Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Marvell PHY drivers |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or |
| 5 | * modify it under the terms of the GNU General Public License as |
| 6 | * published by the Free Software Foundation; either version 2 of |
| 7 | * the License, or (at your option) any later version. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, |
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 12 | * GNU General Public License for more details. |
| 13 | * |
| 14 | * You should have received a copy of the GNU General Public License |
| 15 | * along with this program; if not, write to the Free Software |
| 16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 17 | * MA 02111-1307 USA |
| 18 | * |
| 19 | * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| 20 | * author Andy Fleming |
| 21 | * |
| 22 | */ |
| 23 | #include <config.h> |
| 24 | #include <common.h> |
| 25 | #include <phy.h> |
| 26 | |
| 27 | #define PHY_AUTONEGOTIATE_TIMEOUT 5000 |
| 28 | |
| 29 | /* 88E1011 PHY Status Register */ |
| 30 | #define MIIM_88E1xxx_PHY_STATUS 0x11 |
| 31 | #define MIIM_88E1xxx_PHYSTAT_SPEED 0xc000 |
| 32 | #define MIIM_88E1xxx_PHYSTAT_GBIT 0x8000 |
| 33 | #define MIIM_88E1xxx_PHYSTAT_100 0x4000 |
| 34 | #define MIIM_88E1xxx_PHYSTAT_DUPLEX 0x2000 |
| 35 | #define MIIM_88E1xxx_PHYSTAT_SPDDONE 0x0800 |
| 36 | #define MIIM_88E1xxx_PHYSTAT_LINK 0x0400 |
| 37 | |
| 38 | #define MIIM_88E1xxx_PHY_SCR 0x10 |
| 39 | #define MIIM_88E1xxx_PHY_MDI_X_AUTO 0x0060 |
| 40 | |
| 41 | /* 88E1111 PHY LED Control Register */ |
| 42 | #define MIIM_88E1111_PHY_LED_CONTROL 24 |
| 43 | #define MIIM_88E1111_PHY_LED_DIRECT 0x4100 |
| 44 | #define MIIM_88E1111_PHY_LED_COMBINE 0x411C |
| 45 | |
Zang Roy-R61911 | fa12a08 | 2011-10-27 18:52:09 +0000 | [diff] [blame] | 46 | /* 88E1111 Extended PHY Specific Control Register */ |
| 47 | #define MIIM_88E1111_PHY_EXT_CR 0x14 |
| 48 | #define MIIM_88E1111_RX_DELAY 0x80 |
| 49 | #define MIIM_88E1111_TX_DELAY 0x2 |
| 50 | |
| 51 | /* 88E1111 Extended PHY Specific Status Register */ |
| 52 | #define MIIM_88E1111_PHY_EXT_SR 0x1b |
| 53 | #define MIIM_88E1111_HWCFG_MODE_MASK 0xf |
| 54 | #define MIIM_88E1111_HWCFG_MODE_COPPER_RGMII 0xb |
| 55 | #define MIIM_88E1111_HWCFG_MODE_FIBER_RGMII 0x3 |
| 56 | #define MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK 0x4 |
| 57 | #define MIIM_88E1111_HWCFG_MODE_COPPER_RTBI 0x9 |
| 58 | #define MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO 0x8000 |
| 59 | #define MIIM_88E1111_HWCFG_FIBER_COPPER_RES 0x2000 |
| 60 | |
| 61 | #define MIIM_88E1111_COPPER 0 |
| 62 | #define MIIM_88E1111_FIBER 1 |
| 63 | |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 64 | /* 88E1118 PHY defines */ |
| 65 | #define MIIM_88E1118_PHY_PAGE 22 |
| 66 | #define MIIM_88E1118_PHY_LED_PAGE 3 |
| 67 | |
| 68 | /* 88E1121 PHY LED Control Register */ |
| 69 | #define MIIM_88E1121_PHY_LED_CTRL 16 |
| 70 | #define MIIM_88E1121_PHY_LED_PAGE 3 |
| 71 | #define MIIM_88E1121_PHY_LED_DEF 0x0030 |
| 72 | |
| 73 | /* 88E1121 PHY IRQ Enable/Status Register */ |
| 74 | #define MIIM_88E1121_PHY_IRQ_EN 18 |
| 75 | #define MIIM_88E1121_PHY_IRQ_STATUS 19 |
| 76 | |
| 77 | #define MIIM_88E1121_PHY_PAGE 22 |
| 78 | |
| 79 | /* 88E1145 Extended PHY Specific Control Register */ |
| 80 | #define MIIM_88E1145_PHY_EXT_CR 20 |
| 81 | #define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 |
| 82 | #define MIIM_M88E1145_RGMII_TX_DELAY 0x0002 |
| 83 | |
| 84 | #define MIIM_88E1145_PHY_LED_CONTROL 24 |
| 85 | #define MIIM_88E1145_PHY_LED_DIRECT 0x4100 |
| 86 | |
| 87 | #define MIIM_88E1145_PHY_PAGE 29 |
| 88 | #define MIIM_88E1145_PHY_CAL_OV 30 |
| 89 | |
| 90 | #define MIIM_88E1149_PHY_PAGE 29 |
| 91 | |
| 92 | /* Marvell 88E1011S */ |
| 93 | static int m88e1011s_config(struct phy_device *phydev) |
| 94 | { |
| 95 | /* Reset and configure the PHY */ |
| 96 | phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| 97 | |
| 98 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); |
| 99 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c); |
| 100 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); |
| 101 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0); |
| 102 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); |
| 103 | |
| 104 | phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| 105 | |
| 106 | genphy_config_aneg(phydev); |
| 107 | |
| 108 | return 0; |
| 109 | } |
| 110 | |
| 111 | /* Parse the 88E1011's status register for speed and duplex |
| 112 | * information |
| 113 | */ |
| 114 | static uint m88e1xxx_parse_status(struct phy_device *phydev) |
| 115 | { |
| 116 | unsigned int speed; |
| 117 | unsigned int mii_reg; |
| 118 | |
| 119 | mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_STATUS); |
| 120 | |
| 121 | if ((mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) && |
| 122 | !(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) { |
| 123 | int i = 0; |
| 124 | |
| 125 | puts("Waiting for PHY realtime link"); |
| 126 | while (!(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) { |
| 127 | /* Timeout reached ? */ |
| 128 | if (i > PHY_AUTONEGOTIATE_TIMEOUT) { |
| 129 | puts(" TIMEOUT !\n"); |
| 130 | phydev->link = 0; |
| 131 | break; |
| 132 | } |
| 133 | |
| 134 | if ((i++ % 1000) == 0) |
| 135 | putc('.'); |
| 136 | udelay(1000); |
| 137 | mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, |
| 138 | MIIM_88E1xxx_PHY_STATUS); |
| 139 | } |
| 140 | puts(" done\n"); |
| 141 | udelay(500000); /* another 500 ms (results in faster booting) */ |
| 142 | } else { |
| 143 | if (mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) |
| 144 | phydev->link = 1; |
| 145 | else |
| 146 | phydev->link = 0; |
| 147 | } |
| 148 | |
| 149 | if (mii_reg & MIIM_88E1xxx_PHYSTAT_DUPLEX) |
| 150 | phydev->duplex = DUPLEX_FULL; |
| 151 | else |
| 152 | phydev->duplex = DUPLEX_HALF; |
| 153 | |
| 154 | speed = mii_reg & MIIM_88E1xxx_PHYSTAT_SPEED; |
| 155 | |
| 156 | switch (speed) { |
| 157 | case MIIM_88E1xxx_PHYSTAT_GBIT: |
| 158 | phydev->speed = SPEED_1000; |
| 159 | break; |
| 160 | case MIIM_88E1xxx_PHYSTAT_100: |
| 161 | phydev->speed = SPEED_100; |
| 162 | break; |
| 163 | default: |
| 164 | phydev->speed = SPEED_10; |
| 165 | break; |
| 166 | } |
| 167 | |
| 168 | return 0; |
| 169 | } |
| 170 | |
| 171 | static int m88e1011s_startup(struct phy_device *phydev) |
| 172 | { |
| 173 | genphy_update_link(phydev); |
| 174 | m88e1xxx_parse_status(phydev); |
| 175 | |
| 176 | return 0; |
| 177 | } |
| 178 | |
| 179 | /* Marvell 88E1111S */ |
| 180 | static int m88e1111s_config(struct phy_device *phydev) |
| 181 | { |
| 182 | int reg; |
Zang Roy-R61911 | fa12a08 | 2011-10-27 18:52:09 +0000 | [diff] [blame] | 183 | int timeout; |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 184 | |
| 185 | if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || |
| 186 | (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || |
| 187 | (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || |
| 188 | (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { |
Zang Roy-R61911 | fa12a08 | 2011-10-27 18:52:09 +0000 | [diff] [blame] | 189 | reg = phy_read(phydev, |
| 190 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR); |
| 191 | if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || |
| 192 | (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)) { |
| 193 | reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY); |
| 194 | } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { |
| 195 | reg &= ~MIIM_88E1111_TX_DELAY; |
| 196 | reg |= MIIM_88E1111_RX_DELAY; |
| 197 | } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
| 198 | reg &= ~MIIM_88E1111_RX_DELAY; |
| 199 | reg |= MIIM_88E1111_TX_DELAY; |
| 200 | } |
| 201 | |
| 202 | phy_write(phydev, |
| 203 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR, reg); |
| 204 | |
| 205 | reg = phy_read(phydev, |
| 206 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR); |
| 207 | |
| 208 | reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK); |
| 209 | |
| 210 | if (reg & MIIM_88E1111_HWCFG_FIBER_COPPER_RES) |
| 211 | reg |= MIIM_88E1111_HWCFG_MODE_FIBER_RGMII; |
| 212 | else |
| 213 | reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RGMII; |
| 214 | |
| 215 | phy_write(phydev, |
| 216 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR, reg); |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 217 | } |
| 218 | |
Zang Roy-R61911 | fa12a08 | 2011-10-27 18:52:09 +0000 | [diff] [blame] | 219 | if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { |
| 220 | reg = phy_read(phydev, |
| 221 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR); |
| 222 | |
| 223 | reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK); |
| 224 | reg |= MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK; |
| 225 | reg |= MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; |
| 226 | |
| 227 | phy_write(phydev, MDIO_DEVAD_NONE, |
| 228 | MIIM_88E1111_PHY_EXT_SR, reg); |
| 229 | } |
| 230 | |
| 231 | if (phydev->interface == PHY_INTERFACE_MODE_RTBI) { |
| 232 | reg = phy_read(phydev, |
| 233 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR); |
| 234 | reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY); |
| 235 | phy_write(phydev, |
| 236 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR, reg); |
| 237 | |
| 238 | reg = phy_read(phydev, MDIO_DEVAD_NONE, |
| 239 | MIIM_88E1111_PHY_EXT_SR); |
| 240 | reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK | |
| 241 | MIIM_88E1111_HWCFG_FIBER_COPPER_RES); |
| 242 | reg |= 0x7 | MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; |
| 243 | phy_write(phydev, MDIO_DEVAD_NONE, |
| 244 | MIIM_88E1111_PHY_EXT_SR, reg); |
| 245 | |
| 246 | /* soft reset */ |
| 247 | timeout = 1000; |
| 248 | phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| 249 | udelay(1000); |
| 250 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| 251 | while ((reg & BMCR_RESET) && --timeout) { |
| 252 | udelay(1000); |
| 253 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| 254 | } |
| 255 | if (!timeout) |
| 256 | printf("%s: phy soft reset timeout\n", __func__); |
| 257 | |
| 258 | reg = phy_read(phydev, MDIO_DEVAD_NONE, |
| 259 | MIIM_88E1111_PHY_EXT_SR); |
| 260 | reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK | |
| 261 | MIIM_88E1111_HWCFG_FIBER_COPPER_RES); |
| 262 | reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RTBI | |
| 263 | MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; |
| 264 | phy_write(phydev, MDIO_DEVAD_NONE, |
| 265 | MIIM_88E1111_PHY_EXT_SR, reg); |
| 266 | } |
| 267 | |
| 268 | /* soft reset */ |
| 269 | timeout = 1000; |
| 270 | phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| 271 | udelay(1000); |
| 272 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| 273 | while ((reg & BMCR_RESET) && --timeout) { |
| 274 | udelay(1000); |
| 275 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| 276 | } |
| 277 | if (!timeout) |
| 278 | printf("%s: phy soft reset timeout\n", __func__); |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 279 | |
| 280 | genphy_config_aneg(phydev); |
| 281 | |
| 282 | phy_reset(phydev); |
| 283 | |
| 284 | return 0; |
| 285 | } |
| 286 | |
| 287 | /* Marvell 88E1118 */ |
| 288 | static int m88e1118_config(struct phy_device *phydev) |
| 289 | { |
| 290 | /* Change Page Number */ |
| 291 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0002); |
| 292 | /* Delay RGMII TX and RX */ |
| 293 | phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x1070); |
| 294 | /* Change Page Number */ |
| 295 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0003); |
| 296 | /* Adjust LED control */ |
| 297 | phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x021e); |
| 298 | /* Change Page Number */ |
| 299 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); |
| 300 | |
| 301 | genphy_config_aneg(phydev); |
| 302 | |
| 303 | phy_reset(phydev); |
| 304 | |
| 305 | return 0; |
| 306 | } |
| 307 | |
| 308 | static int m88e1118_startup(struct phy_device *phydev) |
| 309 | { |
| 310 | /* Change Page Number */ |
| 311 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); |
| 312 | |
| 313 | genphy_update_link(phydev); |
| 314 | m88e1xxx_parse_status(phydev); |
| 315 | |
| 316 | return 0; |
| 317 | } |
| 318 | |
| 319 | /* Marvell 88E1121R */ |
| 320 | static int m88e1121_config(struct phy_device *phydev) |
| 321 | { |
| 322 | int pg; |
| 323 | |
| 324 | /* Configure the PHY */ |
| 325 | genphy_config_aneg(phydev); |
| 326 | |
| 327 | /* Switch the page to access the led register */ |
| 328 | pg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE); |
| 329 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, |
| 330 | MIIM_88E1121_PHY_LED_PAGE); |
| 331 | /* Configure leds */ |
| 332 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_LED_CTRL, |
| 333 | MIIM_88E1121_PHY_LED_DEF); |
| 334 | /* Restore the page pointer */ |
| 335 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, pg); |
| 336 | |
| 337 | /* Disable IRQs and de-assert interrupt */ |
| 338 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_EN, 0); |
| 339 | phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_STATUS); |
| 340 | |
| 341 | return 0; |
| 342 | } |
| 343 | |
| 344 | /* Marvell 88E1145 */ |
| 345 | static int m88e1145_config(struct phy_device *phydev) |
| 346 | { |
| 347 | int reg; |
| 348 | |
| 349 | /* Errata E0, E1 */ |
| 350 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x001b); |
| 351 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0x418f); |
| 352 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x0016); |
| 353 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0xa2da); |
| 354 | |
| 355 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_SCR, |
| 356 | MIIM_88E1xxx_PHY_MDI_X_AUTO); |
| 357 | |
| 358 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR); |
| 359 | if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) |
| 360 | reg |= MIIM_M88E1145_RGMII_RX_DELAY | |
| 361 | MIIM_M88E1145_RGMII_TX_DELAY; |
| 362 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR, reg); |
| 363 | |
| 364 | genphy_config_aneg(phydev); |
| 365 | |
| 366 | phy_reset(phydev); |
| 367 | |
| 368 | return 0; |
| 369 | } |
| 370 | |
| 371 | static int m88e1145_startup(struct phy_device *phydev) |
| 372 | { |
| 373 | genphy_update_link(phydev); |
| 374 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_LED_CONTROL, |
| 375 | MIIM_88E1145_PHY_LED_DIRECT); |
| 376 | m88e1xxx_parse_status(phydev); |
| 377 | |
| 378 | return 0; |
| 379 | } |
| 380 | |
| 381 | /* Marvell 88E1149S */ |
| 382 | static int m88e1149_config(struct phy_device *phydev) |
| 383 | { |
| 384 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x1f); |
| 385 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c); |
| 386 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x5); |
| 387 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x0); |
| 388 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); |
| 389 | |
| 390 | genphy_config_aneg(phydev); |
| 391 | |
| 392 | phy_reset(phydev); |
| 393 | |
| 394 | return 0; |
| 395 | } |
| 396 | |
| 397 | |
| 398 | static struct phy_driver M88E1011S_driver = { |
| 399 | .name = "Marvell 88E1011S", |
| 400 | .uid = 0x1410c60, |
| 401 | .mask = 0xffffff0, |
| 402 | .features = PHY_GBIT_FEATURES, |
| 403 | .config = &m88e1011s_config, |
| 404 | .startup = &m88e1011s_startup, |
| 405 | .shutdown = &genphy_shutdown, |
| 406 | }; |
| 407 | |
| 408 | static struct phy_driver M88E1111S_driver = { |
| 409 | .name = "Marvell 88E1111S", |
| 410 | .uid = 0x1410cc0, |
| 411 | .mask = 0xffffff0, |
| 412 | .features = PHY_GBIT_FEATURES, |
| 413 | .config = &m88e1111s_config, |
| 414 | .startup = &m88e1011s_startup, |
| 415 | .shutdown = &genphy_shutdown, |
| 416 | }; |
| 417 | |
| 418 | static struct phy_driver M88E1118_driver = { |
| 419 | .name = "Marvell 88E1118", |
| 420 | .uid = 0x1410e10, |
| 421 | .mask = 0xffffff0, |
| 422 | .features = PHY_GBIT_FEATURES, |
| 423 | .config = &m88e1118_config, |
| 424 | .startup = &m88e1118_startup, |
| 425 | .shutdown = &genphy_shutdown, |
| 426 | }; |
| 427 | |
| 428 | static struct phy_driver M88E1121R_driver = { |
| 429 | .name = "Marvell 88E1121R", |
| 430 | .uid = 0x1410cb0, |
| 431 | .mask = 0xffffff0, |
| 432 | .features = PHY_GBIT_FEATURES, |
| 433 | .config = &m88e1121_config, |
| 434 | .startup = &genphy_startup, |
| 435 | .shutdown = &genphy_shutdown, |
| 436 | }; |
| 437 | |
| 438 | static struct phy_driver M88E1145_driver = { |
| 439 | .name = "Marvell 88E1145", |
| 440 | .uid = 0x1410cd0, |
| 441 | .mask = 0xffffff0, |
| 442 | .features = PHY_GBIT_FEATURES, |
| 443 | .config = &m88e1145_config, |
| 444 | .startup = &m88e1145_startup, |
| 445 | .shutdown = &genphy_shutdown, |
| 446 | }; |
| 447 | |
| 448 | static struct phy_driver M88E1149S_driver = { |
| 449 | .name = "Marvell 88E1149S", |
| 450 | .uid = 0x1410ca0, |
| 451 | .mask = 0xffffff0, |
| 452 | .features = PHY_GBIT_FEATURES, |
| 453 | .config = &m88e1149_config, |
| 454 | .startup = &m88e1011s_startup, |
| 455 | .shutdown = &genphy_shutdown, |
| 456 | }; |
| 457 | |
| 458 | int phy_marvell_init(void) |
| 459 | { |
| 460 | phy_register(&M88E1149S_driver); |
| 461 | phy_register(&M88E1145_driver); |
| 462 | phy_register(&M88E1121R_driver); |
| 463 | phy_register(&M88E1118_driver); |
| 464 | phy_register(&M88E1111S_driver); |
| 465 | phy_register(&M88E1011S_driver); |
| 466 | |
| 467 | return 0; |
| 468 | } |