blob: ae6828bd78895b68702d342d03b2ea7364b3130a [file] [log] [blame]
Stefano Babic79656d22012-02-22 00:24:40 +00001/*
2 * (C) Copyright 2012, Stefano Babic <sbabic@denx.de>
3 *
4 * Copyright (C) 2010 Freescale Semiconductor, Inc.
5 *
6 * Configuration settings for the MX53-EVK Freescale board.
7 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02008 * SPDX-License-Identifier: GPL-2.0+
Stefano Babic79656d22012-02-22 00:24:40 +00009 */
10
11#ifndef __CONFIG_H
12#define __CONFIG_H
13
14/* SOC type must be included before imx-regs.h */
15#define CONFIG_MX53
16#include <asm/arch/imx-regs.h>
Stefano Babic79656d22012-02-22 00:24:40 +000017
Stefano Babic79656d22012-02-22 00:24:40 +000018#define CONFIG_DISPLAY_CPUINFO
19#define CONFIG_DISPLAY_BOARDINFO
20
21#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
22#define CONFIG_SETUP_MEMORY_TAGS
23#define CONFIG_INITRD_TAG
24
25#define CONFIG_OF_LIBFDT
26
27/* Size of malloc() pool */
28#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
29
30#define CONFIG_BOARD_EARLY_INIT_F
31
32/* Enable GPIOs */
33#define CONFIG_MXC_GPIO
34
35/* UART */
36#define CONFIG_MXC_UART
37#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR
38
39/* MMC */
40#define CONFIG_FSL_ESDHC
41#define CONFIG_SYS_FSL_ESDHC_ADDR 0
42#define CONFIG_SYS_FSL_ESDHC_NUM 1
43
44#define CONFIG_MMC
45#define CONFIG_GENERIC_MMC
46#define CONFIG_DOS_PARTITION
47
48/* Ethernet on FEC */
49#define CONFIG_NET_MULTI
50#define CONFIG_MII
Stefano Babic79656d22012-02-22 00:24:40 +000051
52#define CONFIG_FEC_MXC
53#define IMX_FEC_BASE FEC_BASE_ADDR
54#define CONFIG_FEC_MXC_PHYADDR 0x01
55#define CONFIG_PHY_ADDR CONFIG_FEC_MXC_PHYADDR
56#define CONFIG_RESET_PHY_R
57#define CONFIG_FEC_MXC_NO_ANEG
Ashok Kumar Reddyb85705e2012-09-05 22:09:37 +053058#define CONFIG_ETHPRIME "FEC0"
Stefano Babic79656d22012-02-22 00:24:40 +000059
60/* SPI */
61#define CONFIG_HARD_SPI
62#define CONFIG_MXC_SPI
63#define CONFIG_DEFAULT_SPI_BUS 1
64#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
65
66/* SPI FLASH - not used for environment */
67#define CONFIG_SPI_FLASH
68#define CONFIG_SPI_FLASH_STMICRO
Stefano Babic79656d22012-02-22 00:24:40 +000069#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
70#define CONFIG_SF_DEFAULT_SPEED 25000000
71
72/* allow to overwrite serial and ethaddr */
73#define CONFIG_ENV_OVERWRITE
74#define CONFIG_CONS_INDEX 1
75#define CONFIG_BAUDRATE 115200
Stefano Babic79656d22012-02-22 00:24:40 +000076
77/* Command definition */
78#include <config_cmd_default.h>
79#define CONFIG_CMD_PING
80#define CONFIG_CMD_DHCP
81#define CONFIG_CMD_MII
82#define CONFIG_CMD_MMC
83#define CONFIG_CMD_FAT
84#define CONFIG_CMD_EXT2
85#define CONFIG_CMD_MTDPARTS
86#define CONFIG_CMD_SPI
87#define CONFIG_CMD_SF
88#define CONFIG_CMD_GPIO
89
90#define CONFIG_BOOTDELAY 3
91
92#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */
93#define CONFIG_SYS_TEXT_BASE 0xf0001400 /* uboot in nor flash */
94
95#define CONFIG_ARP_TIMEOUT 200UL
96
97/* Miscellaneous configurable options */
98#define CONFIG_SYS_LONGHELP /* undef to save memory */
99#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
Stefano Babic79656d22012-02-22 00:24:40 +0000100#define CONFIG_SYS_PROMPT "IMA3 MX53 U-Boot > "
101#define CONFIG_AUTO_COMPLETE
102#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
103
104/* Print Buffer Size */
105#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
106#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
107#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
108
109#define CONFIG_SYS_MEMTEST_START 0x70000000
110#define CONFIG_SYS_MEMTEST_END 0x10000
111
112#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
113
114#define CONFIG_SYS_HZ 1000
115#define CONFIG_CMDLINE_EDITING
116
Stefano Babic79656d22012-02-22 00:24:40 +0000117/* Physical Memory Map */
118#define CONFIG_NR_DRAM_BANKS 1
119#define PHYS_SDRAM_1 CSD0_BASE_ADDR
120#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)
121
122#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
123#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
124#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
125
126#define CONFIG_SYS_INIT_SP_OFFSET \
127 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
128#define CONFIG_SYS_INIT_SP_ADDR \
129 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
130
131#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
132#define MTDIDS_DEFAULT "nor0=f0000000.flash"
133
134/* FLASH and environment organization */
135
136#define CONFIG_SYS_FLASH_BASE 0xF0000000
137#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */
138#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */
139#define CONFIG_FLASH_CFI_MTD /* with MTD support */
140#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
141#define CONFIG_SYS_MAX_FLASH_BANKS 1
142#define CONFIG_SYS_MAX_FLASH_SECT 1024
143
144#define CONFIG_SYS_FLASH_EMPTY_INFO
145#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
146
147#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
148#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
149
150#define CONFIG_ENV_SIZE (8 * 1024)
151#define CONFIG_ENV_IS_IN_FLASH
152#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
153 CONFIG_SYS_MONITOR_LEN)
154#define CONFIG_ENV_SECT_SIZE 0x20000
155#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
156 CONFIG_ENV_SECT_SIZE)
157#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
158
159/*
160 * Default environment and default scripts
161 * to update uboot and load kernel
162 */
163
164#define HOSTNAME ima3-mx53
Stefano Babic79656d22012-02-22 00:24:40 +0000165
166#define CONFIG_HOSTNAME ima3-mx53
167#define CONFIG_EXTRA_ENV_SETTINGS \
168 "netdev=eth0\0" \
169 "nfsargs=setenv bootargs root=/dev/nfs rw " \
170 "nfsroot=${serverip}:${rootpath}\0" \
171 "ramargs=setenv bootargs root=/dev/ram0 rw\0" \
172 "addip_sta=setenv bootargs ${bootargs} " \
173 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
174 ":${hostname}:${netdev}:off panic=1\0" \
175 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
176 "addip=if test -n ${ipdyn};then run addip_dyn;" \
177 "else run addip_sta;fi\0" \
178 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
179 "addtty=setenv bootargs ${bootargs}" \
180 " console=${console},${baudrate}\0" \
181 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
182 "console=ttymxc3\0" \
183 "loadaddr=70800000\0" \
184 "kernel_addr_r=70800000\0" \
185 "ramdisk_addr_r=71000000\0" \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200186 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
187 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
188 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
Stefano Babic79656d22012-02-22 00:24:40 +0000189 "mmcargs=setenv bootargs root=${mmcroot} " \
190 "rootfstype=${mmcrootfstype}\0" \
191 "mmcroot=/dev/mmcblk0p3 rw\0" \
192 "mmcboot=echo Booting from mmc ...; " \
193 "run mmcargs addip addtty addmtd addmisc mmcload;" \
194 "bootm\0" \
195 "mmcload=fatload mmc ${mmcdev}:${mmcpart} " \
196 "${loadaddr} ${uimage}\0" \
197 "mmcrootfstype=ext3 rootwait\0" \
198 "flash_self=run ramargs addip addtty addmtd addmisc;" \
199 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
200 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
201 "bootm ${kernel_addr}\0" \
202 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
203 "run nfsargs addip addtty addmtd addmisc;" \
204 "bootm ${kernel_addr_r}\0" \
205 "net_self_load=tftp ${ramdisk_addr_r} ${ramdisk_file};" \
206 "tftp ${kernel_addr_r} ${bootfile}\0" \
207 "net_self=if run net_self_load;then " \
208 "run ramargs addip addtty addmtd addmisc;" \
209 "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
210 "else echo Images not loades;fi\0" \
211 "satargs=setenv bootargs root=/dev/sda1\0" \
212 "satafile=boot/uImage\0" \
213 "ssdboot=echo Booting from ssd ...; " \
214 "run satargs addip addtty addmtd addmisc;" \
215 "sata init;ext2load sata 0:1 ${kernel_addr_r} " \
216 "${satafile};bootm\0" \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200217 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.imx\0" \
Stefano Babic79656d22012-02-22 00:24:40 +0000218 "uimage=uImage\0" \
219 "load=tftp ${loadaddr} ${u-boot}\0" \
220 "uboot_addr=0xf0001000\0" \
221 "update=protect off 0xf0000000 +60000;" \
222 "erase ${uboot_addr} +60000;" \
223 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
224 "upd=if run load;then echo Updating u-boot;if run update;" \
225 "then echo U-Boot updated;" \
226 "else echo Error updating u-boot !;" \
227 "echo Board without bootloader !!;" \
228 "fi;" \
229 "else echo U-Boot not downloaded..exiting;fi\0" \
230 "bootcmd=run net_nfs\0"
231
232
233#define CONFIG_CMD_SATA
234#ifdef CONFIG_CMD_SATA
235 #define CONFIG_DWC_AHSATA
236 #define CONFIG_SYS_SATA_MAX_DEVICE 1
237 #define CONFIG_DWC_AHSATA_PORT_ID 0
238 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
239 #define CONFIG_LBA48
240 #define CONFIG_LIBATA
241#endif
242
243#endif /* __CONFIG_H */