Anton Schubert | 9c28d61 | 2015-08-11 11:54:01 +0200 | [diff] [blame] | 1 | /* |
| 2 | * PCIe driver for Marvell MVEBU SoCs |
| 3 | * |
| 4 | * Based on Barebox drivers/pci/pci-mvebu.c |
| 5 | * |
| 6 | * Ported to U-Boot by: |
| 7 | * Anton Schubert <anton.schubert@gmx.de> |
| 8 | * Stefan Roese <sr@denx.de> |
| 9 | * |
| 10 | * SPDX-License-Identifier: GPL-2.0 |
| 11 | */ |
| 12 | |
| 13 | #include <common.h> |
| 14 | #include <pci.h> |
| 15 | #include <asm/errno.h> |
| 16 | #include <asm/io.h> |
| 17 | #include <asm/arch/cpu.h> |
| 18 | #include <asm/arch/soc.h> |
| 19 | #include <linux/mbus.h> |
| 20 | |
| 21 | DECLARE_GLOBAL_DATA_PTR; |
| 22 | |
| 23 | /* PCIe unit register offsets */ |
| 24 | #define SELECT(x, n) ((x >> n) & 1UL) |
| 25 | |
| 26 | #define PCIE_DEV_ID_OFF 0x0000 |
| 27 | #define PCIE_CMD_OFF 0x0004 |
| 28 | #define PCIE_DEV_REV_OFF 0x0008 |
| 29 | #define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) |
| 30 | #define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) |
| 31 | #define PCIE_CAPAB_OFF 0x0060 |
| 32 | #define PCIE_CTRL_STAT_OFF 0x0068 |
| 33 | #define PCIE_HEADER_LOG_4_OFF 0x0128 |
| 34 | #define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4)) |
| 35 | #define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) |
| 36 | #define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) |
| 37 | #define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) |
| 38 | #define PCIE_WIN5_CTRL_OFF 0x1880 |
| 39 | #define PCIE_WIN5_BASE_OFF 0x1884 |
| 40 | #define PCIE_WIN5_REMAP_OFF 0x188c |
| 41 | #define PCIE_CONF_ADDR_OFF 0x18f8 |
| 42 | #define PCIE_CONF_ADDR_EN BIT(31) |
| 43 | #define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) |
| 44 | #define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) |
| 45 | #define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) |
| 46 | #define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8) |
| 47 | #define PCIE_CONF_ADDR(dev, reg) \ |
| 48 | (PCIE_CONF_BUS(PCI_BUS(dev)) | PCIE_CONF_DEV(PCI_DEV(dev)) | \ |
| 49 | PCIE_CONF_FUNC(PCI_FUNC(dev)) | PCIE_CONF_REG(reg) | \ |
| 50 | PCIE_CONF_ADDR_EN) |
| 51 | #define PCIE_CONF_DATA_OFF 0x18fc |
| 52 | #define PCIE_MASK_OFF 0x1910 |
| 53 | #define PCIE_MASK_ENABLE_INTS (0xf << 24) |
| 54 | #define PCIE_CTRL_OFF 0x1a00 |
| 55 | #define PCIE_CTRL_X1_MODE BIT(0) |
| 56 | #define PCIE_STAT_OFF 0x1a04 |
| 57 | #define PCIE_STAT_BUS (0xff << 8) |
| 58 | #define PCIE_STAT_DEV (0x1f << 16) |
| 59 | #define PCIE_STAT_LINK_DOWN BIT(0) |
| 60 | #define PCIE_DEBUG_CTRL 0x1a60 |
| 61 | #define PCIE_DEBUG_SOFT_RESET BIT(20) |
| 62 | |
| 63 | struct resource { |
| 64 | u32 start; |
| 65 | u32 end; |
| 66 | }; |
| 67 | |
| 68 | struct mvebu_pcie { |
| 69 | struct pci_controller hose; |
| 70 | char *name; |
| 71 | void __iomem *base; |
| 72 | void __iomem *membase; |
| 73 | struct resource mem; |
| 74 | void __iomem *iobase; |
| 75 | u32 port; |
| 76 | u32 lane; |
| 77 | u32 lane_mask; |
| 78 | pci_dev_t dev; |
| 79 | }; |
| 80 | |
| 81 | #define to_pcie(_hc) container_of(_hc, struct mvebu_pcie, pci) |
| 82 | |
| 83 | /* |
| 84 | * MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped |
| 85 | * into SoCs address space. Each controller will map 32M of MEM |
| 86 | * and 64K of I/O space when registered. |
| 87 | */ |
| 88 | static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE; |
| 89 | #define PCIE_MEM_SIZE (32 << 20) |
| 90 | |
| 91 | #if defined(CONFIG_ARMADA_38X) |
| 92 | #define PCIE_BASE(if) \ |
| 93 | ((if) == 0 ? \ |
| 94 | MVEBU_REG_PCIE_BASE + 0x40000 : \ |
| 95 | MVEBU_REG_PCIE_BASE + 0x4000 * (if)) |
| 96 | |
| 97 | /* |
| 98 | * On A38x MV6820 these PEX ports are supported: |
| 99 | * 0 - Port 0.0 |
| 100 | * 1 - Port 0.1 |
| 101 | * 2 - Port 0.2 |
| 102 | */ |
| 103 | #define MAX_PEX 3 |
| 104 | static struct mvebu_pcie pcie_bus[MAX_PEX]; |
| 105 | |
| 106 | static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx, |
| 107 | int *mem_target, int *mem_attr) |
| 108 | { |
| 109 | u8 port[] = { 0, 1, 2 }; |
| 110 | u8 lane[] = { 0, 0, 0 }; |
| 111 | u8 target[] = { 8, 4, 4 }; |
| 112 | u8 attr[] = { 0xe8, 0xe8, 0xd8 }; |
| 113 | |
| 114 | pcie->port = port[pex_idx]; |
| 115 | pcie->lane = lane[pex_idx]; |
| 116 | *mem_target = target[pex_idx]; |
| 117 | *mem_attr = attr[pex_idx]; |
| 118 | } |
| 119 | #else |
| 120 | #define PCIE_BASE(if) \ |
| 121 | ((if) < 8 ? \ |
| 122 | (MVEBU_REG_PCIE_BASE + ((if) / 4) * 0x40000 + ((if) % 4) * 0x4000) : \ |
| 123 | (MVEBU_REG_PCIE_BASE + 0x2000 + ((if) % 8) * 0x40000)) |
| 124 | |
| 125 | /* |
| 126 | * On AXP MV78460 these PEX ports are supported: |
| 127 | * 0 - Port 0.0 |
| 128 | * 1 - Port 0.1 |
| 129 | * 2 - Port 0.2 |
| 130 | * 3 - Port 0.3 |
| 131 | * 4 - Port 1.0 |
| 132 | * 5 - Port 1.1 |
| 133 | * 6 - Port 1.2 |
| 134 | * 7 - Port 1.3 |
| 135 | * 8 - Port 2.0 |
| 136 | * 9 - Port 3.0 |
| 137 | */ |
| 138 | #define MAX_PEX 10 |
| 139 | static struct mvebu_pcie pcie_bus[MAX_PEX]; |
| 140 | |
| 141 | static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx, |
| 142 | int *mem_target, int *mem_attr) |
| 143 | { |
| 144 | u8 port[] = { 0, 0, 0, 0, 1, 1, 1, 1, 2, 3 }; |
| 145 | u8 lane[] = { 0, 1, 2, 3, 0, 1, 2, 3, 0, 0 }; |
| 146 | u8 target[] = { 4, 4, 4, 4, 8, 8, 8, 8, 4, 8 }; |
| 147 | u8 attr[] = { 0xe8, 0xd8, 0xb8, 0x78, |
| 148 | 0xe8, 0xd8, 0xb8, 0x78, |
| 149 | 0xf8, 0xf8 }; |
| 150 | |
| 151 | pcie->port = port[pex_idx]; |
| 152 | pcie->lane = lane[pex_idx]; |
| 153 | *mem_target = target[pex_idx]; |
| 154 | *mem_attr = attr[pex_idx]; |
| 155 | } |
| 156 | #endif |
| 157 | |
| 158 | static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie) |
| 159 | { |
| 160 | u32 val; |
| 161 | val = readl(pcie->base + PCIE_STAT_OFF); |
| 162 | return !(val & PCIE_STAT_LINK_DOWN); |
| 163 | } |
| 164 | |
| 165 | static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie *pcie, int busno) |
| 166 | { |
| 167 | u32 stat; |
| 168 | |
| 169 | stat = readl(pcie->base + PCIE_STAT_OFF); |
| 170 | stat &= ~PCIE_STAT_BUS; |
| 171 | stat |= busno << 8; |
| 172 | writel(stat, pcie->base + PCIE_STAT_OFF); |
| 173 | } |
| 174 | |
| 175 | static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie *pcie, int devno) |
| 176 | { |
| 177 | u32 stat; |
| 178 | |
| 179 | stat = readl(pcie->base + PCIE_STAT_OFF); |
| 180 | stat &= ~PCIE_STAT_DEV; |
| 181 | stat |= devno << 16; |
| 182 | writel(stat, pcie->base + PCIE_STAT_OFF); |
| 183 | } |
| 184 | |
| 185 | static int mvebu_pcie_get_local_bus_nr(struct mvebu_pcie *pcie) |
| 186 | { |
| 187 | u32 stat; |
| 188 | |
| 189 | stat = readl(pcie->base + PCIE_STAT_OFF); |
| 190 | return (stat & PCIE_STAT_BUS) >> 8; |
| 191 | } |
| 192 | |
| 193 | static int mvebu_pcie_get_local_dev_nr(struct mvebu_pcie *pcie) |
| 194 | { |
| 195 | u32 stat; |
| 196 | |
| 197 | stat = readl(pcie->base + PCIE_STAT_OFF); |
| 198 | return (stat & PCIE_STAT_DEV) >> 16; |
| 199 | } |
| 200 | |
| 201 | static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose) |
| 202 | { |
| 203 | return container_of(hose, struct mvebu_pcie, hose); |
| 204 | } |
| 205 | |
| 206 | static int mvebu_pcie_read_config_dword(struct pci_controller *hose, |
| 207 | pci_dev_t dev, int offset, u32 *val) |
| 208 | { |
| 209 | struct mvebu_pcie *pcie = hose_to_pcie(hose); |
| 210 | int local_bus = PCI_BUS(pcie->dev); |
| 211 | int local_dev = PCI_DEV(pcie->dev); |
| 212 | u32 reg; |
| 213 | |
| 214 | /* Only allow one other device besides the local one on the local bus */ |
| 215 | if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) { |
| 216 | if (local_dev == 0 && PCI_DEV(dev) != 1) { |
| 217 | /* |
| 218 | * If local dev is 0, the first other dev can |
| 219 | * only be 1 |
| 220 | */ |
| 221 | *val = 0xffffffff; |
| 222 | return 1; |
| 223 | } else if (local_dev != 0 && PCI_DEV(dev) != 0) { |
| 224 | /* |
| 225 | * If local dev is not 0, the first other dev can |
| 226 | * only be 0 |
| 227 | */ |
| 228 | *val = 0xffffffff; |
| 229 | return 1; |
| 230 | } |
| 231 | } |
| 232 | |
| 233 | /* write address */ |
| 234 | reg = PCIE_CONF_ADDR(dev, offset); |
| 235 | writel(reg, pcie->base + PCIE_CONF_ADDR_OFF); |
| 236 | *val = readl(pcie->base + PCIE_CONF_DATA_OFF); |
| 237 | |
| 238 | return 0; |
| 239 | } |
| 240 | |
| 241 | static int mvebu_pcie_write_config_dword(struct pci_controller *hose, |
| 242 | pci_dev_t dev, int offset, u32 val) |
| 243 | { |
| 244 | struct mvebu_pcie *pcie = hose_to_pcie(hose); |
| 245 | int local_bus = PCI_BUS(pcie->dev); |
| 246 | int local_dev = PCI_DEV(pcie->dev); |
| 247 | |
| 248 | /* Only allow one other device besides the local one on the local bus */ |
| 249 | if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) { |
| 250 | if (local_dev == 0 && PCI_DEV(dev) != 1) { |
| 251 | /* |
| 252 | * If local dev is 0, the first other dev can |
| 253 | * only be 1 |
| 254 | */ |
| 255 | return 1; |
| 256 | } else if (local_dev != 0 && PCI_DEV(dev) != 0) { |
| 257 | /* |
| 258 | * If local dev is not 0, the first other dev can |
| 259 | * only be 0 |
| 260 | */ |
| 261 | return 1; |
| 262 | } |
| 263 | } |
| 264 | |
| 265 | writel(PCIE_CONF_ADDR(dev, offset), pcie->base + PCIE_CONF_ADDR_OFF); |
| 266 | writel(val, pcie->base + PCIE_CONF_DATA_OFF); |
| 267 | |
| 268 | return 0; |
| 269 | } |
| 270 | |
| 271 | /* |
| 272 | * Setup PCIE BARs and Address Decode Wins: |
| 273 | * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks |
| 274 | * WIN[0-3] -> DRAM bank[0-3] |
| 275 | */ |
| 276 | static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie) |
| 277 | { |
| 278 | const struct mbus_dram_target_info *dram = mvebu_mbus_dram_info(); |
| 279 | u32 size; |
| 280 | int i; |
| 281 | |
| 282 | /* First, disable and clear BARs and windows. */ |
| 283 | for (i = 1; i < 3; i++) { |
| 284 | writel(0, pcie->base + PCIE_BAR_CTRL_OFF(i)); |
| 285 | writel(0, pcie->base + PCIE_BAR_LO_OFF(i)); |
| 286 | writel(0, pcie->base + PCIE_BAR_HI_OFF(i)); |
| 287 | } |
| 288 | |
| 289 | for (i = 0; i < 5; i++) { |
| 290 | writel(0, pcie->base + PCIE_WIN04_CTRL_OFF(i)); |
| 291 | writel(0, pcie->base + PCIE_WIN04_BASE_OFF(i)); |
| 292 | writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i)); |
| 293 | } |
| 294 | |
| 295 | writel(0, pcie->base + PCIE_WIN5_CTRL_OFF); |
| 296 | writel(0, pcie->base + PCIE_WIN5_BASE_OFF); |
| 297 | writel(0, pcie->base + PCIE_WIN5_REMAP_OFF); |
| 298 | |
| 299 | /* Setup windows for DDR banks. Count total DDR size on the fly. */ |
| 300 | size = 0; |
| 301 | for (i = 0; i < dram->num_cs; i++) { |
| 302 | const struct mbus_dram_window *cs = dram->cs + i; |
| 303 | |
| 304 | writel(cs->base & 0xffff0000, |
| 305 | pcie->base + PCIE_WIN04_BASE_OFF(i)); |
| 306 | writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i)); |
| 307 | writel(((cs->size - 1) & 0xffff0000) | |
| 308 | (cs->mbus_attr << 8) | |
| 309 | (dram->mbus_dram_target_id << 4) | 1, |
| 310 | pcie->base + PCIE_WIN04_CTRL_OFF(i)); |
| 311 | |
| 312 | size += cs->size; |
| 313 | } |
| 314 | |
| 315 | /* Round up 'size' to the nearest power of two. */ |
| 316 | if ((size & (size - 1)) != 0) |
| 317 | size = 1 << fls(size); |
| 318 | |
| 319 | /* Setup BAR[1] to all DRAM banks. */ |
| 320 | writel(dram->cs[0].base | 0xc, pcie->base + PCIE_BAR_LO_OFF(1)); |
| 321 | writel(0, pcie->base + PCIE_BAR_HI_OFF(1)); |
| 322 | writel(((size - 1) & 0xffff0000) | 0x1, |
| 323 | pcie->base + PCIE_BAR_CTRL_OFF(1)); |
| 324 | } |
| 325 | |
| 326 | void pci_init_board(void) |
| 327 | { |
| 328 | int mem_target, mem_attr, i; |
| 329 | int bus = 0; |
| 330 | u32 reg; |
| 331 | u32 soc_ctrl = readl(MVEBU_SYSTEM_REG_BASE + 0x4); |
| 332 | |
| 333 | /* Check SoC Control Power State */ |
| 334 | debug("%s: SoC Control %08x, 0en %01lx, 1en %01lx, 2en %01lx\n", |
| 335 | __func__, soc_ctrl, SELECT(soc_ctrl, 0), SELECT(soc_ctrl, 1), |
| 336 | SELECT(soc_ctrl, 2)); |
| 337 | |
| 338 | for (i = 0; i < MAX_PEX; i++) { |
| 339 | struct mvebu_pcie *pcie = &pcie_bus[i]; |
| 340 | struct pci_controller *hose = &pcie->hose; |
| 341 | |
| 342 | /* Get port number, lane number and memory target / attr */ |
| 343 | mvebu_get_port_lane(pcie, i, &mem_target, &mem_attr); |
| 344 | |
| 345 | /* Don't read at all from pci registers if port power is down */ |
| 346 | if (pcie->lane == 0 && SELECT(soc_ctrl, pcie->port) == 0) { |
| 347 | i += 3; |
| 348 | debug("%s: skipping port %d\n", __func__, pcie->port); |
| 349 | continue; |
| 350 | } |
| 351 | |
| 352 | pcie->base = (void __iomem *)PCIE_BASE(i); |
| 353 | |
| 354 | /* Check link and skip ports that have no link */ |
| 355 | if (!mvebu_pcie_link_up(pcie)) { |
| 356 | debug("%s: PCIe %d.%d - down\n", __func__, |
| 357 | pcie->port, pcie->lane); |
| 358 | continue; |
| 359 | } |
| 360 | debug("%s: PCIe %d.%d - up, base %08x\n", __func__, |
| 361 | pcie->port, pcie->lane, (u32)pcie->base); |
| 362 | |
| 363 | /* Read Id info and local bus/dev */ |
| 364 | debug("direct conf read %08x, local bus %d, local dev %d\n", |
| 365 | readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie), |
| 366 | mvebu_pcie_get_local_dev_nr(pcie)); |
| 367 | |
| 368 | mvebu_pcie_set_local_bus_nr(pcie, bus); |
| 369 | mvebu_pcie_set_local_dev_nr(pcie, 0); |
| 370 | pcie->dev = PCI_BDF(bus, 0, 0); |
| 371 | |
| 372 | pcie->mem.start = (u32)mvebu_pcie_membase; |
| 373 | pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1; |
| 374 | mvebu_pcie_membase += PCIE_MEM_SIZE; |
| 375 | |
| 376 | if (mvebu_mbus_add_window_by_id(mem_target, mem_attr, |
| 377 | (phys_addr_t)pcie->mem.start, |
| 378 | PCIE_MEM_SIZE)) { |
| 379 | printf("PCIe unable to add mbus window for mem at %08x+%08x\n", |
| 380 | (u32)pcie->mem.start, PCIE_MEM_SIZE); |
| 381 | } |
| 382 | |
| 383 | /* Setup windows and configure host bridge */ |
| 384 | mvebu_pcie_setup_wins(pcie); |
| 385 | |
| 386 | /* Master + slave enable. */ |
| 387 | reg = readl(pcie->base + PCIE_CMD_OFF); |
| 388 | reg |= PCI_COMMAND_MEMORY; |
| 389 | reg |= PCI_COMMAND_MASTER; |
| 390 | reg |= BIT(10); /* disable interrupts */ |
| 391 | writel(reg, pcie->base + PCIE_CMD_OFF); |
| 392 | |
| 393 | /* Setup U-Boot PCI Controller */ |
| 394 | hose->first_busno = 0; |
| 395 | hose->current_busno = bus; |
| 396 | |
| 397 | /* PCI memory space */ |
| 398 | pci_set_region(hose->regions + 0, pcie->mem.start, |
| 399 | pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM); |
| 400 | pci_set_region(hose->regions + 1, |
| 401 | 0, 0, |
| 402 | gd->ram_size, |
| 403 | PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); |
| 404 | hose->region_count = 2; |
| 405 | |
| 406 | pci_set_ops(hose, |
| 407 | pci_hose_read_config_byte_via_dword, |
| 408 | pci_hose_read_config_word_via_dword, |
| 409 | mvebu_pcie_read_config_dword, |
| 410 | pci_hose_write_config_byte_via_dword, |
| 411 | pci_hose_write_config_word_via_dword, |
| 412 | mvebu_pcie_write_config_dword); |
| 413 | pci_register_hose(hose); |
| 414 | |
| 415 | hose->last_busno = pci_hose_scan(hose); |
| 416 | |
| 417 | /* Set BAR0 to internal registers */ |
| 418 | writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0)); |
| 419 | writel(0, pcie->base + PCIE_BAR_HI_OFF(0)); |
| 420 | |
| 421 | bus = hose->last_busno + 1; |
| 422 | } |
| 423 | } |