Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / 6dc5b6b1ff030a811d1747c19009d9f3b0908099 / . / arch / arm / dts / zynqmp-zcu102.dts
blob: de9960245664734ef4b24be0d6f4f7b0b05935e5 [file] [log] [blame]
Michal Simek1f4f3d32016-04-07 15:58:23 +0200[diff] [blame]1/*
2 * dts file for Xilinx ZynqMP ZCU102
3 *
4 * (C) Copyright 2015, Xilinx, Inc.
5 *
6 * Michal Simek <michal.simek@xilinx.com>
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11/dts-v1/;
12
13#include "zynqmp.dtsi"
14#include "zynqmp-clk.dtsi"
15
16/ {
17 model = "ZynqMP ZCU102 RevA";
18 compatible = "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
19
20 aliases {
21 ethernet0 = &gem3;
22 gpio0 = &gpio;
23 i2c0 = &i2c0;
24 i2c1 = &i2c1;
25 mmc0 = &sdhci1;
26 rtc0 = &rtc;
27 serial0 = &uart0;
28 serial1 = &uart1;
29 spi0 = &qspi;
30 usb0 = &usb0;
31 };
32
33 chosen {
34 bootargs = "earlycon";
35 stdout-path = "serial0:115200n8";
36 };
37
38 memory {
39 device_type = "memory";
40 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
41 };
42};
43
44&can1 {
45 status = "okay";
46};
47
48/* fpd_dma clk 667MHz, lpd_dma 500MHz */
49&fpd_dma_chan1 {
50 status = "okay";
51 xlnx,include-sg; /* for testing purpose */
52 xlnx,overfetch; /* for testing purpose */
53 xlnx,ratectrl = <0>; /* for testing purpose */
54 xlnx,src-issue = <31>;
55};
56
57&fpd_dma_chan2 {
58 status = "okay";
59 xlnx,ratectrl = <100>; /* for testing purpose */
60 xlnx,src-issue = <4>; /* for testing purpose */
61};
62
63&fpd_dma_chan3 {
64 status = "okay";
65};
66
67&fpd_dma_chan4 {
68 status = "okay";
69 xlnx,include-sg; /* for testing purpose */
70};
71
72&fpd_dma_chan5 {
73 status = "okay";
74};
75
76&fpd_dma_chan6 {
77 status = "okay";
78 xlnx,include-sg; /* for testing purpose */
79};
80
81&fpd_dma_chan7 {
82 status = "okay";
83};
84
85&fpd_dma_chan8 {
86 status = "okay";
87 xlnx,include-sg; /* for testing purpose */
88};
89
90&gem3 {
91 status = "okay";
92 local-mac-address = [00 0a 35 00 02 90];
93 phy-handle = <&phy0>;
94 phy-mode = "rgmii-id";
95 phy0: phy@21 {
96 reg = <21>;
97 ti,rx-internal-delay = <0x8>;
98 ti,tx-internal-delay = <0xa>;
99 ti,fifo-depth = <0x1>;
100 };
101};
102
103&gpio {
104 status = "okay";
105};
106
107&gpu {
108 status = "okay";
109};
110
111&i2c0 {
112 status = "okay";
113 clock-frequency = <400000>;
114
115 tca6416_u97: gpio@20 {
116 /*
117 * Enable all GTs to out from U-Boot
118 * i2c mw 20 6 0 - setup IO to output
119 * i2c mw 20 2 ef - setup output values on pins 0-7
120 * i2c mw 20 3 ff - setup output values on pins 10-17
121 */
122 compatible = "ti,tca6416";
123 reg = <0x20>;
124 gpio-controller;
125 #gpio-cells = <2>;
126 /*
127 * IRQ not connected
128 * Lines:
129 * 0 - PS_GTR_LAN_SEL0
130 * 1 - PS_GTR_LAN_SEL1
131 * 2 - PS_GTR_LAN_SEL2
132 * 3 - PS_GTR_LAN_SEL3
133 * 4 - PCI_CLK_DIR_SEL
134 * 5 - IIC_MUX_RESET_B
135 * 6 - GEM3_EXP_RESET_B
136 * 7, 10 - 17 - not connected
137 */
138
139 gtr_sel0 {
140 gpio-hog;
141 gpios = <0 0>;
142 output-high; /* PCIE = 0, DP = 1 */
143 line-name = "sel0";
144 };
145 gtr_sel1 {
146 gpio-hog;
147 gpios = <1 0>;
148 output-high; /* PCIE = 0, DP = 1 */
149 line-name = "sel1";
150 };
151 gtr_sel2 {
152 gpio-hog;
153 gpios = <2 0>;
154 output-high; /* PCIE = 0, USB0 = 1 */
155 line-name = "sel2";
156 };
157 gtr_sel3 {
158 gpio-hog;
159 gpios = <3 0>;
160 output-high; /* PCIE = 0, SATA = 1 */
161 line-name = "sel3";
162 };
163 };
164
165 tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
166 compatible = "ti,tca6416";
167 reg = <0x21>;
168 gpio-controller;
169 #gpio-cells = <2>;
170 /*
171 * IRQ not connected
172 * Lines:
173 * 0 - VCCPSPLL_EN
174 * 1 - MGTRAVCC_EN
175 * 2 - MGTRAVTT_EN
176 * 3 - VCCPSDDRPLL_EN
177 * 4 - MIO26_PMU_INPUT_LS
178 * 5 - PL_PMBUS_ALERT
179 * 6 - PS_PMBUS_ALERT
180 * 7 - MAXIM_PMBUS_ALERT
181 * 10 - PL_DDR4_VTERM_EN
182 * 11 - PL_DDR4_VPP_2V5_EN
183 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
184 * 13 - PS_DIMM_SUSPEND_EN
185 * 14 - PS_DDR4_VTERM_EN
186 * 15 - PS_DDR4_VPP_2V5_EN
187 * 16 - 17 - not connected
188 */
189 };
190
191 i2cswitch@75 { /* u60 */
192 compatible = "nxp,pca9544";
193 #address-cells = <1>;
194 #size-cells = <0>;
195 reg = <0x75>;
196 i2c@0 { /* i2c mw 75 0 1 */
197 #address-cells = <1>;
198 #size-cells = <0>;
199 reg = <0>;
200 /* PS_PMBUS */
201 ina226@40 { /* u76 */
202 compatible = "ti,ina226";
203 reg = <0x40>;
204 shunt-resistor = <5000>;
205 };
206 ina226@41 { /* u77 */
207 compatible = "ti,ina226";
208 reg = <0x41>;
209 shunt-resistor = <5000>;
210 };
211 ina226@42 { /* u78 */
212 compatible = "ti,ina226";
213 reg = <0x42>;
214 shunt-resistor = <5000>;
215 };
216 ina226@43 { /* u87 */
217 compatible = "ti,ina226";
218 reg = <0x43>;
219 shunt-resistor = <5000>;
220 };
221 ina226@44 { /* u85 */
222 compatible = "ti,ina226";
223 reg = <0x44>;
224 shunt-resistor = <5000>;
225 };
226 ina226@45 { /* u86 */
227 compatible = "ti,ina226";
228 reg = <0x45>;
229 shunt-resistor = <5000>;
230 };
231 ina226@46 { /* u93 */
232 compatible = "ti,ina226";
233 reg = <0x46>;
234 shunt-resistor = <5000>;
235 };
236 ina226@47 { /* u88 */
237 compatible = "ti,ina226";
238 reg = <0x47>;
239 shunt-resistor = <5000>;
240 };
241 ina226@4a { /* u15 */
242 compatible = "ti,ina226";
243 reg = <0x4a>;
244 shunt-resistor = <5000>;
245 };
246 ina226@4b { /* u92 */
247 compatible = "ti,ina226";
248 reg = <0x4b>;
249 shunt-resistor = <5000>;
250 };
251 };
252 i2c@1 { /* i2c mw 75 0 1 */
253 #address-cells = <1>;
254 #size-cells = <0>;
255 reg = <1>;
256 /* PL_PMBUS */
257 ina226@40 { /* u79 */
258 compatible = "ti,ina226";
259 reg = <0x40>;
260 shunt-resistor = <2000>;
261 };
262 ina226@41 { /* u81 */
263 compatible = "ti,ina226";
264 reg = <0x41>;
265 shunt-resistor = <5000>;
266 };
267 ina226@42 { /* u80 */
268 compatible = "ti,ina226";
269 reg = <0x42>;
270 shunt-resistor = <5000>;
271 };
272 ina226@43 { /* u84 */
273 compatible = "ti,ina226";
274 reg = <0x43>;
275 shunt-resistor = <5000>;
276 };
277 ina226@44 { /* u16 */
278 compatible = "ti,ina226";
279 reg = <0x44>;
280 shunt-resistor = <5000>;
281 };
282 ina226@45 { /* u65 */
283 compatible = "ti,ina226";
284 reg = <0x45>;
285 shunt-resistor = <5000>;
286 };
287 ina226@46 { /* u74 */
288 compatible = "ti,ina226";
289 reg = <0x46>;
290 shunt-resistor = <5000>;
291 };
292 ina226@47 { /* u75 */
293 compatible = "ti,ina226";
294 reg = <0x47>;
295 shunt-resistor = <5000>;
296 };
297 };
298 i2c@2 { /* i2c mw 75 0 1 */
299 #address-cells = <1>;
300 #size-cells = <0>;
301 reg = <2>;
302 /* MAXIM_PMBUS - 00 */
303 max15301@a { /* u46 */
304 compatible = "max15301";
305 reg = <0xa>;
306 };
307 max15303@b { /* u4 */
308 compatible = "max15303";
309 reg = <0xb>;
310 };
311 max15303@10 { /* u13 */
312 compatible = "max15303";
313 reg = <0x10>;
314 };
315 max15301@13 { /* u47 */
316 compatible = "max15301";
317 reg = <0x13>;
318 };
319 max15303@14 { /* u7 */
320 compatible = "max15303";
321 reg = <0x14>;
322 };
323 max15303@15 { /* u6 */
324 compatible = "max15303";
325 reg = <0x15>;
326 };
327 max15303@16 { /* u10 */
328 compatible = "max15303";
329 reg = <0x16>;
330 };
331 max15303@17 { /* u9 */
332 compatible = "max15303";
333 reg = <0x17>;
334 };
335 max15301@18 { /* u63 */
336 compatible = "max15301";
337 reg = <0x18>;
338 };
339 max15303@1a { /* u49 */
340 compatible = "max15303";
341 reg = <0x1a>;
342 };
343 max15303@1d { /* u18 */
344 compatible = "max15303";
345 reg = <0x1d>;
346 };
347 max15303@20 { /* u8 */
348 compatible = "max15303";
349 status = "disabled"; /* unreachable */
350 reg = <0x20>;
351 };
352
353/* drivers/hwmon/pmbus/Kconfig:86: be called max20751.
354drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
355*/
356 max20751@72 { /* u95 FIXME - not detected */
357 compatible = "max20751";
358 reg = <0x72>;
359 };
360 max20751@73 { /* u96 FIXME - not detected */
361 compatible = "max20751";
362 reg = <0x73>;
363 };
364 };
365 /* Bus 3 is not connected */
366 };
367
368 /* FIXME PL connection - u55 , PMOD - j160 */
369 /* FIXME MSP430F - u41 - not detected */
370};
371
372&i2c1 {
373 status = "okay";
374 clock-frequency = <400000>;
375 /* FIXME PL i2c via PCA9306 - u45 */
376 /* FIXME MSP430 - u41 - not detected */
377 i2cswitch@74 { /* u34 */
378 compatible = "nxp,pca9548";
379 #address-cells = <1>;
380 #size-cells = <0>;
381 reg = <0x74>;
382 i2c@0 { /* i2c mw 74 0 1 */
383 #address-cells = <1>;
384 #size-cells = <0>;
385 reg = <0>;
386 /*
387 * IIC_EEPROM 1kB memory which uses 256B blocks
388 * where every block has different address.
389 * 0 - 256B address 0x54
390 * 256B - 512B address 0x55
391 * 512B - 768B address 0x56
392 * 768B - 1024B address 0x57
393 */
394 eeprom@54 { /* u23 */
395 compatible = "at,24c08";
396 reg = <0x54>;
397 };
398 };
399 i2c@1 { /* i2c mw 74 0 2 */
400 #address-cells = <1>;
401 #size-cells = <0>;
402 reg = <1>;
403 si5341: clock-generator1@36 { /* SI5341 - u69 */
404 compatible = "si5341";
405 reg = <0x36>;
406 };
407
408 };
409 i2c@2 { /* i2c mw 74 0 4 */
410 #address-cells = <1>;
411 #size-cells = <0>;
412 reg = <2>;
413 si570_1: clock-generator2@5d { /* USER SI570 - u42 */
414 #clock-cells = <0>;
415 compatible = "silabs,si570";
416 reg = <0x5d>;
417 temperature-stability = <50>;
418 factory-fout = <300000000>;
419 clock-frequency = <300000000>;
420 };
421 };
422 i2c@3 { /* i2c mw 74 0 8 */
423 #address-cells = <1>;
424 #size-cells = <0>;
425 reg = <3>;
426 si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */
427 #clock-cells = <0>;
428 compatible = "silabs,si570";
429 reg = <0x5d>;
430 temperature-stability = <50>; /* copy from zc702 */
431 factory-fout = <156250000>;
432 clock-frequency = <148500000>;
433 };
434 };
435 i2c@4 { /* i2c mw 74 0 10 */
436 #address-cells = <1>;
437 #size-cells = <0>;
438 reg = <4>;
439 si5328: clock-generator4@69 {/* SI5328 - u20 */
440 compatible = "silabs,si5328";
441 reg = <0x69>;
442 };
443 };
444 /* 5 - 7 unconnected */
445 };
446
447 i2cswitch@75 {
448 compatible = "nxp,pca9548"; /* u135 */
449 #address-cells = <1>;
450 #size-cells = <0>;
451 reg = <0x75>;
452
453 i2c@0 {
454 #address-cells = <1>;
455 #size-cells = <0>;
456 reg = <0>;
457 /* HPC0_IIC */
458 };
459 i2c@1 {
460 #address-cells = <1>;
461 #size-cells = <0>;
462 reg = <1>;
463 /* HPC1_IIC */
464 };
465 i2c@2 {
466 #address-cells = <1>;
467 #size-cells = <0>;
468 reg = <2>;
469 /* SYSMON */
470 };
471 i2c@3 { /* i2c mw 75 0 8 */
472 #address-cells = <1>;
473 #size-cells = <0>;
474 reg = <3>;
475 /* DDR4 SODIMM */
476 dev@19 { /* u-boot detection */
477 compatible = "xxx";
478 reg = <0x19>;
479 };
480 dev@30 { /* u-boot detection */
481 compatible = "xxx";
482 reg = <0x30>;
483 };
484 dev@35 { /* u-boot detection */
485 compatible = "xxx";
486 reg = <0x35>;
487 };
488 dev@36 { /* u-boot detection */
489 compatible = "xxx";
490 reg = <0x36>;
491 };
492 dev@51 { /* u-boot detection - maybe SPD */
493 compatible = "xxx";
494 reg = <0x51>;
495 };
496 };
497 i2c@4 {
498 #address-cells = <1>;
499 #size-cells = <0>;
500 reg = <4>;
501 /* SEP 3 */
502 };
503 i2c@5 {
504 #address-cells = <1>;
505 #size-cells = <0>;
506 reg = <5>;
507 /* SEP 2 */
508 };
509 i2c@6 {
510 #address-cells = <1>;
511 #size-cells = <0>;
512 reg = <6>;
513 /* SEP 1 */
514 };
515 i2c@7 {
516 #address-cells = <1>;
517 #size-cells = <0>;
518 reg = <7>;
519 /* SEP 0 */
520 };
521 };
522};
523
524&pcie {
525/* status = "okay"; */
526};
527
528&qspi {
529 status = "okay";
530 is-dual = <1>;
531 flash@0 {
532 compatible = "m25p80"; /* 32MB */
533 #address-cells = <1>;
534 #size-cells = <1>;
535 reg = <0x0>;
536 spi-tx-bus-width = <1>;
537 spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
538 spi-max-frequency = <108000000>; /* Based on DC1 spec */
539 partition@qspi-fsbl-uboot { /* for testing purpose */
540 label = "qspi-fsbl-uboot";
541 reg = <0x0 0x100000>;
542 };
543 partition@qspi-linux { /* for testing purpose */
544 label = "qspi-linux";
545 reg = <0x100000 0x500000>;
546 };
547 partition@qspi-device-tree { /* for testing purpose */
548 label = "qspi-device-tree";
549 reg = <0x600000 0x20000>;
550 };
551 partition@qspi-rootfs { /* for testing purpose */
552 label = "qspi-rootfs";
553 reg = <0x620000 0x5E0000>;
554 };
555 };
556};
557
558&rtc {
559 status = "okay";
560};
561
562&sata {
563 status = "okay";
564 /* SATA OOB timing settings */
565 ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
566 ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
567 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
568 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
569 ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
570 ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
571 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
572 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
573};
574
575/* SD1 with level shifter */
576&sdhci1 {
577 status = "okay";
578 no-1-8-v; /* for 1.0 silicon */
579};
580
581&uart0 {
582 status = "okay";
583};
584
585&uart1 {
586 status = "okay";
587};
588
589/* ULPI SMSC USB3320 */
590&usb0 {
591 status = "okay";
592};
593
594&dwc3_0 {
595 status = "okay";
596 dr_mode = "host";
597};
598
599&xilinx_drm {
600 status = "okay";
601 clocks = <&si570_1>;
602};
603
604&xlnx_dp {
605 status = "okay";
606};
607
608&xlnx_dp_sub {
609 status = "okay";
610 xlnx,vid-clk-pl;
611};
612
613&xlnx_dp_snd_pcm0 {
614 status = "okay";
615};
616
617&xlnx_dp_snd_pcm1 {
618 status = "okay";
619};
620
621&xlnx_dp_snd_card {
622 status = "okay";
623};
624
625&xlnx_dp_snd_codec0 {
626 status = "okay";
627};
628
629&xlnx_dpdma {
630 status = "okay";
631};