blob: 85d492ddc5f4965a3355067c06db1773ea502559 [file] [log] [blame]
rev13@wp.pled09a552015-03-01 12:44:42 +01001/*
2 * (C) Copyright 2015
Kamil Lulko66562412015-12-01 09:08:19 +01003 * Kamil Lulko, <kamil.lulko@gmail.com>
rev13@wp.pled09a552015-03-01 12:44:42 +01004 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
Albert ARIBAUDbf104ff2015-10-23 18:06:39 +020011#define CONFIG_SYS_THUMB_BUILD
rev13@wp.pled09a552015-03-01 12:44:42 +010012#define CONFIG_STM32F4DISCOVERY
rev13@wp.pled09a552015-03-01 12:44:42 +010013
14#define CONFIG_OF_LIBFDT
15
16#define CONFIG_BOARD_EARLY_INIT_F
Antonio Borneo089fddf2015-07-19 22:19:46 +080017#define CONFIG_MISC_INIT_R
rev13@wp.pled09a552015-03-01 12:44:42 +010018
19#define CONFIG_SYS_FLASH_BASE 0x08000000
20
21#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
22#define CONFIG_SYS_TEXT_BASE 0x08000000
23
24#define CONFIG_SYS_ICACHE_OFF
25#define CONFIG_SYS_DCACHE_OFF
26
27/*
28 * Configuration of the external SDRAM memory
29 */
30#define CONFIG_NR_DRAM_BANKS 1
31#define CONFIG_SYS_RAM_SIZE (8 << 20)
32#define CONFIG_SYS_RAM_CS 1
33#define CONFIG_SYS_RAM_FREQ_DIV 2
34#define CONFIG_SYS_RAM_BASE 0xD0000000
35#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
36#define CONFIG_SYS_LOAD_ADDR 0xD0400000
37#define CONFIG_LOADADDR 0xD0400000
38
39#define CONFIG_SYS_MAX_FLASH_SECT 12
40#define CONFIG_SYS_MAX_FLASH_BANKS 2
41
42#define CONFIG_ENV_IS_IN_FLASH
43#define CONFIG_ENV_OFFSET (256 << 10)
44#define CONFIG_ENV_SECT_SIZE (128 << 10)
45#define CONFIG_ENV_SIZE (8 << 10)
46
47#define CONFIG_BOARD_SPECIFIC_LED
48#define CONFIG_RED_LED 110
49#define CONFIG_GREEN_LED 109
50
51#define CONFIG_STM32_GPIO
52#define CONFIG_STM32_SERIAL
rev13@wp.pled09a552015-03-01 12:44:42 +010053
54#define CONFIG_STM32_HSE_HZ 8000000
55
Antonio Borneof9fa4a22015-07-19 22:19:48 +080056#define CONFIG_SYS_CLK_FREQ 180000000 /* 180 MHz */
57
rev13@wp.pled09a552015-03-01 12:44:42 +010058#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
59
60#define CONFIG_CMDLINE_TAG
61#define CONFIG_SETUP_MEMORY_TAGS
62#define CONFIG_INITRD_TAG
63#define CONFIG_REVISION_TAG
64
65#define CONFIG_SYS_CBSIZE 1024
66#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
67 + sizeof(CONFIG_SYS_PROMPT) + 16)
68
69#define CONFIG_SYS_MAXARGS 16
70
71#define CONFIG_SYS_MALLOC_LEN (2 << 20)
72
73#define CONFIG_STACKSIZE (64 << 10)
74
75#define CONFIG_BAUDRATE 115200
76#define CONFIG_BOOTARGS \
rev13@wp.pl6b330562015-07-05 12:54:23 +020077 "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
rev13@wp.pled09a552015-03-01 12:44:42 +010078#define CONFIG_BOOTCOMMAND \
79 "run bootcmd_romfs"
80
81#define CONFIG_EXTRA_ENV_SETTINGS \
82 "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
83 "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
84 "bootm 0x08044000 - 0x08042000\0"
85
86#define CONFIG_BOOTDELAY 3
87#define CONFIG_AUTOBOOT
88
89/*
90 * Command line configuration.
91 */
rev13@wp.pled09a552015-03-01 12:44:42 +010092#define CONFIG_SYS_LONGHELP
93#define CONFIG_SYS_HUSH_PARSER
rev13@wp.pled09a552015-03-01 12:44:42 +010094#define CONFIG_AUTO_COMPLETE
95#define CONFIG_CMDLINE_EDITING
96
rev13@wp.pled09a552015-03-01 12:44:42 +010097#define CONFIG_CMD_MEM
rev13@wp.pled09a552015-03-01 12:44:42 +010098#define CONFIG_CMD_TIMER
99
100#endif /* __CONFIG_H */