blob: f576e938265a5c8c59f5963a49d99b00db5ac128 [file] [log] [blame]
Stefan Roese39a230a2015-08-31 07:33:57 +02001/*
2 * Device Tree file for Marvell Armada 385 development board
3 * (RD-88F6820-GP)
4 *
5 * Copyright (C) 2014 Marvell
6 *
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
8 *
9 * This file is dual-licensed: you can use it either under the terms
10 * of the GPL or the X11 license, at your option. Note that this dual
11 * licensing only applies to this file, and not this project as a
12 * whole.
13 *
14 * a) This file is licensed under the terms of the GNU General Public
15 * License version 2. This program is licensed "as is" without
16 * any warranty of any kind, whether express or implied.
17 *
18 * Or, alternatively,
19 *
20 * b) Permission is hereby granted, free of charge, to any person
21 * obtaining a copy of this software and associated documentation
22 * files (the "Software"), to deal in the Software without
23 * restriction, including without limitation the rights to use,
24 * copy, modify, merge, publish, distribute, sublicense, and/or
25 * sell copies of the Software, and to permit persons to whom the
26 * Software is furnished to do so, subject to the following
27 * conditions:
28 *
29 * The above copyright notice and this permission notice shall be
30 * included in all copies or substantial portions of the Software.
31 *
32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
39 * OTHER DEALINGS IN THE SOFTWARE.
40 */
41
42/dts-v1/;
43#include "armada-388.dtsi"
44#include <dt-bindings/gpio/gpio.h>
45
46/ {
47 model = "Marvell Armada 385 GP";
48 compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
49
50 chosen {
51 stdout-path = "serial0:115200n8";
52 };
53
54 memory {
55 device_type = "memory";
56 reg = <0x00000000 0x80000000>; /* 2 GB */
57 };
58
59 soc {
60 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
61 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
62
63 internal-regs {
64 spi@10600 {
65 pinctrl-names = "default";
66 pinctrl-0 = <&spi0_pins>;
67 status = "okay";
68
69 spi-flash@0 {
70 #address-cells = <1>;
71 #size-cells = <1>;
72 compatible = "st,m25p128", "jedec,spi-nor";
73 reg = <0>; /* Chip select 0 */
74 spi-max-frequency = <50000000>;
75 m25p,fast-read;
76 };
77 };
78
79 i2c@11000 {
80 pinctrl-names = "default";
81 pinctrl-0 = <&i2c0_pins>;
82 status = "okay";
83 clock-frequency = <100000>;
84 /*
85 * The EEPROM located at adresse 54 is needed
86 * for the boot - DO NOT ERASE IT -
87 */
88
89 expander0: pca9555@20 {
90 compatible = "nxp,pca9555";
91 pinctrl-names = "default";
92 pinctrl-0 = <&pca0_pins>;
93 interrupt-parent = <&gpio0>;
94 interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
95 gpio-controller;
96 #gpio-cells = <2>;
97 interrupt-controller;
98 #interrupt-cells = <2>;
99 reg = <0x20>;
100 };
101
102 expander1: pca9555@21 {
103 compatible = "nxp,pca9555";
104 pinctrl-names = "default";
105 interrupt-parent = <&gpio0>;
106 interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
107 gpio-controller;
108 #gpio-cells = <2>;
109 interrupt-controller;
110 #interrupt-cells = <2>;
111 reg = <0x21>;
112 };
113
114 };
115
116 serial@12000 {
117 /*
118 * Exported on the micro USB connector CON16
119 * through an FTDI
120 */
121
122 pinctrl-names = "default";
123 pinctrl-0 = <&uart0_pins>;
124 status = "okay";
Stefan Roese64512232015-11-25 07:37:00 +0100125 u-boot,dm-pre-reloc;
Stefan Roese39a230a2015-08-31 07:33:57 +0200126 };
127
128 /* GE1 CON15 */
129 ethernet@30000 {
130 pinctrl-names = "default";
131 pinctrl-0 = <&ge1_rgmii_pins>;
132 status = "okay";
133 phy = <&phy1>;
134 phy-mode = "rgmii-id";
135 };
136
137 /* CON4 */
138 usb@58000 {
139 vcc-supply = <&reg_usb2_0_vbus>;
140 status = "okay";
141 };
142
143 /* GE0 CON1 */
144 ethernet@70000 {
145 pinctrl-names = "default";
146 /*
147 * The Reference Clock 0 is used to provide a
148 * clock to the PHY
149 */
150 pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
151 status = "okay";
152 phy = <&phy0>;
153 phy-mode = "rgmii-id";
154 };
155
156
157 mdio@72004 {
158 pinctrl-names = "default";
159 pinctrl-0 = <&mdio_pins>;
160
161 phy0: ethernet-phy@1 {
162 reg = <1>;
163 };
164
165 phy1: ethernet-phy@0 {
166 reg = <0>;
167 };
168 };
169
170 sata@a8000 {
171 pinctrl-names = "default";
172 pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
173 status = "okay";
174 #address-cells = <1>;
175 #size-cells = <0>;
176
177 sata0: sata-port@0 {
178 reg = <0>;
179 target-supply = <&reg_5v_sata0>;
180 };
181
182 sata1: sata-port@1 {
183 reg = <1>;
184 target-supply = <&reg_5v_sata1>;
185 };
186 };
187
188 sata@e0000 {
189 pinctrl-names = "default";
190 pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
191 status = "okay";
192 #address-cells = <1>;
193 #size-cells = <0>;
194
195 sata2: sata-port@0 {
196 reg = <0>;
197 target-supply = <&reg_5v_sata2>;
198 };
199
200 sata3: sata-port@1 {
201 reg = <1>;
202 target-supply = <&reg_5v_sata3>;
203 };
204 };
205
206 sdhci@d8000 {
207 pinctrl-names = "default";
208 pinctrl-0 = <&sdhci_pins>;
209 cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
210 no-1-8-v;
211 wp-inverted;
212 bus-width = <8>;
213 status = "okay";
214 };
215
216 /* CON5 */
217 usb3@f0000 {
218 vcc-supply = <&reg_usb2_1_vbus>;
219 status = "okay";
220 };
221
222 /* CON7 */
223 usb3@f8000 {
224 vcc-supply = <&reg_usb3_vbus>;
225 status = "okay";
226 };
227 };
228
229 pcie-controller {
230 status = "okay";
231 /*
232 * One PCIe units is accessible through
233 * standard PCIe slot on the board.
234 */
235 pcie@1,0 {
236 /* Port 0, Lane 0 */
237 status = "okay";
238 };
239
240 /*
241 * The two other PCIe units are accessible
242 * through mini PCIe slot on the board.
243 */
244 pcie@2,0 {
245 /* Port 1, Lane 0 */
246 status = "okay";
247 };
248 pcie@3,0 {
249 /* Port 2, Lane 0 */
250 status = "okay";
251 };
252 };
253
254 gpio-fan {
255 compatible = "gpio-fan";
256 gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
257 gpio-fan,speed-map = < 0 0
258 3000 1>;
259 };
260 };
261
262 reg_usb3_vbus: usb3-vbus {
263 compatible = "regulator-fixed";
264 regulator-name = "usb3-vbus";
265 regulator-min-microvolt = <5000000>;
266 regulator-max-microvolt = <5000000>;
267 enable-active-high;
268 regulator-always-on;
269 gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
270 };
271
272 reg_usb2_0_vbus: v5-vbus0 {
273 compatible = "regulator-fixed";
274 regulator-name = "v5.0-vbus0";
275 regulator-min-microvolt = <5000000>;
276 regulator-max-microvolt = <5000000>;
277 enable-active-high;
278 regulator-always-on;
279 gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
280 };
281
282 reg_usb2_1_vbus: v5-vbus1 {
283 compatible = "regulator-fixed";
284 regulator-name = "v5.0-vbus1";
285 regulator-min-microvolt = <5000000>;
286 regulator-max-microvolt = <5000000>;
287 enable-active-high;
288 regulator-always-on;
289 gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
290 };
291
292 reg_usb2_1_vbus: v5-vbus1 {
293 compatible = "regulator-fixed";
294 regulator-name = "v5.0-vbus1";
295 regulator-min-microvolt = <5000000>;
296 regulator-max-microvolt = <5000000>;
297 enable-active-high;
298 regulator-always-on;
299 gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
300 };
301
302 reg_sata0: pwr-sata0 {
303 compatible = "regulator-fixed";
304 regulator-name = "pwr_en_sata0";
305 enable-active-high;
306 regulator-always-on;
307
308 };
309
310 reg_5v_sata0: v5-sata0 {
311 compatible = "regulator-fixed";
312 regulator-name = "v5.0-sata0";
313 regulator-min-microvolt = <5000000>;
314 regulator-max-microvolt = <5000000>;
315 regulator-always-on;
316 vin-supply = <&reg_sata0>;
317 };
318
319 reg_12v_sata0: v12-sata0 {
320 compatible = "regulator-fixed";
321 regulator-name = "v12.0-sata0";
322 regulator-min-microvolt = <12000000>;
323 regulator-max-microvolt = <12000000>;
324 regulator-always-on;
325 vin-supply = <&reg_sata0>;
326 };
327
328 reg_sata1: pwr-sata1 {
329 regulator-name = "pwr_en_sata1";
330 compatible = "regulator-fixed";
331 regulator-min-microvolt = <12000000>;
332 regulator-max-microvolt = <12000000>;
333 enable-active-high;
334 regulator-always-on;
335 gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
336 };
337
338 reg_5v_sata1: v5-sata1 {
339 compatible = "regulator-fixed";
340 regulator-name = "v5.0-sata1";
341 regulator-min-microvolt = <5000000>;
342 regulator-max-microvolt = <5000000>;
343 regulator-always-on;
344 vin-supply = <&reg_sata1>;
345 };
346
347 reg_12v_sata1: v12-sata1 {
348 compatible = "regulator-fixed";
349 regulator-name = "v12.0-sata1";
350 regulator-min-microvolt = <12000000>;
351 regulator-max-microvolt = <12000000>;
352 regulator-always-on;
353 vin-supply = <&reg_sata1>;
354 };
355
356 reg_sata2: pwr-sata2 {
357 compatible = "regulator-fixed";
358 regulator-name = "pwr_en_sata2";
359 enable-active-high;
360 regulator-always-on;
361 gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
362 };
363
364 reg_5v_sata2: v5-sata2 {
365 compatible = "regulator-fixed";
366 regulator-name = "v5.0-sata2";
367 regulator-min-microvolt = <5000000>;
368 regulator-max-microvolt = <5000000>;
369 regulator-always-on;
370 vin-supply = <&reg_sata2>;
371 };
372
373 reg_12v_sata2: v12-sata2 {
374 compatible = "regulator-fixed";
375 regulator-name = "v12.0-sata2";
376 regulator-min-microvolt = <12000000>;
377 regulator-max-microvolt = <12000000>;
378 regulator-always-on;
379 vin-supply = <&reg_sata2>;
380 };
381
382 reg_sata3: pwr-sata3 {
383 compatible = "regulator-fixed";
384 regulator-name = "pwr_en_sata3";
385 enable-active-high;
386 regulator-always-on;
387 gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
388 };
389
390 reg_5v_sata3: v5-sata3 {
391 compatible = "regulator-fixed";
392 regulator-name = "v5.0-sata3";
393 regulator-min-microvolt = <5000000>;
394 regulator-max-microvolt = <5000000>;
395 regulator-always-on;
396 vin-supply = <&reg_sata3>;
397 };
398
399 reg_12v_sata3: v12-sata3 {
400 compatible = "regulator-fixed";
401 regulator-name = "v12.0-sata3";
402 regulator-min-microvolt = <12000000>;
403 regulator-max-microvolt = <12000000>;
404 regulator-always-on;
405 vin-supply = <&reg_sata3>;
406 };
407};
408
409&pinctrl {
410 pca0_pins: pca0_pins {
411 marvell,pins = "mpp18";
412 marvell,function = "gpio";
413 };
414};