blob: dc80b4746d4636fb960f9754061e9a7fc6ca1175 [file] [log] [blame]
wdenkf4675562002-10-02 14:20:15 +00001/*
Wolfgang Denk29f8f582008-08-09 23:17:32 +02002 * (C) Copyright 2000-2008
wdenkf4675562002-10-02 14:20:15 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
37#define CONFIG_TQM850L 1 /* ...on a TQM8xxL module */
38
39#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
40#undef CONFIG_8xx_CONS_SMC2
41#undef CONFIG_8xx_CONS_NONE
42#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
wdenkf4675562002-10-02 14:20:15 +000043
wdenkae3af052003-08-07 22:18:11 +000044#define CONFIG_BOOTCOUNT_LIMIT
45
46#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
wdenkf4675562002-10-02 14:20:15 +000047
48#define CONFIG_BOARD_TYPES 1 /* support board types */
49
Wolfgang Denk32bf3d12008-03-03 12:16:44 +010050#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
wdenkf4675562002-10-02 14:20:15 +000051
52#undef CONFIG_BOOTARGS
wdenk6aff3112002-12-17 01:51:00 +000053
54#define CONFIG_EXTRA_ENV_SETTINGS \
wdenkae3af052003-08-07 22:18:11 +000055 "netdev=eth0\0" \
wdenk6aff3112002-12-17 01:51:00 +000056 "nfsargs=setenv bootargs root=/dev/nfs rw " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010057 "nfsroot=${serverip}:${rootpath}\0" \
wdenk6aff3112002-12-17 01:51:00 +000058 "ramargs=setenv bootargs root=/dev/ram rw\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010059 "addip=setenv bootargs ${bootargs} " \
60 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
61 ":${hostname}:${netdev}:off panic=1\0" \
wdenk6aff3112002-12-17 01:51:00 +000062 "flash_nfs=run nfsargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010063 "bootm ${kernel_addr}\0" \
wdenk6aff3112002-12-17 01:51:00 +000064 "flash_self=run ramargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010065 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
66 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
wdenk6aff3112002-12-17 01:51:00 +000067 "rootpath=/opt/eldk/ppc_8xx\0" \
Wolfgang Denk29f8f582008-08-09 23:17:32 +020068 "hostname=TQM850L\0" \
69 "bootfile=TQM850L/uImage\0" \
Wolfgang Denkeb6da802007-09-16 02:39:35 +020070 "fdt_addr=40040000\0" \
71 "kernel_addr=40060000\0" \
72 "ramdisk_addr=40200000\0" \
Wolfgang Denk29f8f582008-08-09 23:17:32 +020073 "u-boot=TQM850L/u-image.bin\0" \
74 "load=tftp 200000 ${u-boot}\0" \
75 "update=prot off 40000000 +${filesize};" \
76 "era 40000000 +${filesize};" \
77 "cp.b 200000 40000000 ${filesize};" \
78 "sete filesize;save\0" \
wdenk6aff3112002-12-17 01:51:00 +000079 ""
80#define CONFIG_BOOTCOMMAND "run flash_self"
wdenkf4675562002-10-02 14:20:15 +000081
82#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020083#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
wdenkf4675562002-10-02 14:20:15 +000084
85#undef CONFIG_WATCHDOG /* watchdog disabled */
86
87#define CONFIG_STATUS_LED 1 /* Status LED enabled */
88
89#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
90
Jon Loeliger37d4bb72007-07-09 21:38:02 -050091/*
92 * BOOTP options
93 */
94#define CONFIG_BOOTP_SUBNETMASK
95#define CONFIG_BOOTP_GATEWAY
96#define CONFIG_BOOTP_HOSTNAME
97#define CONFIG_BOOTP_BOOTPATH
98#define CONFIG_BOOTP_BOOTFILESIZE
99
wdenkf4675562002-10-02 14:20:15 +0000100
101#define CONFIG_MAC_PARTITION
102#define CONFIG_DOS_PARTITION
103
104#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
105
Jon Loeliger26946902007-07-04 22:30:50 -0500106/*
107 * Command line configuration.
108 */
109#include <config_cmd_default.h>
wdenkf4675562002-10-02 14:20:15 +0000110
Jon Loeliger26946902007-07-04 22:30:50 -0500111#define CONFIG_CMD_ASKENV
112#define CONFIG_CMD_DATE
113#define CONFIG_CMD_DHCP
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200114#define CONFIG_CMD_ELF
Wolfgang Denk9a63b7f2009-02-21 21:51:21 +0100115#define CONFIG_CMD_EXT2
Jon Loeliger26946902007-07-04 22:30:50 -0500116#define CONFIG_CMD_IDE
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200117#define CONFIG_CMD_JFFS2
Jon Loeliger26946902007-07-04 22:30:50 -0500118#define CONFIG_CMD_NFS
119#define CONFIG_CMD_SNTP
120
wdenkf4675562002-10-02 14:20:15 +0000121
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200122#define CONFIG_NETCONSOLE
123
wdenkf4675562002-10-02 14:20:15 +0000124/*
125 * Miscellaneous configurable options
126 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200127#define CONFIG_SYS_LONGHELP /* undef to save memory */
128#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
wdenk6aff3112002-12-17 01:51:00 +0000129
Wolfgang Denk2751a952006-10-28 02:29:14 +0200130#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200131#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
132#ifdef CONFIG_SYS_HUSH_PARSER
133#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
wdenk6aff3112002-12-17 01:51:00 +0000134#endif
135
Jon Loeliger26946902007-07-04 22:30:50 -0500136#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200137#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenkf4675562002-10-02 14:20:15 +0000138#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200139#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenkf4675562002-10-02 14:20:15 +0000140#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200141#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
142#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
143#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenkf4675562002-10-02 14:20:15 +0000144
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200145#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
146#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
wdenkf4675562002-10-02 14:20:15 +0000147
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200148#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
wdenkf4675562002-10-02 14:20:15 +0000149
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200150#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenkf4675562002-10-02 14:20:15 +0000151
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200152#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
wdenkf4675562002-10-02 14:20:15 +0000153
154/*
155 * Low Level Configuration Settings
156 * (address mappings, register initial values, etc.)
157 * You should know what you are doing if you make changes here.
158 */
159/*-----------------------------------------------------------------------
160 * Internal Memory Mapped Register
161 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200162#define CONFIG_SYS_IMMR 0xFFF00000
wdenkf4675562002-10-02 14:20:15 +0000163
164/*-----------------------------------------------------------------------
165 * Definitions for initial stack pointer and data area (in DPRAM)
166 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200167#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
168#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
169#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
170#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
171#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenkf4675562002-10-02 14:20:15 +0000172
173/*-----------------------------------------------------------------------
174 * Start addresses for the final memory configuration
175 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200176 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenkf4675562002-10-02 14:20:15 +0000177 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200178#define CONFIG_SYS_SDRAM_BASE 0x00000000
179#define CONFIG_SYS_FLASH_BASE 0x40000000
180#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
181#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
182#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
wdenkf4675562002-10-02 14:20:15 +0000183
184/*
185 * For booting Linux, the board info and command line data
186 * have to be in the first 8 MB of memory, since this is
187 * the maximum mapped by the Linux kernel during initialization.
188 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200189#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenkf4675562002-10-02 14:20:15 +0000190
191/*-----------------------------------------------------------------------
192 * FLASH organization
193 */
wdenkf4675562002-10-02 14:20:15 +0000194
Martin Krausee318d9e2007-09-27 11:10:08 +0200195/* use CFI flash driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200196#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200197#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200198#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
199#define CONFIG_SYS_FLASH_EMPTY_INFO
200#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
201#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
202#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
wdenkf4675562002-10-02 14:20:15 +0000203
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200204#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200205#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
206#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
wdenkf4675562002-10-02 14:20:15 +0000207
208/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200209#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
210#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
wdenkf4675562002-10-02 14:20:15 +0000211
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200212#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
Wolfgang Denk67c31032007-09-16 17:10:04 +0200213
Wolfgang Denk7c803be2008-09-16 18:02:19 +0200214#define CONFIG_MISC_INIT_R /* Make sure to remap flashes correctly */
215
wdenkf4675562002-10-02 14:20:15 +0000216/*-----------------------------------------------------------------------
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200217 * Dynamic MTD partition support
218 */
Stefan Roese68d7d652009-03-19 13:30:36 +0100219#define CONFIG_CMD_MTDPARTS
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200220#define MTDIDS_DEFAULT "nor0=TQM8xxL-0"
221
222#define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \
223 "128k(dtb)," \
224 "1664k(kernel)," \
225 "2m(rootfs)," \
Wolfgang Denkcd829192008-08-12 16:08:38 +0200226 "4m(data)"
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200227
228/*-----------------------------------------------------------------------
wdenkf4675562002-10-02 14:20:15 +0000229 * Hardware Information Block
230 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200231#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
232#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
233#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
wdenkf4675562002-10-02 14:20:15 +0000234
235/*-----------------------------------------------------------------------
236 * Cache Configuration
237 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeliger26946902007-07-04 22:30:50 -0500239#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200240#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
wdenkf4675562002-10-02 14:20:15 +0000241#endif
242
243/*-----------------------------------------------------------------------
244 * SYPCR - System Protection Control 11-9
245 * SYPCR can only be written once after reset!
246 *-----------------------------------------------------------------------
247 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
248 */
249#if defined(CONFIG_WATCHDOG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200250#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
wdenkf4675562002-10-02 14:20:15 +0000251 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
252#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200253#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
wdenkf4675562002-10-02 14:20:15 +0000254#endif
255
256/*-----------------------------------------------------------------------
257 * SIUMCR - SIU Module Configuration 11-6
258 *-----------------------------------------------------------------------
259 * PCMCIA config., multi-function pin tri-state
260 */
261#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200262#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
wdenkf4675562002-10-02 14:20:15 +0000263#else /* we must activate GPL5 in the SIUMCR for CAN */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200264#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
wdenkf4675562002-10-02 14:20:15 +0000265#endif /* CONFIG_CAN_DRIVER */
266
267/*-----------------------------------------------------------------------
268 * TBSCR - Time Base Status and Control 11-26
269 *-----------------------------------------------------------------------
270 * Clear Reference Interrupt Status, Timebase freezing enabled
271 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200272#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
wdenkf4675562002-10-02 14:20:15 +0000273
274/*-----------------------------------------------------------------------
275 * RTCSC - Real-Time Clock Status and Control Register 11-27
276 *-----------------------------------------------------------------------
277 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200278#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
wdenkf4675562002-10-02 14:20:15 +0000279
280/*-----------------------------------------------------------------------
281 * PISCR - Periodic Interrupt Status and Control 11-31
282 *-----------------------------------------------------------------------
283 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
284 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200285#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
wdenkf4675562002-10-02 14:20:15 +0000286
287/*-----------------------------------------------------------------------
288 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
289 *-----------------------------------------------------------------------
290 * Reset PLL lock status sticky bit, timer expired status bit and timer
291 * interrupt status bit
wdenkf4675562002-10-02 14:20:15 +0000292 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200293#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
wdenkf4675562002-10-02 14:20:15 +0000294
295/*-----------------------------------------------------------------------
296 * SCCR - System Clock and reset Control Register 15-27
297 *-----------------------------------------------------------------------
298 * Set clock output, timebase and RTC source and divider,
299 * power management and some other internal clocks
300 */
301#define SCCR_MASK SCCR_EBDF11
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200302#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
wdenkf4675562002-10-02 14:20:15 +0000303 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
304 SCCR_DFALCD00)
wdenkf4675562002-10-02 14:20:15 +0000305
306/*-----------------------------------------------------------------------
307 * PCMCIA stuff
308 *-----------------------------------------------------------------------
309 *
310 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200311#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
312#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
313#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
314#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
315#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
316#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
317#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
318#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
wdenkf4675562002-10-02 14:20:15 +0000319
320/*-----------------------------------------------------------------------
321 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
322 *-----------------------------------------------------------------------
323 */
324
325#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
326
327#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
328#undef CONFIG_IDE_LED /* LED for ide not supported */
329#undef CONFIG_IDE_RESET /* reset for ide not supported */
330
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200331#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
332#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
wdenkf4675562002-10-02 14:20:15 +0000333
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200334#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
wdenkf4675562002-10-02 14:20:15 +0000335
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200336#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
wdenkf4675562002-10-02 14:20:15 +0000337
338/* Offset for data I/O */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200339#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenkf4675562002-10-02 14:20:15 +0000340
341/* Offset for normal register accesses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200342#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenkf4675562002-10-02 14:20:15 +0000343
344/* Offset for alternate registers */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200345#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
wdenkf4675562002-10-02 14:20:15 +0000346
wdenkf4675562002-10-02 14:20:15 +0000347/*-----------------------------------------------------------------------
348 *
349 *-----------------------------------------------------------------------
350 *
351 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200352#define CONFIG_SYS_DER 0
wdenkf4675562002-10-02 14:20:15 +0000353
354/*
355 * Init Memory Controller:
356 *
357 * BR0/1 and OR0/1 (FLASH)
358 */
359
360#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
361#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
362
363/* used to re-map FLASH both when starting from SRAM or FLASH:
364 * restrict access enough to keep SRAM working (if any)
365 * but not too much to meddle with FLASH accesses
366 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200367#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
368#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
wdenkf4675562002-10-02 14:20:15 +0000369
370/*
371 * FLASH timing:
372 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200373#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
wdenkf4675562002-10-02 14:20:15 +0000374 OR_SCY_3_CLK | OR_EHTR | OR_BI)
wdenkf4675562002-10-02 14:20:15 +0000375
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200376#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
377#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
378#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
wdenkf4675562002-10-02 14:20:15 +0000379
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200380#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
381#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
382#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
wdenkf4675562002-10-02 14:20:15 +0000383
384/*
385 * BR2/3 and OR2/3 (SDRAM)
386 *
387 */
388#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
389#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
390#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
391
392/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200393#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
wdenkf4675562002-10-02 14:20:15 +0000394
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200395#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
396#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenkf4675562002-10-02 14:20:15 +0000397
398#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200399#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
400#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenkf4675562002-10-02 14:20:15 +0000401#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200402#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
403#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
404#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
405#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
wdenkf4675562002-10-02 14:20:15 +0000406 BR_PS_8 | BR_MS_UPMB | BR_V )
407#endif /* CONFIG_CAN_DRIVER */
408
409/*
410 * Memory Periodic Timer Prescaler
411 *
412 * The Divider for PTA (refresh timer) configuration is based on an
413 * example SDRAM configuration (64 MBit, one bank). The adjustment to
414 * the number of chip selects (NCS) and the actually needed refresh
415 * rate is done by setting MPTPR.
416 *
417 * PTA is calculated from
418 * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
419 *
420 * gclk CPU clock (not bus clock!)
421 * Trefresh Refresh cycle * 4 (four word bursts used)
422 *
423 * 4096 Rows from SDRAM example configuration
424 * 1000 factor s -> ms
425 * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
426 * 4 Number of refresh cycles per period
427 * 64 Refresh cycle in ms per number of rows
428 * --------------------------------------------
429 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
430 *
431 * 50 MHz => 50.000.000 / Divider = 98
432 * 66 Mhz => 66.000.000 / Divider = 129
433 * 80 Mhz => 80.000.000 / Divider = 156
434 */
wdenke9132ea2004-04-24 23:23:30 +0000435
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200436#define CONFIG_SYS_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
437#define CONFIG_SYS_MAMR_PTA 98
wdenkf4675562002-10-02 14:20:15 +0000438
439/*
440 * For 16 MBit, refresh rates could be 31.3 us
441 * (= 64 ms / 2K = 125 / quad bursts).
442 * For a simpler initialization, 15.6 us is used instead.
443 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200444 * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
445 * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
wdenkf4675562002-10-02 14:20:15 +0000446 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200447#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
448#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
wdenkf4675562002-10-02 14:20:15 +0000449
450/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200451#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
452#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
wdenkf4675562002-10-02 14:20:15 +0000453
454/*
455 * MAMR settings for SDRAM
456 */
457
458/* 8 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200459#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenkf4675562002-10-02 14:20:15 +0000460 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
461 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
462/* 9 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200463#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenkf4675562002-10-02 14:20:15 +0000464 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
465 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
466
467
468/*
469 * Internal Definitions
470 *
471 * Boot Flags
472 */
473#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
474#define BOOTFLAG_WARM 0x02 /* Software reboot */
475
476#endif /* __CONFIG_H */