Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / 638ee5af6b7f16aff7d42cc9ed0865627cd842c1 / . / arch / arm / dts / stm32mp157c.dtsi
blob: cdf2946968828bf5d827ddbfda76c747a2770652 [file] [log] [blame]
Patrick Delaunaya6743132018-07-09 15:17:19 +0200[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
4 * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
5 */
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/stm32mp1-clks.h>
8#include <dt-bindings/reset/stm32mp1-resets.h>
9
10/ {
11 #address-cells = <1>;
12 #size-cells = <1>;
13
14 cpus {
15 #address-cells = <1>;
16 #size-cells = <0>;
17
18 cpu0: cpu@0 {
19 compatible = "arm,cortex-a7";
20 device_type = "cpu";
21 reg = <0>;
22 };
23
24 cpu1: cpu@1 {
25 compatible = "arm,cortex-a7";
26 device_type = "cpu";
27 reg = <1>;
28 };
29 };
30
31 psci {
32 compatible = "arm,psci";
33 method = "smc";
34 cpu_off = <0x84000002>;
35 cpu_on = <0x84000003>;
36 };
37
38 aliases {
39 gpio0 = &gpioa;
40 gpio1 = &gpiob;
41 gpio2 = &gpioc;
42 gpio3 = &gpiod;
43 gpio4 = &gpioe;
44 gpio5 = &gpiof;
45 gpio6 = &gpiog;
46 gpio7 = &gpioh;
47 gpio8 = &gpioi;
48 gpio9 = &gpioj;
49 gpio10 = &gpiok;
50 serial0 = &usart1;
51 serial1 = &usart2;
52 serial2 = &usart3;
53 serial3 = &uart4;
54 serial4 = &uart5;
55 serial5 = &usart6;
56 serial6 = &uart7;
57 serial7 = &uart8;
58 };
59
60 intc: interrupt-controller@a0021000 {
61 compatible = "arm,cortex-a7-gic";
62 #interrupt-cells = <3>;
63 interrupt-controller;
64 reg = <0xa0021000 0x1000>,
65 <0xa0022000 0x2000>;
66 };
67
68 timer {
69 compatible = "arm,armv7-timer";
70 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
71 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
72 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
73 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
74 interrupt-parent = <&intc>;
75 };
76
77 clocks {
78 clk_hse: clk-hse {
79 #clock-cells = <0>;
80 compatible = "fixed-clock";
81 clock-frequency = <24000000>;
82 };
83
84 clk_hsi: clk-hsi {
85 #clock-cells = <0>;
86 compatible = "fixed-clock";
87 clock-frequency = <64000000>;
88 };
89
90 clk_lse: clk-lse {
91 #clock-cells = <0>;
92 compatible = "fixed-clock";
93 clock-frequency = <32768>;
94 };
95
96 clk_lsi: clk-lsi {
97 #clock-cells = <0>;
98 compatible = "fixed-clock";
99 clock-frequency = <32000>;
100 };
101
102 clk_csi: clk-csi {
103 #clock-cells = <0>;
104 compatible = "fixed-clock";
105 clock-frequency = <4000000>;
106 };
107 };
108
109 soc {
110 compatible = "simple-bus";
111 #address-cells = <1>;
112 #size-cells = <1>;
113 interrupt-parent = <&intc>;
114 ranges;
115
116 timers2: timer@40000000 {
117 #address-cells = <1>;
118 #size-cells = <0>;
119 compatible = "st,stm32-timers";
120 reg = <0x40000000 0x400>;
121 clocks = <&rcc TIM2_K>;
122 clock-names = "int";
123 status = "disabled";
124
125 pwm {
126 compatible = "st,stm32-pwm";
127 status = "disabled";
128 };
129
130 timer@1 {
131 compatible = "st,stm32h7-timer-trigger";
132 reg = <1>;
133 status = "disabled";
134 };
135 };
136
137 timers3: timer@40001000 {
138 #address-cells = <1>;
139 #size-cells = <0>;
140 compatible = "st,stm32-timers";
141 reg = <0x40001000 0x400>;
142 clocks = <&rcc TIM3_K>;
143 clock-names = "int";
144 status = "disabled";
145
146 pwm {
147 compatible = "st,stm32-pwm";
148 status = "disabled";
149 };
150
151 timer@2 {
152 compatible = "st,stm32h7-timer-trigger";
153 reg = <2>;
154 status = "disabled";
155 };
156 };
157
158 timers4: timer@40002000 {
159 #address-cells = <1>;
160 #size-cells = <0>;
161 compatible = "st,stm32-timers";
162 reg = <0x40002000 0x400>;
163 clocks = <&rcc TIM4_K>;
164 clock-names = "int";
165 status = "disabled";
166
167 pwm {
168 compatible = "st,stm32-pwm";
169 status = "disabled";
170 };
171
172 timer@3 {
173 compatible = "st,stm32h7-timer-trigger";
174 reg = <3>;
175 status = "disabled";
176 };
177 };
178
179 timers5: timer@40003000 {
180 #address-cells = <1>;
181 #size-cells = <0>;
182 compatible = "st,stm32-timers";
183 reg = <0x40003000 0x400>;
184 clocks = <&rcc TIM5_K>;
185 clock-names = "int";
186 status = "disabled";
187
188 pwm {
189 compatible = "st,stm32-pwm";
190 status = "disabled";
191 };
192
193 timer@4 {
194 compatible = "st,stm32h7-timer-trigger";
195 reg = <4>;
196 status = "disabled";
197 };
198 };
199
200 timers6: timer@40004000 {
201 #address-cells = <1>;
202 #size-cells = <0>;
203 compatible = "st,stm32-timers";
204 reg = <0x40004000 0x400>;
205 clocks = <&rcc TIM6_K>;
206 clock-names = "int";
207 status = "disabled";
208
209 timer@5 {
210 compatible = "st,stm32h7-timer-trigger";
211 reg = <5>;
212 status = "disabled";
213 };
214 };
215
216 timers7: timer@40005000 {
217 #address-cells = <1>;
218 #size-cells = <0>;
219 compatible = "st,stm32-timers";
220 reg = <0x40005000 0x400>;
221 clocks = <&rcc TIM7_K>;
222 clock-names = "int";
223 status = "disabled";
224
225 timer@6 {
226 compatible = "st,stm32h7-timer-trigger";
227 reg = <6>;
228 status = "disabled";
229 };
230 };
231
232 timers12: timer@40006000 {
233 #address-cells = <1>;
234 #size-cells = <0>;
235 compatible = "st,stm32-timers";
236 reg = <0x40006000 0x400>;
237 clocks = <&rcc TIM12_K>;
238 clock-names = "int";
239 status = "disabled";
240
241 pwm {
242 compatible = "st,stm32-pwm";
243 status = "disabled";
244 };
245
246 timer@11 {
247 compatible = "st,stm32h7-timer-trigger";
248 reg = <11>;
249 status = "disabled";
250 };
251 };
252
253 timers13: timer@40007000 {
254 #address-cells = <1>;
255 #size-cells = <0>;
256 compatible = "st,stm32-timers";
257 reg = <0x40007000 0x400>;
258 clocks = <&rcc TIM13_K>;
259 clock-names = "int";
260 status = "disabled";
261
262 pwm {
263 compatible = "st,stm32-pwm";
264 status = "disabled";
265 };
266
267 timer@12 {
268 compatible = "st,stm32h7-timer-trigger";
269 reg = <12>;
270 status = "disabled";
271 };
272 };
273
274 timers14: timer@40008000 {
275 #address-cells = <1>;
276 #size-cells = <0>;
277 compatible = "st,stm32-timers";
278 reg = <0x40008000 0x400>;
279 clocks = <&rcc TIM14_K>;
280 clock-names = "int";
281 status = "disabled";
282
283 pwm {
284 compatible = "st,stm32-pwm";
285 status = "disabled";
286 };
287
288 timer@13 {
289 compatible = "st,stm32h7-timer-trigger";
290 reg = <13>;
291 status = "disabled";
292 };
293 };
294
295 lptimer1: timer@40009000 {
296 #address-cells = <1>;
297 #size-cells = <0>;
298 compatible = "st,stm32-lptimer";
299 reg = <0x40009000 0x400>;
300 clocks = <&rcc LPTIM1_K>;
301 clock-names = "mux";
302 status = "disabled";
303
304 pwm {
305 compatible = "st,stm32-pwm-lp";
306 #pwm-cells = <3>;
307 status = "disabled";
308 };
309
310 trigger@0 {
311 compatible = "st,stm32-lptimer-trigger";
312 reg = <0>;
313 status = "disabled";
314 };
315
316 counter {
317 compatible = "st,stm32-lptimer-counter";
318 status = "disabled";
319 };
320 };
321
322 usart2: serial@4000e000 {
323 compatible = "st,stm32h7-uart";
324 reg = <0x4000e000 0x400>;
325 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
326 clocks = <&rcc USART2_K>;
327 status = "disabled";
328 };
329
330 usart3: serial@4000f000 {
331 compatible = "st,stm32h7-uart";
332 reg = <0x4000f000 0x400>;
333 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
334 clocks = <&rcc USART3_K>;
335 status = "disabled";
336 };
337
338 uart4: serial@40010000 {
339 compatible = "st,stm32h7-uart";
340 reg = <0x40010000 0x400>;
341 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
342 clocks = <&rcc UART4_K>;
343 status = "disabled";
344 };
345
346 uart5: serial@40011000 {
347 compatible = "st,stm32h7-uart";
348 reg = <0x40011000 0x400>;
349 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
350 clocks = <&rcc UART5_K>;
351 status = "disabled";
352 };
353
354 i2c1: i2c@40012000 {
355 compatible = "st,stm32f7-i2c";
356 reg = <0x40012000 0x400>;
357 interrupt-names = "event", "error";
358 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
359 <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
360 clocks = <&rcc I2C1_K>;
361 resets = <&rcc I2C1_R>;
362 #address-cells = <1>;
363 #size-cells = <0>;
364 status = "disabled";
365 };
366
367 i2c2: i2c@40013000 {
368 compatible = "st,stm32f7-i2c";
369 reg = <0x40013000 0x400>;
370 interrupt-names = "event", "error";
371 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
372 <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
373 clocks = <&rcc I2C2_K>;
374 resets = <&rcc I2C2_R>;
375 #address-cells = <1>;
376 #size-cells = <0>;
377 status = "disabled";
378 };
379
380 i2c3: i2c@40014000 {
381 compatible = "st,stm32f7-i2c";
382 reg = <0x40014000 0x400>;
383 interrupt-names = "event", "error";
384 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
385 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
386 clocks = <&rcc I2C3_K>;
387 resets = <&rcc I2C3_R>;
388 #address-cells = <1>;
389 #size-cells = <0>;
390 status = "disabled";
391 };
392
393 i2c5: i2c@40015000 {
394 compatible = "st,stm32f7-i2c";
395 reg = <0x40015000 0x400>;
396 interrupt-names = "event", "error";
397 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
398 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
399 clocks = <&rcc I2C5_K>;
400 resets = <&rcc I2C5_R>;
401 #address-cells = <1>;
402 #size-cells = <0>;
403 status = "disabled";
404 };
405
406 cec: cec@40016000 {
407 compatible = "st,stm32-cec";
408 reg = <0x40016000 0x400>;
409 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
410 clocks = <&rcc CEC_K>, <&clk_lse>;
411 clock-names = "cec", "hdmi-cec";
412 status = "disabled";
413 };
414
415 dac: dac@40017000 {
416 compatible = "st,stm32h7-dac-core";
417 reg = <0x40017000 0x400>;
418 clocks = <&rcc DAC12>;
419 clock-names = "pclk";
420 #address-cells = <1>;
421 #size-cells = <0>;
422 status = "disabled";
423
424 dac1: dac@1 {
425 compatible = "st,stm32-dac";
426 #io-channels-cells = <1>;
427 reg = <1>;
428 status = "disabled";
429 };
430
431 dac2: dac@2 {
432 compatible = "st,stm32-dac";
433 #io-channels-cells = <1>;
434 reg = <2>;
435 status = "disabled";
436 };
437 };
438
439 uart7: serial@40018000 {
440 compatible = "st,stm32h7-uart";
441 reg = <0x40018000 0x400>;
442 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
443 clocks = <&rcc UART7_K>;
444 status = "disabled";
445 };
446
447 uart8: serial@40019000 {
448 compatible = "st,stm32h7-uart";
449 reg = <0x40019000 0x400>;
450 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
451 clocks = <&rcc UART8_K>;
452 status = "disabled";
453 };
454
455 timers1: timer@44000000 {
456 #address-cells = <1>;
457 #size-cells = <0>;
458 compatible = "st,stm32-timers";
459 reg = <0x44000000 0x400>;
460 clocks = <&rcc TIM1_K>;
461 clock-names = "int";
462 status = "disabled";
463
464 pwm {
465 compatible = "st,stm32-pwm";
466 status = "disabled";
467 };
468
469 timer@0 {
470 compatible = "st,stm32h7-timer-trigger";
471 reg = <0>;
472 status = "disabled";
473 };
474 };
475
476 timers8: timer@44001000 {
477 #address-cells = <1>;
478 #size-cells = <0>;
479 compatible = "st,stm32-timers";
480 reg = <0x44001000 0x400>;
481 clocks = <&rcc TIM8_K>;
482 clock-names = "int";
483 status = "disabled";
484
485 pwm {
486 compatible = "st,stm32-pwm";
487 status = "disabled";
488 };
489
490 timer@7 {
491 compatible = "st,stm32h7-timer-trigger";
492 reg = <7>;
493 status = "disabled";
494 };
495 };
496
497 usart6: serial@44003000 {
498 compatible = "st,stm32h7-uart";
499 reg = <0x44003000 0x400>;
500 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
501 clocks = <&rcc USART6_K>;
502 status = "disabled";
503 };
504
505 timers15: timer@44006000 {
506 #address-cells = <1>;
507 #size-cells = <0>;
508 compatible = "st,stm32-timers";
509 reg = <0x44006000 0x400>;
510 clocks = <&rcc TIM15_K>;
511 clock-names = "int";
512 status = "disabled";
513
514 pwm {
515 compatible = "st,stm32-pwm";
516 status = "disabled";
517 };
518
519 timer@14 {
520 compatible = "st,stm32h7-timer-trigger";
521 reg = <14>;
522 status = "disabled";
523 };
524 };
525
526 timers16: timer@44007000 {
527 #address-cells = <1>;
528 #size-cells = <0>;
529 compatible = "st,stm32-timers";
530 reg = <0x44007000 0x400>;
531 clocks = <&rcc TIM16_K>;
532 clock-names = "int";
533 status = "disabled";
534
535 pwm {
536 compatible = "st,stm32-pwm";
537 status = "disabled";
538 };
539 timer@15 {
540 compatible = "st,stm32h7-timer-trigger";
541 reg = <15>;
542 status = "disabled";
543 };
544 };
545
546 timers17: timer@44008000 {
547 #address-cells = <1>;
548 #size-cells = <0>;
549 compatible = "st,stm32-timers";
550 reg = <0x44008000 0x400>;
551 clocks = <&rcc TIM17_K>;
552 clock-names = "int";
553 status = "disabled";
554
555 pwm {
556 compatible = "st,stm32-pwm";
557 status = "disabled";
558 };
559
560 timer@16 {
561 compatible = "st,stm32h7-timer-trigger";
562 reg = <16>;
563 status = "disabled";
564 };
565 };
566
567 dma1: dma@48000000 {
568 compatible = "st,stm32-dma";
569 reg = <0x48000000 0x400>;
570 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
571 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
572 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
573 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
574 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
575 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
576 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
577 <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
578 clocks = <&rcc DMA1>;
579 #dma-cells = <4>;
580 st,mem2mem;
581 dma-requests = <8>;
582 };
583
584 dma2: dma@48001000 {
585 compatible = "st,stm32-dma";
586 reg = <0x48001000 0x400>;
587 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
588 <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
589 <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
590 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
591 <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
592 <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
593 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
594 <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
595 clocks = <&rcc DMA2>;
596 #dma-cells = <4>;
597 st,mem2mem;
598 dma-requests = <8>;
599 };
600
601 dmamux1: dma-router@48002000 {
602 compatible = "st,stm32h7-dmamux";
603 reg = <0x48002000 0x1c>;
604 #dma-cells = <3>;
605 dma-requests = <128>;
606 dma-masters = <&dma1 &dma2>;
607 dma-channels = <16>;
608 clocks = <&rcc DMAMUX>;
609 };
610
Patrice Chotard638ee5a2018-08-06 09:54:04 +0200[diff] [blame^]611 adc: adc@48003000 {
612 compatible = "st,stm32mp1-adc-core";
613 reg = <0x48003000 0x400>;
614 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
615 <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
616 clocks = <&rcc ADC12>, <&rcc ADC12_K>;
617 clock-names = "bus", "adc";
618 interrupt-controller;
619 #interrupt-cells = <1>;
620 #address-cells = <1>;
621 #size-cells = <0>;
622 status = "disabled";
623
624 adc1: adc@0 {
625 compatible = "st,stm32mp1-adc";
626 #io-channel-cells = <1>;
627 reg = <0x0>;
628 interrupt-parent = <&adc>;
629 interrupts = <0>;
630 status = "disabled";
631 };
632
633 adc2: adc@100 {
634 compatible = "st,stm32mp1-adc";
635 #io-channel-cells = <1>;
636 reg = <0x100>;
637 interrupt-parent = <&adc>;
638 interrupts = <1>;
639 status = "disabled";
640 };
641 };
642
Patrick Delaunaya6743132018-07-09 15:17:19 +0200[diff] [blame]643 sdmmc3: sdmmc@48004000 {
644 compatible = "st,stm32-sdmmc2";
645 reg = <0x48004000 0x400>, <0x48005000 0x400>;
646 reg-names = "sdmmc", "delay";
647 interrupts = <GIC_SPI 137 IRQ_TYPE_NONE>;
648 clocks = <&rcc SDMMC3_K>;
649 resets = <&rcc SDMMC3_R>;
650 st,idma = <1>;
651 cap-sd-highspeed;
652 cap-mmc-highspeed;
653 max-frequency = <120000000>;
654 status = "disabled";
655 };
656
657 rcc: rcc@50000000 {
658 compatible = "st,stm32mp1-rcc", "syscon";
659 reg = <0x50000000 0x1000>;
660 #clock-cells = <1>;
661 #reset-cells = <1>;
662 };
663
664 rcc_reboot: rcc-reboot@50000000 {
665 compatible = "syscon-reboot";
666 regmap = <&rcc>;
667 offset = <0x404>;
668 mask = <0x1>;
669 };
670
671 pwr: pwr@50001000 {
672 compatible = "st,stm32mp1-pwr", "st,stm32-pwr", "syscon", "simple-mfd";
673 reg = <0x50001000 0x400>;
674 system-power-controller;
675 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
676 st,sysrcc = <&rcc>;
677 clocks = <&rcc PLL2_R>;
678 clock-names = "phyclk";
679
680 pwr-regulators@c {
681 compatible = "st,stm32mp1,pwr-reg";
682 st,tzcr = <&rcc 0x0 0x1>;
683
684 reg11: reg11 {
685 regulator-name = "reg11";
686 regulator-min-microvolt = <1100000>;
687 regulator-max-microvolt = <1100000>;
688 };
689
690 reg18: reg18 {
691 regulator-name = "reg18";
692 regulator-min-microvolt = <1800000>;
693 regulator-max-microvolt = <1800000>;
694 };
695
696 usb33: usb33 {
697 regulator-name = "usb33";
698 regulator-min-microvolt = <3300000>;
699 regulator-max-microvolt = <3300000>;
700 };
701 };
702 };
703
704 exti: interrupt-controller@5000d000 {
705 compatible = "st,stm32mp1-exti", "syscon";
706 interrupt-controller;
707 #interrupt-cells = <2>;
708 reg = <0x5000d000 0x400>;
709 };
710
711 syscfg: system-config@50020000 {
712 compatible = "st,stm32-syscfg", "syscon";
713 reg = <0x50020000 0x400>;
714 };
715
716 lptimer2: timer@50021000 {
717 #address-cells = <1>;
718 #size-cells = <0>;
719 compatible = "st,stm32-lptimer";
720 reg = <0x50021000 0x400>;
721 clocks = <&rcc LPTIM2_K>;
722 clock-names = "mux";
723 status = "disabled";
724
725 pwm {
726 compatible = "st,stm32-pwm-lp";
727 #pwm-cells = <3>;
728 status = "disabled";
729 };
730
731 trigger@1 {
732 compatible = "st,stm32-lptimer-trigger";
733 reg = <1>;
734 status = "disabled";
735 };
736
737 counter {
738 compatible = "st,stm32-lptimer-counter";
739 status = "disabled";
740 };
741 };
742
743 lptimer3: timer@50022000 {
744 #address-cells = <1>;
745 #size-cells = <0>;
746 compatible = "st,stm32-lptimer";
747 reg = <0x50022000 0x400>;
748 clocks = <&rcc LPTIM3_K>;
749 clock-names = "mux";
750 status = "disabled";
751
752 pwm {
753 compatible = "st,stm32-pwm-lp";
754 #pwm-cells = <3>;
755 status = "disabled";
756 };
757
758 trigger@2 {
759 compatible = "st,stm32-lptimer-trigger";
760 reg = <2>;
761 status = "disabled";
762 };
763 };
764
765 lptimer4: timer@50023000 {
766 compatible = "st,stm32-lptimer";
767 reg = <0x50023000 0x400>;
768 clocks = <&rcc LPTIM4_K>;
769 clock-names = "mux";
770 status = "disabled";
771
772 pwm {
773 compatible = "st,stm32-pwm-lp";
774 #pwm-cells = <3>;
775 status = "disabled";
776 };
777 };
778
779 lptimer5: timer@50024000 {
780 compatible = "st,stm32-lptimer";
781 reg = <0x50024000 0x400>;
782 clocks = <&rcc LPTIM5_K>;
783 clock-names = "mux";
784 status = "disabled";
785
786 pwm {
787 compatible = "st,stm32-pwm-lp";
788 #pwm-cells = <3>;
789 status = "disabled";
790 };
791 };
792
793 vrefbuf: vrefbuf@50025000 {
794 compatible = "st,stm32-vrefbuf";
795 reg = <0x50025000 0x8>;
796 regulator-min-microvolt = <1500000>;
797 regulator-max-microvolt = <2500000>;
798 clocks = <&rcc VREF>;
799 status = "disabled";
800 };
801
802 cryp1: cryp@54001000 {
803 compatible = "st,stm32mp1-cryp";
804 reg = <0x54001000 0x400>;
805 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
806 clocks = <&rcc CRYP1>;
807 resets = <&rcc CRYP1_R>;
808 status = "disabled";
809 };
810
811 rng1: rng@54003000 {
812 compatible = "st,stm32-rng";
813 reg = <0x54003000 0x400>;
814 clocks = <&rcc RNG1_K>;
815 resets = <&rcc RNG1_R>;
816 status = "disabled";
817 };
818
819 mdma1: dma@58000000 {
820 compatible = "st,stm32h7-mdma";
821 reg = <0x58000000 0x1000>;
822 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
823 clocks = <&rcc MDMA>;
824 #dma-cells = <5>;
825 dma-channels = <32>;
826 dma-requests = <48>;
827 };
828
829 qspi: qspi@58003000 {
830 compatible = "st,stm32f469-qspi";
831 reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
832 reg-names = "qspi", "qspi_mm";
833 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
834 clocks = <&rcc QSPI_K>;
835 resets = <&rcc QSPI_R>;
836 status = "disabled";
837 };
838
839 sdmmc1: sdmmc@58005000 {
840 compatible = "st,stm32-sdmmc2";
841 reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
842 reg-names = "sdmmc", "delay";
843 clocks = <&rcc SDMMC1_K>;
844 resets = <&rcc SDMMC1_R>;
845 st,idma = <1>;
846 cap-sd-highspeed;
847 cap-mmc-highspeed;
848 max-frequency = <120000000>;
849 status = "disabled";
850 };
851
852 sdmmc2: sdmmc@58007000 {
853 compatible = "st,stm32-sdmmc2";
854 reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
855 reg-names = "sdmmc", "delay";
856 interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
857 clocks = <&rcc SDMMC2_K>;
858 resets = <&rcc SDMMC2_R>;
859 st,idma = <1>;
860 cap-sd-highspeed;
861 cap-mmc-highspeed;
862 max-frequency = <120000000>;
863 status = "disabled";
864 };
865
866 crc1: crc@58009000 {
867 compatible = "st,stm32f7-crc";
868 reg = <0x58009000 0x400>;
869 clocks = <&rcc CRC1>;
870 status = "disabled";
871 };
872
873 usbh_ohci: usbh-ohci@5800c000 {
874 compatible = "generic-ohci";
875 reg = <0x5800c000 0x1000>;
876 clocks = <&rcc USBH>;
877 resets = <&rcc USBH_R>;
878 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
879 status = "disabled";
880 };
881
882 usbh_ehci: usbh-ehci@5800d000 {
883 compatible = "generic-ehci";
884 reg = <0x5800d000 0x1000>;
885 clocks = <&rcc USBH>;
886 resets = <&rcc USBH_R>;
887 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
888 companion = <&usbh_ohci>;
889 status = "disabled";
890 };
891
892 dsi: dsi@5a000000 {
893 compatible = "st,stm32-dsi";
894 reg = <0x5a000000 0x800>;
895 clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
896 clock-names = "pclk", "ref", "px_clk";
897 resets = <&rcc DSI_R>;
898 reset-names = "apb";
899 status = "disabled";
900 };
901
902 ltdc: display-controller@5a001000 {
903 compatible = "st,stm32-ltdc";
904 reg = <0x5a001000 0x400>;
905 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
906 <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
907 clocks = <&rcc LTDC_PX>;
908 clock-names = "lcd";
909 resets = <&rcc LTDC_R>;
910 status = "disabled";
911 };
912
913 usbphyc: usbphyc@5a006000 {
914 #address-cells = <1>;
915 #size-cells = <0>;
916 compatible = "st,stm32mp1-usbphyc";
917 reg = <0x5a006000 0x1000>;
918 clocks = <&rcc USBPHY_K>;
919 resets = <&rcc USBPHY_R>;
920 status = "disabled";
921
922 usbphyc_port0: usb-phy@0 {
923 #phy-cells = <0>;
924 reg = <0>;
925 };
926
927 usbphyc_port1: usb-phy@1 {
928 #phy-cells = <1>;
929 reg = <1>;
930 };
931 };
932
933 usart1: serial@5c000000 {
934 compatible = "st,stm32h7-uart";
935 reg = <0x5c000000 0x400>;
936 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
937 clocks = <&rcc USART1_K>;
938 status = "disabled";
939 };
940
941 i2c4: i2c@5c002000 {
942 compatible = "st,stm32f7-i2c";
943 reg = <0x5c002000 0x400>;
944 interrupt-names = "event", "error";
945 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
946 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
947 clocks = <&rcc I2C4_K>;
948 resets = <&rcc I2C4_R>;
949 #address-cells = <1>;
950 #size-cells = <0>;
951 status = "disabled";
952 };
953
954 i2c6: i2c@5c009000 {
955 compatible = "st,stm32f7-i2c";
956 reg = <0x5c009000 0x400>;
957 interrupt-names = "event", "error";
958 interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
959 <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
960 clocks = <&rcc I2C6_K>;
961 resets = <&rcc I2C6_R>;
962 #address-cells = <1>;
963 #size-cells = <0>;
964 status = "disabled";
965 };
966 };
967};