blob: 21786e1bdfc65dfb4866f044d6757cbac634bba8 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Yuiko Oshinod2c31972017-08-11 12:44:58 -04002/*
3 * Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
Yuiko Oshinod2c31972017-08-11 12:44:58 -04004 */
5
6#include <dm.h>
7#include <malloc.h>
8#include <miiphy.h>
9#include <memalign.h>
10#include <usb.h>
11#include <linux/ethtool.h>
12#include <linux/mii.h>
13#include "usb_ether.h"
14#include "lan7x.h"
15
16/*
17 * Lan7x infrastructure commands
18 */
19int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data)
20{
21 int len;
22 ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1);
23
24 cpu_to_le32s(&data);
25 tmpbuf[0] = data;
26
27 len = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
28 USB_VENDOR_REQUEST_WRITE_REGISTER,
29 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
30 0, index, tmpbuf, sizeof(data),
31 USB_CTRL_SET_TIMEOUT_MS);
32 if (len != sizeof(data)) {
33 debug("%s failed: index=%d, data=%d, len=%d",
34 __func__, index, data, len);
35 return -EIO;
36 }
37 return 0;
38}
39
40int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data)
41{
42 int len;
43 ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1);
44
45 len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
46 USB_VENDOR_REQUEST_READ_REGISTER,
47 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
48 0, index, tmpbuf, sizeof(*data),
49 USB_CTRL_GET_TIMEOUT_MS);
50 *data = tmpbuf[0];
51 if (len != sizeof(*data)) {
52 debug("%s failed: index=%d, len=%d", __func__, index, len);
53 return -EIO;
54 }
55
56 le32_to_cpus(data);
57 return 0;
58}
59
60static int lan7x_phy_wait_not_busy(struct usb_device *udev)
61{
62 return lan7x_wait_for_bit(udev, __func__,
63 MII_ACC, MII_ACC_MII_BUSY,
64 false, 100, 0);
65}
66
67int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx)
68{
69 u32 val, addr;
70
71 /* confirm MII not busy */
72 if (lan7x_phy_wait_not_busy(udev)) {
73 debug("MII is busy in %s\n", __func__);
74 return -ETIMEDOUT;
75 }
76
77 /* set the address, index & direction (read from PHY) */
78 addr = (phy_id << 11) | (idx << 6) |
79 MII_ACC_MII_READ | MII_ACC_MII_BUSY;
80 lan7x_write_reg(udev, MII_ACC, addr);
81
82 if (lan7x_phy_wait_not_busy(udev)) {
83 debug("Timed out reading MII reg %02X\n", idx);
84 return -ETIMEDOUT;
85 }
86
87 lan7x_read_reg(udev, MII_DATA, &val);
88
89 return val & 0xFFFF;
90}
91
92void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx, int regval)
93{
94 u32 addr;
95
96 /* confirm MII not busy */
97 if (lan7x_phy_wait_not_busy(udev)) {
98 debug("MII is busy in %s\n", __func__);
99 return;
100 }
101
102 lan7x_write_reg(udev, MII_DATA, regval);
103
104 /* set the address, index & direction (write to PHY) */
105 addr = (phy_id << 11) | (idx << 6) |
106 MII_ACC_MII_WRITE | MII_ACC_MII_BUSY;
107 lan7x_write_reg(udev, MII_ACC, addr);
108
109 if (lan7x_phy_wait_not_busy(udev))
110 debug("Timed out writing MII reg %02X\n", idx);
111}
112
113/*
114 * Lan7x phylib wrappers
115 */
116static int lan7x_phylib_mdio_read(struct mii_dev *bus,
117 int addr, int devad, int reg)
118{
119 struct usb_device *udev = dev_get_parent_priv(bus->priv);
120
121 return lan7x_mdio_read(udev, addr, reg);
122}
123
124static int lan7x_phylib_mdio_write(struct mii_dev *bus,
125 int addr, int devad, int reg, u16 val)
126{
127 struct usb_device *udev = dev_get_parent_priv(bus->priv);
128
129 lan7x_mdio_write(udev, addr, reg, (int)val);
130
131 return 0;
132}
133
134/*
135 * Lan7x eeprom functions
136 */
137static int lan7x_eeprom_confirm_not_busy(struct usb_device *udev)
138{
139 return lan7x_wait_for_bit(udev, __func__,
140 E2P_CMD, E2P_CMD_EPC_BUSY,
141 false, 100, 0);
142}
143
144static int lan7x_wait_eeprom(struct usb_device *udev)
145{
146 return lan7x_wait_for_bit(udev, __func__,
147 E2P_CMD,
148 (E2P_CMD_EPC_BUSY | E2P_CMD_EPC_TIMEOUT),
149 false, 100, 0);
150}
151
152static int lan7x_read_eeprom(struct usb_device *udev,
153 u32 offset, u32 length, u8 *data)
154{
155 u32 val;
156 int i, ret;
157
158 ret = lan7x_eeprom_confirm_not_busy(udev);
159 if (ret)
160 return ret;
161
162 for (i = 0; i < length; i++) {
163 val = E2P_CMD_EPC_BUSY | E2P_CMD_EPC_CMD_READ |
164 (offset & E2P_CMD_EPC_ADDR_MASK);
165 lan7x_write_reg(udev, E2P_CMD, val);
166
167 ret = lan7x_wait_eeprom(udev);
168 if (ret)
169 return ret;
170
171 lan7x_read_reg(udev, E2P_DATA, &val);
172 data[i] = val & 0xFF;
173 offset++;
174 }
175 return ret;
176}
177
178/*
179 * Lan7x phylib functions
180 */
181int lan7x_phylib_register(struct udevice *udev)
182{
183 struct usb_device *usbdev = dev_get_parent_priv(udev);
184 struct lan7x_private *priv = dev_get_priv(udev);
185 int ret;
186
187 priv->mdiobus = mdio_alloc();
188 if (!priv->mdiobus) {
189 printf("mdio_alloc failed\n");
190 return -ENOMEM;
191 }
192 priv->mdiobus->read = lan7x_phylib_mdio_read;
193 priv->mdiobus->write = lan7x_phylib_mdio_write;
194 sprintf(priv->mdiobus->name,
195 "lan7x_mdiobus-d%hu-p%hu", usbdev->devnum, usbdev->portnr);
196 priv->mdiobus->priv = (void *)udev;
197
198 ret = mdio_register(priv->mdiobus);
199 if (ret) {
200 printf("mdio_register failed\n");
201 free(priv->mdiobus);
202 return -ENOMEM;
203 }
204
205 return 0;
206}
207
208int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev)
209{
210 struct lan7x_private *priv = dev_get_priv(udev);
211
212 priv->phydev = phy_connect(priv->mdiobus, dev->phy_id,
213 udev, PHY_INTERFACE_MODE_MII);
214
215 if (!priv->phydev) {
216 printf("phy_connect failed\n");
217 return -ENODEV;
218 }
219 return 0;
220}
221
222int lan7x_eth_phylib_config_start(struct udevice *udev)
223{
224 struct lan7x_private *priv = dev_get_priv(udev);
225 int ret;
226
227 /* configure supported modes */
228 priv->phydev->supported = PHY_BASIC_FEATURES |
229 SUPPORTED_1000baseT_Full |
230 SUPPORTED_Pause |
231 SUPPORTED_Asym_Pause;
232
233 priv->phydev->advertising = ADVERTISED_10baseT_Half |
234 ADVERTISED_10baseT_Full |
235 ADVERTISED_100baseT_Half |
236 ADVERTISED_100baseT_Full |
237 ADVERTISED_1000baseT_Full |
238 ADVERTISED_Pause |
239 ADVERTISED_Asym_Pause |
240 ADVERTISED_Autoneg;
241
242 priv->phydev->autoneg = AUTONEG_ENABLE;
243
244 ret = genphy_config_aneg(priv->phydev);
245 if (ret) {
246 printf("genphy_config_aneg failed\n");
247 return ret;
248 }
249 ret = phy_startup(priv->phydev);
250 if (ret) {
251 printf("phy_startup failed\n");
252 return ret;
253 }
254
255 debug("** %s() speed %i duplex %i adv %X supp %X\n", __func__,
256 priv->phydev->speed, priv->phydev->duplex,
257 priv->phydev->advertising, priv->phydev->supported);
258
259 return 0;
260}
261
262int lan7x_update_flowcontrol(struct usb_device *udev,
263 struct ueth_data *dev,
264 uint32_t *flow, uint32_t *fct_flow)
265{
266 uint32_t lcladv, rmtadv;
267 u8 cap = 0;
268 struct lan7x_private *priv = dev_get_priv(udev->dev);
269
270 debug("** %s()\n", __func__);
271 debug("** %s() priv->phydev->speed %i duplex %i\n", __func__,
272 priv->phydev->speed, priv->phydev->duplex);
273
274 if (priv->phydev->duplex == DUPLEX_FULL) {
275 lcladv = lan7x_mdio_read(udev, dev->phy_id, MII_ADVERTISE);
276 rmtadv = lan7x_mdio_read(udev, dev->phy_id, MII_LPA);
277 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
278
279 debug("TX Flow ");
280 if (cap & FLOW_CTRL_TX) {
281 *flow = (FLOW_CR_TX_FCEN | 0xFFFF);
282 /* set fct_flow thresholds to 20% and 80% */
283 *fct_flow = ((MAX_RX_FIFO_SIZE * 2) / (10 * 512))
284 & 0x7FUL;
285 *fct_flow <<= 8UL;
286 *fct_flow |= ((MAX_RX_FIFO_SIZE * 8) / (10 * 512))
287 & 0x7FUL;
288 debug("EN ");
289 } else {
290 debug("DIS ");
291 }
292 debug("RX Flow ");
293 if (cap & FLOW_CTRL_RX) {
294 *flow |= FLOW_CR_RX_FCEN;
295 debug("EN");
296 } else {
297 debug("DIS");
298 }
299 }
300 debug("\n");
301 return 0;
302}
303
304int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev)
305{
306 int ret;
307
308 memset(enetaddr, 0, 6);
309
310 ret = lan7x_read_eeprom(udev, 0, 1, enetaddr);
311
312 if ((ret == 0) && (enetaddr[0] == EEPROM_INDICATOR)) {
313 ret = lan7x_read_eeprom(udev,
314 EEPROM_MAC_OFFSET, ETH_ALEN,
315 enetaddr);
316 if ((ret == 0) && is_valid_ethaddr(enetaddr)) {
317 /* eeprom values are valid so use them */
318 debug("MAC address read from EEPROM %pM\n",
319 enetaddr);
320 return 0;
321 }
322 }
323 debug("MAC address read from EEPROM invalid %pM\n", enetaddr);
324
325 memset(enetaddr, 0, 6);
326 return -EINVAL;
327}
328
329int lan7x_pmt_phy_reset(struct usb_device *udev,
330 struct ueth_data *dev)
331{
332 int ret;
333 u32 data;
334
335 ret = lan7x_read_reg(udev, PMT_CTL, &data);
336 if (ret)
337 return ret;
338 ret = lan7x_write_reg(udev, PMT_CTL, data | PMT_CTL_PHY_RST);
339 if (ret)
340 return ret;
341
342 /* for LAN7x, we need to check PMT_CTL_READY asserted */
343 ret = lan7x_wait_for_bit(udev, "PMT_CTL_PHY_RST",
344 PMT_CTL, PMT_CTL_PHY_RST,
345 false, 1000, 0); /* could take over 125mS */
346 if (ret)
347 return ret;
348
349 return lan7x_wait_for_bit(udev, "PMT_CTL_READY",
350 PMT_CTL, PMT_CTL_READY,
351 true, 1000, 0);
352}
353
354int lan7x_basic_reset(struct usb_device *udev,
355 struct ueth_data *dev)
356{
357 int ret;
358
359 dev->phy_id = LAN7X_INTERNAL_PHY_ID; /* fixed phy id */
360
361 ret = lan7x_write_reg(udev, HW_CFG, HW_CFG_LRST);
362 if (ret)
363 return ret;
364
365 ret = lan7x_wait_for_bit(udev, "HW_CFG_LRST",
366 HW_CFG, HW_CFG_LRST,
367 false, 1000, 0);
368 if (ret)
369 return ret;
370
371 debug("USB devnum %d portnr %d\n", udev->devnum, udev->portnr);
372
373 return lan7x_pmt_phy_reset(udev, dev);
374}
375
376void lan7x_eth_stop(struct udevice *dev)
377{
378 debug("** %s()\n", __func__);
379}
380
381int lan7x_eth_send(struct udevice *dev, void *packet, int length)
382{
383 struct lan7x_private *priv = dev_get_priv(dev);
384 struct ueth_data *ueth = &priv->ueth;
385 int err;
386 int actual_len;
387 u32 tx_cmd_a;
388 u32 tx_cmd_b;
389 ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg,
390 PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b));
391
392 debug("** %s(), len %d, buf %#x\n", __func__, length,
393 (unsigned int)(ulong) msg);
394 if (length > PKTSIZE)
395 return -ENOSPC;
396
397 /* LAN7x disable all TX offload features for u-boot */
398 tx_cmd_a = (u32) (length & TX_CMD_A_LEN_MASK) | TX_CMD_A_FCS;
399 tx_cmd_b = 0;
400 cpu_to_le32s(&tx_cmd_a);
401 cpu_to_le32s(&tx_cmd_b);
402
403 /* prepend cmd_a and cmd_b */
404 memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a));
405 memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b));
406 memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet,
407 length);
408 err = usb_bulk_msg(ueth->pusb_dev,
409 usb_sndbulkpipe(ueth->pusb_dev, ueth->ep_out),
410 (void *)msg,
411 length + sizeof(tx_cmd_a) +
412 sizeof(tx_cmd_b),
413 &actual_len, USB_BULK_SEND_TIMEOUT_MS);
414 debug("Tx: len = %u, actual = %u, err = %d\n",
415 (unsigned int)(length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)),
416 (unsigned int)actual_len, err);
417
418 return err;
419}
420
421int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp)
422{
423 struct lan7x_private *priv = dev_get_priv(dev);
424 struct ueth_data *ueth = &priv->ueth;
425 uint8_t *ptr;
426 int ret, len;
427 u32 packet_len = 0;
428 u32 rx_cmd_a = 0;
429
430 len = usb_ether_get_rx_bytes(ueth, &ptr);
431 debug("%s: first try, len=%d\n", __func__, len);
432 if (!len) {
433 if (!(flags & ETH_RECV_CHECK_DEVICE))
434 return -EAGAIN;
435 ret = usb_ether_receive(ueth, RX_URB_SIZE);
436 if (ret == -EAGAIN)
437 return ret;
438
439 len = usb_ether_get_rx_bytes(ueth, &ptr);
440 debug("%s: second try, len=%d\n", __func__, len);
441 }
442
443 /*
444 * 1st 4 bytes contain the length of the actual data plus error info.
445 * Extract data length.
446 */
447 if (len < sizeof(packet_len)) {
448 debug("Rx: incomplete packet length\n");
449 goto err;
450 }
451 memcpy(&rx_cmd_a, ptr, sizeof(rx_cmd_a));
452 le32_to_cpus(&rx_cmd_a);
453 if (rx_cmd_a & RX_CMD_A_RXE) {
454 debug("Rx: Error header=%#x", rx_cmd_a);
455 goto err;
456 }
457 packet_len = (u16) (rx_cmd_a & RX_CMD_A_LEN_MASK);
458
459 if (packet_len > len - sizeof(packet_len)) {
460 debug("Rx: too large packet: %d\n", packet_len);
461 goto err;
462 }
463
464 /*
465 * For LAN7x, the length in command A does not
466 * include command A, B, and C length.
467 * So use it as is.
468 */
469
470 *packetp = ptr + 10;
471 return packet_len;
472
473err:
474 usb_ether_advance_rxbuf(ueth, -1);
475 return -EINVAL;
476}
477
478int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len)
479{
480 struct lan7x_private *priv = dev_get_priv(dev);
481
482 packet_len = ALIGN(packet_len, 4);
483 usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len);
484
485 return 0;
486}
487
488int lan7x_eth_remove(struct udevice *dev)
489{
490 struct lan7x_private *priv = dev_get_priv(dev);
491
492 debug("** %s()\n", __func__);
493 free(priv->phydev);
494 mdio_unregister(priv->mdiobus);
495 mdio_free(priv->mdiobus);
496
497 return 0;
498}