Charles Manning | 832472a | 2014-03-06 15:40:50 +1300 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2014 Charles Manning <cdhmanning@gmail.com> |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | * |
| 6 | * Reference doc http://www.altera.com.cn/literature/hb/cyclone-v/cv_5400A.pdf |
| 7 | * Note this doc is not entirely accurate. Of particular interest to us is the |
| 8 | * "header" length field being in U32s and not bytes. |
| 9 | * |
| 10 | * "Header" is a structure of the following format. |
| 11 | * this is positioned at 0x40. |
| 12 | * |
| 13 | * Endian is LSB. |
| 14 | * |
| 15 | * Offset Length Usage |
| 16 | * ----------------------- |
| 17 | * 0x40 4 Validation word 0x31305341 |
| 18 | * 0x44 1 Version (whatever, zero is fine) |
| 19 | * 0x45 1 Flags (unused, zero is fine) |
| 20 | * 0x46 2 Length (in units of u32, including the end checksum). |
| 21 | * 0x48 2 Zero |
| 22 | * 0x4A 2 Checksum over the header. NB Not CRC32 |
| 23 | * |
| 24 | * At the end of the code we have a 32-bit CRC checksum over whole binary |
| 25 | * excluding the CRC. |
| 26 | * |
| 27 | * Note that the CRC used here is **not** the zlib/Adler crc32. It is the |
| 28 | * CRC-32 used in bzip2, ethernet and elsewhere. |
| 29 | * |
| 30 | * The image is padded out to 64k, because that is what is |
| 31 | * typically used to write the image to the boot medium. |
| 32 | */ |
| 33 | |
| 34 | #include "pbl_crc32.h" |
| 35 | #include "imagetool.h" |
| 36 | #include <image.h> |
| 37 | |
| 38 | #define HEADER_OFFSET 0x40 |
| 39 | #define VALIDATION_WORD 0x31305341 |
| 40 | #define PADDED_SIZE 0x10000 |
| 41 | |
| 42 | /* To allow for adding CRC, the max input size is a bit smaller. */ |
| 43 | #define MAX_INPUT_SIZE (PADDED_SIZE - sizeof(uint32_t)) |
| 44 | |
| 45 | static uint8_t buffer[PADDED_SIZE]; |
| 46 | |
| 47 | static struct socfpga_header { |
| 48 | uint32_t validation; |
| 49 | uint8_t version; |
| 50 | uint8_t flags; |
| 51 | uint16_t length_u32; |
| 52 | uint16_t zero; |
| 53 | uint16_t checksum; |
| 54 | } header; |
| 55 | |
| 56 | /* |
| 57 | * The header checksum is just a very simple checksum over |
| 58 | * the header area. |
| 59 | * There is still a crc32 over the whole lot. |
| 60 | */ |
| 61 | static uint16_t hdr_checksum(struct socfpga_header *header) |
| 62 | { |
| 63 | int len = sizeof(*header) - sizeof(header->checksum); |
| 64 | uint8_t *buf = (uint8_t *)header; |
| 65 | uint16_t ret = 0; |
| 66 | |
| 67 | while (--len) |
| 68 | ret += *buf++; |
| 69 | |
| 70 | return ret; |
| 71 | } |
| 72 | |
| 73 | |
| 74 | static void build_header(uint8_t *buf, uint8_t version, uint8_t flags, |
| 75 | uint16_t length_bytes) |
| 76 | { |
| 77 | header.validation = htole32(VALIDATION_WORD); |
| 78 | header.version = version; |
| 79 | header.flags = flags; |
| 80 | header.length_u32 = htole16(length_bytes/4); |
| 81 | header.zero = 0; |
| 82 | header.checksum = htole16(hdr_checksum(&header)); |
| 83 | |
| 84 | memcpy(buf, &header, sizeof(header)); |
| 85 | } |
| 86 | |
| 87 | /* |
| 88 | * Perform a rudimentary verification of header and return |
| 89 | * size of image. |
| 90 | */ |
| 91 | static int verify_header(const uint8_t *buf) |
| 92 | { |
| 93 | memcpy(&header, buf, sizeof(header)); |
| 94 | |
| 95 | if (le32toh(header.validation) != VALIDATION_WORD) |
| 96 | return -1; |
| 97 | if (le16toh(header.checksum) != hdr_checksum(&header)) |
| 98 | return -1; |
| 99 | |
| 100 | return le16toh(header.length_u32) * 4; |
| 101 | } |
| 102 | |
| 103 | /* Sign the buffer and return the signed buffer size */ |
| 104 | static int sign_buffer(uint8_t *buf, |
| 105 | uint8_t version, uint8_t flags, |
| 106 | int len, int pad_64k) |
| 107 | { |
| 108 | uint32_t calc_crc; |
| 109 | |
| 110 | /* Align the length up */ |
| 111 | len = (len + 3) & (~3); |
| 112 | |
| 113 | /* Build header, adding 4 bytes to length to hold the CRC32. */ |
| 114 | build_header(buf + HEADER_OFFSET, version, flags, len + 4); |
| 115 | |
| 116 | /* Calculate and apply the CRC */ |
| 117 | calc_crc = ~pbl_crc32(0, (char *)buf, len); |
| 118 | |
| 119 | *((uint32_t *)(buf + len)) = htole32(calc_crc); |
| 120 | |
| 121 | if (!pad_64k) |
| 122 | return len + 4; |
| 123 | |
| 124 | return PADDED_SIZE; |
| 125 | } |
| 126 | |
| 127 | /* Verify that the buffer looks sane */ |
| 128 | static int verify_buffer(const uint8_t *buf) |
| 129 | { |
| 130 | int len; /* Including 32bit CRC */ |
| 131 | uint32_t calc_crc; |
| 132 | uint32_t buf_crc; |
| 133 | |
| 134 | len = verify_header(buf + HEADER_OFFSET); |
| 135 | if (len < 0) { |
| 136 | fprintf(stderr, "Invalid header\n"); |
| 137 | return -1; |
| 138 | } |
| 139 | |
| 140 | if (len < HEADER_OFFSET || len > PADDED_SIZE) { |
| 141 | fprintf(stderr, "Invalid header length (%i)\n", len); |
| 142 | return -1; |
| 143 | } |
| 144 | |
| 145 | /* |
| 146 | * Adjust length to the base of the CRC. |
| 147 | * Check the CRC. |
| 148 | */ |
| 149 | len -= 4; |
| 150 | |
| 151 | calc_crc = ~pbl_crc32(0, (const char *)buf, len); |
| 152 | |
| 153 | buf_crc = le32toh(*((uint32_t *)(buf + len))); |
| 154 | |
| 155 | if (buf_crc != calc_crc) { |
| 156 | fprintf(stderr, "CRC32 does not match (%08x != %08x)\n", |
| 157 | buf_crc, calc_crc); |
| 158 | return -1; |
| 159 | } |
| 160 | |
| 161 | return 0; |
| 162 | } |
| 163 | |
| 164 | /* mkimage glue functions */ |
| 165 | static int socfpgaimage_verify_header(unsigned char *ptr, int image_size, |
| 166 | struct image_tool_params *params) |
| 167 | { |
| 168 | if (image_size != PADDED_SIZE) |
| 169 | return -1; |
| 170 | |
| 171 | return verify_buffer(ptr); |
| 172 | } |
| 173 | |
| 174 | static void socfpgaimage_print_header(const void *ptr) |
| 175 | { |
| 176 | if (verify_buffer(ptr) == 0) |
| 177 | printf("Looks like a sane SOCFPGA preloader\n"); |
| 178 | else |
| 179 | printf("Not a sane SOCFPGA preloader\n"); |
| 180 | } |
| 181 | |
| 182 | static int socfpgaimage_check_params(struct image_tool_params *params) |
| 183 | { |
| 184 | /* Not sure if we should be accepting fflags */ |
| 185 | return (params->dflag && (params->fflag || params->lflag)) || |
| 186 | (params->fflag && (params->dflag || params->lflag)) || |
| 187 | (params->lflag && (params->dflag || params->fflag)); |
| 188 | } |
| 189 | |
| 190 | static int socfpgaimage_check_image_types(uint8_t type) |
| 191 | { |
| 192 | if (type == IH_TYPE_SOCFPGAIMAGE) |
| 193 | return EXIT_SUCCESS; |
| 194 | return EXIT_FAILURE; |
| 195 | } |
| 196 | |
| 197 | /* |
| 198 | * To work in with the mkimage framework, we do some ugly stuff... |
| 199 | * |
| 200 | * First, socfpgaimage_vrec_header() is called. |
| 201 | * We prepend a fake header big enough to make the file PADDED_SIZE. |
| 202 | * This gives us enough space to do what we want later. |
| 203 | * |
| 204 | * Next, socfpgaimage_set_header() is called. |
| 205 | * We fix up the buffer by moving the image to the start of the buffer. |
| 206 | * We now have some room to do what we need (add CRC and padding). |
| 207 | */ |
| 208 | |
| 209 | static int data_size; |
| 210 | #define FAKE_HEADER_SIZE (PADDED_SIZE - data_size) |
| 211 | |
| 212 | static int socfpgaimage_vrec_header(struct image_tool_params *params, |
| 213 | struct image_type_params *tparams) |
| 214 | { |
| 215 | struct stat sbuf; |
| 216 | |
| 217 | if (params->datafile && |
| 218 | stat(params->datafile, &sbuf) == 0 && |
| 219 | sbuf.st_size <= MAX_INPUT_SIZE) { |
| 220 | data_size = sbuf.st_size; |
| 221 | tparams->header_size = FAKE_HEADER_SIZE; |
| 222 | } |
| 223 | return 0; |
| 224 | } |
| 225 | |
| 226 | static void socfpgaimage_set_header(void *ptr, struct stat *sbuf, int ifd, |
| 227 | struct image_tool_params *params) |
| 228 | { |
| 229 | uint8_t *buf = (uint8_t *)ptr; |
| 230 | |
| 231 | /* |
| 232 | * This function is called after vrec_header() has been called. |
| 233 | * At this stage we have the FAKE_HEADER_SIZE dummy bytes followed by |
| 234 | * data_size image bytes. Total = PADDED_SIZE. |
| 235 | * We need to fix the buffer by moving the image bytes back to |
| 236 | * the beginning of the buffer, then actually do the signing stuff... |
| 237 | */ |
| 238 | memmove(buf, buf + FAKE_HEADER_SIZE, data_size); |
| 239 | memset(buf + data_size, 0, FAKE_HEADER_SIZE); |
| 240 | |
| 241 | sign_buffer(buf, 0, 0, data_size, 0); |
| 242 | } |
| 243 | |
| 244 | static struct image_type_params socfpgaimage_params = { |
| 245 | .name = "Altera SOCFPGA preloader support", |
| 246 | .vrec_header = socfpgaimage_vrec_header, |
| 247 | .header_size = 0, /* This will be modified by vrec_header() */ |
| 248 | .hdr = (void *)buffer, |
| 249 | .check_image_type = socfpgaimage_check_image_types, |
| 250 | .verify_header = socfpgaimage_verify_header, |
| 251 | .print_header = socfpgaimage_print_header, |
| 252 | .set_header = socfpgaimage_set_header, |
| 253 | .check_params = socfpgaimage_check_params, |
| 254 | }; |
| 255 | |
| 256 | void init_socfpga_image_type(void) |
| 257 | { |
| 258 | register_image_type(&socfpgaimage_params); |
| 259 | } |