blob: 80d57f46d4dc8fbc84a5e6642cfe27096d15a091 [file] [log] [blame]
Peter Howarda868e442015-03-23 09:19:56 +11001/*
2 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * Based on davinci_dvevm.h. Original Copyrights follow:
5 *
6 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23#ifndef __CONFIG_H
24#define __CONFIG_H
25
26/*
27 * Board
28 */
29#define CONFIG_DRIVER_TI_EMAC
30#undef CONFIG_USE_SPIFLASH
31#undef CONFIG_SYS_USE_NOR
32#define CONFIG_USE_NAND
33
34/*
35 * SoC Configuration
36 */
37#define CONFIG_MACH_OMAPL138_LCDK
38#define CONFIG_ARM926EJS /* arm926ejs CPU core */
39#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
40#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
41#define CONFIG_SYS_OSCIN_FREQ 24000000
42#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
43#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
44#define CONFIG_SYS_HZ 1000
45#define CONFIG_SKIP_LOWLEVEL_INIT
46#define CONFIG_SYS_TEXT_BASE 0xc1080000
47
48/*
49 * Memory Info
50 */
51#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */
52#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
53#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */
54#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
55
56/* memtest start addr */
57#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
58
59/* memtest will be run on 16MB */
60#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
61
62#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
63#define CONFIG_STACKSIZE (256*1024) /* regular stack */
64
65#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \
66 DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \
67 DAVINCI_SYSCFG_SUSPSRC_SPI1 | \
68 DAVINCI_SYSCFG_SUSPSRC_UART2 | \
69 DAVINCI_SYSCFG_SUSPSRC_EMAC | \
70 DAVINCI_SYSCFG_SUSPSRC_I2C)
71
72/*
73 * PLL configuration
74 */
75#define CONFIG_SYS_DV_CLKMODE 0
76#define CONFIG_SYS_DA850_PLL0_POSTDIV 1
77#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000
78#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001
79#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002
80#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003
81#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002
82#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1
83#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005
84
85#define CONFIG_SYS_DA850_PLL1_POSTDIV 1
86#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000
87#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001
88#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8003
89
90#define CONFIG_SYS_DA850_PLL0_PLLM 24
91#define CONFIG_SYS_DA850_PLL1_PLLM 21
92
93/*
94 * Serial Driver info
95 */
96#define CONFIG_SYS_NS16550
97#define CONFIG_SYS_NS16550_SERIAL
98#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
99#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
100#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
101#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
102#define CONFIG_BAUDRATE 115200 /* Default baud rate */
103#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
104
105#define CONFIG_SPI
Peter Howarda868e442015-03-23 09:19:56 +1100106#define CONFIG_SPI_FLASH_STMICRO
107#define CONFIG_SPI_FLASH_WINBOND
108#define CONFIG_DAVINCI_SPI
109#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
110#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
111#define CONFIG_SF_DEFAULT_SPEED 30000000
112#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
113
114#ifdef CONFIG_USE_SPIFLASH
115#define CONFIG_SPL_SPI_SUPPORT
116#define CONFIG_SPL_SPI_FLASH_SUPPORT
117#define CONFIG_SPL_SPI_LOAD
118#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
119#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000
120#endif
121
122/*
123 * I2C Configuration
124 */
125#define CONFIG_SYS_I2C
126#define CONFIG_SYS_I2C_DAVINCI
127#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000
128#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
129#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20
130
131/*
132 * Flash & Environment
133 */
134#ifdef CONFIG_USE_NAND
135#undef CONFIG_ENV_IS_IN_FLASH
136#define CONFIG_NAND_DAVINCI
137#define CONFIG_SYS_NO_FLASH
138#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
139#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
140#define CONFIG_ENV_SIZE (128 << 9)
141#define CONFIG_SYS_NAND_USE_FLASH_BBT
142#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
143#define CONFIG_SYS_NAND_PAGE_2K
144#define CONFIG_SYS_NAND_BUSWIDTH_16_BIT
145#define CONFIG_SYS_NAND_CS 3
146#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
147#define CONFIG_SYS_CLE_MASK 0x10
148#define CONFIG_SYS_ALE_MASK 0x8
149#undef CONFIG_SYS_NAND_HW_ECC
150#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
151#define NAND_MAX_CHIPS 1
152#endif
153
154#ifdef CONFIG_SYS_USE_NOR
155#define CONFIG_ENV_IS_IN_FLASH
156#undef CONFIG_SYS_NO_FLASH
157#define CONFIG_FLASH_CFI_DRIVER
158#define CONFIG_SYS_FLASH_CFI
159#define CONFIG_SYS_FLASH_PROTECTION
160#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
161#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */
162#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3)
163#define CONFIG_ENV_SIZE (128 << 10)
164#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
165#define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */
166#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
167 + 3)
168#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ
169#endif
170
171#ifdef CONFIG_USE_SPIFLASH
172#undef CONFIG_ENV_IS_IN_FLASH
173#undef CONFIG_ENV_IS_IN_NAND
174#define CONFIG_ENV_IS_IN_SPI_FLASH
175#define CONFIG_ENV_SIZE (64 << 10)
176#define CONFIG_ENV_OFFSET (256 << 10)
177#define CONFIG_ENV_SECT_SIZE (64 << 10)
178#define CONFIG_SYS_NO_FLASH
179#endif
180
181/*
182 * Network & Ethernet Configuration
183 */
184#ifdef CONFIG_DRIVER_TI_EMAC
185#define CONFIG_EMAC_MDIO_PHY_NUM 7
186#define CONFIG_MII
187#undef CONFIG_DRIVER_TI_EMAC_USE_RMII
188#define CONFIG_BOOTP_DEFAULT
189#define CONFIG_BOOTP_DNS
190#define CONFIG_BOOTP_DNS2
191#define CONFIG_BOOTP_SEND_HOSTNAME
192#define CONFIG_NET_RETRY_COUNT 10
Peter Howarda868e442015-03-23 09:19:56 +1100193#endif
194
195/*
196 * U-Boot general configuration
197 */
Peter Howarda868e442015-03-23 09:19:56 +1100198#define CONFIG_MISC_INIT_R
199#define CONFIG_BOARD_EARLY_INIT_F
200#define CONFIG_BOOTFILE "uImage" /* Boot file name */
Peter Howarda868e442015-03-23 09:19:56 +1100201#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
202#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
203#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
204#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
205#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
206#define CONFIG_VERSION_VARIABLE
207#define CONFIG_AUTO_COMPLETE
208#define CONFIG_SYS_HUSH_PARSER
209#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
210#define CONFIG_CMDLINE_EDITING
211#define CONFIG_SYS_LONGHELP
212#define CONFIG_CRC32_VERIFY
213#define CONFIG_MX_CYCLIC
214#define CONFIG_OF_LIBFDT
215
216/*
217 * Linux Information
218 */
219#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
220#define CONFIG_CMDLINE_TAG
221#define CONFIG_REVISION_TAG
222#define CONFIG_SETUP_MEMORY_TAGS
223#define CONFIG_BOOTARGS "console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootwait ip=off"
224#define CONFIG_BOOTCOMMAND "if mmc rescan 0; then if fatload mmc 0 0xc0600000 boot.scr; then source 0xc0600000; else fatload mmc 0 0xc0700000 uImage; bootm c0700000; fi; else sf probe 0; sf read 0xc0700000 0x80000 0x220000; bootm 0xc0700000; fi"
225#define CONFIG_BOOTDELAY 3
226
227/*
228 * U-Boot commands
229 */
Peter Howarda868e442015-03-23 09:19:56 +1100230#define CONFIG_CMD_ENV
231#define CONFIG_CMD_ASKENV
232#define CONFIG_CMD_DHCP
233#define CONFIG_CMD_DIAG
234#define CONFIG_CMD_MII
235#define CONFIG_CMD_PING
236#define CONFIG_CMD_SAVES
Peter Howarda868e442015-03-23 09:19:56 +1100237#ifdef CONFIG_CMD_BDI
238#define CONFIG_CLOCKS
239#endif
240
241#ifndef CONFIG_DRIVER_TI_EMAC
Peter Howarda868e442015-03-23 09:19:56 +1100242#undef CONFIG_CMD_DHCP
243#undef CONFIG_CMD_MII
244#undef CONFIG_CMD_PING
245#endif
246
247#ifdef CONFIG_USE_NAND
Peter Howarda868e442015-03-23 09:19:56 +1100248#define CONFIG_CMD_NAND
249
250#define CONFIG_CMD_MTDPARTS
251#define CONFIG_MTD_DEVICE
252#define CONFIG_MTD_PARTITIONS
253#define CONFIG_LZO
254#define CONFIG_RBTREE
255#define CONFIG_CMD_UBI
256#define CONFIG_CMD_UBIFS
257#endif
258
259#ifdef CONFIG_USE_SPIFLASH
Peter Howarda868e442015-03-23 09:19:56 +1100260#define CONFIG_CMD_SPI
261#define CONFIG_CMD_SF
Peter Howarda868e442015-03-23 09:19:56 +1100262#endif
263
264#if !defined(CONFIG_USE_NAND) && \
265 !defined(CONFIG_SYS_USE_NOR) && \
266 !defined(CONFIG_USE_SPIFLASH)
267#define CONFIG_ENV_IS_NOWHERE
268#define CONFIG_SYS_NO_FLASH
269#define CONFIG_ENV_SIZE (16 << 10)
Peter Howarda868e442015-03-23 09:19:56 +1100270#undef CONFIG_CMD_ENV
271#endif
272
273/* SD/MMC */
274#define CONFIG_MMC
275#define CONFIG_GENERIC_MMC
276#define CONFIG_DAVINCI_MMC
277
278#ifdef CONFIG_MMC
279#define CONFIG_DOS_PARTITION
280#define CONFIG_CMD_EXT2
281#define CONFIG_CMD_FAT
282#define CONFIG_CMD_MMC
283#undef CONFIG_ENV_IS_IN_MMC
284#endif
285
286#ifdef CONFIG_ENV_IS_IN_MMC
287#undef CONFIG_ENV_SIZE
288#undef CONFIG_ENV_OFFSET
289#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
290#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */
291#undef CONFIG_ENV_IS_IN_FLASH
292#undef CONFIG_ENV_IS_IN_NAND
293#undef CONFIG_ENV_IS_IN_SPI_FLASH
294#endif
295
296#ifndef CONFIG_DIRECT_NOR_BOOT
297/* defines for SPL */
298#define CONFIG_SPL_FRAMEWORK
299#define CONFIG_SPL_BOARD_INIT
300#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
301 CONFIG_SYS_MALLOC_LEN)
302#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
303#define CONFIG_SPL_SERIAL_SUPPORT
304#define CONFIG_SPL_LIBCOMMON_SUPPORT
305#define CONFIG_SPL_LIBGENERIC_SUPPORT
306#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
307#define CONFIG_SPL_STACK 0x8001ff00
308#define CONFIG_SPL_TEXT_BASE 0x80000000
309#define CONFIG_SPL_MAX_FOOTPRINT 32768
310#define CONFIG_SPL_PAD_TO 32768
311#endif
312
313/* additions for new relocation code, must added to all boards */
314#define CONFIG_SYS_SDRAM_BASE 0xc0000000
315#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
316 GENERATED_GBL_DATA_SIZE)
317#endif /* __CONFIG_H */