blob: 65496d0d90a9a5c9a34e660257fca8bf6200ccae [file] [log] [blame]
Kumar Gala47d41cc2009-02-05 20:40:57 -06001/*
Poonam Aggrwalb8cdd012011-01-13 21:39:27 +05302 * Copyright 2009-2011 Freescale Semiconductor, Inc.
Kumar Gala47d41cc2009-02-05 20:40:57 -06003 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Kumar Gala47d41cc2009-02-05 20:40:57 -06005 */
6
7#ifndef _ASM_CONFIG_H_
8#define _ASM_CONFIG_H_
9
Kumar Gala243be8e2011-01-19 03:05:26 -060010#ifdef CONFIG_MPC85xx
11#include <asm/config_mpc85xx.h>
York Sun5614e712013-09-30 09:22:09 -070012#define CONFIG_SYS_FSL_DDR
Kumar Gala243be8e2011-01-19 03:05:26 -060013#endif
14
15#ifdef CONFIG_MPC86xx
16#include <asm/config_mpc86xx.h>
York Sun5614e712013-09-30 09:22:09 -070017#define CONFIG_SYS_FSL_DDR
18#endif
19
20#ifdef CONFIG_MPC83xx
21#define CONFIG_SYS_FSL_DDR
Kumar Gala243be8e2011-01-19 03:05:26 -060022#endif
23
York Sun7ac3cc22012-08-17 09:00:54 +000024#ifndef HWCONFIG_BUFFER_SIZE
25 #define HWCONFIG_BUFFER_SIZE 256
26#endif
27
Mingkai Hu273feaf2011-04-26 16:31:16 +080028/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */
29#if defined(CONFIG_MPC8XXX_SPI) || defined(CONFIG_FSL_ESPI)
30# ifndef CONFIG_HARD_SPI
31# define CONFIG_HARD_SPI
32# endif
33#endif
34
Mike Frysingera16028d2009-11-03 11:35:59 -050035#define CONFIG_LMB
John Rigbyfca43cc2010-10-13 13:57:35 -060036#define CONFIG_SYS_BOOT_RAMDISK_HIGH
37#define CONFIG_SYS_BOOT_GET_CMDLINE
38#define CONFIG_SYS_BOOT_GET_KBD
Mike Frysingera16028d2009-11-03 11:35:59 -050039
Kumar Gala87c90632009-02-05 20:40:58 -060040#ifndef CONFIG_MAX_MEM_MAPPED
York Sund29d17d2011-08-26 11:32:44 -070041#if defined(CONFIG_4xx) || \
42 defined(CONFIG_E500) || \
43 defined(CONFIG_MPC86xx) || \
44 defined(CONFIG_E300)
Kumar Gala87c90632009-02-05 20:40:58 -060045#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
46#else
Stefan Roese2ede8792009-02-11 09:37:12 +010047#define CONFIG_MAX_MEM_MAPPED (256 << 20)
Kumar Gala87c90632009-02-05 20:40:58 -060048#endif
49#endif
50
Peter Tyserf732a752009-07-15 00:01:08 -050051/* Check if boards need to enable FSL DMA engine for SDRAM init */
52#if !defined(CONFIG_FSL_DMA) && defined(CONFIG_DDR_ECC)
53#if (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)) || \
54 ((defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) && \
55 !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER))
Peter Tyser017f11f2009-06-30 17:15:40 -050056#define CONFIG_FSL_DMA
Kumar Gala47d41cc2009-02-05 20:40:57 -060057#endif
Peter Tyser017f11f2009-06-30 17:15:40 -050058#endif
59
Kumar Gala243be8e2011-01-19 03:05:26 -060060#ifndef CONFIG_MAX_CPUS
Kumar Gala7e4259b2009-03-19 02:39:17 -050061#define CONFIG_MAX_CPUS 1
Poonam Aggrwal0e870982009-07-31 12:08:14 +053062#endif
63
Peter Tyser5ccd29c2009-10-23 15:55:47 -050064/*
65 * Provide a default boot page translation virtual address that lines up with
66 * Freescale's default e500 reset page.
67 */
68#if (defined(CONFIG_E500) && defined(CONFIG_MP))
69#ifndef CONFIG_BPTR_VIRT_ADDR
70#define CONFIG_BPTR_VIRT_ADDR 0xfffff000
71#endif
72#endif
73
Kim Phillips929a2132010-06-01 12:24:27 -050074/*
75 * SEC (crypto unit) major compatible version determination
76 */
Kumar Gala243be8e2011-01-19 03:05:26 -060077#if defined(CONFIG_MPC83xx)
Ruchika Gupta01819372014-12-15 11:30:36 +053078#define CONFIG_SYS_FSL_SEC_BE
Kim Phillips929a2132010-06-01 12:24:27 -050079#define CONFIG_SYS_FSL_SEC_COMPAT 2
80#endif
81
Becky Brucef51cdaf2010-06-17 11:37:20 -050082/* Since so many PPC SOCs have a semi-common LBC, define this here */
83#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
84 defined(CONFIG_MPC83xx)
Dipen Dudhatd789b5f2011-01-20 16:29:35 +053085#if !defined(CONFIG_FSL_IFC)
Becky Brucef51cdaf2010-06-17 11:37:20 -050086#define CONFIG_FSL_LBC
87#endif
Dipen Dudhatd789b5f2011-01-20 16:29:35 +053088#endif
Becky Brucef51cdaf2010-06-17 11:37:20 -050089
Andy Fleming063c1262011-04-08 02:10:54 -050090/* The TSEC driver uses the PHYLIB infrastructure */
91#ifndef CONFIG_PHYLIB
92#if defined(CONFIG_TSEC_ENET)
93#define CONFIG_PHYLIB
94
95#include <config_phylib_all_drivers.h>
96#endif /* TSEC_ENET */
97#endif /* !CONFIG_PHYLIB */
98
Kumar Galac916d7c2011-04-13 08:37:44 -050099/* The FMAN driver uses the PHYLIB infrastructure */
100#if defined(CONFIG_FMAN_ENET)
101#define CONFIG_PHYLIB
102#endif
103
Albert Aribaudf2a37fc2010-08-08 05:17:05 +0530104/* All PPC boards must swap IDE bytes */
105#define CONFIG_IDE_SWAP_IO
106
Peter Tyser017f11f2009-06-30 17:15:40 -0500107#endif /* _ASM_CONFIG_H_ */