blob: a6bfa76bf05ebcfe821c3d21bf19e650cd907441 [file] [log] [blame]
wdenk81a88242002-10-26 15:22:42 +00001/*
2 * (C) Copyright 2002
3 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
4 * Marius Groeger <mgroeger@sysgo.de>
Detlev Zundel792a09e2009-05-13 10:54:10 +02005 * Gary Jennejohn <garyj@denx.de>
wdenk81a88242002-10-26 15:22:42 +00006 * David Mueller <d.mueller@elsoft.ch>
7 *
8 * Configuation settings for the SAMSUNG SMDK2410 board.
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
wdenk81a88242002-10-26 15:22:42 +000011 */
12
13#ifndef __CONFIG_H
14#define __CONFIG_H
15
16/*
wdenk81a88242002-10-26 15:22:42 +000017 * High Level Configuration Options
18 * (easy to change)
19 */
Masahiro Yamadaf2168442014-11-06 14:59:35 +090020#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000021#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */
22#define CONFIG_SMDK2410 /* on a SAMSUNG SMDK2410 Board */
wdenk81a88242002-10-26 15:22:42 +000023
David Müller (ELSOFT AG)4479fc52011-03-24 22:28:04 +000024#define CONFIG_SYS_TEXT_BASE 0x0
25
David Müller (ELSOFT AG)7e2e04f2014-10-30 09:15:52 +010026#define CONFIG_SYS_GENERIC_BOARD
27
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000028#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
wdenk81a88242002-10-26 15:22:42 +000029
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000030/* input clock of PLL (the SMDK2410 has 12MHz input clock) */
31#define CONFIG_SYS_CLK_FREQ 12000000
wdenk81a88242002-10-26 15:22:42 +000032
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000033#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
34#define CONFIG_SETUP_MEMORY_TAGS
35#define CONFIG_INITRD_TAG
wdenk81a88242002-10-26 15:22:42 +000036
37/*
38 * Hardware drivers
39 */
Ben Warrenb1c0eaa2009-08-25 13:09:37 -070040#define CONFIG_CS8900 /* we have a CS8900 on-board */
41#define CONFIG_CS8900_BASE 0x19000300
42#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
wdenk81a88242002-10-26 15:22:42 +000043
44/*
45 * select serial console configuration
46 */
Jean-Christophe PLAGNIOL-VILLARD300f99f2009-03-30 18:58:39 +020047#define CONFIG_S3C24X0_SERIAL
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000048#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */
49
50/************************************************************
51 * USB support (currently only works with D-cache off)
52 ************************************************************/
53#define CONFIG_USB_OHCI
Marek Vasutfb24ffc2012-07-21 05:02:22 +000054#define CONFIG_USB_OHCI_S3C24XX
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000055#define CONFIG_USB_KEYBOARD
56#define CONFIG_USB_STORAGE
57#define CONFIG_DOS_PARTITION
wdenk81a88242002-10-26 15:22:42 +000058
wdenk48b42612003-06-19 23:01:32 +000059/************************************************************
60 * RTC
61 ************************************************************/
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000062#define CONFIG_RTC_S3C24X0
wdenk48b42612003-06-19 23:01:32 +000063
wdenk81a88242002-10-26 15:22:42 +000064
65#define CONFIG_BAUDRATE 115200
66
Jon Loeliger46da1e92007-07-04 22:33:30 -050067/*
Jon Loeliger079a1362007-07-10 10:12:10 -050068 * BOOTP options
69 */
70#define CONFIG_BOOTP_BOOTFILESIZE
71#define CONFIG_BOOTP_BOOTPATH
72#define CONFIG_BOOTP_GATEWAY
73#define CONFIG_BOOTP_HOSTNAME
74
Jon Loeliger079a1362007-07-10 10:12:10 -050075/*
Jon Loeliger46da1e92007-07-04 22:33:30 -050076 * Command line configuration.
77 */
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000078#define CONFIG_CMD_BSP
Jon Loeliger46da1e92007-07-04 22:33:30 -050079#define CONFIG_CMD_CACHE
Jon Loeliger46da1e92007-07-04 22:33:30 -050080#define CONFIG_CMD_DATE
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000081#define CONFIG_CMD_DHCP
Jon Loeliger46da1e92007-07-04 22:33:30 -050082#define CONFIG_CMD_ELF
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000083#define CONFIG_CMD_NAND
84#define CONFIG_CMD_PING
85#define CONFIG_CMD_REGINFO
86#define CONFIG_CMD_USB
Jon Loeliger46da1e92007-07-04 22:33:30 -050087
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000088#define CONFIG_SYS_HUSH_PARSER
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000089#define CONFIG_CMDLINE_EDITING
wdenk81a88242002-10-26 15:22:42 +000090
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +000091/* autoboot */
92#define CONFIG_BOOTDELAY 5
93#define CONFIG_BOOT_RETRY_TIME -1
94#define CONFIG_RESET_TO_RETRY
95#define CONFIG_ZERO_BOOTDELAY_CHECK
96
97#define CONFIG_NETMASK 255.255.255.0
wdenk81a88242002-10-26 15:22:42 +000098#define CONFIG_IPADDR 10.0.0.110
99#define CONFIG_SERVERIP 10.0.0.1
wdenk81a88242002-10-26 15:22:42 +0000100
Jon Loeliger46da1e92007-07-04 22:33:30 -0500101#if defined(CONFIG_CMD_KGDB)
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000102#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
wdenk81a88242002-10-26 15:22:42 +0000103#endif
104
105/*
106 * Miscellaneous configurable options
107 */
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000108#define CONFIG_SYS_LONGHELP /* undef to save memory */
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000109#define CONFIG_SYS_CBSIZE 256
110/* Print Buffer Size */
111#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
112 sizeof(CONFIG_SYS_PROMPT)+16)
113#define CONFIG_SYS_MAXARGS 16
114#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
wdenk81a88242002-10-26 15:22:42 +0000115
David Müller (ELSOFT AG)3d3206f2011-12-22 01:19:25 +0000116#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
wdenk81a88242002-10-26 15:22:42 +0000117
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000118#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
119#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
wdenk81a88242002-10-26 15:22:42 +0000120
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000121#define CONFIG_SYS_LOAD_ADDR 0x30800000
122
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000123/* support additional compression methods */
124#define CONFIG_BZIP2
125#define CONFIG_LZO
126#define CONFIG_LZMA
127
wdenk81a88242002-10-26 15:22:42 +0000128/*-----------------------------------------------------------------------
wdenk81a88242002-10-26 15:22:42 +0000129 * Physical Memory Map
130 */
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000131#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
wdenk81a88242002-10-26 15:22:42 +0000132#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
133#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
134
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000135#define PHYS_FLASH_1 0x00000000 /* Flash Bank #0 */
wdenk81a88242002-10-26 15:22:42 +0000136
David Müller (ELSOFT AG)a5ec7f62011-03-24 22:28:05 +0000137#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
wdenk81a88242002-10-26 15:22:42 +0000138
139/*-----------------------------------------------------------------------
140 * FLASH and environment organization
141 */
142
David Müller (ELSOFT AG)a5ec7f62011-03-24 22:28:05 +0000143#define CONFIG_SYS_FLASH_CFI
144#define CONFIG_FLASH_CFI_DRIVER
145#define CONFIG_FLASH_CFI_LEGACY
146#define CONFIG_SYS_FLASH_LEGACY_512Kx16
147#define CONFIG_FLASH_SHOW_PROGRESS 45
wdenk81a88242002-10-26 15:22:42 +0000148
David Müller (ELSOFT AG)a5ec7f62011-03-24 22:28:05 +0000149#define CONFIG_SYS_MAX_FLASH_BANKS 1
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000150#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
David Müller (ELSOFT AG)a5ec7f62011-03-24 22:28:05 +0000151#define CONFIG_SYS_MAX_FLASH_SECT (19)
wdenk81a88242002-10-26 15:22:42 +0000152
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000153#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000)
154#define CONFIG_ENV_IS_IN_FLASH
155#define CONFIG_ENV_SIZE 0x10000
156/* allow to overwrite serial and ethaddr */
157#define CONFIG_ENV_OVERWRITE
158
159/*
160 * Size of malloc() pool
161 * BZIP2 / LZO / LZMA need a lot of RAM
162 */
163#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
wdenk81a88242002-10-26 15:22:42 +0000164
David Müller (ELSOFT AG)a5ec7f62011-03-24 22:28:05 +0000165#define CONFIG_SYS_MONITOR_LEN (448 * 1024)
166#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
167
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000168/*
169 * NAND configuration
170 */
171#ifdef CONFIG_CMD_NAND
172#define CONFIG_NAND_S3C2410
173#define CONFIG_SYS_S3C2410_NAND_HWECC
174#define CONFIG_SYS_MAX_NAND_DEVICE 1
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000175#define CONFIG_SYS_NAND_BASE 0x4E000000
176#endif
177
178/*
179 * File system
180 */
181#define CONFIG_CMD_FAT
182#define CONFIG_CMD_EXT2
183#define CONFIG_CMD_UBI
184#define CONFIG_CMD_UBIFS
185#define CONFIG_CMD_MTDPARTS
186#define CONFIG_MTD_DEVICE
187#define CONFIG_MTD_PARTITIONS
188#define CONFIG_YAFFS2
189#define CONFIG_RBTREE
190
David Müller (ELSOFT AG)b9f15902011-03-24 22:28:03 +0000191/* additions for new relocation code, must be added to all boards */
192#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
193#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
194 GENERATED_GBL_DATA_SIZE)
195
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000196#define CONFIG_BOARD_EARLY_INIT_F
David Müller (ELSOFT AG)b9f15902011-03-24 22:28:03 +0000197
David Müller (ELSOFT AG)d0b375f2011-03-24 22:28:06 +0000198#endif /* __CONFIG_H */