blob: ab481441b296d45a60509e5bd6cc68fa0476a8ef [file] [log] [blame]
Stefano Babiceae49882011-01-20 08:05:15 +00001/*
2 * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
3 *
4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
5 *
6 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
7 *
8 * Configuration for the MX35pdk Freescale board.
9 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +020010 * SPDX-License-Identifier: GPL-2.0+
Stefano Babiceae49882011-01-20 08:05:15 +000011 */
12
13#ifndef __CONFIG_H
14#define __CONFIG_H
15
16#include <asm/arch/imx-regs.h>
17
18 /* High Level Configuration Options */
19#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
20#define CONFIG_MX35
Stefano Babiceae49882011-01-20 08:05:15 +000021
22#define CONFIG_DISPLAY_CPUINFO
Stefano Babiceae49882011-01-20 08:05:15 +000023
24/* Set TEXT at the beginning of the NOR flash */
25#define CONFIG_SYS_TEXT_BASE 0xA0000000
26
Stefano Babiceae49882011-01-20 08:05:15 +000027#define CONFIG_BOARD_EARLY_INIT_F
Helmut Raiger9660e442011-10-20 04:19:47 +000028#define CONFIG_BOARD_LATE_INIT
Stefano Babiceae49882011-01-20 08:05:15 +000029
30#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
31#define CONFIG_REVISION_TAG
32#define CONFIG_SETUP_MEMORY_TAGS
33#define CONFIG_INITRD_TAG
34
35/*
36 * Size of malloc() pool
37 */
38#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
39
40/*
41 * Hardware drivers
42 */
tremb089d032013-09-21 18:13:36 +020043#define CONFIG_SYS_I2C
44#define CONFIG_SYS_I2C_MXC
Stefano Babiceae49882011-01-20 08:05:15 +000045#define CONFIG_MXC_SPI
Stefano Babica4adedd2011-08-21 11:00:32 +020046#define CONFIG_MXC_GPIO
Stefano Babiceae49882011-01-20 08:05:15 +000047
48
49/*
50 * PMIC Configs
51 */
Łukasz Majewskibe3b51a2012-11-13 03:22:14 +000052#define CONFIG_POWER
53#define CONFIG_POWER_I2C
54#define CONFIG_POWER_FSL
Simon Glass913702c2014-05-20 06:01:34 -060055#define CONFIG_POWER_FSL_MC13892
Stefano Babiceae49882011-01-20 08:05:15 +000056#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08
Fabio Estevamd28d6a92011-10-25 01:35:37 +000057#define CONFIG_RTC_MC13XXX
Stefano Babiceae49882011-01-20 08:05:15 +000058
59/*
60 * MFD MC9SDZ60
61 */
62#define CONFIG_FSL_MC9SDZ60
63#define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR 0x69
64
65/*
66 * UART (console)
67 */
68#define CONFIG_MXC_UART
Stefano Babic40f6fff2011-11-22 15:22:39 +010069#define CONFIG_MXC_UART_BASE UART1_BASE
Stefano Babiceae49882011-01-20 08:05:15 +000070
71/* allow to overwrite serial and ethaddr */
72#define CONFIG_ENV_OVERWRITE
73#define CONFIG_CONS_INDEX 1
74#define CONFIG_BAUDRATE 115200
Stefano Babiceae49882011-01-20 08:05:15 +000075
76/*
77 * Command definition
78 */
79
80#include <config_cmd_default.h>
81
Fabio Estevam8dd15b42012-12-25 10:20:39 +000082#define CONFIG_OF_LIBFDT
Fabio Estevamee303c92012-10-24 09:44:29 +000083#define CONFIG_CMD_BOOTZ
Stefano Babiceae49882011-01-20 08:05:15 +000084#define CONFIG_CMD_PING
85#define CONFIG_CMD_DHCP
86#define CONFIG_BOOTP_SUBNETMASK
87#define CONFIG_BOOTP_GATEWAY
88#define CONFIG_BOOTP_DNS
89
90#define CONFIG_CMD_NAND
Stefano Babic0792a362012-04-01 03:23:01 +000091#define CONFIG_CMD_CACHE
Stefano Babiceae49882011-01-20 08:05:15 +000092
93#define CONFIG_CMD_I2C
94#define CONFIG_CMD_SPI
95#define CONFIG_CMD_MII
96#define CONFIG_CMD_NET
97#define CONFIG_NET_RETRY_COUNT 100
Fabio Estevamd28d6a92011-10-25 01:35:37 +000098#define CONFIG_CMD_DATE
Stefano Babiceae49882011-01-20 08:05:15 +000099
Benoît Thébaudeau961a7622012-11-13 09:58:25 +0000100#define CONFIG_CMD_USB
101#define CONFIG_USB_STORAGE
Stefano Babic32925392012-09-05 21:47:42 +0000102#define CONFIG_CMD_MMC
103#define CONFIG_DOS_PARTITION
104#define CONFIG_EFI_PARTITION
105#define CONFIG_CMD_EXT2
106#define CONFIG_CMD_FAT
107
Fabio Estevamec7503b2012-11-16 05:09:10 +0000108#define CONFIG_BOOTDELAY 1
Stefano Babiceae49882011-01-20 08:05:15 +0000109
110#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
111
112/*
113 * Ethernet on the debug board (SMC911)
114 */
115#define CONFIG_SMC911X
116#define CONFIG_SMC911X_16_BIT 1
117#define CONFIG_SMC911X_BASE CS5_BASE_ADDR
118
119#define CONFIG_HAS_ETH1
Stefano Babiceae49882011-01-20 08:05:15 +0000120#define CONFIG_ETHPRIME
121
122/*
123 * Ethernet on SOC (FEC)
124 */
125#define CONFIG_FEC_MXC
126#define IMX_FEC_BASE FEC_BASE_ADDR
127#define CONFIG_FEC_MXC_PHYADDR 0x1F
128
129#define CONFIG_MII
Stefano Babiceae49882011-01-20 08:05:15 +0000130
131#define CONFIG_ARP_TIMEOUT 200UL
132
133/*
134 * Miscellaneous configurable options
135 */
136#define CONFIG_SYS_LONGHELP /* undef to save memory */
Stefano Babiceae49882011-01-20 08:05:15 +0000137#define CONFIG_CMDLINE_EDITING
138#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
Stefano Babiceae49882011-01-20 08:05:15 +0000139
140#define CONFIG_AUTO_COMPLETE
141#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
142/* Print Buffer Size */
143#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
144#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
145#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
146
147#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
148#define CONFIG_SYS_MEMTEST_END 0x10000
149
150#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
151
152#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
153
Stefano Babiceae49882011-01-20 08:05:15 +0000154/*
155 * Physical Memory Map
156 */
Stefano Babic6b5acfc2011-08-02 14:42:36 +0200157#define CONFIG_NR_DRAM_BANKS 2
Stefano Babiceae49882011-01-20 08:05:15 +0000158#define PHYS_SDRAM_1 CSD0_BASE_ADDR
159#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
Stefano Babic6b5acfc2011-08-02 14:42:36 +0200160#define PHYS_SDRAM_2 CSD1_BASE_ADDR
161#define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024)
Stefano Babiceae49882011-01-20 08:05:15 +0000162
163#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
164#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000)
165#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2)
166#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
167 GENERATED_GBL_DATA_SIZE)
168#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
169 CONFIG_SYS_GBL_DATA_OFFSET)
170
171/*
172 * MTD Command for mtdparts
173 */
174#define CONFIG_CMD_MTDPARTS
175#define CONFIG_MTD_DEVICE
176#define CONFIG_FLASH_CFI_MTD
177#define CONFIG_MTD_PARTITIONS
178#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0"
179#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:1m(boot),5m(linux)," \
180 "96m(root),8m(cfg),1938m(user);" \
181 "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"
182
183/*
184 * FLASH and environment organization
185 */
186#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
187#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
188#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
189/* Monitor at beginning of flash */
190#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
191#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
192
193#define CONFIG_ENV_SECT_SIZE (128 * 1024)
194#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
195
196/* Address and size of Redundant Environment Sector */
197#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
198#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
199
200#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
201 CONFIG_SYS_MONITOR_LEN)
202
203#define CONFIG_ENV_IS_IN_FLASH
204
205#if defined(CONFIG_FSL_ENV_IN_NAND)
206 #define CONFIG_ENV_IS_IN_NAND
207 #define CONFIG_ENV_OFFSET (1024 * 1024)
208#endif
209
210/*
211 * CFI FLASH driver setup
212 */
213#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
214#define CONFIG_FLASH_CFI_DRIVER
215
216/* A non-standard buffered write algorithm */
217#define CONFIG_FLASH_SPANSION_S29WS_N
218#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */
219#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */
220
221/*
222 * NAND FLASH driver setup
223 */
224#define CONFIG_NAND_MXC
Stefano Babiceae49882011-01-20 08:05:15 +0000225#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
226#define CONFIG_SYS_MAX_NAND_DEVICE 1
227#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
228#define CONFIG_MXC_NAND_HWECC
229#define CONFIG_SYS_NAND_LARGEPAGE
230
Benoît Thébaudeau961a7622012-11-13 09:58:25 +0000231/* EHCI driver */
232#define CONFIG_USB_EHCI
233#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
234#define CONFIG_EHCI_IS_TDI
235#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
236#define CONFIG_USB_EHCI_MXC
237#define CONFIG_MXC_USB_PORT 0
238#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \
239 MXC_EHCI_POWER_PINS_ENABLED | \
240 MXC_EHCI_OC_PIN_ACTIVE_LOW)
241#define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
242
Stefano Babic32925392012-09-05 21:47:42 +0000243/* mmc driver */
244#define CONFIG_MMC
245#define CONFIG_GENERIC_MMC
246#define CONFIG_FSL_ESDHC
247#define CONFIG_SYS_FSL_ESDHC_ADDR 0
248#define CONFIG_SYS_FSL_ESDHC_NUM 1
249
Stefano Babiceae49882011-01-20 08:05:15 +0000250/*
251 * Default environment and default scripts
252 * to update uboot and load kernel
253 */
Stefano Babiceae49882011-01-20 08:05:15 +0000254
255#define CONFIG_HOSTNAME "mx35pdk"
256#define CONFIG_EXTRA_ENV_SETTINGS \
257 "netdev=eth1\0" \
258 "ethprime=smc911x\0" \
259 "nfsargs=setenv bootargs root=/dev/nfs rw " \
260 "nfsroot=${serverip}:${rootpath}\0" \
261 "ramargs=setenv bootargs root=/dev/ram rw\0" \
262 "addip_sta=setenv bootargs ${bootargs} " \
263 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
264 ":${hostname}:${netdev}:off panic=1\0" \
265 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
266 "addip=if test -n ${ipdyn};then run addip_dyn;" \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200267 "else run addip_sta;fi\0" \
Stefano Babiceae49882011-01-20 08:05:15 +0000268 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
269 "addtty=setenv bootargs ${bootargs}" \
270 " console=ttymxc0,${baudrate}\0" \
271 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
272 "loadaddr=80800000\0" \
273 "kernel_addr_r=80800000\0" \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200274 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
275 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
276 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
Stefano Babiceae49882011-01-20 08:05:15 +0000277 "flash_self=run ramargs addip addtty addmtd addmisc;" \
278 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
279 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
280 "bootm ${kernel_addr}\0" \
281 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
282 "run nfsargs addip addtty addmtd addmisc;" \
283 "bootm ${kernel_addr_r}\0" \
284 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
285 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200286 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
Stefano Babiceae49882011-01-20 08:05:15 +0000287 "load=tftp ${loadaddr} ${u-boot}\0" \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200288 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
Stefano Babic32925392012-09-05 21:47:42 +0000289 "update=protect off ${uboot_addr} +80000;" \
290 "erase ${uboot_addr} +80000;" \
Stefano Babiceae49882011-01-20 08:05:15 +0000291 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
292 "upd=if run load;then echo Updating u-boot;if run update;" \
293 "then echo U-Boot updated;" \
294 "else echo Error updating u-boot !;" \
295 "echo Board without bootloader !!;" \
296 "fi;" \
297 "else echo U-Boot not downloaded..exiting;fi\0" \
298 "bootcmd=run net_nfs\0"
299
300#endif /* __CONFIG_H */