blob: d3eab0711c3ddb076123a27c35198538ff096725 [file] [log] [blame]
Hao Zhang26459482014-10-22 17:47:59 +03001/*
2 * Keystone2: DDR3 test commands
3 *
4 * (C) Copyright 2012-2014
5 * Texas Instruments Incorporated, <www.ti.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10#include <asm/arch/hardware.h>
11#include <asm/arch/ddr3.h>
12#include <common.h>
13#include <command.h>
14
15DECLARE_GLOBAL_DATA_PTR;
16
17#define DDR_MIN_ADDR CONFIG_SYS_SDRAM_BASE
Tom Rini01abae42017-04-06 20:42:18 -040018#define STACKSIZE (512 << 10) /* 512 KiB */
Hao Zhang26459482014-10-22 17:47:59 +030019
20#define DDR_REMAP_ADDR 0x80000000
21#define ECC_START_ADDR1 ((DDR_MIN_ADDR - DDR_REMAP_ADDR) >> 17)
22
23#define ECC_END_ADDR1 (((gd->start_addr_sp - DDR_REMAP_ADDR - \
Tom Rini01abae42017-04-06 20:42:18 -040024 STACKSIZE) >> 17) - 2)
Hao Zhang26459482014-10-22 17:47:59 +030025
26#define DDR_TEST_BURST_SIZE 1024
27
28static int ddr_memory_test(u32 start_address, u32 end_address, int quick)
29{
30 u32 index_start, value, index;
31
32 index_start = start_address;
33
34 while (1) {
35 /* Write a pattern */
36 for (index = index_start;
37 index < index_start + DDR_TEST_BURST_SIZE;
38 index += 4)
39 __raw_writel(index, index);
40
41 /* Read and check the pattern */
42 for (index = index_start;
43 index < index_start + DDR_TEST_BURST_SIZE;
44 index += 4) {
45 value = __raw_readl(index);
46 if (value != index) {
47 printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
48 index, value, __raw_readl(index));
49
50 return -1;
51 }
52 }
53
54 index_start += DDR_TEST_BURST_SIZE;
55 if (index_start >= end_address)
56 break;
57
58 if (quick)
59 continue;
60
61 /* Write a pattern for complementary values */
62 for (index = index_start;
63 index < index_start + DDR_TEST_BURST_SIZE;
64 index += 4)
65 __raw_writel((u32)~index, index);
66
67 /* Read and check the pattern */
68 for (index = index_start;
69 index < index_start + DDR_TEST_BURST_SIZE;
70 index += 4) {
71 value = __raw_readl(index);
72 if (value != ~index) {
73 printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
74 index, value, __raw_readl(index));
75
76 return -1;
77 }
78 }
79
80 index_start += DDR_TEST_BURST_SIZE;
81 if (index_start >= end_address)
82 break;
83
84 /* Write a pattern */
85 for (index = index_start;
86 index < index_start + DDR_TEST_BURST_SIZE;
87 index += 2)
88 __raw_writew((u16)index, index);
89
90 /* Read and check the pattern */
91 for (index = index_start;
92 index < index_start + DDR_TEST_BURST_SIZE;
93 index += 2) {
94 value = __raw_readw(index);
95 if (value != (u16)index) {
96 printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
97 index, value, __raw_readw(index));
98
99 return -1;
100 }
101 }
102
103 index_start += DDR_TEST_BURST_SIZE;
104 if (index_start >= end_address)
105 break;
106
107 /* Write a pattern */
108 for (index = index_start;
109 index < index_start + DDR_TEST_BURST_SIZE;
110 index += 1)
111 __raw_writeb((u8)index, index);
112
113 /* Read and check the pattern */
114 for (index = index_start;
115 index < index_start + DDR_TEST_BURST_SIZE;
116 index += 1) {
117 value = __raw_readb(index);
118 if (value != (u8)index) {
119 printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
120 index, value, __raw_readb(index));
121
122 return -1;
123 }
124 }
125
126 index_start += DDR_TEST_BURST_SIZE;
127 if (index_start >= end_address)
128 break;
129 }
130
131 puts("ddr memory test PASSED!\n");
132 return 0;
133}
134
135static int ddr_memory_compare(u32 address1, u32 address2, u32 size)
136{
137 u32 index, value, index2, value2;
138
139 for (index = address1, index2 = address2;
140 index < address1 + size;
141 index += 4, index2 += 4) {
142 value = __raw_readl(index);
143 value2 = __raw_readl(index2);
144
145 if (value != value2) {
146 printf("ddr_memory_test: Compare failed at address = 0x%x value = 0x%x, address2 = 0x%x value2 = 0x%x\n",
147 index, value, index2, value2);
148
149 return -1;
150 }
151 }
152
153 puts("ddr memory compare PASSED!\n");
154 return 0;
155}
156
157static int ddr_memory_ecc_err(u32 base, u32 address, u32 ecc_err)
158{
159 u32 value1, value2, value3;
160
161 puts("Disabling DDR ECC ...\n");
162 ddr3_disable_ecc(base);
163
164 value1 = __raw_readl(address);
165 value2 = value1 ^ ecc_err;
166 __raw_writel(value2, address);
167
168 value3 = __raw_readl(address);
169 printf("ECC err test, addr 0x%x, read data 0x%x, wrote data 0x%x, err pattern: 0x%x, read after write data 0x%x\n",
170 address, value1, value2, ecc_err, value3);
171
172 __raw_writel(ECC_START_ADDR1 | (ECC_END_ADDR1 << 16),
173 base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
174
175 puts("Enabling DDR ECC ...\n");
176 ddr3_enable_ecc(base, 1);
177
178 value1 = __raw_readl(address);
179 printf("ECC err test, addr 0x%x, read data 0x%x\n", address, value1);
180
181 ddr3_check_ecc_int(base);
182 return 0;
183}
184
185static int do_ddr_test(cmd_tbl_t *cmdtp,
186 int flag, int argc, char * const argv[])
187{
188 u32 start_addr, end_addr, size, ecc_err;
189
190 if ((argc == 4) && (strncmp(argv[1], "ecc_err", 8) == 0)) {
191 if (!ddr3_ecc_support_rmw(KS2_DDR3A_EMIF_CTRL_BASE)) {
192 puts("ECC RMW isn't supported for this SOC\n");
193 return 1;
194 }
195
196 start_addr = simple_strtoul(argv[2], NULL, 16);
197 ecc_err = simple_strtoul(argv[3], NULL, 16);
198
199 if ((start_addr < CONFIG_SYS_SDRAM_BASE) ||
200 (start_addr > (CONFIG_SYS_SDRAM_BASE +
201 CONFIG_MAX_RAM_BANK_SIZE - 1))) {
202 puts("Invalid address!\n");
203 return cmd_usage(cmdtp);
204 }
205
206 ddr_memory_ecc_err(KS2_DDR3A_EMIF_CTRL_BASE,
207 start_addr, ecc_err);
208 return 0;
209 }
210
211 if (!(((argc == 4) && (strncmp(argv[1], "test", 5) == 0)) ||
212 ((argc == 5) && (strncmp(argv[1], "compare", 8) == 0))))
213 return cmd_usage(cmdtp);
214
215 start_addr = simple_strtoul(argv[2], NULL, 16);
216 end_addr = simple_strtoul(argv[3], NULL, 16);
217
218 if ((start_addr < CONFIG_SYS_SDRAM_BASE) ||
219 (start_addr > (CONFIG_SYS_SDRAM_BASE +
220 CONFIG_MAX_RAM_BANK_SIZE - 1)) ||
221 (end_addr < CONFIG_SYS_SDRAM_BASE) ||
222 (end_addr > (CONFIG_SYS_SDRAM_BASE +
223 CONFIG_MAX_RAM_BANK_SIZE - 1)) || (start_addr >= end_addr)) {
224 puts("Invalid start or end address!\n");
225 return cmd_usage(cmdtp);
226 }
227
228 puts("Please wait ...\n");
229 if (argc == 5) {
230 size = simple_strtoul(argv[4], NULL, 16);
231 ddr_memory_compare(start_addr, end_addr, size);
232 } else {
233 ddr_memory_test(start_addr, end_addr, 0);
234 }
235
236 return 0;
237}
238
239U_BOOT_CMD(ddr, 5, 1, do_ddr_test,
240 "DDR3 test",
241 "test <start_addr in hex> <end_addr in hex> - test DDR from start\n"
242 " address to end address\n"
243 "ddr compare <start_addr in hex> <end_addr in hex> <size in hex> -\n"
244 " compare DDR data of (size) bytes from start address to end\n"
245 " address\n"
246 "ddr ecc_err <addr in hex> <bit_err in hex> - generate bit errors\n"
247 " in DDR data at <addr>, the command will read a 32-bit data\n"
248 " from <addr>, and write (data ^ bit_err) back to <addr>\n"
249);