blob: 7571cd950c0463fbbaff807390c8b1475870ca19 [file] [log] [blame]
Stefan Roese899620c2006-08-15 14:22:35 +02001/*
2 * (C) Copyright 2006
3 * Heiko Schocher, DENX Software Engineering, hs@denx.de
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 *
23 */
24
25/*
26 * Altera FPGA configuration support for the ALPR computer from prodrive
27 */
28
29#include <common.h>
30#include <altera.h>
31#include <ACEX1K.h>
32#include <command.h>
33#include <asm-ppc/processor.h>
34#include <ppc440.h>
35#include "fpga.h"
36
37DECLARE_GLOBAL_DATA_PTR;
38
Stefan Roese1c2ce222006-11-27 14:12:17 +010039#if defined(CONFIG_FPGA)
Stefan Roese899620c2006-08-15 14:22:35 +020040
41#ifdef FPGA_DEBUG
42#define PRINTF(fmt,args...) printf (fmt ,##args)
43#else
44#define PRINTF(fmt,args...)
45#endif
46
Stefan Roese1c2ce222006-11-27 14:12:17 +010047static unsigned long regval;
Stefan Roese899620c2006-08-15 14:22:35 +020048
Stefan Roese1c2ce222006-11-27 14:12:17 +010049#define SET_GPIO_REG_0(reg, bit) { \
50 regval = in32(reg); \
51 regval &= ~(0x80000000 >> bit); \
52 out32(reg, regval); \
53 }
Stefan Roese899620c2006-08-15 14:22:35 +020054
Stefan Roese1c2ce222006-11-27 14:12:17 +010055#define SET_GPIO_REG_1(reg, bit) { \
56 regval = in32(reg); \
57 regval |= (0x80000000 >> bit); \
58 out32(reg, regval); \
59 }
Stefan Roese899620c2006-08-15 14:22:35 +020060
Stefan Roese1c2ce222006-11-27 14:12:17 +010061#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit)
62#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit)
Stefan Roese899620c2006-08-15 14:22:35 +020063
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020064#define FPGA_PRG (0x80000000 >> CONFIG_SYS_GPIO_PROG_EN)
65#define FPGA_CONFIG (0x80000000 >> CONFIG_SYS_GPIO_CONFIG)
66#define FPGA_DATA (0x80000000 >> CONFIG_SYS_GPIO_DATA)
67#define FPGA_CLK (0x80000000 >> CONFIG_SYS_GPIO_CLK)
Stefan Roese1c2ce222006-11-27 14:12:17 +010068#define OLD_VAL (FPGA_PRG | FPGA_CONFIG)
Stefan Roese899620c2006-08-15 14:22:35 +020069
Stefan Roese1c2ce222006-11-27 14:12:17 +010070#define SET_FPGA(data) out32(GPIO0_OR, data)
Stefan Roese899620c2006-08-15 14:22:35 +020071
Stefan Roese1c2ce222006-11-27 14:12:17 +010072#define FPGA_WRITE_1 { \
73 SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \
74 SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
Stefan Roese899620c2006-08-15 14:22:35 +020075
Stefan Roese1c2ce222006-11-27 14:12:17 +010076#define FPGA_WRITE_0 { \
77 SET_FPGA(OLD_VAL | 0 | 0 ); /* set data to 0 */ \
78 SET_FPGA(OLD_VAL | FPGA_CLK | 0 );} /* set data to 1 */
Stefan Roese899620c2006-08-15 14:22:35 +020079
80/* Plattforminitializations */
81/* Here we have to set the FPGA Chain */
82/* PROGRAM_PROG_EN = HIGH */
83/* PROGRAM_SEL_DPR = LOW */
84int fpga_pre_fn (int cookie)
85{
86 unsigned long reg;
87
88 reg = in32(GPIO0_IR);
89 /* Enable the FPGA Chain */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020090 SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_PROG_EN);
91 SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_PROG_EN);
92 SET_GPIO_1(CONFIG_SYS_GPIO_PROG_EN);
93 SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_SEL_DPR);
94 SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_SEL_DPR);
95 SET_GPIO_0((CONFIG_SYS_GPIO_SEL_DPR));
Stefan Roese899620c2006-08-15 14:22:35 +020096
Stefan Roese1c2ce222006-11-27 14:12:17 +010097 /* initialize the GPIO Pins */
Stefan Roese899620c2006-08-15 14:22:35 +020098 /* output */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020099 SET_GPIO_0(CONFIG_SYS_GPIO_CLK);
100 SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_CLK);
101 SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CLK);
Stefan Roese899620c2006-08-15 14:22:35 +0200102
103 /* output */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200104 SET_GPIO_0(CONFIG_SYS_GPIO_DATA);
105 SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_DATA);
106 SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_DATA);
Stefan Roese899620c2006-08-15 14:22:35 +0200107
108 /* First we set STATUS to 0 then as an input */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200109 SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_STATUS);
110 SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_STATUS);
111 SET_GPIO_0(CONFIG_SYS_GPIO_STATUS);
112 SET_GPIO_REG_0(GPIO0_TCR, CONFIG_SYS_GPIO_STATUS);
113 SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_STATUS);
Stefan Roese899620c2006-08-15 14:22:35 +0200114
115 /* output */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200116 SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_CONFIG);
117 SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CONFIG);
118 SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG);
Stefan Roese899620c2006-08-15 14:22:35 +0200119
120 /* input */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200121 SET_GPIO_0(CONFIG_SYS_GPIO_CON_DON);
122 SET_GPIO_REG_0(GPIO0_TCR, CONFIG_SYS_GPIO_CON_DON);
123 SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CON_DON);
Stefan Roese899620c2006-08-15 14:22:35 +0200124
125 /* CONFIG = 0 STATUS = 0 -> FPGA in reset state */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200126 SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG);
Stefan Roese899620c2006-08-15 14:22:35 +0200127 return FPGA_SUCCESS;
128}
129
130/* Set the state of CONFIG Pin */
131int fpga_config_fn (int assert_config, int flush, int cookie)
132{
133 if (assert_config) {
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200134 SET_GPIO_1(CONFIG_SYS_GPIO_CONFIG);
Stefan Roese899620c2006-08-15 14:22:35 +0200135 } else {
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200136 SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG);
Stefan Roese899620c2006-08-15 14:22:35 +0200137 }
138 return FPGA_SUCCESS;
139}
140
141/* Returns the state of STATUS Pin */
142int fpga_status_fn (int cookie)
143{
144 unsigned long reg;
145
146 reg = in32(GPIO0_IR);
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200147 if (reg &= (0x80000000 >> CONFIG_SYS_GPIO_STATUS)) {
Stefan Roese899620c2006-08-15 14:22:35 +0200148 PRINTF("STATUS = HIGH\n");
149 return FPGA_FAIL;
150 }
151 PRINTF("STATUS = LOW\n");
152 return FPGA_SUCCESS;
153}
154
155/* Returns the state of CONF_DONE Pin */
156int fpga_done_fn (int cookie)
157{
158 unsigned long reg;
159 reg = in32(GPIO0_IR);
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200160 if (reg &= (0x80000000 >> CONFIG_SYS_GPIO_CON_DON)) {
Stefan Roese899620c2006-08-15 14:22:35 +0200161 PRINTF("CONF_DON = HIGH\n");
162 return FPGA_FAIL;
163 }
164 PRINTF("CONF_DON = LOW\n");
165 return FPGA_SUCCESS;
166}
167
168/* writes the complete buffer to the FPGA
Stefan Roese1c2ce222006-11-27 14:12:17 +0100169 writing the complete buffer in one function is much faster,
Stefan Roese899620c2006-08-15 14:22:35 +0200170 then calling it for every bit */
171int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
172{
173 size_t bytecount = 0;
174 unsigned char *data = (unsigned char *) buf;
175 unsigned char val=0;
176 int i;
Stefan Roese1c2ce222006-11-27 14:12:17 +0100177 int len_40 = len / 40;
Stefan Roese899620c2006-08-15 14:22:35 +0200178
179 while (bytecount < len) {
Stefan Roese1c2ce222006-11-27 14:12:17 +0100180 val = data[bytecount++];
Stefan Roese899620c2006-08-15 14:22:35 +0200181 i = 8;
182 do {
183 if (val & 0x01) {
184 FPGA_WRITE_1;
185 } else {
186 FPGA_WRITE_0;
187 }
188 val >>= 1;
189 i --;
190 } while (i > 0);
191
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200192#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
Stefan Roese1c2ce222006-11-27 14:12:17 +0100193 if (bytecount % len_40 == 0) {
Stefan Roese899620c2006-08-15 14:22:35 +0200194 putc ('.'); /* let them know we are alive */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200195#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
Stefan Roese1c2ce222006-11-27 14:12:17 +0100196 if (ctrlc ())
197 return FPGA_FAIL;
198#endif
199 }
Stefan Roese899620c2006-08-15 14:22:35 +0200200#endif
201 }
202 return FPGA_SUCCESS;
203}
204
205/* called, when programming is aborted */
206int fpga_abort_fn (int cookie)
207{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200208 SET_GPIO_1((CONFIG_SYS_GPIO_SEL_DPR));
Stefan Roese899620c2006-08-15 14:22:35 +0200209 return FPGA_SUCCESS;
210}
211
212/* called, when programming was succesful */
213int fpga_post_fn (int cookie)
214{
215 return fpga_abort_fn (cookie);
216}
217
218/* Note that these are pointers to code that is in Flash. They will be
219 * relocated at runtime.
220 */
221Altera_CYC2_Passive_Serial_fns fpga_fns = {
222 fpga_pre_fn,
223 fpga_config_fn,
224 fpga_status_fn,
225 fpga_done_fn,
226 fpga_write_fn,
227 fpga_abort_fn,
228 fpga_post_fn
229};
230
231Altera_desc fpga[CONFIG_FPGA_COUNT] = {
232 {Altera_CYC2,
233 passive_serial,
234 Altera_EP2C35_SIZE,
235 (void *) &fpga_fns,
236 NULL,
237 0}
238};
239
240/*
241 * Initialize the fpga. Return 1 on success, 0 on failure.
242 */
243int alpr_fpga_init (void)
244{
245 int i;
246
Peter Tyser6385b282009-09-21 11:20:32 -0500247 PRINTF ("%s:%d: Initialize FPGA interface\n", __FUNCTION__, __LINE__);
248 fpga_init ();
Stefan Roese899620c2006-08-15 14:22:35 +0200249
250 for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
251 PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i);
252 fpga_add (fpga_altera, &fpga[i]);
253 }
254 return 1;
255}
256
257#endif