blob: 440c044f76eb9005134ea8ef7af278ca39d85da6 [file] [log] [blame]
Haavard Skinnemoend25ce7d2008-05-16 11:10:33 +02001/*
2 * SPI flash internal definitions
3 *
4 * Copyright (C) 2008 Atmel Corporation
5 */
6
Mike Frysinger1abe3652009-04-02 08:11:31 -04007/* Common parameters -- kind of high, but they should only occur when there
8 * is a problem (and well your system already is broken), so err on the side
9 * of caution in case we're dealing with slower SPI buses and/or processors.
10 */
11#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
12#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020013#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
Haavard Skinnemoend25ce7d2008-05-16 11:10:33 +020014
15/* Common commands */
16#define CMD_READ_ID 0x9f
17
18#define CMD_READ_ARRAY_SLOW 0x03
19#define CMD_READ_ARRAY_FAST 0x0b
20#define CMD_READ_ARRAY_LEGACY 0xe8
21
Mike Frysinger61630452011-01-10 02:20:12 -050022#define CMD_READ_STATUS 0x05
23
24/* Common status */
25#define STATUS_WIP 0x01
26
Haavard Skinnemoend25ce7d2008-05-16 11:10:33 +020027/* Send a single-byte command to the device and read the response */
28int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
29
30/*
31 * Send a multi-byte command to the device and read the response. Used
32 * for flash array reads, etc.
33 */
34int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
35 size_t cmd_len, void *data, size_t data_len);
36
37/*
38 * Send a multi-byte command to the device followed by (optional)
39 * data. Used for programming the flash array, etc.
40 */
41int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
42 const void *data, size_t data_len);
43
44/*
45 * Same as spi_flash_cmd_read() except it also claims/releases the SPI
46 * bus. Used as common part of the ->read() operation.
47 */
48int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
49 size_t cmd_len, void *data, size_t data_len);
50
Mike Frysinger61630452011-01-10 02:20:12 -050051/* Send a command to the device and wait for some bit to clear itself. */
52int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
53 u8 cmd, u8 poll_bit);
54
55/*
56 * Send the read status command to the device and wait for the wip
57 * (write-in-progress) bit to clear itself.
58 */
59int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);
60
Haavard Skinnemoend25ce7d2008-05-16 11:10:33 +020061/* Manufacturer-specific probe functions */
62struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
63struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
Chong Huangd1d906562010-11-30 03:33:25 -050064struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode);
Prafulla Wadaskar7ce60312009-04-06 21:24:43 +053065struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode);
Mike Frysinger1c587432009-03-27 19:27:58 -040066struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
TsiChung Liew7b7a8692008-08-06 16:08:41 -050067struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
Jason McMulland394a772009-10-09 17:12:23 -040068struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
Reinhard Meyere0987e22010-10-05 16:56:40 +020069struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);