04 17:09:16 +02001571 gpio_tab[GPIO0][29].alt_nb = GPIO_ALT1;
1572
Wolfgang Denkf901a832005-08-06 01:42:58 +02001573 gpio_tab[GPIO0][30].in_out = GPIO_OUT; /* EBC_EXT_ACK */
Stefan Roese17f50f222005-08-04 17:09:16 +02001574 gpio_tab[GPIO0][30].alt_nb = GPIO_ALT1;
1575
Wolfgang Denkf901a832005-08-06 01:42:58 +02001576 gpio_tab[GPIO0][31].in_out = GPIO_OUT; /* EBC_EXR_BUSREQ */
Stefan Roese17f50f222005-08-04 17:09:16 +02001577 gpio_tab[GPIO0][31].alt_nb = GPIO_ALT1;
1578}
1579
1580/*----------------------------------------------------------------------------+
1581 | update_usb2_device_ios().
1582 +----------------------------------------------------------------------------*/
1583void update_usb2_device_ios(void)
1584{
Wolfgang Denkf901a832005-08-06 01:42:58 +02001585 gpio_tab[GPIO0][26].in_out = GPIO_IN; /* USB2D_RXVALID */
Stefan Roese17f50f222005-08-04 17:09:16 +02001586 gpio_tab[GPIO0][26].alt_nb = GPIO_ALT2;
1587
Wolfgang Denkf901a832005-08-06 01:42:58 +02001588 gpio_tab[GPIO0][27].in_out = GPIO_IN; /* USB2D_RXERROR */
Stefan Roese17f50f222005-08-04 17:09:16 +02001589 gpio_tab[GPIO0][27].alt_nb = GPIO_ALT2;
1590
Wolfgang Denkf901a832005-08-06 01:42:58 +02001591 gpio_tab[GPIO0][28].in_out = GPIO_OUT; /* USB2D_TXVALID */
Stefan Roese17f50f222005-08-04 17:09:16 +02001592 gpio_tab[GPIO0][28].alt_nb = GPIO_ALT2;
1593
Wolfgang Denkf901a832005-08-06 01:42:58 +02001594 gpio_tab[GPIO0][29].in_out = GPIO_OUT; /* USB2D_PAD_SUSPNDM */
Stefan Roese17f50f222005-08-04 17:09:16 +02001595 gpio_tab[GPIO0][29].alt_nb = GPIO_ALT2;
1596
Wolfgang Denkf901a832005-08-06 01:42:58 +02001597 gpio_tab[GPIO0][30].in_out = GPIO_OUT; /* USB2D_XCVRSELECT */
Stefan Roese17f50f222005-08-04 17:09:16 +02001598 gpio_tab[GPIO0][30].alt_nb = GPIO_ALT2;
1599
Wolfgang Denkf901a832005-08-06 01:42:58 +02001600 gpio_tab[GPIO0][31].in_out = GPIO_OUT; /* USB2D_TERMSELECT */
Stefan Roese17f50f222005-08-04 17:09:16 +02001601 gpio_tab[GPIO0][31].alt_nb = GPIO_ALT2;
1602
Wolfgang Denkf901a832005-08-06 01:42:58 +02001603 gpio_tab[GPIO1][0].in_out = GPIO_OUT; /* USB2D_OPMODE0 */
Stefan Roese17f50f222005-08-04 17:09:16 +02001604 gpio_tab[GPIO1][0].alt_nb = GPIO_ALT1;
1605
Wolfgang Denkf901a832005-08-06 01:42:58 +02001606 gpio_tab[GPIO1][1].in_out = GPIO_OUT; /* USB2D_OPMODE1 */
Stefan Roese17f50f222005-08-04 17:09:16 +02001607 gpio_tab[GPIO1][1].alt_nb = GPIO_ALT1;
1608
1609}
1610
1611/*----------------------------------------------------------------------------+
1612 | update_pci_patch_ios().
1613 +----------------------------------------------------------------------------*/
1614void update_pci_patch_ios(void)
1615{
Wolfgang Denkf901a832005-08-06 01:42:58 +02001616 gpio_tab[GPIO0][29].in_out = GPIO_OUT; /* EBC_EXT_HDLA */
Stefan Roese17f50f222005-08-04 17:09:16 +02001617 gpio_tab[GPIO0][29].alt_nb = GPIO_ALT1;
1618}
1619
1620/*----------------------------------------------------------------------------+
1621 | set_chip_gpio_configuration(unsigned char gpio_core)
1622 | Put the core impacted by clock modification and sharing in reset.
1623 | Config the select registers to resolve the sharing depending of the config.
1624 | Configure the GPIO registers.
1625 |
1626 +----------------------------------------------------------------------------*/
1627void set_chip_gpio_configuration(unsigned char gpio_core)
1628{
1629 unsigned char i=0, j=0, reg_offset = 0;
1630 unsigned long gpio_reg, gpio_core_add;
1631
1632 /* GPIO config of the GPIOs 0 to 31 */
1633 for (i=0; i<GPIO_MAX; i++, j++)
1634 {
1635 if (i == GPIO_MAX/2)
1636 {
1637 reg_offset = 4;
1638 j = i-16;
1639 }
1640
1641 gpio_core_add = gpio_tab[gpio_core][i].add;
1642
1643 if ( (gpio_tab[gpio_core][i].in_out == GPIO_IN) ||
1644 (gpio_tab[gpio_core][i].in_out == GPIO_BI ))
1645 {
1646 switch (gpio_tab[gpio_core][i].alt_nb)
1647 {
1648 case GPIO_SEL:
1649 break;
1650
1651 case GPIO_ALT1:
1652 gpio_reg = in32(GPIO_IS1(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
1653 gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2));
1654 out32(GPIO_IS1(gpio_core_add+reg_offset), gpio_reg);
1655 break;
1656
1657 case GPIO_ALT2:
1658 gpio_reg = in32(GPIO_IS2(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
1659 gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2));
1660 out32(GPIO_IS2(gpio_core_add+reg_offset), gpio_reg);
1661 break;
1662
1663 case GPIO_ALT3:
1664 gpio_reg = in32(GPIO_IS3(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
1665 gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2));
1666 out32(GPIO_IS3(gpio_core_add+reg_offset), gpio_reg);
1667 break;
1668 }
1669 }
1670 if ( (gpio_tab[gpio_core][i].in_out == GPIO_OUT) ||
1671 (gpio_tab[gpio_core][i].in_out == GPIO_BI ))
1672 {
1673
1674 switch (gpio_tab[gpio_core][i].alt_nb)
1675 {
1676 case GPIO_SEL:
1677 break;
1678 case GPIO_ALT1:
1679 gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
1680 gpio_reg = gpio_reg | (GPIO_ALT1_SEL >> (j*2));
1681 out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg);
1682 gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
1683 gpio_reg = gpio_reg | (GPIO_ALT1_SEL >> (j*2));
1684 out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg);
1685 break;
1686 case GPIO_ALT2:
1687 gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
1688 gpio_reg = gpio_reg | (GPIO_ALT2_SEL >> (j*2));
1689 out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg);
1690 gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
1691 gpio_reg = gpio_reg | (GPIO_ALT2_SEL >> (j*2));
1692 out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg);
1693 break;
1694 case GPIO_ALT3:
1695 gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
1696 gpio_reg = gpio_reg | (GPIO_ALT3_SEL >> (j*2));
1697 out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg);
1698 gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
1699 gpio_reg = gpio_reg | (GPIO_ALT3_SEL >> (j*2));
1700 out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg);
1701 break;
1702 }
1703 }
1704 }
1705}
1706
1707/*----------------------------------------------------------------------------+
1708 | force_bup_core_selection.
1709 +----------------------------------------------------------------------------*/
1710void force_bup_core_selection(core_selection_t *core_select_P, config_validity_t *config_val_P)
1711{
1712 /* Pointer invalid */
1713 if (core_select_P == NULL)
1714 {
1715 printf("Configuration invalid pointer 1\n");
1716 for (;;)
1717 ;
1718 }
1719
1720 /* L4 Selection */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001721 *(core_select_P+UART_CORE0) = CORE_SELECTED;
1722 *(core_select_P+UART_CORE1) = CORE_SELECTED;
1723 *(core_select_P+UART_CORE2) = CORE_SELECTED;
1724 *(core_select_P+UART_CORE3) = CORE_SELECTED;
Stefan Roese17f50f222005-08-04 17:09:16 +02001725
1726 /* RMII Selection */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001727 *(core_select_P+RMII_SEL) = CORE_SELECTED;
Stefan Roese17f50f222005-08-04 17:09:16 +02001728
1729 /* External Interrupt 0-9 selection */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001730 *(core_select_P+UIC_0_3) = CORE_SELECTED;
1731 *(core_select_P+UIC_4_9) = CORE_SELECTED;
Stefan Roese17f50f222005-08-04 17:09:16 +02001732
Stefan Roesec57c7982005-08-11 17:56:56 +02001733 *(core_select_P+SCP_CORE) = CORE_SELECTED;
1734 *(core_select_P+DMA_CHANNEL_CD) = CORE_SELECTED;
1735 *(core_select_P+PACKET_REJ_FUNC_AVAIL) = CORE_SELECTED;
Wolfgang Denkf901a832005-08-06 01:42:58 +02001736 *(core_select_P+USB1_DEVICE) = CORE_SELECTED;
Stefan Roese17f50f222005-08-04 17:09:16 +02001737
Stefan Roesec57c7982005-08-11 17:56:56 +02001738 if (is_nand_selected()) {
1739 *(core_select_P+NAND_FLASH) = CORE_SELECTED;
1740 }
1741
Stefan Roese17f50f222005-08-04 17:09:16 +02001742 *config_val_P = CONFIG_IS_VALID;
1743
1744}
1745
1746/*----------------------------------------------------------------------------+
1747 | configure_ppc440ep_pins.
1748 +----------------------------------------------------------------------------*/
1749void configure_ppc440ep_pins(void)
1750{
1751 uart_config_nb_t uart_configuration;
1752 config_validity_t config_val = CONFIG_IS_INVALID;
1753
1754 /* Create Core Selection Table */
1755 core_selection_t ppc440ep_core_selection[MAX_CORE_SELECT_NB] =
1756 {
Wolfgang Denkf901a832005-08-06 01:42:58 +02001757 CORE_NOT_SELECTED, /* IIC_CORE, */
1758 CORE_NOT_SELECTED, /* SPC_CORE, */
1759 CORE_NOT_SELECTED, /* DMA_CHANNEL_AB, */
1760 CORE_NOT_SELECTED, /* UIC_4_9, */
1761 CORE_NOT_SELECTED, /* USB2_HOST, */
1762 CORE_NOT_SELECTED, /* DMA_CHANNEL_CD, */
1763 CORE_NOT_SELECTED, /* USB2_DEVICE, */
1764 CORE_NOT_SELECTED, /* PACKET_REJ_FUNC_AVAIL, */
1765 CORE_NOT_SELECTED, /* USB1_DEVICE, */
1766 CORE_NOT_SELECTED, /* EBC_MASTER, */
1767 CORE_NOT_SELECTED, /* NAND_FLASH, */
1768 CORE_NOT_SELECTED, /* UART_CORE0, */
1769 CORE_NOT_SELECTED, /* UART_CORE1, */
1770 CORE_NOT_SELECTED, /* UART_CORE2, */
1771 CORE_NOT_SELECTED, /* UART_CORE3, */
1772 CORE_NOT_SELECTED, /* MII_SEL, */
1773 CORE_NOT_SELECTED, /* RMII_SEL, */
1774 CORE_NOT_SELECTED, /* SMII_SEL, */
1775 CORE_NOT_SELECTED, /* PACKET_REJ_FUNC_EN */
1776 CORE_NOT_SELECTED, /* UIC_0_3 */
1777 CORE_NOT_SELECTED, /* USB1_HOST */
1778 CORE_NOT_SELECTED /* PCI_PATCH */
Stefan Roese17f50f222005-08-04 17:09:16 +02001779 };
1780
1781
1782 /* Table Default Initialisation + FPGA Access */
1783 init_default_gpio();
1784 set_chip_gpio_configuration(GPIO0);
1785 set_chip_gpio_configuration(GPIO1);
1786
1787 /* Update Table */
1788 force_bup_core_selection(ppc440ep_core_selection, &config_val);
1789#if 0 /* test-only */
1790 /* If we are running PIBS 1, force known configuration */
1791 update_core_selection_table(ppc440ep_core_selection, &config_val);
1792#endif
1793
1794 /*----------------------------------------------------------------------------+
1795 | SDR + ios table update + fpga initialization
1796 +----------------------------------------------------------------------------*/
Wolfgang Denkf901a832005-08-06 01:42:58 +02001797 unsigned long sdr0_pfc1 = 0;
1798 unsigned long sdr0_usb0 = 0;
1799 unsigned long sdr0_mfr = 0;
Stefan Roese17f50f222005-08-04 17:09:16 +02001800
1801 /* PCI Always selected */
1802
1803 /* I2C Selection */
1804 if (ppc440ep_core_selection[IIC_CORE] == CORE_SELECTED)
1805 {
1806 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL;
1807 iic1_selection_in_fpga();
1808 }
1809
1810 /* SCP Selection */
1811 if (ppc440ep_core_selection[SCP_CORE] == CORE_SELECTED)
1812 {
1813 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL;
1814 scp_selection_in_fpga();
1815 }
1816
1817 /* UIC 0:3 Selection */
1818 if (ppc440ep_core_selection[UIC_0_3] == CORE_SELECTED)
1819 {
1820 update_uic_0_3_irq_ios();
1821 dma_a_b_unselect_in_fpga();
1822 }
1823
1824 /* UIC 4:9 Selection */
1825 if (ppc440ep_core_selection[UIC_4_9] == CORE_SELECTED)
1826 {
1827 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_DIS_MASK) | SDR0_PFC1_DIS_UICIRQ5_SEL;
1828 update_uic_4_9_irq_ios();
1829 }
1830
1831 /* DMA AB Selection */
1832 if (ppc440ep_core_selection[DMA_CHANNEL_AB] == CORE_SELECTED)
1833 {
1834 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_DIS_MASK) | SDR0_PFC1_DIS_DMAR_SEL;
1835 update_dma_a_b_ios();
1836 dma_a_b_selection_in_fpga();
1837 }
1838
1839 /* DMA CD Selection */
1840 if (ppc440ep_core_selection[DMA_CHANNEL_CD] == CORE_SELECTED)
1841 {
1842 update_dma_c_d_ios();
1843 dma_c_d_selection_in_fpga();
1844 }
1845
1846 /* EBC Master Selection */
1847 if (ppc440ep_core_selection[EBC_MASTER] == CORE_SELECTED)
1848 {
1849 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_ERE_MASK) | SDR0_PFC1_ERE_EXTR_SEL;
1850 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_EBCHR_SEL;
1851 update_ebc_master_ios();
1852 }
1853
1854 /* PCI Patch Enable */
1855 if (ppc440ep_core_selection[PCI_PATCH] == CORE_SELECTED)
1856 {
1857 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_EBCHR_SEL;
1858 update_pci_patch_ios();
1859 }
1860
1861 /* USB2 Host Selection - Not Implemented in PowerPC 440EP Pass1 */
1862 if (ppc440ep_core_selection[USB2_HOST] == CORE_SELECTED)
1863 {
1864 /* Not Implemented in PowerPC 440EP Pass1-Pass2 */
1865 printf("Invalid configuration => USB2 Host selected\n");
1866 for (;;)
1867 ;
1868 /*usb2_host_selection_in_fpga(); */
1869 }
1870
1871 /* USB2.0 Device Selection */
1872 if (ppc440ep_core_selection[USB2_DEVICE] == CORE_SELECTED)
1873 {
1874 update_usb2_device_ios();
1875 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_USB2D_SEL;
1876 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UPR_MASK) | SDR0_PFC1_UPR_DISABLE;
1877
1878 mfsdr(sdr_usb0, sdr0_usb0);
1879 sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_USB_DEVSEL_MASK;
1880 sdr0_usb0 = sdr0_usb0 | SDR0_USB0_USB20D_DEVSEL;
1881 mtsdr(sdr_usb0, sdr0_usb0);
1882
1883 usb2_device_selection_in_fpga();
1884 }
1885
1886 /* USB1.1 Device Selection */
1887 if (ppc440ep_core_selection[USB1_DEVICE] == CORE_SELECTED)
1888 {
1889 mfsdr(sdr_usb0, sdr0_usb0);
1890 sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_USB_DEVSEL_MASK;
1891 sdr0_usb0 = sdr0_usb0 | SDR0_USB0_USB11D_DEVSEL;
1892 mtsdr(sdr_usb0, sdr0_usb0);
1893 }
1894
1895 /* USB1.1 Host Selection */
1896 if (ppc440ep_core_selection[USB1_HOST] == CORE_SELECTED)
1897 {
1898 mfsdr(sdr_usb0, sdr0_usb0);
1899 sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_LEEN_MASK;
1900 sdr0_usb0 = sdr0_usb0 | SDR0_USB0_LEEN_ENABLE;
1901 mtsdr(sdr_usb0, sdr0_usb0);
1902 }
1903
1904 /* NAND Flash Selection */
1905 if (ppc440ep_core_selection[NAND_FLASH] == CORE_SELECTED)
1906 {
1907 update_ndfc_ios();
1908
Stefan Roesea471db02007-06-01 15:19:29 +02001909#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL))
Stefan Roese17f50f222005-08-04 17:09:16 +02001910 mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL |
Wolfgang Denkf901a832005-08-06 01:42:58 +02001911 SDR0_CUST0_NDFC_ENABLE |
1912 SDR0_CUST0_NDFC_BW_8_BIT |
1913 SDR0_CUST0_NDFC_ARE_MASK |
Stefan Roesec57c7982005-08-11 17:56:56 +02001914 SDR0_CUST0_CHIPSELGAT_EN1 |
1915 SDR0_CUST0_CHIPSELGAT_EN2);
Stefan Roesea471db02007-06-01 15:19:29 +02001916#else
1917 mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL |
1918 SDR0_CUST0_NDFC_ENABLE |
1919 SDR0_CUST0_NDFC_BW_8_BIT |
1920 SDR0_CUST0_NDFC_ARE_MASK |
1921 SDR0_CUST0_CHIPSELGAT_EN0 |
1922 SDR0_CUST0_CHIPSELGAT_EN2);
1923#endif
Stefan Roese17f50f222005-08-04 17:09:16 +02001924
1925 ndfc_selection_in_fpga();
1926 }
1927 else
1928 {
1929 /* Set Mux on EMAC */
1930 mtsdr(sdr_cust0, SDR0_CUST0_MUX_EMAC_SEL);
1931 }
1932
1933 /* MII Selection */
1934 if (ppc440ep_core_selection[MII_SEL] == CORE_SELECTED)
1935 {
1936 update_zii_ios();
1937 mfsdr(sdr_mfr, sdr0_mfr);
1938 sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_MII;
1939 mtsdr(sdr_mfr, sdr0_mfr);
1940
1941 set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_MII);
1942 }
1943
1944 /* RMII Selection */
1945 if (ppc440ep_core_selection[RMII_SEL] == CORE_SELECTED)
1946 {
1947 update_zii_ios();
1948 mfsdr(sdr_mfr, sdr0_mfr);
1949 sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M;
1950 mtsdr(sdr_mfr, sdr0_mfr);
1951
1952 set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_RMII);
1953 }
1954
1955 /* SMII Selection */
1956 if (ppc440ep_core_selection[SMII_SEL] == CORE_SELECTED)
1957 {
1958 update_zii_ios();
1959 mfsdr(sdr_mfr, sdr0_mfr);
1960 sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_SMII;
1961 mtsdr(sdr_mfr, sdr0_mfr);
1962
1963 set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_SMII);
1964 }
1965
1966 /* UART Selection */
1967 uart_configuration = get_uart_configuration();
1968 switch (uart_configuration)
1969 {
Wolfgang Denkf901a832005-08-06 01:42:58 +02001970 case L1: /* L1 Selection */
Stefan Roese17f50f222005-08-04 17:09:16 +02001971 /* UART0 8 pins Only */
1972 /*sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_DSR_DTR; */
Wolfgang Denkf901a832005-08-06 01:42:58 +02001973 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) |SDR0_PFC1_U0ME_CTS_RTS; /* Chip Pb */
Stefan Roese17f50f222005-08-04 17:09:16 +02001974 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_8PINS;
1975 break;
Wolfgang Denkf901a832005-08-06 01:42:58 +02001976 case L2: /* L2 Selection */
Stefan Roese17f50f222005-08-04 17:09:16 +02001977 /* UART0 and UART1 4 pins */
1978 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR;
1979 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS;
1980 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR;
1981 break;
Wolfgang Denkf901a832005-08-06 01:42:58 +02001982 case L3: /* L3 Selection */
Stefan Roese17f50f222005-08-04 17:09:16 +02001983 /* UART0 4 pins, UART1 and UART2 2 pins */
1984 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR;
1985 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS;
1986 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR;
1987 break;
Wolfgang Denkf901a832005-08-06 01:42:58 +02001988 case L4: /* L4 Selection */
Stefan Roese17f50f222005-08-04 17:09:16 +02001989 /* UART0, UART1, UART2 and UART3 2 pins */
1990 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_DSR_DTR;
1991 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS;
1992 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR;
1993 break;
1994 }
1995 update_uart_ios(uart_configuration);
1996
1997 /* UART Selection in all cases */
1998 uart_selection_in_fpga(uart_configuration);
1999
2000 /* Packet Reject Function Available */
2001 if (ppc440ep_core_selection[PACKET_REJ_FUNC_AVAIL] == CORE_SELECTED)
2002 {
2003 /* Set UPR Bit in SDR0_PFC1 Register */
2004 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UPR_MASK) | SDR0_PFC1_UPR_ENABLE;
2005 }
2006
2007 /* Packet Reject Function Enable */
2008 if (ppc440ep_core_selection[PACKET_REJ_FUNC_EN] == CORE_SELECTED)
2009 {
2010 mfsdr(sdr_mfr, sdr0_mfr);
2011 sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_PKT_REJ_MASK) | SDR0_MFR_PKT_REJ_EN;;
2012 mtsdr(sdr_mfr, sdr0_mfr);
2013 }
2014
2015 /* Perform effective access to hardware */
2016 mtsdr(sdr_pfc1, sdr0_pfc1);
2017 set_chip_gpio_configuration(GPIO0);
2018 set_chip_gpio_configuration(GPIO1);
2019
2020 /* USB2.0 Device Reset must be done after GPIO setting */
2021 if (ppc440ep_core_selection[USB2_DEVICE] == CORE_SELECTED)
2022 usb2_device_reset_through_fpga();
2023
2024}