Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / 5c05508971ff9cd0a989f2013d8cd036c89f3e5c / . / board / freescale / common / qixis.h
blob: 51ce9c328de10e8d21eb1741307bf37405b0c8f4 [file] [log] [blame]
Shengzhou Liuae6b03f2011-11-22 16:51:13 +0800[diff] [blame]1/*
2 * Copyright 2011 Freescale Semiconductor
3 * Author: Shengzhou Liu <Shengzhou.Liu@freescale.com>
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +0200[diff] [blame]5 * SPDX-License-Identifier: GPL-2.0+
Shengzhou Liuae6b03f2011-11-22 16:51:13 +0800[diff] [blame]6 *
7 * This file provides support for the QIXIS of some Freescale reference boards.
8 */
9
10#ifndef __QIXIS_H_
11#define __QIXIS_H_
12
13struct qixis {
14 u8 id; /* ID value uniquely identifying each QDS board type */
15 u8 arch; /* Board version information */
16 u8 scver; /* QIXIS Version Register */
17 u8 model; /* Information of software programming model version */
18 u8 tagdata;
19 u8 ctl_sys;
20 u8 aux; /* Auxiliary Register,0x06 */
21 u8 clk_spd;
22 u8 stat_dut;
23 u8 stat_sys;
24 u8 stat_alrm;
25 u8 present;
Shengzhou Liue4de13e2012-10-07 20:21:02 +0000[diff] [blame]26 u8 present2; /* Presence Status Register 2,0x0c */
Shengzhou Liuae6b03f2011-11-22 16:51:13 +0800[diff] [blame]27 u8 rcw_ctl;
28 u8 ctl_led;
29 u8 i2cblk;
30 u8 rcfg_ctl; /* Reconfig Control Register,0x10 */
31 u8 rcfg_st;
32 u8 dcm_ad;
33 u8 dcm_da;
34 u8 dcmd;
35 u8 dmsg;
36 u8 gdc;
37 u8 gdd; /* DCM Debug Data Register,0x17 */
38 u8 dmack;
39 u8 res1[6];
40 u8 watch; /* Watchdog Register,0x1F */
41 u8 pwr_ctl[2]; /* Power Control Register,0x20 */
42 u8 res2[2];
43 u8 pwr_stat[4]; /* Power Status Register,0x24 */
44 u8 res3[8];
45 u8 clk_spd2[2]; /* SYSCLK clock Speed Register,0x30 */
46 u8 res4[2];
47 u8 sclk[3]; /* Clock Configuration Registers,0x34 */
48 u8 res5;
49 u8 dclk[3];
50 u8 res6;
51 u8 clk_dspd[3];
52 u8 res7;
53 u8 rst_ctl; /* Reset Control Register,0x40 */
54 u8 rst_stat; /* Reset Status Register */
55 u8 rst_rsn; /* Reset Reason Register */
56 u8 rst_frc[2]; /* Reset Force Registers,0x43 */
57 u8 res8[11];
58 u8 brdcfg[16]; /* Board Configuration Register,0x50 */
59 u8 dutcfg[16];
60 u8 rcw_ad[2]; /* RCW SRAM Address Registers,0x70 */
61 u8 rcw_data;
62 u8 res9[5];
63 u8 post_ctl;
64 u8 post_stat;
65 u8 post_dat[2];
66 u8 pi_d[4];
67 u8 gpio_io[4];
68 u8 gpio_dir[4];
69 u8 res10[20];
70 u8 rjtag_ctl;
71 u8 rjtag_dat;
72 u8 res11[2];
73 u8 trig_src[4];
74 u8 trig_dst[4];
75 u8 trig_stat;
76 u8 res12[3];
77 u8 trig_ctr[4];
Ed Swarthout428ea862013-03-25 07:40:09 +0000[diff] [blame]78 u8 res13[16];
79 u8 clk_freq[6]; /* Clock Measurement Registers */
80 u8 res_c6[8];
81 u8 clk_base[2]; /* Clock Frequency Base Reg */
Prabhakar Kushwaha7d436072013-09-12 11:11:28 +0530[diff] [blame]82 u8 res_d0[8];
83 u8 cms[2]; /* Core Management Space Address Register, 0xD8 */
84 u8 res_c0[6];
Shengzhou Liuae6b03f2011-11-22 16:51:13 +0800[diff] [blame]85 u8 aux2[4]; /* Auxiliary Registers,0xE0 */
86 u8 res14[10];
87 u8 aux_ad;
88 u8 aux_da;
89 u8 res15[16];
90};
91
Shengzhou Liuae6b03f2011-11-22 16:51:13 +0800[diff] [blame]92u8 qixis_read(unsigned int reg);
93void qixis_write(unsigned int reg, u8 value);
Prabhakar Kushwaha2ae4e8d2012-12-23 19:24:47 +0000[diff] [blame]94u16 qixis_read_minor(void);
95char *qixis_read_time(char *result);
96char *qixis_read_tag(char *buf);
Shaveta Leekhac6cef922012-12-23 19:25:35 +0000[diff] [blame]97const char *byte_to_binary_mask(u8 val, u8 mask, char *buf);
Prabhakar Kushwaha960aa892013-01-23 17:59:37 +0000[diff] [blame]98#ifdef CONFIG_SYS_I2C_FPGA_ADDR
99u8 qixis_read_i2c(unsigned int reg);
100void qixis_write_i2c(unsigned int reg, u8 value);
101#endif
Shengzhou Liuae6b03f2011-11-22 16:51:13 +0800[diff] [blame]102
Alison Wang2565d182014-12-03 15:00:46 +0800[diff] [blame]103#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CONFIG_SYS_I2C_FPGA_ADDR)
104#define QIXIS_READ(reg) qixis_read_i2c(offsetof(struct qixis, reg))
105#define QIXIS_WRITE(reg, value) \
106 qixis_write_i2c(offsetof(struct qixis, reg), value)
107#else
Shengzhou Liuae6b03f2011-11-22 16:51:13 +0800[diff] [blame]108#define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
109#define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
Alison Wang2565d182014-12-03 15:00:46 +0800[diff] [blame]110#endif
111
Prabhakar Kushwaha960aa892013-01-23 17:59:37 +0000[diff] [blame]112#ifdef CONFIG_SYS_I2C_FPGA_ADDR
113#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
114#define QIXIS_WRITE_I2C(reg, value) \
115 qixis_write_i2c(offsetof(struct qixis, reg), value)
116#endif
Shengzhou Liuae6b03f2011-11-22 16:51:13 +0800[diff] [blame]117
Yangbo Lu5a8dbdc2015-04-22 13:57:00 +0800[diff] [blame]118/* Use for SDHC adapter card type identification and operation */
119#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
120#define QIXIS_SDID_MASK 0x07
121#define QIXIS_ESDHC_ADAPTER_TYPE_EMMC45 0x1 /* eMMC Card Rev4.5 */
122#define QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY 0x2 /* SD/MMC Legacy Card */
123#define QIXIS_ESDHC_ADAPTER_TYPE_EMMC44 0x3 /* eMMC Card Rev4.4 */
124#define QIXIS_ESDHC_ADAPTER_TYPE_RSV 0x4 /* Reserved */
125#define QIXIS_ESDHC_ADAPTER_TYPE_MMC 0x5 /* MMC Card */
126#define QIXIS_ESDHC_ADAPTER_TYPE_SD 0x6 /* SD Card Rev2.0 3.0 */
127#define QIXIS_ESDHC_NO_ADAPTER 0x7 /* No Card is Present*/
128#define QIXIS_SDCLKIN 0x08
129#define QIXIS_SDCLKOUT 0x02
130#endif
131
Shengzhou Liuae6b03f2011-11-22 16:51:13 +0800[diff] [blame]132#endif