blob: bd346bf04b87698b9b408fa15b339a2c9b8ba961 [file] [log] [blame]
Stefan Roese887e2ec2006-09-07 11:51:23 +02001/*
Matthias Fuchs83a49c82008-01-16 10:33:46 +01002 * (C) Copyright 2008
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
Stefan Roese887e2ec2006-09-07 11:51:23 +02004 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <ppc_asm.tmpl>
Larry Johnsonc68f59f2007-12-22 15:34:20 -050025#include <asm-ppc/mmu.h>
Stefan Roese887e2ec2006-09-07 11:51:23 +020026#include <config.h>
27
Matthias Fuchs83a49c82008-01-16 10:33:46 +010028/*
Stefan Roese887e2ec2006-09-07 11:51:23 +020029 * TLB TABLE
30 *
31 * This table is used by the cpu boot code to setup the initial tlb
32 * entries. Rather than make broad assumptions in the cpu source tree,
33 * this table lets each board set things up however they like.
34 *
35 * Pointer to the table is returned in r1
Matthias Fuchs83a49c82008-01-16 10:33:46 +010036 */
Stefan Roese887e2ec2006-09-07 11:51:23 +020037 .section .bootpg,"ax"
38 .globl tlbtab
39
40tlbtab:
41 tlbtab_start
42
Niklaus Giger4d332db2008-01-10 18:50:33 +010043 /* vxWorks needs this as first entry for the Machine Check interrupt */
44 tlbentry( 0x40000000, SZ_256M, 0, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
Stefan Roese887e2ec2006-09-07 11:51:23 +020045
46 /* TLB-entry for DDR SDRAM (Up to 2GB) */
Stefan Roeseea2e1422007-10-31 20:57:11 +010047#ifdef CONFIG_4xx_DCACHE
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020048 tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
Stefan Roeseea2e1422007-10-31 20:57:11 +010049#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020050 tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
Stefan Roeseea2e1422007-10-31 20:57:11 +010051#endif
Stefan Roese887e2ec2006-09-07 11:51:23 +020052
Niklaus Giger4d332db2008-01-10 18:50:33 +010053 /* TLB-entry for EBC */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020054 tlbentry( CONFIG_SYS_BCSR_BASE, SZ_256M, CONFIG_SYS_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
Niklaus Giger4d332db2008-01-10 18:50:33 +010055
56 /* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the
57 * speed up boot process. It is patched after relocation to enable SA_I
58 */
59#ifndef CONFIG_NAND_SPL
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020060 tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
Niklaus Giger4d332db2008-01-10 18:50:33 +010061#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020062 tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
Niklaus Giger4d332db2008-01-10 18:50:33 +010063#endif
64
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020065#ifdef CONFIG_SYS_INIT_RAM_DCACHE
Stefan Roese887e2ec2006-09-07 11:51:23 +020066 /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020067 tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
Stefan Roese887e2ec2006-09-07 11:51:23 +020068#endif
69
70 /* TLB-entry for PCI Memory */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020071 tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
72 tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
73 tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
74 tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
Stefan Roese887e2ec2006-09-07 11:51:23 +020075
Stefan Roese887e2ec2006-09-07 11:51:23 +020076 /* TLB-entry for NAND */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020077 tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
Stefan Roese887e2ec2006-09-07 11:51:23 +020078
79 /* TLB-entry for Internal Registers & OCM */
80 tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I )
81
82 /*TLB-entry PCI registers*/
83 tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
84
85 /* TLB-entry for peripherals */
86 tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
87
Gary Jennejohn81b73de2007-08-31 15:21:46 +020088 /* TLB-entry PCI IO Space - from sr@denx.de */
89 tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
90
Stefan Roese887e2ec2006-09-07 11:51:23 +020091 tlbtab_end
92
93#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
94 /*
95 * For NAND booting the first TLB has to be reconfigured to full size
96 * and with caching disabled after running from RAM!
97 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020098#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
99#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
Stefan Roese887e2ec2006-09-07 11:51:23 +0200100#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
101
102 .globl reconfig_tlb0
103reconfig_tlb0:
104 sync
105 isync
106 addi r4,r0,0x0000 /* TLB entry #0 */
107 lis r5,TLB00@h
108 ori r5,r5,TLB00@l
109 tlbwe r5,r4,0x0000 /* Save it out */
110 lis r5,TLB01@h
111 ori r5,r5,TLB01@l
112 tlbwe r5,r4,0x0001 /* Save it out */
113 lis r5,TLB02@h
114 ori r5,r5,TLB02@l
115 tlbwe r5,r4,0x0002 /* Save it out */
116 sync
117 isync
118 blr
119#endif