Matt Porter | 2d18ef2 | 2015-05-05 15:00:24 -0400 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2015 |
Kamil Lulko | 5be9356 | 2015-11-29 11:50:53 +0100 | [diff] [blame^] | 3 | * Kamil Lulko, <kamil.lulko@gmail.com> |
Matt Porter | 2d18ef2 | 2015-05-05 15:00:24 -0400 | [diff] [blame] | 4 | * |
| 5 | * Copyright 2015 ATS Advanced Telematics Systems GmbH |
| 6 | * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> |
| 7 | * |
| 8 | * SPDX-License-Identifier: GPL-2.0+ |
| 9 | */ |
| 10 | |
| 11 | #include <common.h> |
| 12 | #include <asm/io.h> |
| 13 | #include <asm/arch/stm32.h> |
| 14 | |
| 15 | #define STM32_FLASH_KEY1 0x45670123 |
| 16 | #define STM32_FLASH_KEY2 0xcdef89ab |
| 17 | |
| 18 | #define STM32_NUM_BANKS 2 |
| 19 | #define STM32_MAX_BANK 0x200 |
| 20 | |
| 21 | flash_info_t flash_info[STM32_NUM_BANKS]; |
| 22 | static struct stm32_flash_bank_regs *flash_bank[STM32_NUM_BANKS]; |
| 23 | |
| 24 | static void stm32f1_flash_lock(u8 bank, u8 lock) |
| 25 | { |
| 26 | if (lock) { |
| 27 | setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_LOCK); |
| 28 | } else { |
| 29 | writel(STM32_FLASH_KEY1, &flash_bank[bank]->keyr); |
| 30 | writel(STM32_FLASH_KEY2, &flash_bank[bank]->keyr); |
| 31 | } |
| 32 | } |
| 33 | |
| 34 | /* Only XL devices are supported (2 KiB sector size) */ |
| 35 | unsigned long flash_init(void) |
| 36 | { |
| 37 | u8 i, banks; |
| 38 | u16 j, size; |
| 39 | |
| 40 | /* Set up accessors for XL devices with wonky register layout */ |
| 41 | flash_bank[0] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr; |
| 42 | flash_bank[1] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr2; |
| 43 | |
| 44 | /* |
| 45 | * Get total flash size (in KiB) and configure number of banks |
| 46 | * present and sector count per bank. |
| 47 | */ |
| 48 | size = readw(&STM32_DES->flash_size); |
| 49 | if (size <= STM32_MAX_BANK) { |
| 50 | banks = 1; |
| 51 | flash_info[0].sector_count = size >> 1; |
| 52 | } else if (size > STM32_MAX_BANK) { |
| 53 | banks = 2; |
| 54 | flash_info[0].sector_count = STM32_MAX_BANK >> 1; |
| 55 | flash_info[1].sector_count = (size - STM32_MAX_BANK) >> 1; |
| 56 | } |
| 57 | |
| 58 | /* Configure start/size for all sectors */ |
| 59 | for (i = 0; i < banks; i++) { |
| 60 | flash_info[i].flash_id = FLASH_STM32F1; |
| 61 | flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 19); |
| 62 | flash_info[i].size = 2048; |
| 63 | for (j = 1; (j < flash_info[i].sector_count); j++) { |
| 64 | flash_info[i].start[j] = flash_info[i].start[j - 1] |
| 65 | + 2048; |
| 66 | flash_info[i].size += 2048; |
| 67 | } |
| 68 | } |
| 69 | |
| 70 | return size << 10; |
| 71 | } |
| 72 | |
| 73 | void flash_print_info(flash_info_t *info) |
| 74 | { |
| 75 | int i; |
| 76 | |
| 77 | if (info->flash_id == FLASH_UNKNOWN) { |
| 78 | printf("Missing or unknown FLASH type\n"); |
| 79 | return; |
| 80 | } else if (info->flash_id == FLASH_STM32F1) { |
| 81 | printf("STM32F1 Embedded Flash\n"); |
| 82 | } |
| 83 | |
| 84 | printf(" Size: %ld MB in %d Sectors\n", |
| 85 | info->size >> 10, info->sector_count); |
| 86 | |
| 87 | printf(" Sector Start Addresses:"); |
| 88 | for (i = 0; i < info->sector_count; ++i) { |
| 89 | if ((i % 5) == 0) |
| 90 | printf("\n "); |
| 91 | printf(" %08lX%s", |
| 92 | info->start[i], |
| 93 | info->protect[i] ? " (RO)" : " "); |
| 94 | } |
| 95 | printf("\n"); |
| 96 | return; |
| 97 | } |
| 98 | |
| 99 | int flash_erase(flash_info_t *info, int first, int last) |
| 100 | { |
| 101 | u8 bank = 0xff; |
| 102 | int i; |
| 103 | |
| 104 | for (i = 0; i < STM32_NUM_BANKS; i++) { |
| 105 | if (info == &flash_info[i]) { |
| 106 | bank = i; |
| 107 | break; |
| 108 | } |
| 109 | } |
| 110 | if (bank == 0xff) |
| 111 | return -1; |
| 112 | |
| 113 | stm32f1_flash_lock(bank, 0); |
| 114 | |
| 115 | for (i = first; i <= last; i++) { |
| 116 | while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) |
| 117 | ; |
| 118 | |
| 119 | setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER); |
| 120 | |
| 121 | writel(info->start[i], &flash_bank[bank]->ar); |
| 122 | |
| 123 | setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_STRT); |
| 124 | |
| 125 | while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) |
| 126 | ; |
| 127 | } |
| 128 | |
| 129 | clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER); |
| 130 | |
| 131 | stm32f1_flash_lock(bank, 1); |
| 132 | |
| 133 | return 0; |
| 134 | } |
| 135 | |
| 136 | int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| 137 | { |
| 138 | ulong i; |
| 139 | u8 bank = 0xff; |
| 140 | |
| 141 | if (addr & 1) { |
| 142 | printf("Flash address must be half word aligned\n"); |
| 143 | return -1; |
| 144 | } |
| 145 | |
| 146 | if (cnt & 1) { |
| 147 | printf("Flash length must be half word aligned\n"); |
| 148 | return -1; |
| 149 | } |
| 150 | |
| 151 | for (i = 0; i < 2; i++) { |
| 152 | if (info == &flash_info[i]) { |
| 153 | bank = i; |
| 154 | break; |
| 155 | } |
| 156 | } |
| 157 | |
| 158 | if (bank == 0xff) |
| 159 | return -1; |
| 160 | |
| 161 | while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) |
| 162 | ; |
| 163 | |
| 164 | stm32f1_flash_lock(bank, 0); |
| 165 | |
| 166 | setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG); |
| 167 | |
| 168 | /* STM32F1 requires half word writes */ |
| 169 | for (i = 0; i < cnt >> 1; i++) { |
| 170 | *(u16 *)(addr + i * 2) = ((u16 *)src)[i]; |
| 171 | while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) |
| 172 | ; |
| 173 | } |
| 174 | |
| 175 | clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG); |
| 176 | |
| 177 | stm32f1_flash_lock(bank, 1); |
| 178 | |
| 179 | return 0; |
| 180 | } |