blob: ff25f9297486baa379b10c56fcb259c56cd9104c [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001# SPDX-License-Identifier: GPL-2.0+
Tom Rinida58dec2015-11-10 01:06:16 +00002
Tom Rinia79115d2021-11-01 15:16:16 -04003VERSION = 2022
Tom Rini6e15cda2022-07-25 20:31:12 -04004PATCHLEVEL = 10
Wolfgang Denk211e4752012-07-10 09:21:12 +02005SUBLEVEL =
Tom Rini6e15cda2022-07-25 20:31:12 -04006EXTRAVERSION = -rc1
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +09007NAME =
Wolfgang Denkae6d1052008-01-13 00:59:21 +01008
Masahiro Yamada6825a952014-02-04 17:24:28 +09009# *DOCUMENTATION*
10# To see a list of typical targets execute "make help"
11# More info can be located in ./README
12# Comments in this file are targeted only to the developer, do not
13# expect to learn how to build the kernel reading this file.
14
Tom Rini473fc272021-06-17 18:07:25 -040015# Do not use make's built-in rules and variables
16# (this increases performance and avoids hard-to-debug behaviour)
17MAKEFLAGS += -rR
Masahiro Yamada6825a952014-02-04 17:24:28 +090018
Heinrich Schuchardtf7691a62021-02-10 18:54:25 +010019# Determine target architecture for the sandbox
Heinrich Schuchardt3b4847c2019-11-07 08:05:17 +010020include include/host_arch.h
Heinrich Schuchardtf7691a62021-02-10 18:54:25 +010021ifeq ("", "$(CROSS_COMPILE)")
22 MK_ARCH="${shell uname -m}"
23else
Mark Kettenis1a16e662022-05-05 16:42:23 +020024 MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^[[:space:]]*\([^\/]*\/\)*\([^-]*\)-[^[:space:]]*/\2/p'}"
Heinrich Schuchardtf7691a62021-02-10 18:54:25 +010025endif
Heinrich Schuchardt3b4847c2019-11-07 08:05:17 +010026unexport HOST_ARCH
27ifeq ("x86_64", $(MK_ARCH))
28 export HOST_ARCH=$(HOST_ARCH_X86_64)
29else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
30 export HOST_ARCH=$(HOST_ARCH_X86)
31else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
32 export HOST_ARCH=$(HOST_ARCH_AARCH64)
Heinrich Schuchardtecd4e5c2022-05-07 22:58:39 +020033else ifneq (,$(findstring $(MK_ARCH), "arm" "armv7" "armv7a" "armv7l"))
Heinrich Schuchardt3b4847c2019-11-07 08:05:17 +010034 export HOST_ARCH=$(HOST_ARCH_ARM)
35else ifeq ("riscv32", $(MK_ARCH))
36 export HOST_ARCH=$(HOST_ARCH_RISCV32)
37else ifeq ("riscv64", $(MK_ARCH))
38 export HOST_ARCH=$(HOST_ARCH_RISCV64)
39endif
40undefine MK_ARCH
41
Masahiro Yamada6825a952014-02-04 17:24:28 +090042# Avoid funny character set dependencies
43unexport LC_ALL
44LC_COLLATE=C
45LC_NUMERIC=C
46export LC_COLLATE LC_NUMERIC
47
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090048# Avoid interference with shell env settings
49unexport GREP_OPTIONS
50
Masahiro Yamada6825a952014-02-04 17:24:28 +090051# We are using a recursive build, so we need to do a little thinking
52# to get the ordering right.
53#
54# Most importantly: sub-Makefiles should only ever modify files in
55# their own directory. If in some directory we have a dependency on
56# a file in another dir (which doesn't happen often, but it's often
57# unavoidable when linking the built-in.o targets which finally
58# turn into vmlinux), we will call a sub make in that other dir, and
59# after that we are sure that everything which is in that other dir
60# is now up to date.
61#
62# The only cases where we need to modify files which have global
63# effects are thus separated out and done before the recursive
64# descending is started. They are now explicitly listed as the
65# prepare rule.
66
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090067# Beautify output
68# ---------------------------------------------------------------------------
69#
70# Normally, we echo the whole command before executing it. By making
71# that echo $($(quiet)$(cmd)), we now have the possibility to set
72# $(quiet) to choose other forms of output instead, e.g.
73#
74# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
75# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
76#
77# If $(quiet) is empty, the whole command will be printed.
78# If it is set to "quiet_", only the short version will be printed.
79# If it is set to "silent_", nothing will be printed at all, since
80# the variable $(silent_cmd_cc_o_c) doesn't exist.
81#
82# A simple variant is to prefix commands with $(Q) - that's useful
83# for commands that shall be hidden in non-verbose mode.
84#
85# $(Q)ln $@ :<
86#
87# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
88# If KBUILD_VERBOSE equals 1 then the above command is displayed.
89#
Masahiro Yamada6825a952014-02-04 17:24:28 +090090# To put more focus on warnings, be less verbose as default
91# Use 'make V=1' to see the full commands
92
93ifeq ("$(origin V)", "command line")
94 KBUILD_VERBOSE = $(V)
wdenk7ebf7442002-11-02 23:17:16 +000095endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090096ifndef KBUILD_VERBOSE
97 KBUILD_VERBOSE = 0
98endif
99
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900100ifeq ($(KBUILD_VERBOSE),1)
101 quiet =
102 Q =
103else
104 quiet=quiet_
105 Q = @
Masahiro Yamada6825a952014-02-04 17:24:28 +0900106endif
107
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900108# If the user is running make -s (silent mode), suppress echoing of
109# commands
110
111ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
112ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
113 quiet=silent_
114endif
115else # make-3.8x
116ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
117 quiet=silent_
118endif
Masahiro Yamada6825a952014-02-04 17:24:28 +0900119endif
120
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900121export quiet Q KBUILD_VERBOSE
Masahiro Yamada6825a952014-02-04 17:24:28 +0900122
Masahiro Yamada9e414032014-02-04 17:24:24 +0900123# kbuild supports saving output files in a separate directory.
124# To locate output files in a separate directory two syntaxes are supported.
125# In both cases the working directory must be the root of the kernel src.
126# 1) O=
127# Use "make O=dir/to/store/output/files/"
Marian Balakowiczf9328632006-09-01 19:49:50 +0200128#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900129# 2) Set KBUILD_OUTPUT
130# Set the environment variable KBUILD_OUTPUT to point to the directory
131# where the output files shall be placed.
132# export KBUILD_OUTPUT=dir/to/store/output/files/
133# make
Stefan Roese887e2ec2006-09-07 11:51:23 +0200134#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900135# The O= assignment takes precedence over the KBUILD_OUTPUT environment
136# variable.
wdenk7ebf7442002-11-02 23:17:16 +0000137
Masahiro Yamada9e414032014-02-04 17:24:24 +0900138# KBUILD_SRC is set on invocation of make in OBJ directory
139# KBUILD_SRC is not intended to be used by the regular user (for now)
140ifeq ($(KBUILD_SRC),)
141
142# OK, Make called in directory where kernel src resides
143# Do we want to locate output files in a separate directory?
Marian Balakowiczf9328632006-09-01 19:49:50 +0200144ifeq ("$(origin O)", "command line")
Masahiro Yamada9e414032014-02-04 17:24:24 +0900145 KBUILD_OUTPUT := $(O)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200146endif
wdenk7ebf7442002-11-02 23:17:16 +0000147
Masahiro Yamada9e414032014-02-04 17:24:24 +0900148# That's our default target when none is given on the command line
149PHONY := _all
150_all:
151
152# Cancel implicit rules on top Makefile
153$(CURDIR)/Makefile Makefile: ;
154
155ifneq ($(KBUILD_OUTPUT),)
156# Invoke a second make in the output directory, passing relevant variables
157# check that the output directory actually exists
158saved-output := $(KBUILD_OUTPUT)
Masahiro Yamada5a449d72014-03-24 13:55:27 +0900159KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
160 && /bin/pwd)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900161$(if $(KBUILD_OUTPUT),, \
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900162 $(error failed to create output directory "$(saved-output)"))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900163
Tom Rini473fc272021-06-17 18:07:25 -0400164# Look for make include files relative to root of kernel src
165#
166# This does not become effective immediately because MAKEFLAGS is re-parsed
167# once after the Makefile is read. It is OK since we are going to invoke
168# 'sub-make' below.
169MAKEFLAGS += --include-dir=$(CURDIR)
170
Masahiro Yamada9e414032014-02-04 17:24:24 +0900171PHONY += $(MAKECMDGOALS) sub-make
172
173$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
174 @:
175
176sub-make: FORCE
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900177 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
178 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900179
180# Leave processing to above invocation of make
181skip-makefile := 1
182endif # ifneq ($(KBUILD_OUTPUT),)
183endif # ifeq ($(KBUILD_SRC),)
184
185# We process the rest of the Makefile if this is the final invocation of make
186ifeq ($(skip-makefile),)
187
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900188# Do not print "Entering directory ...",
189# but we want to display it when entering to the output directory
190# so that IDEs/editors are able to understand relative filenames.
191MAKEFLAGS += --no-print-directory
192
193# Call a source code checker (by default, "sparse") as part of the
194# C compilation.
195#
196# Use 'make C=1' to enable checking of only re-compiled files.
197# Use 'make C=2' to enable checking of *all* source files, regardless
198# of whether they are re-compiled or not.
199#
Breno Matheus Lima656d8da2019-06-05 18:18:30 +0000200# See the file "doc/sparse.txt" for more details, including
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900201# where to get the "sparse" utility.
202
203ifeq ("$(origin C)", "command line")
204 KBUILD_CHECKSRC = $(C)
205endif
206ifndef KBUILD_CHECKSRC
207 KBUILD_CHECKSRC = 0
208endif
209
210# Use make M=dir to specify directory of external module to build
211# Old syntax make ... SUBDIRS=$PWD is still supported
212# Setting the environment variable KBUILD_EXTMOD take precedence
213ifdef SUBDIRS
214 KBUILD_EXTMOD ?= $(SUBDIRS)
215endif
216
217ifeq ("$(origin M)", "command line")
218 KBUILD_EXTMOD := $(M)
219endif
220
Masahiro Yamada6825a952014-02-04 17:24:28 +0900221# If building an external module we do not care about the all: rule
222# but instead _all depend on modules
Masahiro Yamada9e414032014-02-04 17:24:24 +0900223PHONY += all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900224ifeq ($(KBUILD_EXTMOD),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900225_all: all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900226else
227_all: modules
228endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900229
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900230ifeq ($(KBUILD_SRC),)
231 # building in the source tree
232 srctree := .
233else
234 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
235 # building in a subdirectory of the source tree
236 srctree := ..
237 else
238 srctree := $(KBUILD_SRC)
239 endif
240endif
241objtree := .
Masahiro Yamada9e414032014-02-04 17:24:24 +0900242src := $(srctree)
243obj := $(objtree)
244
245VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
246
247export srctree objtree VPATH
248
Wolfgang Denk5013c092008-03-02 22:45:33 +0100249# Make sure CDPATH settings don't interfere
250unexport CDPATH
251
Marian Balakowiczf9328632006-09-01 19:49:50 +0200252#########################################################################
253
wdenk7ebf7442002-11-02 23:17:16 +0000254HOSTARCH := $(shell uname -m | \
255 sed -e s/i.86/x86/ \
256 -e s/sun4u/sparc64/ \
257 -e s/arm.*/arm/ \
258 -e s/sa110/arm/ \
259 -e s/ppc64/powerpc/ \
260 -e s/ppc/powerpc/ \
261 -e s/macppc/powerpc/\
262 -e s/sh.*/sh/)
263
264HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
265 sed -e 's/\(cygwin\).*/cygwin/')
266
267export HOSTARCH HOSTOS
268
wdenk7ebf7442002-11-02 23:17:16 +0000269#########################################################################
Marian Balakowiczf9328632006-09-01 19:49:50 +0200270
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400271# set default to nothing for native builds
Wolfgang Denka5284ef2007-03-06 18:01:47 +0100272ifeq ($(HOSTARCH),$(ARCH))
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400273CROSS_COMPILE ?=
wdenk7ebf7442002-11-02 23:17:16 +0000274endif
wdenk7ebf7442002-11-02 23:17:16 +0000275
Masahiro Yamada51148792014-07-30 14:08:17 +0900276KCONFIG_CONFIG ?= .config
277export KCONFIG_CONFIG
278
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900279# SHELL used by kbuild
280CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
281 else if [ -x /bin/bash ]; then echo /bin/bash; \
282 else echo sh; fi ; fi)
283
Tom Rini587e4a42020-03-27 11:46:27 -0400284HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
285HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
286HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
287
Jeroen Hofsteeb477fe42014-09-10 20:08:51 +0200288HOSTCC = cc
289HOSTCXX = c++
Tom Rini587e4a42020-03-27 11:46:27 -0400290KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
Simon Glassb47ef6b2020-07-19 13:56:08 -0600291 $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
Tom Rini587e4a42020-03-27 11:46:27 -0400292KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
293KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
294KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900295
Philipp Tomsich9de4f952018-05-14 15:22:06 +0200296# With the move to GCC 6, we have implicitly upgraded our language
297# standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
298# Some Linux distributions (including RHEL7, SLES13, Debian 8) still
299# have older compilers as their default, so we make it explicit for
300# these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
Tom Rinifa893992018-06-19 23:53:54 -0400301CSTD_FLAG := -std=gnu11
Tom Rini587e4a42020-03-27 11:46:27 -0400302KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
Philipp Tomsich9de4f952018-05-14 15:22:06 +0200303
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900304ifeq ($(HOSTOS),cygwin)
Tom Rini587e4a42020-03-27 11:46:27 -0400305KBUILD_HOSTCFLAGS += -ansi
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900306endif
307
308# Mac OS X / Darwin's C preprocessor is Apple specific. It
309# generates numerous errors and warnings. We want to bypass it
310# and use GNU C's cpp. To do this we pass the -traditional-cpp
311# option to the compiler. Note that the -traditional-cpp flag
312# DOES NOT have the same semantics as GNU C's flag, all it does
313# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
314#
315# Apple's linker is similar, thanks to the new 2 stage linking
316# multiple symbol definitions are treated as errors, hence the
317# -multiply_defined suppress option to turn off this error.
318#
319ifeq ($(HOSTOS),darwin)
320# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
321DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
322DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
323
324os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
325 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
326
默默ab8fc412019-03-31 16:07:03 +0800327os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
Wolfgang Denk0a50b3c2021-09-27 17:42:38 +0200328 $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
默默ab8fc412019-03-31 16:07:03 +0800329
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900330# Snow Leopards build environment has no longer restrictions as described above
331HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
Tom Rini587e4a42020-03-27 11:46:27 -0400332KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
333KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
Andreas Bießmann1fddd7b2015-02-09 00:06:10 +0100334
Wolfgang Denk0a50b3c2021-09-27 17:42:38 +0200335# macOS Mojave (10.14.X)
默默ab8fc412019-03-31 16:07:03 +0800336# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
Tom Rini587e4a42020-03-27 11:46:27 -0400337KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900338endif
339
Masahiro Yamada6825a952014-02-04 17:24:28 +0900340# Decide whether to build built-in, modular, or both.
341# Normally, just do built-in.
342
343KBUILD_MODULES :=
344KBUILD_BUILTIN := 1
345
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900346# If we have only "make modules", don't compile built-in objects.
347# When we're building modules with modversions, we need to consider
348# the built-in objects during the descend as well, in order to
349# make sure the checksums are up to date before we record them.
Masahiro Yamada6825a952014-02-04 17:24:28 +0900350
351ifeq ($(MAKECMDGOALS),modules)
352 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
353endif
354
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900355# If we have "make <whatever> modules", compile modules
356# in addition to whatever we do anyway.
357# Just "make" or "make all" shall build modules as well
Masahiro Yamada6825a952014-02-04 17:24:28 +0900358
359# U-Boot does not need modules
360#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
361# KBUILD_MODULES := 1
362#endif
363
364#ifeq ($(MAKECMDGOALS),)
365# KBUILD_MODULES := 1
366#endif
367
Simon Glassb51882d2019-09-25 08:56:28 -0600368# Check ths size of a binary:
369# Args:
370# $1: File to check
371# #2: Size limit in bytes (decimal or 0xhex)
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200372define size_check
373 actual=$$( wc -c $1 | awk '{print $$1}'); \
374 limit=$$( printf "%d" $2 ); \
375 if test $$actual -gt $$limit; then \
376 echo "$1 exceeds file size limit:" >&2; \
Tom Rini90037eb2019-10-23 15:39:41 -0400377 echo " limit: $$(printf %#x $$limit) bytes" >&2; \
Simon Glassb51882d2019-09-25 08:56:28 -0600378 echo " actual: $$(printf %#x $$actual) bytes" >&2; \
379 echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200380 exit 1; \
381 fi
382endef
383export size_check
384
Masahiro Yamada6825a952014-02-04 17:24:28 +0900385export KBUILD_MODULES KBUILD_BUILTIN
386export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
387
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900388# We need some generic definitions (do not try to remake the file).
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900389scripts/Kbuild.include: ;
390include scripts/Kbuild.include
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900391
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900392# Make variables (CC, etc...)
393
394AS = $(CROSS_COMPILE)as
395# Always use GNU ld
396ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
397LD = $(CROSS_COMPILE)ld.bfd
398else
399LD = $(CROSS_COMPILE)ld
400endif
401CC = $(CROSS_COMPILE)gcc
402CPP = $(CC) -E
403AR = $(CROSS_COMPILE)ar
404NM = $(CROSS_COMPILE)nm
405LDR = $(CROSS_COMPILE)ldr
406STRIP = $(CROSS_COMPILE)strip
407OBJCOPY = $(CROSS_COMPILE)objcopy
408OBJDUMP = $(CROSS_COMPILE)objdump
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200409LEX = flex
410YACC = bison
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900411AWK = awk
Masahiro Yamadaf77d7092014-05-12 11:45:55 +0900412PERL = perl
Stefano Babicb48bfc72017-04-05 17:46:41 +0200413PYTHON ?= python
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200414PYTHON2 = python2
Andrey Zhizhikinf68ed0b2021-05-01 22:12:21 +0200415PYTHON3 ?= python3
Simon Glass93b19652021-09-22 11:34:44 -0600416
417# The devicetree compiler and pylibfdt are automatically built unless DTC is
418# provided. If DTC is provided, it is assumed the pylibfdt is available too.
419DTC_INTREE := $(objtree)/scripts/dtc/dtc
420DTC ?= $(DTC_INTREE)
421DTC_MIN_VERSION := 010406
422
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900423CHECK = sparse
424
425CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
426 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
427
Masahiro Yamada3b612972014-08-31 15:16:53 +0900428KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900429
430KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
431 -Wno-format-security \
Tom Rinifa893992018-06-19 23:53:54 -0400432 -fno-builtin -ffreestanding $(CSTD_FLAG)
Bin Meng5bc11922018-09-16 22:35:28 -0700433KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900434KBUILD_AFLAGS := -D__ASSEMBLY__
Tom Rini587e4a42020-03-27 11:46:27 -0400435KBUILD_LDFLAGS :=
436
437ifeq ($(cc-name),clang)
438ifneq ($(CROSS_COMPILE),)
439CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
440GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
441CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
442GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
443endif
444ifneq ($(GCC_TOOLCHAIN),)
445CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
446endif
447KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
448KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
449KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
450KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
451endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900452
Andy Shevchenko6ace36e2018-08-06 19:00:22 +0300453# Don't generate position independent code
454KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
455KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
456
Masahiro Yamada74241452014-02-24 11:12:09 +0900457# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
458UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
459UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +0900460
Masahiro Yamada74241452014-02-24 11:12:09 +0900461export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900462export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
Tom Rini587e4a42020-03-27 11:46:27 -0400463export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
464export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200465export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
Tom Rini587e4a42020-03-27 11:46:27 -0400466export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900467
Tom Rini587e4a42020-03-27 11:46:27 -0400468export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900469export KBUILD_CFLAGS KBUILD_AFLAGS
470
Tom Rini5972ff02020-03-11 18:11:17 -0400471export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
472
Masahiro Yamada6825a952014-02-04 17:24:28 +0900473# When compiling out-of-tree modules, put MODVERDIR in the module
474# tree rather than in the kernel tree. The kernel tree might
475# even be read-only.
476export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
477
478# Files to ignore in find ... statements
479
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900480export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
481 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
482 -prune -o
Masahiro Yamada6825a952014-02-04 17:24:28 +0900483export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
484 --exclude CVS --exclude .pc --exclude .hg --exclude .git
485
486# ===========================================================================
487# Rules shared between *config targets and build targets
488
489# Basic helpers built in scripts/
490PHONY += scripts_basic
491scripts_basic:
492 $(Q)$(MAKE) $(build)=scripts/basic
493 $(Q)rm -f .tmp_quiet_recordmcount
494
495# To avoid any implicit rule to kick in, define an empty command.
496scripts/basic/%: scripts_basic ;
497
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900498PHONY += outputmakefile
499# outputmakefile generates a Makefile in the output directory, if using a
500# separate output directory. This allows convenient use of make in the
501# output directory.
502outputmakefile:
503ifneq ($(KBUILD_SRC),)
504 $(Q)ln -fsn $(srctree) source
Tom Rini473fc272021-06-17 18:07:25 -0400505 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900506endif
507
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900508# To make sure we do not include .config for any of the *config targets
509# catch them early, and hand them over to scripts/kconfig/Makefile
510# It is allowed to specify more targets when calling make, including
511# mixing *config targets and build targets.
512# For example 'make oldconfig all'.
513# Detect when mixed targets is specified, and make a second invocation
514# of make so .config is not included in this case either (for *config).
Masahiro Yamada6825a952014-02-04 17:24:28 +0900515
Masahiro Yamada74241452014-02-24 11:12:09 +0900516version_h := include/generated/version_autogenerated.h
517timestamp_h := include/generated/timestamp_autogenerated.h
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +0100518defaultenv_h := include/generated/defaultenv_autogenerated.h
Michal Simekdacec832020-02-18 15:03:13 +0100519dt_h := include/generated/dt.h
Simon Glass86b9c3e2021-10-21 21:08:46 -0600520env_h := include/generated/environment.h
Masahiro Yamada74241452014-02-24 11:12:09 +0900521
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900522no-dot-config-targets := clean clobber mrproper distclean \
Masahiro Yamada27651182014-02-21 15:45:11 +0900523 help %docs check% coccicheck \
Simon Glassf44a52a2022-02-11 13:23:24 -0700524 ubootversion backup tests check qcheck tcheck pylint \
525 pylint_err
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900526
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900527config-targets := 0
528mixed-targets := 0
529dot-config := 1
530
531ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
532 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
533 dot-config := 0
534 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900535endif
536
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900537ifeq ($(KBUILD_EXTMOD),)
538 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
539 config-targets := 1
Masahiro Yamada98bd0e02015-07-05 01:56:55 +0900540 ifneq ($(words $(MAKECMDGOALS)),1)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900541 mixed-targets := 1
542 endif
543 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900544endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900545
546ifeq ($(mixed-targets),1)
547# ===========================================================================
548# We're called with mixed targets (*config and build targets).
549# Handle them one by one.
550
Masahiro Yamadae7734402014-08-05 15:56:44 +0900551PHONY += $(MAKECMDGOALS) __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900552
Masahiro Yamadae7734402014-08-05 15:56:44 +0900553$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900554 @:
555
Masahiro Yamadae7734402014-08-05 15:56:44 +0900556__build_one_by_one:
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900557 $(Q)set -e; \
558 for i in $(MAKECMDGOALS); do \
559 $(MAKE) -f $(srctree)/Makefile $$i; \
560 done
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900561
562else
563ifeq ($(config-targets),1)
564# ===========================================================================
565# *config targets only - make sure prerequisites are updated, and descend
566# in scripts/kconfig to make the *config target
567
Masahiro Yamada51148792014-07-30 14:08:17 +0900568KBUILD_DEFCONFIG := sandbox_defconfig
569export KBUILD_DEFCONFIG KBUILD_KCONFIG
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900570
Masahiro Yamada51148792014-07-30 14:08:17 +0900571config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900572 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada51148792014-07-30 14:08:17 +0900573
574%config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900575 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900576
577else
578# ===========================================================================
579# Build targets only - this includes vmlinux, arch specific targets, clean
580# targets and others. In general all targets except *config targets.
581
Masahiro Yamada61304db2017-01-30 11:12:07 +0900582# Additional helpers built in scripts/
583# Carefully list dependencies so we do not try to build scripts twice
584# in parallel
585PHONY += scripts
Tom Rini473fc272021-06-17 18:07:25 -0400586scripts: scripts_basic scripts_dtc include/config/auto.conf
Masahiro Yamada61304db2017-01-30 11:12:07 +0900587 $(Q)$(MAKE) $(build)=$(@)
588
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900589ifeq ($(dot-config),1)
590# Read in config
Masahiro Yamada51148792014-07-30 14:08:17 +0900591-include include/config/auto.conf
592
593# Read in dependencies to all Kconfig* files, make sure to run
594# oldconfig if changes are detected.
595-include include/config/auto.conf.cmd
596
597# To avoid any implicit rule to kick in, define an empty command
598$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
599
600# If .config is newer than include/config/auto.conf, someone tinkered
601# with it and forgot to run make oldconfig.
602# if auto.conf.cmd is missing then we are probably in a cleaned tree so
603# we execute the config step to be sure to catch updated Kconfig files
604include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200605 $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900606 @# If the following part fails, include/config/auto.conf should be
607 @# deleted so "make silentoldconfig" will be re-run on the next build.
608 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
609 { rm -f include/config/auto.conf; false; }
610 @# include/config.h has been updated after "make silentoldconfig".
611 @# We need to touch include/config/auto.conf so it gets newer
612 @# than include/config.h.
613 @# Otherwise, 'make silentoldconfig' would be invoked twice.
614 $(Q)touch include/config/auto.conf
Masahiro Yamada51148792014-07-30 14:08:17 +0900615
Masahiro Yamada0b588de2019-01-10 23:11:39 +0900616u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
Philipp Tomsich0d982c52017-07-05 17:30:40 +0200617 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
618
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900619-include include/autoconf.mk
620-include include/autoconf.mk.dep
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900621
Masahiro Yamada51148792014-07-30 14:08:17 +0900622# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
623# is up-to-date. When we switch to a different board configuration, old CONFIG
624# macros are still remaining in include/config/auto.conf. Without the following
625# gimmick, wrong config.mk would be included leading nasty warnings/errors.
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900626ifneq ($(wildcard $(KCONFIG_CONFIG)),)
627ifneq ($(wildcard include/config/auto.conf),)
628autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
629 include/config/auto.conf)
630ifeq ($(autoconf_is_old),)
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900631include config.mk
632include arch/$(ARCH)/Makefile
Masahiro Yamadaced07152014-02-04 17:24:21 +0900633endif
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900634endif
635endif
Simon Glassfada9e22013-04-20 08:42:36 +0000636
Simon Glassbb1ae552016-11-07 08:47:07 -0700637# These are set by the arch-specific config.mk. Make sure they are exported
638# so they can be used when building an EFI application.
639export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
640export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
641export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
642export CFLAGS_EFI # Compiler flags to add when building EFI app
643export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
644export EFI_TARGET # binutils target if EFI is natively supported
645
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000646# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
647# that (or fail if absent). Otherwise, search for a linker script in a
648# standard location.
649
650ifndef LDSCRIPT
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900651 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000652 ifdef CONFIG_SYS_LDSCRIPT
653 # need to strip off double quotes
Masahiro Yamada4a377552014-02-25 19:26:48 +0900654 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000655 endif
656endif
657
Simon Glassee601972011-11-21 10:49:37 +0000658# If there is no specified link script, we look in a number of places for it
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000659ifndef LDSCRIPT
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000660 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900661 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000662 endif
663 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900664 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000665 endif
666 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900667 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
Simon Glassee601972011-11-21 10:49:37 +0000668 endif
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000669endif
670
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900671else
Masahiro Yamada51148792014-07-30 14:08:17 +0900672# Dummy target needed, because used as prerequisite
673include/config/auto.conf: ;
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900674endif # $(dot-config)
675
Heinrich Schuchardt9b78c922022-06-16 13:43:50 +0200676ifdef CONFIG_CC_OPTIMIZE_FOR_DEBUG
677KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -Og -g -fomit-frame-pointer \
678 $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
679KBUILD_HOSTCXXFLAGS := -Og -g $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
680endif
681
Chris Zankelde5e5ce2016-08-10 18:36:43 +0300682#
683# Xtensa linker script cannot be preprocessed with -ansi because of
684# preprocessor operations on strings that don't make C identifiers.
685#
686ifeq ($(CONFIG_XTENSA),)
687LDPPFLAGS += -ansi
688endif
689
Masahiro Yamada4a8ed8e2014-08-22 19:42:29 +0900690ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
691KBUILD_CFLAGS += -Os
Sean Andersonf38cb2a2022-02-22 12:19:24 -0500692endif
693
694ifdef CONFIG_CC_OPTIMIZE_FOR_SPEED
Masahiro Yamada4a8ed8e2014-08-22 19:42:29 +0900695KBUILD_CFLAGS += -O2
696endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900697
Sean Andersone9765042022-02-22 12:19:25 -0500698ifdef CONFIG_CC_OPTIMIZE_FOR_DEBUG
699KBUILD_CFLAGS += -Og
700endif
701
Marek Behúnc1094982021-05-20 13:24:03 +0200702LTO_CFLAGS :=
703LTO_FINAL_LDFLAGS :=
704export LTO_CFLAGS LTO_FINAL_LDFLAGS
705ifdef CONFIG_LTO
706 ifeq ($(cc-name),clang)
707 LTO_CFLAGS += -flto
708 LTO_FINAL_LDFLAGS += -flto
709
710 AR = $(shell $(CC) -print-prog-name=llvm-ar)
711 NM = $(shell $(CC) -print-prog-name=llvm-nm)
712 else
713 NPROC := $(shell nproc 2>/dev/null || echo 1)
714 LTO_CFLAGS += -flto=$(NPROC)
715 LTO_FINAL_LDFLAGS += -fuse-linker-plugin -flto=$(NPROC)
716
717 # use plugin aware tools
718 AR = $(CROSS_COMPILE)gcc-ar
719 NM = $(CROSS_COMPILE)gcc-nm
720 endif
721
722 CFLAGS_NON_EFI += $(LTO_CFLAGS)
723
724 KBUILD_CFLAGS += $(LTO_CFLAGS)
725endif
726
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200727ifeq ($(CONFIG_STACKPROTECTOR),y)
728KBUILD_CFLAGS += $(call cc-option,-fstack-protector-strong)
729CFLAGS_EFI += $(call cc-option,-fno-stack-protector)
730else
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900731KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200732endif
Prabhakar Kushwaha687a7512015-07-02 12:00:17 +0530733KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900734
Tom Rini473fc272021-06-17 18:07:25 -0400735# disable pointer signed / unsigned warnings in gcc 4.0
736KBUILD_CFLAGS += -Wno-pointer-sign
737
Tom Rini587e4a42020-03-27 11:46:27 -0400738# disable stringop warnings in gcc 8+
739KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
740
Tom Rinic48b7812021-05-03 16:48:57 -0400741KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
742KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
743KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
744
Tom Rini443f2232020-05-14 08:30:02 -0400745# Enabled with W=2, disabled by default as noisy
746KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
747
Masahiro Yamada1eb2e712018-04-16 13:18:31 +0900748# change __FILE__ to the relative path from the srctree
749KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
750
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900751KBUILD_CFLAGS += -g
752# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
753# option to the assembler.
754KBUILD_AFLAGS += -g
755
756# Report stack usage if supported
Alexey Brodkin948071b2018-04-02 12:18:02 +0300757# ARC tools based on GCC 7.1 has an issue with stack usage
758# with naked functions, see commit message for more details
759ifndef CONFIG_ARC
Masahiro Yamada5b1f1f42013-12-11 20:11:34 +0900760ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
761 KBUILD_CFLAGS += -fstack-usage
762endif
Alexey Brodkin948071b2018-04-02 12:18:02 +0300763endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900764
765KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
Andy Shevchenko53dc8ae2019-11-29 19:47:59 +0200766KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
767
Tom Rini473fc272021-06-17 18:07:25 -0400768ifdef CONFIG_CC_IS_CLANG
Tom Rini4760fe22018-04-22 10:20:50 -0400769KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
770KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
771KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
Tom Rini587e4a42020-03-27 11:46:27 -0400772KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
773# Quiet clang warning: comparison of unsigned expression < 0 is always false
774KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
775# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
776# source of a reference will be _MergedGlobals and not on of the whitelisted names.
777# See modpost pattern 2
778KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
Tom Rini4760fe22018-04-22 10:20:50 -0400779KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
Tom Rini473fc272021-06-17 18:07:25 -0400780endif
Tom Rini587e4a42020-03-27 11:46:27 -0400781
782# These warnings generated too much noise in a regular build.
783# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
784KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900785
Masahiro Yamada65bb6d82014-04-18 19:09:51 +0900786# Prohibit date/time macros, which would make the build non-deterministic
787KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
788
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900789include scripts/Makefile.extrawarn
Masahiro Yamada6419e142014-08-05 15:56:43 +0900790
Masahiro Yamada0e6256d2014-04-15 14:47:40 +0900791# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
792KBUILD_CPPFLAGS += $(KCPPFLAGS)
793KBUILD_AFLAGS += $(KAFLAGS)
794KBUILD_CFLAGS += $(KCFLAGS)
795
Simon Glassb47ef6b2020-07-19 13:56:08 -0600796KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
797
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900798# Use UBOOTINCLUDE when you must reference the include/ directory.
799# Needed to be compatible with the O= option
Masahiro Yamadaf5c66bd2014-03-11 11:05:18 +0900800UBOOTINCLUDE := \
Heinrich Schuchardt0053d262020-04-10 11:10:32 +0200801 -Iinclude \
802 $(if $(KBUILD_SRC), -I$(srctree)/include) \
803 $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
804 $(if $(CONFIG_HAS_THUMB2), \
805 $(if $(CONFIG_CPU_V7M), \
806 -I$(srctree)/arch/arm/thumb1/include), \
807 -I$(srctree)/arch/arm/thumb1/include)) \
808 -I$(srctree)/arch/$(ARCH)/include \
809 -include $(srctree)/include/linux/kconfig.h
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900810
811NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900812
813# FIX ME
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900814cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
815 $(NOSTDINC_FLAGS)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900816c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
817
wdenk7ebf7442002-11-02 23:17:16 +0000818#########################################################################
819# U-Boot objects....order is important (i.e. start must be first)
820
Masahiro Yamada9e414032014-02-04 17:24:24 +0900821HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200822
Simon Glass5f57b002021-07-10 21:14:22 -0600823libs-$(CONFIG_API) += api/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900824libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
Simon Glass19a91f22021-10-14 12:47:54 -0600825libs-y += boot/
Simon Glass5f57b002021-07-10 21:14:22 -0600826libs-y += cmd/
827libs-y += common/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900828libs-$(CONFIG_OF_EMBED) += dts/
Simon Glass5f57b002021-07-10 21:14:22 -0600829libs-y += env/
830libs-y += lib/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900831libs-y += fs/
832libs-y += net/
833libs-y += disk/
834libs-y += drivers/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900835libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
Shengzhou Liub9e745b2016-08-26 18:30:39 +0800836libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
Ley Foon Tan5918afd2019-05-06 09:55:59 +0800837libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
Vignesh Raghavendra7e91f6c2019-10-01 17:26:33 +0530838libs-y += drivers/usb/cdns3/
Kishon Vijay Abraham I5b9ce0e2015-02-23 18:40:16 +0530839libs-y += drivers/usb/dwc3/
Sriram Dash93eb8f32016-04-05 14:41:19 +0530840libs-y += drivers/usb/common/
Simon Glass019808f2015-03-25 12:22:37 -0600841libs-y += drivers/usb/emul/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900842libs-y += drivers/usb/eth/
Pali Rohár4cc53ef2021-02-07 14:50:03 +0100843libs-$(CONFIG_USB_DEVICE) += drivers/usb/gadget/
Jean-Jacques Hiblotdb17a922019-01-10 15:44:14 +0100844libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
845libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
Tom Rinib7ad7212021-06-30 13:09:49 -0400846libs-y += drivers/usb/host/
Chunfeng Yune09b88c2020-10-16 11:38:39 +0800847libs-y += drivers/usb/mtu3/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900848libs-y += drivers/usb/musb/
849libs-y += drivers/usb/musb-new/
Rui Miguel Silva88861a22022-06-29 11:06:15 +0100850libs-y += drivers/usb/isp1760/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900851libs-y += drivers/usb/phy/
852libs-y += drivers/usb/ulpi/
Simon Glass50fbd5c2019-12-28 10:44:51 -0700853ifdef CONFIG_POST
854libs-y += post/
855endif
Simon Glassb5508532022-04-30 00:56:47 -0600856libs-$(CONFIG_$(SPL_TPL_)UNIT_TEST) += test/
Joe Hershberger421f86f2015-05-20 14:27:36 -0500857libs-$(CONFIG_UT_ENV) += test/env/
Heiko Stuebner96383bd2019-10-23 16:46:41 +0200858libs-$(CONFIG_UT_OPTEE) += test/optee/
Maxime Ripardf2a99422016-07-05 10:26:46 +0200859libs-$(CONFIG_UT_OVERLAY) += test/overlay/
Marian Balakowiczf9328632006-09-01 19:49:50 +0200860
Masahiro Yamada33a02da2014-03-03 19:03:17 +0900861libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
Masahiro Yamada08e39a82013-11-11 14:35:55 +0900862
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900863libs-y := $(sort $(libs-y))
864
865u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
866
867u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
868
869libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
870
871u-boot-init := $(head-y)
872u-boot-main := $(libs-y)
873
wdenka8c7c702003-12-06 19:49:23 +0000874
wdenk4f7cb082003-09-11 23:06:34 +0000875# Add GCC lib
Masahiro Yamadacd2e46c2014-03-05 16:59:38 +0900876ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
Masahiro Yamadaa86cf892014-02-27 22:40:34 +0900877PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200878else
Masahiro Yamada6825a952014-02-04 17:24:28 +0900879PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200880endif
881PLATFORM_LIBS += $(PLATFORM_LIBGCC)
Christian Gmeiner52ff8022018-04-09 17:11:45 +0200882
883ifdef CONFIG_CC_COVERAGE
884KBUILD_CFLAGS += --coverage
885PLATFORM_LIBGCC += -lgcov
886endif
887
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200888export PLATFORM_LIBS
Alexey Brodkine75e73d2014-05-16 12:54:17 +0400889export PLATFORM_LIBGCC
wdenk3d3befa2004-03-14 15:06:13 +0000890
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400891# Special flags for CPP when processing the linker script.
892# Pass the version down so we can handle backwards compatibility
893# on the fly.
894LDPPFLAGS += \
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900895 -include $(srctree)/include/u-boot/u-boot.lds.h \
Simon Glass7e6403a2011-11-21 10:49:40 +0000896 -DCPUDIR=$(CPUDIR) \
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400897 $(shell $(LD) --version | \
898 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
899
wdenk7ebf7442002-11-02 23:17:16 +0000900#########################################################################
wdenkbdccc4f2003-08-05 17:43:17 +0000901#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +0000902
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400903ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200904BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400905else
906BOARD_SIZE_CHECK =
907endif
908
Ovidiu Panait2dfdd0c2020-09-25 21:12:56 +0300909ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
Simon Goldschmidt25770152019-05-24 22:07:04 +0200910SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
Heinrich Schuchardt0a0f2312019-04-02 19:19:06 +0200911else
912SPL_SIZE_CHECK =
913endif
914
Ovidiu Panait2dfdd0c2020-09-25 21:12:56 +0300915ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
Simon Glassc52b5e82019-10-20 21:31:52 -0600916TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
917else
918TPL_SIZE_CHECK =
919endif
920
Simon Glassf86ca5a2022-04-30 00:56:52 -0600921ifneq ($(CONFIG_VPL_SIZE_LIMIT),0x0)
922VPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT))
923else
924VPL_SIZE_CHECK =
925endif
926
Scott Wood8137af12013-12-14 11:47:32 +0800927# Statically apply RELA-style relocations (currently arm64 only)
Álvaro Fernández Rojasd57259b2017-04-20 20:36:25 +0200928# This is useful for arm64 where static relocation needs to be performed on
929# the raw binary, but certain simulators only accept an ELF file (but don't
930# do the relocation).
Scott Wood8137af12013-12-14 11:47:32 +0800931ifneq ($(CONFIG_STATIC_RELA),)
Michal Simekb9566372022-06-24 14:14:59 +0200932# $(2) is u-boot ELF, $(3) is u-boot bin, $(4) is text base
Jan Kiszka7125d2c2020-06-25 08:39:45 +0200933quiet_cmd_static_rela = RELOC $@
934cmd_static_rela = \
Michal Simek4c9e2d62022-06-24 14:14:59 +0200935 tools/relocate-rela $(3) $(2)
Scott Wood8137af12013-12-14 11:47:32 +0800936else
Jan Kiszka7125d2c2020-06-25 08:39:45 +0200937quiet_cmd_static_rela =
Pali Roháre9ebc172020-11-04 15:33:44 +0100938cmd_static_rela =
Scott Wood8137af12013-12-14 11:47:32 +0800939endif
940
Simon Glasse6385c72020-07-19 13:56:01 -0600941# Always append INPUTS so that arch config.mk's can add custom ones
942INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
Haiying Wange935a372011-01-27 09:44:59 -0500943
Simon Glasse6385c72020-07-19 13:56:01 -0600944INPUTS-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530945ifeq ($(CONFIG_SPL_FSL_PBL),y)
Simon Glasse6385c72020-07-19 13:56:01 -0600946INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530947else
Tom Rinibba4c7f2020-06-16 19:06:25 -0400948ifneq ($(CONFIG_NXP_ESBC), y)
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530949# For Secure Boot The Image needs to be signed and Header must also
950# be included. So The image has to be built explicitly
Simon Glasse6385c72020-07-19 13:56:01 -0600951INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530952endif
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530953endif
Simon Glasse6385c72020-07-19 13:56:01 -0600954INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
Stefano Babicd714a752019-09-20 08:47:53 +0200955ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
Simon Glasse6385c72020-07-19 13:56:01 -0600956INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
Sven Ebenfeldd21bd692016-11-06 16:37:56 +0100957else
Stefano Babicd714a752019-09-20 08:47:53 +0200958ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
Simon Glasse6385c72020-07-19 13:56:01 -0600959INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
Eran Matityahu0004b7a2018-02-28 09:51:50 +0200960else
Simon Glasse6385c72020-07-19 13:56:01 -0600961INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
Sven Ebenfeldd21bd692016-11-06 16:37:56 +0100962endif
Eran Matityahu0004b7a2018-02-28 09:51:50 +0200963endif
Simon Glasse6385c72020-07-19 13:56:01 -0600964INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
Simon Glassf86ca5a2022-04-30 00:56:52 -0600965INPUTS-$(CONFIG_VPL) += vpl/u-boot-vpl.bin
Simon Glassb7d8e852021-12-16 20:59:38 -0700966
967# Allow omitting the .dtb output if it is not normally used
968INPUTS-$(CONFIG_OF_SEPARATE) += $(if $(CONFIG_OF_OMIT_DTB),dts/dt.dtb,u-boot.dtb)
Masahiro Yamada2405d092014-05-15 20:37:51 +0900969ifeq ($(CONFIG_SPL_FRAMEWORK),y)
Simon Glasse6385c72020-07-19 13:56:01 -0600970INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
Masahiro Yamada2405d092014-05-15 20:37:51 +0900971endif
Ilias Apalodimase7fb7892021-10-26 09:12:33 +0300972INPUTS-$(CONFIG_SANDBOX) += u-boot.dtb
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000973ifneq ($(CONFIG_SPL_TARGET),)
Simon Glasse6385c72020-07-19 13:56:01 -0600974INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000975endif
Simon Glasse6385c72020-07-19 13:56:01 -0600976INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
977INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
978INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
wdenk7ebf7442002-11-02 23:17:16 +0000979
Simon Glasse999bea2020-07-19 13:56:07 -0600980# Generate this input file for binman
981ifeq ($(CONFIG_SPL),)
Simon Glasse6385c72020-07-19 13:56:01 -0600982INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
Simon Glasse999bea2020-07-19 13:56:07 -0600983endif
Ryder Lee3b975a12018-11-15 10:07:49 +0800984
Stefan Roeseb2b8a692014-10-22 12:13:24 +0200985# Add optional build target if defined in board/cpu/soc headers
986ifneq ($(CONFIG_BUILD_TARGET),)
Simon Glasse6385c72020-07-19 13:56:01 -0600987INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
Stefan Roeseb2b8a692014-10-22 12:13:24 +0200988endif
989
AKASHI Takahirodde1b752020-03-10 09:20:43 +0900990ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
Simon Glasse6385c72020-07-19 13:56:01 -0600991INPUTS-y += init_sp_bss_offset_check
Stephen Warren5fed97a2018-01-09 12:52:14 -0700992endif
993
Jagdish Gediya96699f02018-09-03 21:35:10 +0530994ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
Simon Glasse6385c72020-07-19 13:56:01 -0600995INPUTS-y += u-boot-with-dtb.bin
Jagdish Gediya96699f02018-09-03 21:35:10 +0530996endif
997
Simon Glasse999bea2020-07-19 13:56:07 -0600998ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
999# On ARM64 this target is produced by binman so we don't need this dep
1000ifeq ($(CONFIG_ARM64),y)
1001ifeq ($(CONFIG_SPL),y)
1002# TODO: Get binman to generate this too
Simon Glasse6385c72020-07-19 13:56:01 -06001003INPUTS-y += u-boot-rockchip.bin
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001004endif
Simon Glasse999bea2020-07-19 13:56:07 -06001005else
1006ifeq ($(CONFIG_SPL),y)
1007# Generate these inputs for binman which will create the output files
1008INPUTS-y += idbloader.img u-boot.img
1009endif
1010endif
1011endif
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001012
Simon Glass42b18df2020-07-19 13:56:03 -06001013INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
1014 $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
1015 $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
1016
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001017LDFLAGS_u-boot += $(LDFLAGS_FINAL)
Joel Stanleye391b1e2017-04-09 20:33:58 +02001018
1019# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
1020LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
1021
Alistair Delva58772282021-10-20 21:31:33 +00001022# ld.lld support
1023LDFLAGS_u-boot += -z notext
1024
Marek Behúnda48bd92021-05-20 13:24:04 +02001025LDFLAGS_u-boot += --build-id=none
1026
Alexey Brodkin10228072018-02-21 13:06:26 +03001027ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001028LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
1029endif
Masahiro Yamada71f84ef2013-10-17 17:34:53 +09001030
Tom Rini5972ff02020-03-11 18:11:17 -04001031# insure the checker run with the right endianness
1032CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
1033
1034# the checker needs the correct machine size
1035CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
1036
Simon Glasse020c882015-07-31 09:31:23 -06001037# Normally we fill empty space with 0xff
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001038quiet_cmd_objcopy = OBJCOPY $@
Simon Glasse020c882015-07-31 09:31:23 -06001039cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
1040 $(OBJCOPYFLAGS_$(@F)) $< $@
1041
1042# Provide a version which does not do this, for use by EFI
1043quiet_cmd_zobjcopy = OBJCOPY $@
1044cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001045
Simon Glass476476e2015-08-04 12:33:52 -06001046quiet_cmd_efipayload = OBJCOPY $@
1047cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
1048
Sven Ebenfeld1f6a6642016-11-06 16:37:58 +01001049MKIMAGEOUTPUT ?= /dev/null
1050
Marek Vasutb97241b2014-03-14 05:00:14 +01001051quiet_cmd_mkimage = MKIMAGE $@
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001052cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
Rasmus Villemoes06587612018-03-23 12:08:02 +01001053 >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001054
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001055quiet_cmd_mkfitimage = MKIMAGE $@
Simon Glass18e08132020-07-19 13:56:09 -06001056cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
1057 -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
Rasmus Villemoes06587612018-03-23 12:08:02 +01001058 >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001059
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001060quiet_cmd_cat = CAT $@
1061cmd_cat = cat $(filter-out $(PHONY), $^) > $@
1062
Masahiro Yamada982a1192014-02-24 11:12:17 +09001063append = cat $(filter-out $< $(PHONY), $^) >> $@
1064
1065quiet_cmd_pad_cat = CAT $@
Pali Rohár4532bf42020-10-26 14:10:49 +01001066cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
Masahiro Yamada982a1192014-02-24 11:12:17 +09001067
Weijie Gaoa38f84b2020-04-21 09:28:39 +02001068quiet_cmd_lzma = LZMA $@
1069cmd_lzma = lzma -c -z -k -9 $< > $@
1070
Simon Glass1bd87632016-11-13 14:25:50 -07001071cfg: u-boot.cfg
1072
Masahiro Yamada1bdd9422017-01-31 20:11:33 +09001073quiet_cmd_cfgcheck = CFGCHK $2
1074cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
1075 $(srctree)/scripts/config_whitelist.txt $(srctree)
1076
Simon Glass24f073d2021-12-16 20:59:37 -07001077quiet_cmd_ofcheck = OFCHK $2
1078cmd_ofcheck = $(srctree)/scripts/check-of.sh $2 \
1079 $(srctree)/scripts/of_allowlist.txt
1080
Simon Glass13732522021-03-25 21:24:33 +13001081# Concat the value of all the CONFIGs (result is 'y' or 'yy', etc. )
1082got = $(foreach cfg,$(1),$($(cfg)))
1083
1084# expected value 'y for each one
1085expect = $(foreach cfg,$(1),y)
1086
1087# Show a deprecation message
1088# Args:
1089# 1: List of CONFIG_DM_... to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
1090# 2: Name of component (e.g . "Ethernet drivers")
1091# 3: Release deadline (e.g. "v202.07")
1092# 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
1093# Note: Script avoids bash construct, hence the strange double 'if'
1094# (patches welcome!)
1095define deprecated
Simon Glassa0da06d2021-04-01 11:18:13 +13001096 @if [ -n "$(strip $(4))" ]; then if [ "$(got)" != "$(expect)" ]; then \
Simon Glass13732522021-03-25 21:24:33 +13001097 echo >&2 "===================== WARNING ======================"; \
1098 echo >&2 "This board does not use $(firstword $(1)) (Driver Model"; \
1099 echo >&2 "for $(2)). Please update the board to use"; \
1100 echo >&2 "$(firstword $(1)) before the $(3) release. Failure to"; \
1101 echo >&2 "update by the deadline may result in board removal."; \
Johannes Krottmayer1840ce52022-03-01 04:49:50 +01001102 echo >&2 "See doc/develop/driver-model/migration.rst for more info."; \
Simon Glass13732522021-03-25 21:24:33 +13001103 echo >&2 "===================================================="; \
1104 fi; fi
1105
1106endef
1107
Simon Glasse6385c72020-07-19 13:56:01 -06001108PHONY += inputs
1109inputs: $(INPUTS-y)
1110
Simon Glass42b18df2020-07-19 13:56:03 -06001111all: .binman_stamp inputs
1112ifeq ($(CONFIG_BINMAN),y)
1113 $(call if_changed,binman)
1114endif
1115
1116# Timestamp file to make sure that binman always runs
1117.binman_stamp: FORCE
1118 @touch $@
Simon Glasse6385c72020-07-19 13:56:01 -06001119
Jagan Teki63235bd2019-05-29 17:01:30 -04001120ifeq ($(CONFIG_DEPRECATED),y)
1121 $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
1122endif
Simon Glass26e24d62021-11-03 21:09:05 -06001123ifeq ($(CONFIG_OF_EMBED)$(CONFIG_EFI_APP),y)
Simon Glass06467e42021-03-25 21:24:32 +13001124 @echo >&2 "===================== WARNING ======================"
1125 @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
1126 @echo >&2 "be used for debugging purposes. Please use"
1127 @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
Ralph Siemsendb26c502022-04-28 15:52:59 -04001128 @echo >&2 "See doc/develop/devicetree/control.rst for more info."
Simon Glass06467e42021-03-25 21:24:32 +13001129 @echo >&2 "===================================================="
1130endif
1131ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
1132 @echo >&2 "===================== WARNING ======================"
1133 @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
1134 @echo >&2 "to binman instead, to avoid the proliferation of"
1135 @echo >&2 "arch-specific scripts with no tests."
1136 @echo >&2 "===================================================="
1137endif
Heinrich Schuchardt282ed242019-09-16 18:41:42 +02001138ifneq ($(CONFIG_DM),y)
1139 @echo >&2 "===================== WARNING ======================"
1140 @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
1141 @echo >&2 "compulsory starting with the v2020.01 release."
1142 @echo >&2 "Failure to update may result in board removal."
Johannes Krottmayer1840ce52022-03-01 04:49:50 +01001143 @echo >&2 "See doc/develop/driver-model/migration.rst for more info."
Heinrich Schuchardt282ed242019-09-16 18:41:42 +02001144 @echo >&2 "===================================================="
1145endif
Simon Glass78b4a562021-03-25 21:24:41 +13001146 $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
1147 $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
Simon Glass8cd18742021-03-25 21:24:42 +13001148 $(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET))
Simon Glass19c969b2021-07-10 21:14:33 -06001149 $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
Simon Glass6ce22372021-11-24 09:26:45 -07001150 $(call deprecated,CONFIG_DM_KEYBOARD,Keyboard drivers,v2022.10,$(CONFIG_KEYBOARD))
Simon Glass6e4a7ea2021-12-18 11:27:29 -07001151 @# CONFIG_SYS_TIMER_RATE has brackets in it for some boards which
1152 @# confuses this rule. Use if() to send just a single character which
1153 @# is enable to tell 'deprecated' that one of these symbols exists
1154 $(call deprecated,CONFIG_TIMER,Timer drivers,v2023.01,$(if $(strip $(CONFIG_SYS_TIMER_RATE)$(CONFIG_SYS_TIMER_COUNTER)),x))
Simon Glass90533742022-01-22 05:03:50 -07001155 $(call deprecated,CONFIG_DM_SERIAL,Serial drivers,v2023.04,$(CONFIG_SERIAL))
Simon Glassbc39e412022-01-31 07:49:38 -07001156 $(call deprecated,CONFIG_DM_SCSI,SCSI drivers,v2023.04,$(CONFIG_SCSI))
Masahiro Yamada4bf06d12016-09-26 13:04:59 +09001157 @# Check that this build does not use CONFIG options that we do not
1158 @# know about unless they are in Kconfig. All the existing CONFIG
1159 @# options are whitelisted, so new ones should not be added.
Masahiro Yamada1bdd9422017-01-31 20:11:33 +09001160 $(call cmd,cfgcheck,u-boot.cfg)
Simon Glass24f073d2021-12-16 20:59:37 -07001161 @# Check that this build does not override OF_HAS_PRIOR_STAGE by
1162 @# disabling OF_BOARD.
1163 $(call cmd,ofcheck,$(KCONFIG_CONFIG))
wdenk7ebf7442002-11-02 23:17:16 +00001164
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +09001165PHONY += dtbs
Masahiro Yamada4141e852016-06-23 13:53:46 +09001166dtbs: dts/dt.dtb
1167 @:
Tom Rini36dd5f12017-09-23 13:00:57 -04001168dts/dt.dtb: u-boot
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +09001169 $(Q)$(MAKE) $(build)=dts dtbs
Simon Glass2c0f79e2011-10-24 19:15:31 +00001170
Simon Glassad1ecd22016-01-31 18:10:50 -07001171quiet_cmd_copy = COPY $@
1172 cmd_copy = cp $< $@
1173
Jean-Jacques Hiblot11955592017-09-15 12:57:24 +02001174ifeq ($(CONFIG_MULTI_DTB_FIT),y)
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001175
Marek Vasut95f4bbd2019-03-08 16:06:55 +01001176ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
1177FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
1178else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
1179FINAL_DTB_CONTAINER = fit-dtb.blob.gz
1180else
1181FINAL_DTB_CONTAINER = fit-dtb.blob
1182endif
1183
1184fit-dtb.blob.gz: fit-dtb.blob
1185 @gzip -kf9 $< > $@
1186
1187fit-dtb.blob.lzo: fit-dtb.blob
1188 @lzop -f9 $< > $@
1189
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001190fit-dtb.blob: dts/dt.dtb FORCE
1191 $(call if_changed,mkimage)
Vagrant Cascadian878e2a52019-05-02 11:14:12 -07001192ifneq ($(SOURCE_DATE_EPOCH),)
1193 touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
1194 chmod 0600 fit-dtb.blob
1195endif
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001196
1197MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1198 -a 0 -e 0 -E \
1199 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
1200
Michal Simek570c4632021-08-19 11:09:37 +02001201MKIMAGEFLAGS_fit-dtb.blob += -B 0x8
1202
Michal Simekc8c5e2b2019-03-23 11:13:00 +05301203ifneq ($(EXT_DTB),)
1204u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
1205 $(call if_changed,cat)
1206else
Tom Rini748198c2019-05-19 18:09:05 -04001207u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001208 $(call if_changed,cat)
Michal Simekc8c5e2b2019-03-23 11:13:00 +05301209endif
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001210
1211u-boot.bin: u-boot-fit-dtb.bin FORCE
1212 $(call if_changed,copy)
Heiko Schocher16c776d2019-05-28 13:44:31 +02001213
1214u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
1215 $(call if_changed,cat)
1216
Simon Glassb7d8e852021-12-16 20:59:38 -07001217else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.)
Simon Glassad1ecd22016-01-31 18:10:50 -07001218u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001219 $(call if_changed,cat)
Simon Glass2c0f79e2011-10-24 19:15:31 +00001220
Simon Glassad1ecd22016-01-31 18:10:50 -07001221u-boot.bin: u-boot-dtb.bin FORCE
1222 $(call if_changed,copy)
1223else
1224u-boot.bin: u-boot-nodtb.bin FORCE
1225 $(call if_changed,copy)
1226endif
1227
Heiko Schocher0f282c12019-10-25 14:46:54 +02001228# we call Makefile in arch/arm/mach-imx which
1229# has targets which are dependent on targets defined
1230# here. make could not resolve them and we must ensure
1231# that they are finished before calling imx targets
1232ifeq ($(CONFIG_MULTI_DTB_FIT),y)
1233IMX_DEPS = u-boot-fit-dtb.bin
1234endif
1235
1236%.imx: $(IMX_DEPS) %.bin
Stefano Babic552a8482017-06-29 10:16:06 +02001237 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Heinrich Schuchardt219dee72019-04-02 19:19:05 +02001238 $(BOARD_SIZE_CHECK)
Stefano Babice64348f2014-03-31 09:50:35 +02001239
Albert ARIBAUD \(3ADEV\)ed0c2c02016-09-26 09:08:06 +02001240%.vyb: %.imx
1241 $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
1242
1243quiet_cmd_copy = COPY $@
1244 cmd_copy = cp $< $@
1245
Masahiro Yamada0d1e8aa2014-02-21 15:34:30 +09001246u-boot.dtb: dts/dt.dtb
1247 $(call cmd,copy)
1248
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001249OBJCOPYFLAGS_u-boot.hex := -O ihex
wdenk6310eb92005-01-09 21:28:15 +00001250
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001251OBJCOPYFLAGS_u-boot.srec := -O srec
wdenk7ebf7442002-11-02 23:17:16 +00001252
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001253u-boot.hex u-boot.srec: u-boot FORCE
1254 $(call if_changed,objcopy)
1255
Masaru Nagai341ca902015-08-28 12:12:45 +09001256OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
1257
1258u-boot-elf.srec: u-boot.elf FORCE
1259 $(call if_changed,objcopy)
1260
Marek Vasut3ee58ea2018-02-26 20:14:02 +01001261OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
1262
1263spl/u-boot-spl.srec: spl/u-boot-spl FORCE
1264 $(call if_changed,objcopy)
1265
Marek Vasut56023302018-10-03 12:44:13 +02001266%.scif: %.srec
1267 $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
1268
Simon Glassad1ecd22016-01-31 18:10:50 -07001269OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
Jagdish Gediya96699f02018-09-03 21:35:10 +05301270 $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
Pali Rohár827a2322022-05-02 18:36:39 +02001271 $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),$(if $(CONFIG_OF_EMBED),,-R .bootpg -R .resetvec))
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001272
Simon Glassad1ecd22016-01-31 18:10:50 -07001273binary_size_check: u-boot-nodtb.bin FORCE
1274 @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001275 map_size=$(shell cat u-boot.map | \
Simon Glass0b308f12014-06-18 00:10:15 -06001276 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001277 | sed 's/0X//g' \
Simon Glass0b308f12014-06-18 00:10:15 -06001278 | bc); \
Simon Glass89742922014-06-02 22:04:47 -06001279 if [ "" != "$$map_size" ]; then \
1280 if test $$map_size -ne $$file_size; then \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001281 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
Simon Glassad1ecd22016-01-31 18:10:50 -07001282 echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
Simon Glass89742922014-06-02 22:04:47 -06001283 exit 1; \
Angelo Dureghello51301022021-11-05 16:20:24 +01001284 fi; \
Simon Glass89742922014-06-02 22:04:47 -06001285 fi
1286
AKASHI Takahirodde1b752020-03-10 09:20:43 +09001287ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
Stephen Warren5fed97a2018-01-09 12:52:14 -07001288ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
1289subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
1290else
1291subtract_sys_malloc_f_len = true
1292endif
1293# The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
1294# so low that the DTB could probably use 90%+ of the available space, for
1295# current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
1296# safe for now and tweak this later if space becomes tight.
1297# A rejected alternative would be to check that some absolute minimum stack
1298# space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
1299# deliberately build-specific, to take account of build-to-build stack usage
1300# differences due to different feature sets, there is no common absolute value
1301# to check against.
1302init_sp_bss_offset_check: u-boot.dtb FORCE
1303 @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
1304 space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
1305 $(subtract_sys_malloc_f_len) ; \
1306 quarter_space=$$(($${space} / 4)) ; \
1307 if [ $${dtb_size} -gt $${quarter_space} ]; then \
1308 echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
1309 echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
1310 exit 1 ; \
1311 fi
1312endif
1313
Pali Rohár71d3fa72020-11-04 10:34:35 +01001314shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
Pali Rohárae897022020-10-07 15:39:40 +02001315
1316quiet_cmd_objcopy_uboot = OBJCOPY $@
Pali Roháre9ebc172020-11-04 15:33:44 +01001317ifdef cmd_static_rela
Pali Rohár4532bf42020-10-26 14:10:49 +01001318cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || { rm -f $@; false; }
Pali Roháre9ebc172020-11-04 15:33:44 +01001319else
1320cmd_objcopy_uboot = $(cmd_objcopy)
1321endif
Pali Rohárae897022020-10-07 15:39:40 +02001322
Simon Glassad1ecd22016-01-31 18:10:50 -07001323u-boot-nodtb.bin: u-boot FORCE
Pali Rohárae897022020-10-07 15:39:40 +02001324 $(call if_changed,objcopy_uboot)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001325 $(BOARD_SIZE_CHECK)
wdenk7ebf7442002-11-02 23:17:16 +00001326
Masahiro Yamada9e414032014-02-04 17:24:24 +09001327u-boot.ldr: u-boot
Mike Frysinger76d82182009-07-21 22:17:36 -04001328 $(CREATE_LDR_ENV)
Sonic Zhang240182d2014-08-12 18:45:26 +08001329 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
Mike Frysingerf3a14d32010-10-13 22:58:23 -04001330 $(BOARD_SIZE_CHECK)
Mike Frysinger94a91e22008-02-04 19:26:57 -05001331
Simon Glass17a944b2016-11-25 20:15:57 -07001332# binman
1333# ---------------------------------------------------------------------------
Simon Glassa3c00552018-11-06 15:21:31 -07001334# Use 'make BINMAN_DEBUG=1' to enable debugging
Simon Glassef108042021-02-06 09:57:28 -07001335# Use 'make BINMAN_VERBOSE=3' to set vebosity level
Simon Glassc0f1ebe2020-09-06 10:39:08 -06001336default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
Simon Glasscfee2b22021-03-18 20:25:08 +13001337
Simon Glass17a944b2016-11-25 20:15:57 -07001338quiet_cmd_binman = BINMAN $@
Stephen Warren4f4fb852019-07-19 11:21:17 -06001339cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
Simon Glass79450772021-11-23 21:09:48 -07001340 $(foreach f,$(BINMAN_TOOLPATHS),--toolpath $(f)) \
Simon Glass8fce3f22019-09-25 08:11:10 -06001341 --toolpath $(objtree)/tools \
Simon Glass1f338e02019-09-25 08:11:11 -06001342 $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
Simon Glassbd4d0dc2020-09-01 05:14:00 -06001343 build -u -d u-boot.dtb -O . -m --allow-missing \
Simon Glass8bbd8a32022-01-09 20:13:36 -07001344 --fake-ext-blobs \
Simon Glassa3c00552018-11-06 15:21:31 -07001345 -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
Simon Glasscfa3db62020-09-01 05:14:01 -06001346 -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
Simon Glass79450772021-11-23 21:09:48 -07001347 $(foreach f,$(BINMAN_INDIRS),-I $(f)) \
Simon Glasscfa3db62020-09-01 05:14:01 -06001348 -a atf-bl31-path=${BL31} \
Roger Quadros47f420a2022-02-19 20:50:04 +02001349 -a tee-os-path=${TEE} \
Bin Meng73c2a8f2021-05-10 20:23:34 +08001350 -a opensbi-path=${OPENSBI} \
Simon Glassc0f1ebe2020-09-06 10:39:08 -06001351 -a default-dt=$(default_dt) \
Samuel Holland18bd4552020-10-21 21:12:15 -05001352 -a scp-path=$(SCP) \
Simon Glasscfee2b22021-03-18 20:25:08 +13001353 -a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
1354 -a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
Simon Glassf99cbe42021-08-07 07:24:07 -06001355 -a spl-dtb=$(CONFIG_SPL_OF_REAL) \
Simon Glassebee2062021-10-31 19:17:03 -06001356 -a tpl-dtb=$(CONFIG_TPL_OF_REAL) \
Philippe Reynesd12c1be2022-03-28 22:57:03 +02001357 -a pre-load-key-path=${PRE_LOAD_KEY_PATH} \
Stephen Warren4f4fb852019-07-19 11:21:17 -06001358 $(BINMAN_$(@F))
Simon Glass17a944b2016-11-25 20:15:57 -07001359
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001360OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
Mike Frysinger94a91e22008-02-04 19:26:57 -05001361
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001362OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
1363
1364u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
1365 $(call if_changed,objcopy)
Mike Frysinger94a91e22008-02-04 19:26:57 -05001366
Stefan Roeseb40bda62012-08-16 17:54:52 +02001367#
1368# U-Boot entry point, needed for booting of full-blown U-Boot
1369# from the SPL U-Boot version.
1370#
1371ifndef CONFIG_SYS_UBOOT_START
Patrice Chotard38a6cce2019-12-06 15:01:48 +01001372CONFIG_SYS_UBOOT_START := $(CONFIG_SYS_TEXT_BASE)
Stefan Roeseb40bda62012-08-16 17:54:52 +02001373endif
1374
Michal Simekfc8db752019-10-02 15:53:12 +02001375# Boards with more complex image requirements can provide an .its source file
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001376# or a generator script
Simon Glassf4a43d22020-07-19 13:56:11 -06001377# NOTE: Please do not use this. We are migrating away from Makefile rules to use
1378# binman instead.
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001379ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
Patrick Delaunay0015e6d2020-04-23 09:39:08 +02001380U_BOOT_ITS := u-boot.its
1381$(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
1382 $(call if_changed,copy)
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001383else
Simon Glassa8f3ace2020-07-19 13:56:10 -06001384ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001385U_BOOT_ITS := u-boot.its
Andreas Färberc29c1e62018-06-03 07:23:58 +02001386ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
1387U_BOOT_ITS_DEPS += u-boot
1388endif
1389$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001390 $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
1391 $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
1392endif
1393endif
1394
Simon Glasscdf17242016-02-22 22:55:57 -07001395ifdef CONFIG_SPL_LOAD_FIT
1396MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1397 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
Sjoerd Simons80cc9512019-06-18 22:13:20 +02001398 -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
Simon Glasscdf17242016-02-22 22:55:57 -07001399 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
Klaus Heinrich Kiwi4e040b42021-02-09 15:41:55 -03001400 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
Jean-Jacques Hiblot557bc972019-10-22 16:39:21 +02001401 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
1402 $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
Simon Glasscdf17242016-02-22 22:55:57 -07001403else
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001404MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
1405 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1406 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
Sven Ebenfeldd21bd692016-11-06 16:37:56 +01001407MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
1408 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1409 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
Sven Ebenfeld1f6a6642016-11-06 16:37:58 +01001410u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
Simon Glasscdf17242016-02-22 22:55:57 -07001411endif
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001412
Simon Glassdae6e7b2016-01-31 18:10:54 -07001413MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
1414
Bin Meng6cdd1772019-10-28 07:25:01 -07001415# Some boards have the kwbimage.cfg file written in advance, while some
1416# other boards generate it on the fly during the build in the build tree.
1417# Let's check if the file exists in the build tree first, otherwise we
1418# fall back to use the one in the source tree.
1419KWD_CONFIG_FILE = $(shell \
1420 if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
1421 echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
1422 else \
1423 echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
1424 fi)
1425
1426MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
Masahiro Yamada4ab3fc52014-03-11 11:05:17 +09001427 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001428
Bin Meng6cdd1772019-10-28 07:25:01 -07001429MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
Pali Rohár628fced2021-07-23 11:14:30 +02001430 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
Mario Sixa1b6b0a2017-01-11 16:01:00 +01001431 $(if $(KEYDIR),-k $(KEYDIR))
Stefan Roesea90ffb52015-01-19 11:33:45 +01001432
Masahiro Yamadae4536f82014-03-11 11:05:16 +09001433MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
Hou Zhiqiang20589672022-02-17 11:51:36 +08001434 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -A $(ARCH) -T pblimage
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001435
Hou Zhiqiangbcda5b02019-08-20 09:35:23 +00001436ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1437UBOOT_BIN := u-boot-with-dtb.bin
1438else
1439UBOOT_BIN := u-boot.bin
1440endif
1441
Weijie Gaoa38f84b2020-04-21 09:28:39 +02001442MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
1443 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1444 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
1445
1446u-boot.bin.lzma: u-boot.bin FORCE
1447 $(call if_changed,lzma)
1448
1449u-boot-lzma.img: u-boot.bin.lzma FORCE
1450 $(call if_changed,mkimage)
1451
Sven Ebenfeldd21bd692016-11-06 16:37:56 +01001452u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
Lukas Auer2c768612019-08-21 21:14:41 +02001453 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
Simon Glass8e076812021-12-16 20:59:22 -07001454 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
Tom Rinie4b8dd92019-08-27 07:11:37 -04001455 ,$(UBOOT_BIN)) FORCE
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001456 $(call if_changed,mkimage)
Simon Goldschmidt45297e22019-01-11 20:56:02 +01001457 $(BOARD_SIZE_CHECK)
wdenkbdccc4f2003-08-05 17:43:17 +00001458
Marek Vasut7a778362019-03-06 22:04:00 +01001459ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
1460MKIMAGEFLAGS_u-boot.itb =
1461else
1462MKIMAGEFLAGS_u-boot.itb = -E
1463endif
Michal Simek570c4632021-08-19 11:09:37 +02001464MKIMAGEFLAGS_u-boot.itb += -B 0x8
Marek Vasut7a778362019-03-06 22:04:00 +01001465
Samuel Holland509978e2020-10-21 21:12:08 -05001466ifdef U_BOOT_ITS
Lukas Auer2c768612019-08-21 21:14:41 +02001467u-boot.itb: u-boot-nodtb.bin \
Ilias Apalodimase7fb7892021-10-26 09:12:33 +03001468 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
Lukas Auer2c768612019-08-21 21:14:41 +02001469 $(U_BOOT_ITS) FORCE
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001470 $(call if_changed,mkfitimage)
Maxime Riparde89f5591f2018-01-16 09:44:23 +01001471 $(BOARD_SIZE_CHECK)
Samuel Holland509978e2020-10-21 21:12:08 -05001472endif
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001473
Pali Rohár628fced2021-07-23 11:14:30 +02001474u-boot-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
Stefan Roesea90ffb52015-01-19 11:33:45 +01001475 $(call if_changed,mkimage)
1476
Masahiro Yamada9e414032014-02-04 17:24:24 +09001477u-boot.sha1: u-boot.bin
1478 tools/ubsha1 u-boot.bin
Heiko Schocher566a4942007-06-22 19:11:54 +02001479
Masahiro Yamada9e414032014-02-04 17:24:24 +09001480u-boot.dis: u-boot
wdenk7ebf7442002-11-02 23:17:16 +00001481 $(OBJDUMP) -d $< > $@
1482
York Sun7550dbe2018-06-14 14:38:48 -07001483ifneq ($(CONFIG_SPL_PAYLOAD),)
1484SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
Ying Zhang3aa29de2013-08-16 15:16:15 +08001485else
Masahiro Yamada9e414032014-02-04 17:24:24 +09001486SPL_PAYLOAD := u-boot.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +08001487endif
Scott Wood74752ba2012-12-06 13:33:16 +00001488
Stefan Roese9ea6f712019-04-03 15:24:50 +02001489SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
1490
Masahiro Yamada982a1192014-02-24 11:12:17 +09001491OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
1492 --pad-to=$(CONFIG_SPL_PAD_TO)
Stefan Roese9ea6f712019-04-03 15:24:50 +02001493u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
Masahiro Yamada982a1192014-02-24 11:12:17 +09001494 $(call if_changed,pad_cat)
Ying Zhang3aa29de2013-08-16 15:16:15 +08001495
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001496ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
Jagan Tekib1022d52020-01-10 00:16:16 +05301497
Jagan Teki66ffe312020-01-10 00:16:18 +05301498# TPL + SPL
1499ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
Jagan Tekif6f9aff2020-06-04 20:21:38 +05301500MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
Jagan Teki3029a7b2020-01-10 00:16:17 +05301501tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001502 $(call if_changed,mkimage)
Jagan Teki3029a7b2020-01-10 00:16:17 +05301503idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001504 $(call if_changed,cat)
Jagan Teki66ffe312020-01-10 00:16:18 +05301505else
Jagan Tekif6f9aff2020-06-04 20:21:38 +05301506MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
Jagan Teki66ffe312020-01-10 00:16:18 +05301507idbloader.img: spl/u-boot-spl.bin FORCE
1508 $(call if_changed,mkimage)
1509endif
1510
Simon Glasse999bea2020-07-19 13:56:07 -06001511ifeq ($(CONFIG_ARM64),y)
Jagan Teki79030a42020-01-10 00:16:21 +05301512OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
1513 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
1514u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
1515 $(call if_changed,pad_cat)
1516endif # CONFIG_ARM64
1517
1518endif # CONFIG_ARCH_ROCKCHIP
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001519
Vladimir Zapolskiye3e08192018-09-17 21:43:04 +03001520ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001521MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
1522
1523lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
1524 $(call if_changed,mkimage)
1525
1526OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1527
Masahiro Yamada514ec432016-02-05 17:55:13 +09001528lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001529 $(call if_changed,objcopy)
1530
1531OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1532
Masahiro Yamada514ec432016-02-05 17:55:13 +09001533lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001534 $(call if_changed,objcopy)
1535
Masahiro Yamada514ec432016-02-05 17:55:13 +09001536lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001537 $(call if_changed,cat)
1538
Vladimir Zapolskiye3e08192018-09-17 21:43:04 +03001539endif
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001540
Masahiro Yamada982a1192014-02-24 11:12:17 +09001541OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
1542 --pad-to=$(CONFIG_TPL_PAD_TO)
1543tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
1544 $(call if_changed,pad_cat)
Heiko Schocher7816f2c2011-07-16 00:06:42 +00001545
Masahiro Yamada630d2342014-02-24 11:12:21 +09001546SPL: spl/u-boot-spl.bin FORCE
Stefano Babic552a8482017-06-29 10:16:06 +02001547 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Masahiro Yamada630d2342014-02-24 11:12:21 +09001548
Peng Fancaceb732018-12-21 06:21:31 +00001549ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
Peng Fan700315c2019-08-22 07:42:41 +00001550ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
1551u-boot.cnt: u-boot.bin FORCE
1552 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1553
1554flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
1555 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1556else
Marek Vasutbd9059c2021-02-25 21:50:59 +01001557ifeq ($(CONFIG_BINMAN),y)
1558flash.bin: spl/u-boot-spl.bin $(INPUTS-y) FORCE
1559 $(call if_changed,binman)
Marek Vasutbd9059c2021-02-25 21:50:59 +01001560else
Peng Fan94df9882018-11-20 10:19:46 +00001561flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
1562 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1563endif
Peng Fan700315c2019-08-22 07:42:41 +00001564endif
Marek Vasutbd9059c2021-02-25 21:50:59 +01001565endif
Peng Fan94df9882018-11-20 10:19:46 +00001566
Marek Vasut70344782021-03-01 16:41:28 +01001567u-boot.uim: u-boot.bin FORCE
1568 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1569
1570u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
Stefano Babic552a8482017-06-29 10:16:06 +02001571 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Benoît Thébaudeau7d5a5c72013-04-11 09:35:57 +00001572
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001573MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
1574
1575u-boot.ubl: u-boot-with-spl.bin FORCE
1576 $(call if_changed,mkimage)
José Miguel Gonçalves277f00f2012-09-19 01:25:26 +00001577
Masahiro Yamada982a1192014-02-24 11:12:17 +09001578MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
1579 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
1580 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
1581spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
1582 $(call if_changed,mkimage)
Christian Rieschd36d8852011-12-09 09:47:39 +00001583
Christian Riesch532d5312014-05-07 10:16:28 +02001584OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
Masahiro Yamada982a1192014-02-24 11:12:17 +09001585u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
1586 $(call if_changed,pad_cat)
Otavio Salvadora5453552012-08-18 07:25:25 +00001587
Marek Vasut1a9df132014-04-03 19:12:21 +02001588u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
1589 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +09001590u-boot.sb: u-boot.bin spl/u-boot-spl.bin
Masahiro Yamada07e27ce2014-03-11 11:05:11 +09001591 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
Marek Vasut30b9b932011-11-08 23:18:19 +00001592
Masahiro Yamada982a1192014-02-24 11:12:17 +09001593MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
1594 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1595spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1596 $(call if_changed,mkimage)
1597
Marek Vasut333b7202015-07-15 02:53:45 +02001598ifneq ($(CONFIG_ARCH_SOCFPGA),)
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001599quiet_cmd_gensplx4 = GENSPLX4 $@
Ley Foon Tan40551cf2021-01-13 18:53:05 +08001600cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \
1601 --pad-to=$(CONFIG_SPL_PAD_TO) \
1602 spl/u-boot-spl.sfp spl/u-boot-spl.sfp && \
1603 cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
Pali Rohár4532bf42020-10-26 14:10:49 +01001604 spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm -f $@; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001605spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE
1606 $(call if_changed,gensplx4)
1607
Marek Vasut333b7202015-07-15 02:53:45 +02001608quiet_cmd_socboot = SOCBOOT $@
Pali Rohár4532bf42020-10-26 14:10:49 +01001609cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001610u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE
Marek Vasut333b7202015-07-15 02:53:45 +02001611 $(call if_changed,socboot)
Marek Vasut533832c2019-11-20 22:36:45 +01001612
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001613quiet_cmd_gensplpadx4 = GENSPLPADX4 $@
1614cmd_gensplpadx4 = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
Marek Vasut533832c2019-11-20 22:36:45 +01001615 cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
1616 spl/u-boot-spl.sfp spl/u-boot-spl.pad \
1617 spl/u-boot-spl.sfp spl/u-boot-spl.pad \
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001618 spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \
Pali Rohár4532bf42020-10-26 14:10:49 +01001619 { rm -f $@ spl/u-boot-spl.pad; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001620u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE
1621 $(call if_changed,gensplpadx4)
1622
1623quiet_cmd_socnandboot = SOCNANDBOOT $@
Pali Rohár4532bf42020-10-26 14:10:49 +01001624cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001625u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
Marek Vasut533832c2019-11-20 22:36:45 +01001626 $(call if_changed,socnandboot)
1627
Marek Vasut333b7202015-07-15 02:53:45 +02001628endif
1629
Jagdish Gediya96699f02018-09-03 21:35:10 +05301630ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1631u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
1632 $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
1633 $(call if_changed,binman)
1634
1635ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
1636OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
1637u-boot-br.bin: u-boot FORCE
1638 $(call if_changed,objcopy)
1639endif
1640endif
1641
Simon Glass0adf8d32016-03-11 22:07:16 -07001642quiet_cmd_ldr = LD $@
1643cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
1644 $(filter-out FORCE,$^) -o $@
1645
Simon Glassbcd4e6f2020-07-19 13:55:52 -06001646ifdef CONFIG_X86
Simon Glass5e239182019-08-24 07:22:49 -06001647OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
1648u-boot-x86-start16.bin: u-boot FORCE
1649 $(call if_changed,objcopy)
1650
1651OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
1652u-boot-x86-reset16.bin: u-boot FORCE
Simon Glassfce7b272014-11-12 22:42:08 -07001653 $(call if_changed,objcopy)
Simon Glassaafe5c52020-07-19 13:55:54 -06001654
Simon Glass42b18df2020-07-19 13:56:03 -06001655endif # CONFIG_X86
Simon Glassbcd4e6f2020-07-19 13:55:52 -06001656
Simon Glass08aeb8b2015-08-04 12:33:43 -06001657OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1658u-boot-app.efi: u-boot FORCE
1659 $(call if_changed,zobjcopy)
1660
Simon Glass73c5c392016-01-31 18:10:55 -07001661u-boot.bin.o: u-boot.bin FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001662 $(call if_changed,efipayload)
1663
1664u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1665 $(call if_changed_dep,cpp_lds)
1666
1667# Rule to link the EFI payload which contains a stub and a U-Boot binary
1668quiet_cmd_u-boot_payload ?= LD $@
1669 cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
Simon Glass96a8d402015-08-04 12:33:56 -06001670 -T u-boot-payload.lds arch/x86/cpu/call32.o \
Simon Glass73c5c392016-01-31 18:10:55 -07001671 lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
Simon Glass2dcd4e92016-11-07 08:47:14 -07001672 $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
Simon Glass476476e2015-08-04 12:33:52 -06001673
Simon Glass73c5c392016-01-31 18:10:55 -07001674u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001675 $(call if_changed,u-boot_payload)
1676
1677OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1678u-boot-payload.efi: u-boot-payload FORCE
1679 $(call if_changed,zobjcopy)
1680
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001681u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1682 $(call if_changed,cat)
Stefan Roesefb3d2b82012-08-24 17:36:53 +02001683
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301684#Add a target to create boot binary having SPL binary in PBI format
1685#concatenated with u-boot binary. It is need by PowerPC SoC having
1686#internal SRAM <= 512KB.
1687MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
Alison Wang94cb17d2014-12-03 15:00:41 +08001688 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1689 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301690
1691spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1692 $(call if_changed,mkimage)
1693
Alison Wang45c2e482014-12-03 15:00:42 +08001694ifeq ($(ARCH),arm)
1695UBOOT_BINLOAD := u-boot.img
1696else
Jagdish Gediya96699f02018-09-03 21:35:10 +05301697ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1698UBOOT_BINLOAD := u-boot-with-dtb.bin
1699else
Alison Wang45c2e482014-12-03 15:00:42 +08001700UBOOT_BINLOAD := u-boot.bin
1701endif
Jagdish Gediya96699f02018-09-03 21:35:10 +05301702endif
Alison Wang45c2e482014-12-03 15:00:42 +08001703
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301704OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1705 --gap-fill=0xff
1706
Alison Wang45c2e482014-12-03 15:00:42 +08001707u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301708 $(call if_changed,pad_cat)
1709
Stefan Roeseecddccd2013-02-22 11:36:50 +01001710# PPC4xx needs the SPL at the end of the image, since the reset vector
1711# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1712# and need to introduce a new build target with the full blown U-Boot
1713# at the start padded up to the start of the SPL image. And then concat
1714# the SPL image to the end.
Masahiro Yamada982a1192014-02-24 11:12:17 +09001715
1716OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1717 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1718u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1719 $(call if_changed,pad_cat)
Stefan Roeseecddccd2013-02-22 11:36:50 +01001720
Álvaro Fernández Rojase69945e2017-04-20 20:36:28 +02001721quiet_cmd_u-boot-elf ?= LD $@
1722 cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
Du Huanpeng21d3e3d2022-03-31 02:41:42 +08001723 $(if $(CONFIG_SYS_BIG_ENDIAN),-EB,-EL) \
Michal Simeke14ba8a2020-03-30 13:58:59 +02001724 -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
Álvaro Fernández Rojase69945e2017-04-20 20:36:28 +02001725 -Ttext=$(CONFIG_SYS_TEXT_BASE)
Michal Simeke14ba8a2020-03-30 13:58:59 +02001726u-boot.elf: u-boot.bin u-boot-elf.lds
Álvaro Fernández Rojase69945e2017-04-20 20:36:28 +02001727 $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
1728 $(call if_changed,u-boot-elf)
Scott Woodf4dc7142013-12-14 11:47:33 +08001729
Michal Simeke14ba8a2020-03-30 13:58:59 +02001730u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
1731 $(call if_changed_dep,cpp_lds)
1732
Ryder Lee3b975a12018-11-15 10:07:49 +08001733# MediaTek's ARM-based u-boot needs a header to contains its load address
1734# which is parsed by the BootROM.
1735# If the SPL build is enabled, the header will be added to the spl binary,
1736# and the spl binary and the u-boot.img will be combined into one file.
1737# Otherwise the header will be added to the u-boot.bin directly.
1738
1739ifeq ($(CONFIG_SPL),y)
1740spl/u-boot-spl-mtk.bin: spl/u-boot-spl
Weijie Gaof4f478b2021-03-05 10:39:55 +08001741
1742u-boot-mtk.bin: u-boot-with-spl.bin
1743 $(call if_changed,copy)
Ryder Lee3b975a12018-11-15 10:07:49 +08001744else
1745MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
1746 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
1747 -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
1748
1749u-boot-mtk.bin: u-boot.bin FORCE
1750 $(call if_changed,mkimage)
1751endif
1752
Daniel Schwierzeckb8cecd02020-06-06 22:21:47 +02001753quiet_cmd_endian_swap = SWAP $@
1754 cmd_endian_swap = $(srctree)/tools/endian-swap.py $< $@
1755
1756u-boot-swap.bin: u-boot.bin FORCE
1757 $(call if_changed,endian_swap)
1758
Paul Burton09bebb82017-06-15 17:05:09 -07001759ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
1760
Marek Behúnc1094982021-05-20 13:24:03 +02001761# Generate linker list symbols references to force compiler to not optimize
1762# them away when compiling with LTO
1763ifdef CONFIG_LTO
1764u-boot-keep-syms-lto := keep-syms-lto.o
1765u-boot-keep-syms-lto_c := $(patsubst %.o,%.c,$(u-boot-keep-syms-lto))
1766
1767quiet_cmd_keep_syms_lto = KSL $@
1768 cmd_keep_syms_lto = \
Patrick Delaunayff7852d2021-07-21 09:56:07 +02001769 $(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
Marek Behúnc1094982021-05-20 13:24:03 +02001770
1771quiet_cmd_keep_syms_lto_cc = KSLCC $@
1772 cmd_keep_syms_lto_cc = \
1773 $(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
1774
1775$(u-boot-keep-syms-lto_c): $(u-boot-main)
1776 $(call if_changed,keep_syms_lto)
1777$(u-boot-keep-syms-lto): $(u-boot-keep-syms-lto_c)
1778 $(call if_changed,keep_syms_lto_cc)
1779else
1780u-boot-keep-syms-lto :=
1781endif
1782
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001783# Rule to link u-boot
1784# May be overridden by arch/$(ARCH)/config.mk
Marek Behúnc1094982021-05-20 13:24:03 +02001785ifdef CONFIG_LTO
1786quiet_cmd_u-boot__ ?= LTO $@
Wolfgang Denk0cf207e2021-09-27 17:42:39 +02001787 cmd_u-boot__ ?= \
Marek Behúnc1094982021-05-20 13:24:03 +02001788 $(CC) -nostdlib -nostartfiles \
1789 $(LTO_FINAL_LDFLAGS) $(c_flags) \
1790 $(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_u-boot:%=-Wl,%) -o $@ \
1791 -T u-boot.lds $(u-boot-init) \
1792 -Wl,--whole-archive \
1793 $(u-boot-main) \
1794 $(u-boot-keep-syms-lto) \
1795 $(PLATFORM_LIBS) \
1796 -Wl,--no-whole-archive \
1797 -Wl,-Map,u-boot.map; \
1798 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
1799else
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001800quiet_cmd_u-boot__ ?= LD $@
Marek Behún14458362021-05-20 13:24:01 +02001801 cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1802 -T u-boot.lds $(u-boot-init) \
Simon Glassce2f09b2022-01-04 03:51:17 -07001803 --whole-archive \
Marek Behún14458362021-05-20 13:24:01 +02001804 $(u-boot-main) \
Simon Glassce2f09b2022-01-04 03:51:17 -07001805 --no-whole-archive \
Marek Behún14458362021-05-20 13:24:01 +02001806 $(PLATFORM_LIBS) -Map u-boot.map; \
1807 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
Marek Behúnc1094982021-05-20 13:24:03 +02001808endif
Simon Glass86eb49b2011-10-03 19:26:50 +00001809
Vasili Galkacac8f382014-08-14 12:40:55 +03001810quiet_cmd_smap = GEN common/system_map.o
1811cmd_smap = \
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001812 smap=`$(call SYSTEM_MAP,u-boot) | \
1813 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1814 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1815 -c $(srctree)/common/system_map.c -o common/system_map.o
Vasili Galkacac8f382014-08-14 12:40:55 +03001816
Marek Behúnc1094982021-05-20 13:24:03 +02001817u-boot: $(u-boot-init) $(u-boot-main) $(u-boot-keep-syms-lto) u-boot.lds FORCE
Paul Burton09bebb82017-06-15 17:05:09 -07001818 +$(call if_changed,u-boot__)
Vasili Galkacac8f382014-08-14 12:40:55 +03001819ifeq ($(CONFIG_KALLSYMS),y)
1820 $(call cmd,smap)
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001821 $(call cmd,u-boot__) common/system_map.o
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001822endif
wdenk7ebf7442002-11-02 23:17:16 +00001823
Rick Chen42ac26f2017-12-26 13:55:56 +08001824ifeq ($(CONFIG_RISCV),y)
1825 @tools/prelink-riscv $@ 0
1826endif
1827
Stephen Warren7ed48482016-02-08 14:44:15 -07001828quiet_cmd_sym ?= SYM $@
1829 cmd_sym ?= $(OBJDUMP) -t $< > $@
1830u-boot.sym: u-boot FORCE
1831 $(call if_changed,sym)
1832
Simon Glass86b9c3e2021-10-21 21:08:46 -06001833# Environment processing
1834# ---------------------------------------------------------------------------
1835
1836# Directory where we expect the .env file, if it exists
1837ENV_DIR := $(srctree)/board/$(BOARDDIR)
1838
1839# Basename of .env file, stripping quotes
1840ENV_SOURCE_FILE := $(CONFIG_ENV_SOURCE_FILE:"%"=%)
1841
1842# Filename of .env file
1843ENV_FILE_CFG := $(ENV_DIR)/$(ENV_SOURCE_FILE).env
1844
1845# Default filename, if CONFIG_ENV_SOURCE_FILE is empty
1846ENV_FILE_BOARD := $(ENV_DIR)/$(CONFIG_SYS_BOARD:"%"=%).env
1847
1848# Select between the CONFIG_ENV_SOURCE_FILE and the default one
1849ENV_FILE := $(if $(ENV_SOURCE_FILE),$(ENV_FILE_CFG),$(wildcard $(ENV_FILE_BOARD)))
1850
1851# Run the environment text file through the preprocessor, but only if it is
1852# non-empty, to save time and possible build errors if something is wonky with
Simon Glassf432eb62022-03-11 22:37:23 -07001853# the board.
1854# If there is no ENV_FILE, produce an empty output file, to prevent a previous
1855# build's file being used in the case of in-tree builds.
Simon Glass86b9c3e2021-10-21 21:08:46 -06001856quiet_cmd_gen_envp = ENVP $@
1857 cmd_gen_envp = \
1858 if [ -s "$(ENV_FILE)" ]; then \
1859 $(CPP) -P $(CFLAGS) -x assembler-with-cpp -D__ASSEMBLY__ \
1860 -D__UBOOT_CONFIG__ \
1861 -I . -I include -I $(srctree)/include \
1862 -include linux/kconfig.h -include include/config.h \
1863 -I$(srctree)/arch/$(ARCH)/include \
1864 $< -o $@; \
1865 else \
Andrey Zhizhikine75c5b92022-04-03 16:06:03 +02001866 rm -f $@; \
qthedev42db3732022-02-05 10:25:16 +00001867 touch $@ ; \
Simon Glass86b9c3e2021-10-21 21:08:46 -06001868 fi
1869include/generated/env.in: include/generated/env.txt FORCE
1870 $(call cmd,gen_envp)
1871
1872# Regenerate the environment if it changes
1873# We use 'wildcard' since the file is not required to exist (at present), in
1874# which case we don't want this dependency, but instead should create an empty
1875# file
1876# This rule is useful since it shows the source file for the environment
1877quiet_cmd_envc = ENVC $@
1878 cmd_envc = \
1879 if [ -f "$<" ]; then \
1880 cat $< > $@; \
1881 elif [ -n "$(ENV_SOURCE_FILE)" ]; then \
1882 echo "Missing file $(ENV_FILE_CFG)"; \
1883 else \
qthedev42db3732022-02-05 10:25:16 +00001884 touch $@ ; \
Simon Glass86b9c3e2021-10-21 21:08:46 -06001885 fi
1886
1887include/generated/env.txt: $(wildcard $(ENV_FILE)) FORCE
1888 $(call cmd,envc)
1889
1890# Write out the resulting environment, converted to a C string
1891quiet_cmd_gen_envt = ENVT $@
1892 cmd_gen_envt = \
1893 awk -f $(srctree)/scripts/env2string.awk $< >$@
1894$(env_h): include/generated/env.in
1895 $(call cmd,gen_envt)
1896
1897# ---------------------------------------------------------------------------
1898
Michal Simek69c0d322014-04-24 15:24:28 +02001899# The actual objects are generated when descending,
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001900# make sure no implicit rule kicks in
1901$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
Marian Balakowiczf9328632006-09-01 19:49:50 +02001902
Thomas Hebb32f2ca22019-11-13 18:18:03 -08001903# Handle descending into subdirectories listed in $(u-boot-dirs)
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001904# Preset locale variables to speed up the build process. Limit locale
1905# tweaks to this spot to avoid wrong language settings when running
1906# make menuconfig etc.
1907# Error messages still appears in the original language
wdenka8c7c702003-12-06 19:49:23 +00001908
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001909PHONY += $(u-boot-dirs)
Masahiro Yamada63780082014-02-24 11:12:10 +09001910$(u-boot-dirs): prepare scripts
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001911 $(Q)$(MAKE) $(build)=$@
Masahiro Yamada940db162014-02-04 17:24:10 +09001912
Masahiro Yamada74241452014-02-24 11:12:09 +09001913tools: prepare
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001914# The "tools" are needed early
1915$(filter-out tools, $(u-boot-dirs)): tools
1916# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1917# is "yes"), so compile examples after U-Boot is compiled.
1918examples: $(filter-out examples, $(u-boot-dirs))
1919
Masahiro Yamada74241452014-02-24 11:12:09 +09001920define filechk_uboot.release
1921 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1922endef
1923
1924# Store (new) UBOOTRELEASE string in include/config/uboot.release
Masahiro Yamada51148792014-07-30 14:08:17 +09001925include/config/uboot.release: include/config/auto.conf FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001926 $(call filechk,uboot.release)
1927
1928
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001929# Things we need to do before we recursively start building the kernel
1930# or the modules are listed in "prepare".
1931# A multi level approach is used. prepareN is processed before prepareN-1.
1932# archprepare is used in arch Makefiles and when processed asm symlink,
1933# version.h and scripts_basic is processed / created.
1934
1935# Listed in dependency order
1936PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1937
1938# prepare3 is used to check if we are building in a separate output directory,
1939# and if so do:
1940# 1) Check that make has not been executed in the kernel src $(srctree)
Masahiro Yamada74241452014-02-24 11:12:09 +09001941prepare3: include/config/uboot.release
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001942ifneq ($(KBUILD_SRC),)
Masahiro Yamada51148792014-07-30 14:08:17 +09001943 @$(kecho) ' Using $(srctree) as source for U-Boot'
1944 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001945 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1946 echo >&2 " in the '$(srctree)' directory.";\
1947 /bin/false; \
1948 fi;
1949endif
1950
1951# prepare2 creates a makefile if using a separate output directory
Masahiro Yamada0b588de2019-01-10 23:11:39 +09001952prepare2: prepare3 outputmakefile cfg
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001953
Simon Glass86b9c3e2021-10-21 21:08:46 -06001954prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) $(env_h) \
Masahiro Yamada51148792014-07-30 14:08:17 +09001955 include/config/auto.conf
Masahiro Yamada4a377552014-02-25 19:26:48 +09001956ifeq ($(wildcard $(LDSCRIPT)),)
1957 @echo >&2 " Could not find linker script."
1958 @/bin/false
1959endif
wdenk7ebf7442002-11-02 23:17:16 +00001960
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001961ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
1962prepare1: $(defaultenv_h)
Joel Stanley2a2896b2021-06-18 11:35:59 +09301963
1964envtools: $(defaultenv_h)
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001965endif
1966
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001967archprepare: prepare1 scripts_basic
wdenka8c7c702003-12-06 19:49:23 +00001968
Masahiro Yamada6a44d802014-02-24 11:12:11 +09001969prepare0: archprepare FORCE
1970 $(Q)$(MAKE) $(build)=.
wdenk7ebf7442002-11-02 23:17:16 +00001971
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001972# All the preparing..
1973prepare: prepare0
Che-liang Chiou349e83f2011-10-17 21:04:15 +00001974
Masahiro Yamada74241452014-02-24 11:12:09 +09001975# Generate some files
1976# ---------------------------------------------------------------------------
1977
Simon Glass68f6a902021-02-04 21:17:13 -07001978# Use sed to remove leading zeros from PATCHLEVEL to avoid using octal numbers
Masahiro Yamada74241452014-02-24 11:12:09 +09001979define filechk_version.h
1980 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1981 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
Simon Glass68f6a902021-02-04 21:17:13 -07001982 echo \#define U_BOOT_VERSION_NUM $(VERSION); \
1983 echo \#define U_BOOT_VERSION_NUM_PATCH $$(echo $(PATCHLEVEL) | \
1984 sed -e "s/^0*//"); \
Vagrant Cascadian42ffa512016-06-12 06:07:07 -07001985 echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
1986 echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
Masahiro Yamada74241452014-02-24 11:12:09 +09001987endef
1988
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001989# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1990# The BSD date on the other hand behaves different and would produce errors
1991# with the misused '-d' switch. Respect that and search a working date with
1992# well known pre- and suffixes for the GNU variant of date.
Masahiro Yamada74241452014-02-24 11:12:09 +09001993define filechk_timestamp.h
Chris Packham70d39f52015-08-13 18:08:27 +12001994 (if test -n "$${SOURCE_DATE_EPOCH}"; then \
1995 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001996 DATE=""; \
1997 for date in gdate date.gnu date; do \
1998 $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1999 done; \
2000 if test -n "$${DATE}"; then \
2001 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
2002 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
2003 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
Heinrich Schuchardtcbf0ffe2020-10-25 07:25:05 +01002004 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_EPOCH %s'; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02002005 else \
2006 return 42; \
2007 fi; \
Chris Packham70d39f52015-08-13 18:08:27 +12002008 else \
2009 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
2010 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
2011 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
Heinrich Schuchardtcbf0ffe2020-10-25 07:25:05 +01002012 LC_ALL=C date +'#define U_BOOT_EPOCH %s'; \
Chris Packham70d39f52015-08-13 18:08:27 +12002013 fi)
Masahiro Yamada74241452014-02-24 11:12:09 +09002014endef
2015
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01002016define filechk_defaultenv.h
Rasmus Villemoes7ac70382021-04-22 09:44:18 +02002017 ( { grep -v '^#' | grep -v '^$$' || true ; echo '' ; } | \
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01002018 tr '\n' '\0' | \
Samuel Mescoff4b7f5f32019-04-15 12:28:26 +02002019 sed -e 's/\\\x0\s*//g' | \
Rasmus Villemoes7ac70382021-04-22 09:44:18 +02002020 xxd -i ; )
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01002021endef
2022
Michal Simekdacec832020-02-18 15:03:13 +01002023define filechk_dt.h
2024 (if test -n "$${DEVICE_TREE}"; then \
2025 echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
2026 else \
2027 echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
2028 fi)
2029endef
2030
Masahiro Yamada2e6b2f62014-03-10 10:42:27 +09002031$(version_h): include/config/uboot.release FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09002032 $(call filechk,version.h)
2033
2034$(timestamp_h): $(srctree)/Makefile FORCE
2035 $(call filechk,timestamp.h)
2036
Michal Simekdacec832020-02-18 15:03:13 +01002037$(dt_h): $(srctree)/Makefile FORCE
2038 $(call filechk,dt.h)
2039
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01002040$(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
2041 $(call filechk,defaultenv.h)
2042
Masahiro Yamada63780082014-02-24 11:12:10 +09002043# ---------------------------------------------------------------------------
Tom Rini473fc272021-06-17 18:07:25 -04002044# Devicetree files
2045
2046ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
2047dtstree := arch/$(SRCARCH)/boot/dts
2048endif
2049
2050ifneq ($(dtstree),)
2051
2052%.dtb: prepare3 scripts_dtc
2053 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
2054
2055PHONY += dtbs dtbs_install
2056dtbs: prepare3 scripts_dtc
2057 $(Q)$(MAKE) $(build)=$(dtstree)
2058
2059dtbs_install:
2060 $(Q)$(MAKE) $(dtbinst)=$(dtstree)
2061
2062ifdef CONFIG_OF_EARLY_FLATTREE
2063all: dtbs
2064endif
2065
2066endif
2067
Simon Glass93b19652021-09-22 11:34:44 -06002068# Check dtc and pylibfdt, if DTC is provided, else build them
Tom Rini473fc272021-06-17 18:07:25 -04002069PHONY += scripts_dtc
2070scripts_dtc: scripts_basic
Simon Glass93b19652021-09-22 11:34:44 -06002071 $(Q)if test "$(DTC)" = "$(DTC_INTREE)"; then \
2072 $(MAKE) $(build)=scripts/dtc; \
2073 else \
2074 if ! $(DTC) -v >/dev/null; then \
2075 echo '*** Failed to check dtc version: $(DTC)'; \
2076 false; \
2077 else \
2078 if test "$(call dtc-version)" -lt $(DTC_MIN_VERSION); then \
2079 echo '*** Your dtc is too old, please upgrade to dtc $(DTC_MIN_VERSION) or newer'; \
2080 false; \
2081 else \
2082 if [ -n "$(CONFIG_PYLIBFDT)" ]; then \
2083 if ! echo "import libfdt" | $(PYTHON3) 2>/dev/null; then \
2084 echo '*** pylibfdt does not seem to be available with $(PYTHON3)'; \
2085 false; \
2086 fi; \
2087 fi; \
2088 fi; \
2089 fi; \
2090 fi
Tom Rini473fc272021-06-17 18:07:25 -04002091
2092# ---------------------------------------------------------------------------
Masahiro Yamada04a34c92014-02-24 11:12:19 +09002093quiet_cmd_cpp_lds = LDS $@
Chris Zankelde5e5ce2016-08-10 18:36:43 +03002094cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
Simon Glass44093a12018-10-01 12:22:43 -06002095 -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
Masahiro Yamada63780082014-02-24 11:12:10 +09002096
Masahiro Yamada04a34c92014-02-24 11:12:19 +09002097u-boot.lds: $(LDSCRIPT) prepare FORCE
Masahiro Yamada395e60c2014-04-09 20:10:43 +09002098 $(call if_changed_dep,cpp_lds)
Wolfgang Denk1aada9c2009-08-17 14:00:53 +02002099
Masahiro Yamada982a1192014-02-24 11:12:17 +09002100spl/u-boot-spl.bin: spl/u-boot-spl
2101 @:
Heinrich Schuchardt0a0f2312019-04-02 19:19:06 +02002102 $(SPL_SIZE_CHECK)
2103
Dalon Westergreen9773ebc2021-03-01 20:04:16 +08002104spl/u-boot-spl-dtb.bin: spl/u-boot-spl
2105 @:
2106
2107spl/u-boot-spl-dtb.hex: spl/u-boot-spl
2108 @:
2109
Simon Glass70bed2f2022-04-30 00:56:50 -06002110spl/u-boot-spl: tools prepare $(if $(CONFIG_SPL_OF_CONTROL),dts/dt.dtb)
Masahiro Yamadac7163082014-06-09 15:14:11 +09002111 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
Daniel Schwierzeck5df2ee22011-07-13 05:11:04 +00002112
Ian Campbell50827a52014-05-05 11:52:30 +01002113spl/sunxi-spl.bin: spl/u-boot-spl
2114 @:
2115
Maxime Ripardd2fdcc72017-02-27 18:22:13 +01002116spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
2117 @:
2118
Simon Glassbd7dc382016-01-31 18:10:53 -07002119spl/u-boot-spl.sfp: spl/u-boot-spl
Marek Vasut333b7202015-07-15 02:53:45 +02002120 @:
2121
Nathan Rossi08598d62015-11-17 22:56:57 +10002122spl/boot.bin: spl/u-boot-spl
2123 @:
2124
Simon Glassd3eba952022-04-30 00:56:51 -06002125tpl/u-boot-tpl.bin: tpl/u-boot-tpl
2126 @:
Simon Glassc52b5e82019-10-20 21:31:52 -06002127 $(TPL_SIZE_CHECK)
Ying Zhang3aa29de2013-08-16 15:16:15 +08002128
Simon Glassd3eba952022-04-30 00:56:51 -06002129tpl/u-boot-tpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
2130 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
2131
Simon Glassf86ca5a2022-04-30 00:56:52 -06002132vpl/u-boot-vpl.bin: vpl/u-boot-vpl
2133 @:
2134 $(VPL_SIZE_CHECK)
2135
2136vpl/u-boot-vpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
2137 $(Q)$(MAKE) obj=vpl -f $(srctree)/scripts/Makefile.spl all
2138
Igor Grinberg8d819ab2014-07-15 15:52:00 +03002139TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
Jean-Christophe PLAGNIOL-VILLARDa340c322007-11-25 18:45:47 +01002140
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00002141FIND := find
2142FINDFLAGS := -L
2143
Marian Balakowiczf9328632006-09-01 19:49:50 +02002144tags ctags:
Masahiro Yamada9e414032014-02-04 17:24:24 +09002145 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08002146 -name '*.[chS]' -print`
Du Huanpeng74d339b2015-05-04 06:26:53 -07002147 ln -s ctags tags
wdenk7ebf7442002-11-02 23:17:16 +00002148
2149etags:
Igor Grinberg8d819ab2014-07-15 15:52:00 +03002150 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08002151 -name '*.[chS]' -print`
Li Yangffda5862008-02-29 11:46:05 +08002152cscope:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00002153 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
2154 cscope.files
Andy Shevchenkoe15a9512019-10-08 21:12:45 +03002155 @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
2156 grep -xvf - cscope.files > cscope.files.no-symlinks; \
2157 mv cscope.files.no-symlinks cscope.files
Li Yangffda5862008-02-29 11:46:05 +08002158 cscope -b -q -k
wdenk7ebf7442002-11-02 23:17:16 +00002159
Mike Frysingerecb1dc82009-05-20 04:35:14 -04002160SYSTEM_MAP = \
2161 $(NM) $1 | \
wdenk7ebf7442002-11-02 23:17:16 +00002162 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
Mike Frysingerecb1dc82009-05-20 04:35:14 -04002163 LC_ALL=C sort
Masahiro Yamada9e414032014-02-04 17:24:24 +09002164System.map: u-boot
Masahiro Yamadabc8bb6e2013-11-11 14:36:01 +09002165 @$(call SYSTEM_MAP,$<) > $@
wdenk7ebf7442002-11-02 23:17:16 +00002166
2167#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +00002168
Scott Wood54799e42013-12-14 11:47:34 +08002169# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
2170# R_AARCH64_RELATIVE (64-bit).
Masahiro Yamada9e414032014-02-04 17:24:24 +09002171checkarmreloc: u-boot
Scott Wood54799e42013-12-14 11:47:34 +08002172 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
2173 grep R_A | sort -u`"; \
2174 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
2175 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
2176 echo "$< contains unexpected relocations: $$RELOC"; \
2177 false; \
2178 fi
Albert ARIBAUDc37980c2013-06-11 14:17:30 +02002179
Bin Meng4d90f6c2019-10-27 05:19:47 -07002180tools/version.h: include/version.h
Tom Rinifb013ee2019-12-04 18:54:30 -05002181 $(Q)mkdir -p $(dir $@)
Bin Meng4d90f6c2019-10-27 05:19:47 -07002182 $(call if_changed,copy)
2183
2184envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h
Tom Rini2d3229b2017-09-05 14:01:29 -04002185 $(Q)$(MAKE) $(build)=tools/env
Mike Frysinger0358df42010-08-15 00:03:21 -04002186
Simon Goldschmidt25770152019-05-24 22:07:04 +02002187tools-only: export TOOLS_ONLY=y
Bin Meng4d90f6c2019-10-27 05:19:47 -07002188tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
Masahiro Yamada4642e002014-03-31 17:33:51 +09002189 $(Q)$(MAKE) $(build)=tools
2190
Masahiro Yamada1ec8b4e2014-03-03 11:06:18 +09002191tools-all: export HOST_TOOLS_ALL=y
Simon Glass57332952017-09-05 01:53:58 -06002192tools-all: envtools tools ;
Mike Frysinger0358df42010-08-15 00:03:21 -04002193
Masahiro Yamadadb5b3392014-03-03 11:06:19 +09002194cross_tools: export CROSS_BUILD_TOOLS=y
2195cross_tools: tools ;
2196
Wolfgang Denk4e53a252006-10-25 00:43:17 +02002197.PHONY : CHANGELOG
2198CHANGELOG:
Ben Warrenb985b5d2006-10-26 14:38:25 -04002199 git log --no-merges U-Boot-1_1_5.. | \
2200 unexpand -a | sed -e 's/\s\s*$$//' > $@
Wolfgang Denk4e53a252006-10-25 00:43:17 +02002201
wdenk7ebf7442002-11-02 23:17:16 +00002202#########################################################################
2203
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002204###
2205# Cleaning is done on three levels.
2206# make clean Delete most generated files
2207# Leave enough to build external modules
2208# make mrproper Delete the current configuration, and all generated files
2209# make distclean Remove editor backup files, patch leftover files and the like
wdenk7ebf7442002-11-02 23:17:16 +00002210
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002211# Directories & files removed with 'make clean'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002212CLEAN_DIRS += $(MODVERDIR) \
2213 $(foreach d, spl tpl, $(patsubst %,$d/%, \
Masahiro Yamada51148792014-07-30 14:08:17 +09002214 $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002215
Heinrich Schuchardt0652d442022-03-19 13:33:25 +01002216CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
Tom Rini07b96422022-06-13 22:57:31 -04002217 include/generated/env.* drivers/video/u_boot_logo.S \
Heinrich Schuchardt6a56fc02022-03-30 12:11:00 +02002218 tools/version.h u-boot* MLO* SPL System.map fit-dtb.blob* \
Thomas Hebb57297e62019-11-10 08:25:08 -08002219 u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
Thomas Hebb983c0f92019-11-10 08:25:10 -08002220 lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
Adam Ford824204e2021-12-22 10:40:27 -06002221 idbloader.img flash.bin flash.log defconfig keep-syms-lto.c \
2222 mkimage-out.spl.mkimage mkimage.spl.mkimage imx-boot.map \
2223 itb.fit.fit itb.fit.itb itb.map spl.map
Mike Frysinger9f4a4202009-10-01 12:11:54 -04002224
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002225# Directories & files removed with 'make mrproper'
Masahiro Yamada51148792014-07-30 14:08:17 +09002226MRPROPER_DIRS += include/config include/generated spl tpl \
Simon Glassc72c7d92021-07-02 12:36:13 -06002227 .tmp_objdiff doc/output include/asm
Simon Glassa7d03d52021-05-06 19:32:23 -06002228
2229# Remove include/asm symlink created by U-Boot before v2014.01
Masahiro Yamada51148792014-07-30 14:08:17 +09002230MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
Heinrich Schuchardt1249fa82019-01-29 21:15:21 +01002231 ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
Simon Glassa7d03d52021-05-06 19:32:23 -06002232 drivers/video/fonts/*.S include/asm
wdenk7ebf7442002-11-02 23:17:16 +00002233
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002234# clean - Delete most, but leave enough to build external modules
2235#
2236clean: rm-dirs := $(CLEAN_DIRS)
2237clean: rm-files := $(CLEAN_FILES)
wdenk7ebf7442002-11-02 23:17:16 +00002238
Masahiro Yamada6bd04bb2014-03-28 14:55:02 +09002239clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
Andy Fleming734329f2011-11-21 13:40:43 +00002240
Tom Rini08fcdd32018-07-25 11:38:17 -04002241clean-dirs := $(addprefix _clean_, $(clean-dirs))
wdenk7ebf7442002-11-02 23:17:16 +00002242
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002243PHONY += $(clean-dirs) clean archclean
2244$(clean-dirs):
2245 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
2246
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002247clean: $(clean-dirs)
2248 $(call cmd,rmdirs)
2249 $(call cmd,rmfiles)
2250 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
2251 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
Heinrich Schuchardtd4c51412019-10-03 16:45:29 +00002252 -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002253 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
Eugeniu Roscae91610d2018-05-19 14:13:50 +02002254 -o -name '*.lex.c' -o -name '*.tab.[ch]' \
AKASHI Takahiroed3dead2019-11-13 09:44:54 +09002255 -o -name '*.asn1.[ch]' \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002256 -o -name '*.symtypes' -o -name 'modules.order' \
2257 -o -name modules.builtin -o -name '.tmp_*.o.*' \
Philippe Reynes5d94cbd2022-02-22 14:54:39 +01002258 -o -name 'dsdt_generated.aml' -o -name 'dsdt_generated.asl.tmp' \
2259 -o -name 'dsdt_generated.c' \
Heinrich Schuchardt7f474ef2018-05-24 19:34:45 +02002260 -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
Thomas Hebb0f18cf32019-11-10 08:25:09 -08002261 -type f -print | xargs rm -f
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002262
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002263# mrproper - Delete all generated files, including .config
2264#
2265mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
2266mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
2267mrproper-dirs := $(addprefix _mrproper_,scripts)
2268
2269PHONY += $(mrproper-dirs) mrproper archmrproper
2270$(mrproper-dirs):
2271 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
2272
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002273mrproper: clean $(mrproper-dirs)
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002274 $(call cmd,rmdirs)
2275 $(call cmd,rmfiles)
Masahiro Yamadae9c16a82014-06-24 18:15:45 +09002276 @rm -f arch/*/include/asm/arch
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002277
2278# distclean
2279#
2280PHONY += distclean
Masahiro Yamada433b2f12014-02-04 17:24:35 +09002281
2282distclean: mrproper
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002283 @find $(srctree) $(RCS_FIND_IGNORE) \
2284 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
2285 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
Masahiro Yamada598e2d32014-04-15 13:29:00 +09002286 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
2287 -o -name '*.pyc' \) \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002288 -type f -print | xargs rm -f
Robert P. J. Dayc1180aa2019-01-18 08:41:23 -05002289 @rm -f boards.cfg CHANGELOG
wdenk7ebf7442002-11-02 23:17:16 +00002290
Simon Glassfeafc612021-11-21 20:48:40 -07002291# See doc/develop/python_cq.rst
Simon Glassf44a52a2022-02-11 13:23:24 -07002292PHONY += pylint pylint_err
Simon Glassfeafc612021-11-21 20:48:40 -07002293PYLINT_BASE := scripts/pylint.base
2294PYLINT_CUR := pylint.cur
2295PYLINT_DIFF := pylint.diff
2296pylint:
2297 $(Q)echo "Running pylint on all files (summary in $(PYLINT_CUR); output in pylint.out/)"
2298 $(Q)mkdir -p pylint.out
2299 $(Q)rm -f pylint.out/out*
2300 $(Q)find tools test -name "*.py" \
2301 | xargs -n1 -P$(shell nproc 2>/dev/null || echo 1) \
2302 sh -c 'pylint --reports=y --exit-zero -f parseable --ignore-imports=yes $$@ > pylint.out/$$(echo $$@ | tr / _ | sed s/.py//)' _
Simon Glassf8753f02022-01-28 21:31:07 -07002303 $(Q)rm -f $(PYLINT_CUR)
2304 $(Q)( cd pylint.out; for f in *; do \
2305 sed -ne "s/Your code has been rated at \([-0-9.]*\).*/$$f \1/p" $$f; \
2306 done ) | sort > $(PYLINT_CUR)
Simon Glassfeafc612021-11-21 20:48:40 -07002307 $(Q)base=$$(mktemp) cur=$$(mktemp); cut -d' ' -f1 $(PYLINT_BASE) >$$base; \
2308 cut -d' ' -f1 $(PYLINT_CUR) >$$cur; \
2309 comm -3 $$base $$cur > $(PYLINT_DIFF); \
2310 if [ -s $(PYLINT_DIFF) ]; then \
2311 echo "Files have been added/removed. Try:\n\tcp $(PYLINT_CUR) $(PYLINT_BASE)"; \
2312 echo; \
2313 echo "Added files:"; \
2314 comm -13 $$base $$cur; \
2315 echo; \
2316 echo "Removed files:"; \
2317 comm -23 $$base $$cur; \
2318 false; \
2319 else \
2320 rm $$base $$cur $(PYLINT_DIFF); \
2321 fi
2322 $(Q)bad=false; while read base_file base_val <&3 && read cur_file cur_val <&4; do \
2323 if awk "BEGIN {exit !($$cur_val < $$base_val)}"; then \
2324 echo "$$base_file: Score was $$base_val, now $$cur_val"; \
2325 bad=true; fi; \
2326 done 3<$(PYLINT_BASE) 4<$(PYLINT_CUR); \
2327 if $$bad; then \
2328 echo "Some files have regressed, please fix"; \
2329 false; \
2330 else \
2331 echo "No pylint regressions"; \
2332 fi
2333
Simon Glassf44a52a2022-02-11 13:23:24 -07002334# Check for errors only
2335pylint_err:
2336 $(Q)pylint -E -j 0 --ignore-imports=yes \
2337 $(shell find tools test -name "*.py")
2338
wdenk7ebf7442002-11-02 23:17:16 +00002339backup:
Masahiro Yamada4379ac62014-03-11 11:05:19 +09002340 F=`basename $(srctree)` ; cd .. ; \
Ilya Yanokd6b93712010-06-21 18:13:21 +04002341 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
wdenk7ebf7442002-11-02 23:17:16 +00002342
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002343help:
2344 @echo 'Cleaning targets:'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002345 @echo ' clean - Remove most generated files but keep the config'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002346 @echo ' mrproper - Remove all generated files + config + various backup files'
2347 @echo ' distclean - mrproper + remove editor backup and patch files'
2348 @echo ''
Masahiro Yamada51148792014-07-30 14:08:17 +09002349 @echo 'Configuration targets:'
2350 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
2351 @echo ''
Simon Glassa3a3f5d2018-10-01 21:12:36 -06002352 @echo 'Test targets:'
2353 @echo ''
2354 @echo ' check - Run all automated tests that use sandbox'
Simon Glass499fde52018-11-18 08:14:29 -07002355 @echo ' qcheck - Run quick automated tests that use sandbox'
Simon Glass76160802020-04-17 18:08:59 -06002356 @echo ' tcheck - Run quick automated tests on tools'
Simon Glassfeafc612021-11-21 20:48:40 -07002357 @echo ' pylint - Run pylint on all Python files'
Simon Glassa3a3f5d2018-10-01 21:12:36 -06002358 @echo ''
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002359 @echo 'Other generic targets:'
2360 @echo ' all - Build all necessary images depending on configuration'
Simon Glass633cc7a2016-07-31 17:35:01 -06002361 @echo ' tests - Build U-Boot for sandbox and run tests'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09002362 @echo '* u-boot - Build the bare u-boot'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002363 @echo ' dir/ - Build all files in dir and below'
2364 @echo ' dir/file.[oisS] - Build specified target only'
2365 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
2366 @echo ' (requires a recent binutils and recent build (System.map))'
Igor Grinberg5fc2f922014-07-15 15:52:02 +03002367 @echo ' tags/ctags - Generate ctags file for editors'
2368 @echo ' etags - Generate etags file for editors'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002369 @echo ' cscope - Generate cscope index'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09002370 @echo ' ubootrelease - Output the release version string (use with make -s)'
2371 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
Simon Glass1bd87632016-11-13 14:25:50 -07002372 @echo " cfg - Don't build, just create the .cfg files"
Simon Glass84a42062017-09-05 01:53:59 -06002373 @echo " envtools - Build only the target-side environment tools"
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002374 @echo ''
2375 @echo 'Static analysers'
2376 @echo ' checkstack - Generate a list of stack hogs'
Heinrich Schuchardt8a28caf2017-11-19 14:33:14 +01002377 @echo ' coccicheck - Execute static code analysis with Coccinelle'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002378 @echo ''
2379 @echo 'Documentation targets:'
Breno Matheus Lima656d8da2019-06-05 18:18:30 +00002380 @$(MAKE) -f $(srctree)/doc/Makefile dochelp
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002381 @echo ''
2382 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
2383 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
2384 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
2385 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
2386 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
2387 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
2388 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
2389 @echo ' 1: warnings which may be relevant and do not occur too often'
2390 @echo ' 2: warnings which occur quite often but may still be relevant'
2391 @echo ' 3: more obscure warnings, can most likely be ignored'
2392 @echo ' Multiple levels can be combined with W=12 or W=123'
2393 @echo ''
2394 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
2395 @echo 'For further info see the ./README file'
2396
Simon Glassa3a3f5d2018-10-01 21:12:36 -06002397tests check:
Simon Glass633cc7a2016-07-31 17:35:01 -06002398 $(srctree)/test/run
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09002399
Simon Glass499fde52018-11-18 08:14:29 -07002400qcheck:
2401 $(srctree)/test/run quick
2402
Simon Glass76160802020-04-17 18:08:59 -06002403tcheck:
2404 $(srctree)/test/run tools
2405
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09002406# Documentation targets
2407# ---------------------------------------------------------------------------
Mario Six78a88f72018-07-10 08:40:17 +02002408DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
2409 linkcheckdocs dochelp refcheckdocs
2410PHONY += $(DOC_TARGETS)
2411$(DOC_TARGETS): scripts_basic FORCE
Breno Matheus Lima656d8da2019-06-05 18:18:30 +00002412 $(Q)$(MAKE) $(build)=doc $@
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09002413
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002414PHONY += checkstack ubootrelease ubootversion
2415
2416checkstack:
2417 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
2418 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
2419
2420ubootrelease:
2421 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
2422
2423ubootversion:
2424 @echo $(UBOOTVERSION)
2425
Masahiro Yamada886d86e2014-02-24 11:12:22 +09002426# Single targets
2427# ---------------------------------------------------------------------------
2428# Single targets are compatible with:
2429# - build with mixed source and output
2430# - build with separate output dir 'make O=...'
2431# - external modules
2432#
2433# target-dir => where to store outputfile
2434# build-dir => directory in kernel source tree to use
2435
2436ifeq ($(KBUILD_EXTMOD),)
2437 build-dir = $(patsubst %/,%,$(dir $@))
2438 target-dir = $(dir $@)
2439else
2440 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
2441 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
2442 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
2443endif
2444
2445%.s: %.c prepare scripts FORCE
2446 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2447%.i: %.c prepare scripts FORCE
2448 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2449%.o: %.c prepare scripts FORCE
2450 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2451%.lst: %.c prepare scripts FORCE
2452 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2453%.s: %.S prepare scripts FORCE
2454 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2455%.o: %.S prepare scripts FORCE
2456 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2457%.symtypes: %.c prepare scripts FORCE
2458 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2459
2460# Modules
2461/: prepare scripts FORCE
2462 $(cmd_crmodverdir)
2463 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2464 $(build)=$(build-dir)
2465%/: prepare scripts FORCE
2466 $(cmd_crmodverdir)
2467 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2468 $(build)=$(build-dir)
2469%.ko: prepare scripts FORCE
2470 $(cmd_crmodverdir)
2471 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2472 $(build)=$(build-dir) $(@:.ko=.o)
2473 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
2474
Jan Kiszka2600dd82021-06-20 22:29:13 +02002475quiet_cmd_genenv = GENENV $@
Stefano Babicbdaa73a2019-03-13 09:46:45 +01002476cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
Christoph Niedermaiercc5a4902022-03-01 09:38:51 +01002477 sed --in-place -e 's/\x00/\x0A/g' $@; sed --in-place -e '/^\s*$$/d' $@; \
2478 sort --field-separator== -k1,1 --stable $@ -o $@
Stefano Babicbdaa73a2019-03-13 09:46:45 +01002479
2480u-boot-initial-env: u-boot.bin
2481 $(call if_changed,genenv)
2482
Heinrich Schuchardt8a28caf2017-11-19 14:33:14 +01002483# Consistency checks
2484# ---------------------------------------------------------------------------
2485
2486PHONY += coccicheck
2487
2488coccicheck:
2489 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
2490
Michal Simek69c0d322014-04-24 15:24:28 +02002491# FIXME Should go into a make.lib or something
Masahiro Yamada886d86e2014-02-24 11:12:22 +09002492# ===========================================================================
2493
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002494quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
2495 cmd_rmdirs = rm -rf $(rm-dirs)
2496
2497quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
2498 cmd_rmfiles = rm -f $(rm-files)
2499
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09002500# read all saved command lines
2501
Tom Rini473fc272021-06-17 18:07:25 -04002502cmd_files := $(wildcard .*.cmd)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09002503
2504ifneq ($(cmd_files),)
2505 $(cmd_files): ; # Do not try to update included dependency files
2506 include $(cmd_files)
2507endif
2508
Tom Rini473fc272021-06-17 18:07:25 -04002509endif #ifeq ($(config-targets),1)
2510endif #ifeq ($(mixed-targets),1)
Masahiro Yamada9e414032014-02-04 17:24:24 +09002511endif # skip-makefile
2512
2513PHONY += FORCE
2514FORCE:
2515
Tom Rini5972ff02020-03-11 18:11:17 -04002516# Declare the contents of the PHONY variable as phony. We keep that
Masahiro Yamada9e414032014-02-04 17:24:24 +09002517# information in a variable so we can use it in if_changed and friends.
2518.PHONY: $(PHONY)