blob: 9926285675bb361123416c15ccca52f8ed534db0 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Marek Vasutf91c09a2014-10-24 23:39:07 +02002/*
3 * Novena SPL
4 *
5 * Copyright (C) 2014 Marek Vasut <marex@denx.de>
Marek Vasutf91c09a2014-10-24 23:39:07 +02006 */
7
8#include <common.h>
Simon Glassd96c2602019-12-28 10:44:58 -07009#include <clock_legacy.h>
Simon Glass52559322019-11-14 12:57:46 -070010#include <init.h>
Marek Vasutf91c09a2014-10-24 23:39:07 +020011#include <asm/io.h>
12#include <asm/arch/clock.h>
13#include <asm/arch/iomux.h>
14#include <asm/arch/mx6-ddr.h>
15#include <asm/arch/mx6-pins.h>
16#include <asm/arch/sys_proto.h>
17#include <asm/gpio.h>
Stefano Babic552a8482017-06-29 10:16:06 +020018#include <asm/mach-imx/boot_mode.h>
19#include <asm/mach-imx/iomux-v3.h>
20#include <asm/mach-imx/mxc_i2c.h>
Fabio Estevam7d29acd2014-11-14 09:37:01 -020021#include <asm/arch/crm_regs.h>
Marek Vasutf91c09a2014-10-24 23:39:07 +020022#include <i2c.h>
23#include <mmc.h>
Yangbo Lue37ac712019-06-21 11:42:28 +080024#include <fsl_esdhc_imx.h>
Marek Vasutf91c09a2014-10-24 23:39:07 +020025#include <spl.h>
Simon Glassc05ed002020-05-10 11:40:11 -060026#include <linux/delay.h>
Marek Vasutf91c09a2014-10-24 23:39:07 +020027
28#include <asm/arch/mx6-ddr.h>
29
Marek Vasutd59d7b92014-12-16 14:09:21 +010030#include "novena.h"
31
Marek Vasutf91c09a2014-10-24 23:39:07 +020032#define UART_PAD_CTRL \
33 (PAD_CTL_PKE | PAD_CTL_PUE | \
34 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
35 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
36
37#define USDHC_PAD_CTRL \
38 (PAD_CTL_PKE | PAD_CTL_PUE | \
39 PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
40 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
41
42#define ENET_PAD_CTRL \
43 (PAD_CTL_PKE | PAD_CTL_PUE | \
44 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
45 PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
46
Nikolay Dimitrovb99ed272014-10-12 13:47:51 +030047#define ENET_PHY_CFG_PAD_CTRL \
48 (PAD_CTL_PKE | PAD_CTL_PUE | \
49 PAD_CTL_PUS_22K_UP | PAD_CTL_HYS)
50
Marek Vasutf91c09a2014-10-24 23:39:07 +020051#define RGMII_PAD_CTRL \
52 (PAD_CTL_PKE | PAD_CTL_PUE | \
53 PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
54
55#define SPI_PAD_CTRL \
56 (PAD_CTL_HYS | \
57 PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
58 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
59
60#define I2C_PAD_CTRL \
61 (PAD_CTL_PKE | PAD_CTL_PUE | \
62 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
63 PAD_CTL_DSE_240ohm | PAD_CTL_HYS | \
64 PAD_CTL_ODE)
65
66#define BUTTON_PAD_CTRL \
67 (PAD_CTL_PKE | PAD_CTL_PUE | \
68 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
69 PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
70
71#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
72
Marek Vasutf91c09a2014-10-24 23:39:07 +020073/*
74 * Audio
75 */
76static iomux_v3_cfg_t audio_pads[] = {
77 /* AUD_PWRON */
78 MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL),
79};
80
81static void novena_spl_setup_iomux_audio(void)
82{
83 imx_iomux_v3_setup_multiple_pads(audio_pads, ARRAY_SIZE(audio_pads));
84 gpio_direction_output(NOVENA_AUDIO_PWRON, 1);
85}
86
87/*
88 * ENET
89 */
90static iomux_v3_cfg_t enet_pads1[] = {
91 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
92 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
93 MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(RGMII_PAD_CTRL),
94 MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
95 MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
96 MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
97 MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
98 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL),
99 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
Nikolay Dimitrovb99ed272014-10-12 13:47:51 +0300100
101 /* pin 35, PHY_AD2 */
102 MX6_PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
103 /* pin 32, MODE0 */
104 MX6_PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
105 /* pin 31, MODE1 */
106 MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
107 /* pin 28, MODE2 */
108 MX6_PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
109 /* pin 27, MODE3 */
110 MX6_PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
111 /* pin 33, CLK125_EN */
112 MX6_PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
113
Marek Vasutf91c09a2014-10-24 23:39:07 +0200114 /* pin 42 PHY nRST */
115 MX6_PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL),
116};
117
118static iomux_v3_cfg_t enet_pads2[] = {
119 MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(RGMII_PAD_CTRL),
120 MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
121 MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
122 MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
123 MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
124 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL),
125};
126
127static void novena_spl_setup_iomux_enet(void)
128{
129 imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
130
Nikolay Dimitrovb99ed272014-10-12 13:47:51 +0300131 /* Assert Ethernet PHY nRST */
Marek Vasutf91c09a2014-10-24 23:39:07 +0200132 gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
Marek Vasutf91c09a2014-10-24 23:39:07 +0200133
Nikolay Dimitrovb99ed272014-10-12 13:47:51 +0300134 /*
135 * Use imx6 internal pull-ups to drive PHY mode pins during PHY reset
136 * de-assertion. The intention is to use weak signal drivers (pull-ups)
137 * to prevent the conflict between PHY pins becoming outputs after
138 * reset and imx6 still driving the pins. The issue is described in PHY
139 * datasheet, p.14
140 */
141 gpio_direction_input(IMX_GPIO_NR(6, 30)); /* PHY_AD2 = 1 */
142 gpio_direction_input(IMX_GPIO_NR(6, 25)); /* MODE0 = 1 */
143 gpio_direction_input(IMX_GPIO_NR(6, 27)); /* MODE1 = 1 */
144 gpio_direction_input(IMX_GPIO_NR(6, 28)); /* MODE2 = 1 */
145 gpio_direction_input(IMX_GPIO_NR(6, 29)); /* MODE3 = 1 */
146 gpio_direction_input(IMX_GPIO_NR(6, 24)); /* CLK125_EN = 1 */
147
148 /* Following reset timing (p.53, fig.8 from the PHY datasheet) */
149 mdelay(10);
150
151 /* De-assert Ethernet PHY nRST */
152 gpio_set_value(IMX_GPIO_NR(3, 23), 1);
153
154 /* PHY is now configured, connect FEC to the pads */
Marek Vasutf91c09a2014-10-24 23:39:07 +0200155 imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
Nikolay Dimitrovb99ed272014-10-12 13:47:51 +0300156
157 /*
158 * PHY datasheet recommends on p.53 to wait at least 100us after reset
159 * before using MII, so we enforce the delay here
160 */
161 udelay(100);
Marek Vasutf91c09a2014-10-24 23:39:07 +0200162}
163
164/*
165 * FPGA
166 */
167static iomux_v3_cfg_t fpga_pads[] = {
168 /* FPGA_RESET_N */
169 MX6_PAD_DISP0_DAT13__GPIO5_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
170};
171
172static void novena_spl_setup_iomux_fpga(void)
173{
174 imx_iomux_v3_setup_multiple_pads(fpga_pads, ARRAY_SIZE(fpga_pads));
175 gpio_direction_output(NOVENA_FPGA_RESET_N_GPIO, 0);
176}
177
178/*
179 * GPIO Button
180 */
181static iomux_v3_cfg_t button_pads[] = {
182 /* Debug */
183 MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
184};
185
186static void novena_spl_setup_iomux_buttons(void)
187{
188 imx_iomux_v3_setup_multiple_pads(button_pads, ARRAY_SIZE(button_pads));
189}
190
191/*
192 * I2C
193 */
194/*
195 * I2C1:
196 * 0x1d ... MMA7455L
197 * 0x30 ... SO-DIMM temp sensor
198 * 0x44 ... STMPE610
199 * 0x50 ... SO-DIMM ID
200 */
201struct i2c_pads_info i2c_pad_info0 = {
202 .scl = {
203 .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
204 .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
205 .gp = IMX_GPIO_NR(3, 21)
206 },
207 .sda = {
208 .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
209 .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
210 .gp = IMX_GPIO_NR(3, 28)
211 }
212};
213
214/*
215 * I2C2:
216 * 0x08 ... PMIC
217 * 0x3a ... HDMI DCC
218 * 0x50 ... HDMI DCC
219 */
220static struct i2c_pads_info i2c_pad_info1 = {
221 .scl = {
222 .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
223 .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
224 .gp = IMX_GPIO_NR(2, 30)
225 },
226 .sda = {
227 .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
228 .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
229 .gp = IMX_GPIO_NR(3, 16)
230 }
231};
232
233/*
234 * I2C3:
235 * 0x11 ... ES8283
236 * 0x50 ... LCD EDID
237 * 0x56 ... EEPROM
238 */
239static struct i2c_pads_info i2c_pad_info2 = {
240 .scl = {
241 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
242 .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
243 .gp = IMX_GPIO_NR(3, 17)
244 },
245 .sda = {
246 .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
247 .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
248 .gp = IMX_GPIO_NR(3, 18)
249 }
250};
251
252static void novena_spl_setup_iomux_i2c(void)
253{
254 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
255 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
256 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
257}
258
259/*
260 * PCI express
261 */
262#ifdef CONFIG_CMD_PCI
263static iomux_v3_cfg_t pcie_pads[] = {
264 /* "Reset" pin */
265 MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
266 /* "Power on" pin */
267 MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
268 /* "Wake up" pin (input) */
269 MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
270 /* "Disable endpoint" (rfkill) pin */
271 MX6_PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL),
272};
273
274static void novena_spl_setup_iomux_pcie(void)
275{
276 imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
277
278 /* Ensure PCIe is powered down */
279 gpio_direction_output(NOVENA_PCIE_POWER_ON_GPIO, 0);
280
281 /* Put the card into reset */
282 gpio_direction_output(NOVENA_PCIE_RESET_GPIO, 0);
283
284 /* Input signal to wake system from mPCIe card */
285 gpio_direction_input(NOVENA_PCIE_WAKE_UP_GPIO);
286
287 /* Drive RFKILL high, to ensure the radio is turned on */
288 gpio_direction_output(NOVENA_PCIE_DISABLE_GPIO, 1);
289}
290#else
291static inline void novena_spl_setup_iomux_pcie(void) {}
292#endif
293
294/*
295 * SDHC
296 */
297static iomux_v3_cfg_t usdhc2_pads[] = {
298 MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
299 MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
300 MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
301 MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
302 MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
303 MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
304 MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
305 MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
306};
307
308static iomux_v3_cfg_t usdhc3_pads[] = {
309 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
310 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
311 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
312 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
313 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
314 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
315};
316
317static void novena_spl_setup_iomux_sdhc(void)
318{
319 imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
320 imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
321
322 /* Big SD write-protect and card-detect */
323 gpio_direction_input(IMX_GPIO_NR(1, 2));
324 gpio_direction_input(IMX_GPIO_NR(1, 4));
325}
326
327/*
328 * SPI
329 */
330#ifdef CONFIG_MXC_SPI
331static iomux_v3_cfg_t ecspi3_pads[] = {
332 /* SS1 */
333 MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
334 MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
335 MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
336 MX6_PAD_DISP0_DAT3__GPIO4_IO24 | MUX_PAD_CTRL(SPI_PAD_CTRL),
337 MX6_PAD_DISP0_DAT4__GPIO4_IO25 | MUX_PAD_CTRL(SPI_PAD_CTRL),
338 MX6_PAD_DISP0_DAT5__GPIO4_IO26 | MUX_PAD_CTRL(SPI_PAD_CTRL),
339 MX6_PAD_DISP0_DAT7__ECSPI3_RDY | MUX_PAD_CTRL(SPI_PAD_CTRL),
340};
341
342static void novena_spl_setup_iomux_spi(void)
343{
344 imx_iomux_v3_setup_multiple_pads(ecspi3_pads, ARRAY_SIZE(ecspi3_pads));
345 /* De-assert the nCS */
346 gpio_direction_output(MX6_PAD_DISP0_DAT3__GPIO4_IO24, 1);
347 gpio_direction_output(MX6_PAD_DISP0_DAT4__GPIO4_IO25, 1);
348 gpio_direction_output(MX6_PAD_DISP0_DAT5__GPIO4_IO26, 1);
349}
350#else
351static void novena_spl_setup_iomux_spi(void) {}
352#endif
353
354/*
355 * UART
356 */
357static iomux_v3_cfg_t const uart2_pads[] = {
358 MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
359 MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
360};
361
362static iomux_v3_cfg_t const uart3_pads[] = {
363 MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
364 MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
365};
366
367static iomux_v3_cfg_t const uart4_pads[] = {
368 MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
369 MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
370 MX6_PAD_CSI0_DAT16__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
371 MX6_PAD_CSI0_DAT17__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
372
373};
374
375static void novena_spl_setup_iomux_uart(void)
376{
377 imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
378 imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
379 imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
380}
381
382/*
383 * Video
384 */
385#ifdef CONFIG_VIDEO
386static iomux_v3_cfg_t hdmi_pads[] = {
387 /* "Ghost HPD" pin */
388 MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
Marek Vasut331ae842014-12-16 14:09:23 +0100389
390 /* LCD_PWR_CTL */
391 MX6_PAD_CSI0_DAT10__GPIO5_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
392 /* LCD_BL_ON */
393 MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
394 /* GPIO_PWM1 */
395 MX6_PAD_DISP0_DAT8__GPIO4_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
Marek Vasutf91c09a2014-10-24 23:39:07 +0200396};
397
398static void novena_spl_setup_iomux_video(void)
399{
400 imx_iomux_v3_setup_multiple_pads(hdmi_pads, ARRAY_SIZE(hdmi_pads));
401 gpio_direction_input(NOVENA_HDMI_GHOST_HPD);
402}
403#else
404static inline void novena_spl_setup_iomux_video(void) {}
405#endif
406
407/*
408 * SPL boots from uSDHC card
409 */
Yangbo Lue37ac712019-06-21 11:42:28 +0800410#ifdef CONFIG_FSL_ESDHC_IMX
Marek Vasutf91c09a2014-10-24 23:39:07 +0200411static struct fsl_esdhc_cfg usdhc_cfg = {
412 USDHC3_BASE_ADDR, 0, 4
413};
414
415int board_mmc_getcd(struct mmc *mmc)
416{
417 /* There is no CD for a microSD card, assume always present. */
418 return 1;
419}
420
421int board_mmc_init(bd_t *bis)
422{
423 usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
424 return fsl_esdhc_initialize(bis, &usdhc_cfg);
425}
426#endif
427
428/* Configure MX6Q/DUAL mmdc DDR io registers */
429static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = {
430 /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
431 .dram_sdclk_0 = 0x00020038,
432 .dram_sdclk_1 = 0x00020038,
433 .dram_cas = 0x00000038,
434 .dram_ras = 0x00000038,
435 .dram_reset = 0x00000038,
436 /* SDCKE[0:1]: 100k pull-up */
Marek Vasut89d48592015-12-16 15:40:07 +0100437 .dram_sdcke0 = 0x00000038,
438 .dram_sdcke1 = 0x00000038,
Marek Vasutf91c09a2014-10-24 23:39:07 +0200439 /* SDBA2: pull-up disabled */
440 .dram_sdba2 = 0x00000000,
441 /* SDODT[0:1]: 100k pull-up, 40 ohm */
442 .dram_sdodt0 = 0x00000038,
443 .dram_sdodt1 = 0x00000038,
444 /* SDQS[0:7]: Differential input, 40 ohm */
445 .dram_sdqs0 = 0x00000038,
446 .dram_sdqs1 = 0x00000038,
447 .dram_sdqs2 = 0x00000038,
448 .dram_sdqs3 = 0x00000038,
449 .dram_sdqs4 = 0x00000038,
450 .dram_sdqs5 = 0x00000038,
451 .dram_sdqs6 = 0x00000038,
452 .dram_sdqs7 = 0x00000038,
453
454 /* DQM[0:7]: Differential input, 40 ohm */
455 .dram_dqm0 = 0x00000038,
456 .dram_dqm1 = 0x00000038,
457 .dram_dqm2 = 0x00000038,
458 .dram_dqm3 = 0x00000038,
459 .dram_dqm4 = 0x00000038,
460 .dram_dqm5 = 0x00000038,
461 .dram_dqm6 = 0x00000038,
462 .dram_dqm7 = 0x00000038,
463};
464
465/* Configure MX6Q/DUAL mmdc GRP io registers */
466static struct mx6dq_iomux_grp_regs novena_grp_ioregs = {
467 /* DDR3 */
468 .grp_ddr_type = 0x000c0000,
469 .grp_ddrmode_ctl = 0x00020000,
470 /* Disable DDR pullups */
471 .grp_ddrpke = 0x00000000,
472 /* ADDR[00:16], SDBA[0:1]: 40 ohm */
473 .grp_addds = 0x00000038,
474 /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
475 .grp_ctlds = 0x00000038,
476 /* DATA[00:63]: Differential input, 40 ohm */
477 .grp_ddrmode = 0x00020000,
478 .grp_b0ds = 0x00000038,
479 .grp_b1ds = 0x00000038,
480 .grp_b2ds = 0x00000038,
481 .grp_b3ds = 0x00000038,
482 .grp_b4ds = 0x00000038,
483 .grp_b5ds = 0x00000038,
484 .grp_b6ds = 0x00000038,
485 .grp_b7ds = 0x00000038,
486};
487
488static struct mx6_mmdc_calibration novena_mmdc_calib = {
489 /* write leveling calibration determine */
490 .p0_mpwldectrl0 = 0x00420048,
491 .p0_mpwldectrl1 = 0x006f0059,
492 .p1_mpwldectrl0 = 0x005a0104,
493 .p1_mpwldectrl1 = 0x01070113,
494 /* Read DQS Gating calibration */
495 .p0_mpdgctrl0 = 0x437c040b,
496 .p0_mpdgctrl1 = 0x0413040e,
497 .p1_mpdgctrl0 = 0x444f0446,
498 .p1_mpdgctrl1 = 0x044d0422,
499 /* Read Calibration: DQS delay relative to DQ read access */
500 .p0_mprddlctl = 0x4c424249,
501 .p1_mprddlctl = 0x4e48414f,
502 /* Write Calibration: DQ/DM delay relative to DQS write access */
503 .p0_mpwrdlctl = 0x42414641,
504 .p1_mpwrdlctl = 0x46374b43,
505};
506
507static struct mx6_ddr_sysinfo novena_ddr_info = {
508 /* Width of data bus: 0=16, 1=32, 2=64 */
509 .dsize = 2,
510 /* Config for full 4GB range so that get_mem_size() works */
511 .cs_density = 32, /* 32Gb per CS */
512 /* Single chip select */
513 .ncs = 1,
514 .cs1_mirror = 0,
Marek Vasut89d48592015-12-16 15:40:07 +0100515 .rtt_wr = 0, /* RTT_Wr = RZQ/4 */
516 .rtt_nom = 1, /* RTT_Nom = RZQ/2 */
517 .walat = 0, /* Write additional latency */
518 .ralat = 5, /* Read additional latency */
Marek Vasutf91c09a2014-10-24 23:39:07 +0200519 .mif3_mode = 3, /* Command prediction working mode */
520 .bi_on = 1, /* Bank interleaving enabled */
521 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
522 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
Fabio Estevamedf00932016-08-29 20:37:15 -0300523 .refsel = 1, /* Refresh cycles at 32KHz */
524 .refr = 7, /* 8 refresh commands per refresh cycle */
Marek Vasutf91c09a2014-10-24 23:39:07 +0200525};
526
527static struct mx6_ddr3_cfg elpida_4gib_1600 = {
528 .mem_speed = 1600,
529 .density = 4,
530 .width = 64,
531 .banks = 8,
532 .rowaddr = 16,
533 .coladdr = 10,
534 .pagesz = 2,
Marek Vasut89d48592015-12-16 15:40:07 +0100535 .trcd = 1375,
536 .trcmin = 4875,
537 .trasmin = 3500,
Marek Vasutf91c09a2014-10-24 23:39:07 +0200538};
539
Fabio Estevam7d29acd2014-11-14 09:37:01 -0200540static void ccgr_init(void)
541{
542 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
543
544 writel(0x00C03F3F, &ccm->CCGR0);
545 writel(0x0030FC03, &ccm->CCGR1);
546 writel(0x0FFFC000, &ccm->CCGR2);
547 writel(0x3FF00000, &ccm->CCGR3);
548 writel(0xFFFFF300, &ccm->CCGR4);
549 writel(0x0F0000C3, &ccm->CCGR5);
550 writel(0x000003FF, &ccm->CCGR6);
551}
552
Marek Vasutf91c09a2014-10-24 23:39:07 +0200553/*
554 * called from C runtime startup code (arch/arm/lib/crt0.S:_main)
555 * - we have a stack and a place to store GD, both in SRAM
556 * - no variable global data is available
557 */
558void board_init_f(ulong dummy)
559{
560 /* setup AIPS and disable watchdog */
561 arch_cpu_init();
562
Fabio Estevam7d29acd2014-11-14 09:37:01 -0200563 ccgr_init();
564 gpr_init();
565
Marek Vasutf91c09a2014-10-24 23:39:07 +0200566 /* setup GP timer */
567 timer_init();
568
569#ifdef CONFIG_BOARD_POSTCLK_INIT
570 board_postclk_init();
571#endif
Yangbo Lue37ac712019-06-21 11:42:28 +0800572#ifdef CONFIG_FSL_ESDHC_IMX
Marek Vasutf91c09a2014-10-24 23:39:07 +0200573 get_clocks();
574#endif
575
576 /* Setup IOMUX and configure basics. */
577 novena_spl_setup_iomux_audio();
578 novena_spl_setup_iomux_buttons();
579 novena_spl_setup_iomux_enet();
580 novena_spl_setup_iomux_fpga();
581 novena_spl_setup_iomux_i2c();
582 novena_spl_setup_iomux_pcie();
583 novena_spl_setup_iomux_sdhc();
584 novena_spl_setup_iomux_spi();
585 novena_spl_setup_iomux_uart();
586 novena_spl_setup_iomux_video();
587
588 /* UART clocks enabled and gd valid - init serial console */
589 preloader_console_init();
590
591 /* Start the DDR DRAM */
592 mx6dq_dram_iocfg(64, &novena_ddr_ioregs, &novena_grp_ioregs);
593 mx6_dram_cfg(&novena_ddr_info, &novena_mmdc_calib, &elpida_4gib_1600);
594
Marek Vasut89d48592015-12-16 15:40:07 +0100595 /* Perform DDR DRAM calibration */
596 udelay(100);
Eric Nelson7f17fb72016-10-30 16:33:48 -0700597 mmdc_do_write_level_calibration(&novena_ddr_info);
598 mmdc_do_dqs_calibration(&novena_ddr_info);
Marek Vasutf91c09a2014-10-24 23:39:07 +0200599}