blob: 65b844e5d07d71b3b3ca06f222a368b443a01f09 [file] [log] [blame]
Hou Zhiqiangec70ced2019-08-20 09:35:28 +00001// SPDX-License-Identifier: GPL-2.0+ OR X11
2/*
3 * P1020 Silicon/SoC Device Tree Source (post include)
4 *
5 * Copyright 2013 Freescale Semiconductor Inc.
6 * Copyright 2019 NXP
7 */
8
9&soc {
10 #address-cells = <1>;
11 #size-cells = <1>;
12 device_type = "soc";
13 compatible = "fsl,p1020-immr", "simple-bus";
14 bus-frequency = <0x0>;
15
Ran Wangac02a942019-12-12 17:30:53 +080016 usb@22000 {
17 compatible = "fsl-usb2-dr";
18 reg = <0x22000 0x1000>;
19 phy_type = "ulpi";
20 };
21
22 usb@23000 {
23 compatible = "fsl-usb2-dr";
24 reg = <0x23000 0x1000>;
25 phy_type = "ulpi";
26 };
27
Hou Zhiqiangec70ced2019-08-20 09:35:28 +000028 mpic: pic@40000 {
29 interrupt-controller;
30 #address-cells = <0>;
31 #interrupt-cells = <4>;
32 reg = <0x40000 0x40000>;
33 compatible = "fsl,mpic";
34 device_type = "open-pic";
35 big-endian;
36 single-cpu-affinity;
37 last-interrupt-source = <255>;
38 };
Yinbo Zhub73d5372019-10-15 17:20:40 +080039
40 esdhc: esdhc@2e000 {
41 compatible = "fsl,esdhc";
42 reg = <0x2e000 0x1000>;
43 /* Filled in by U-Boot */
44 clock-frequency = <0>;
45 };
Ran Wangac02a942019-12-12 17:30:53 +080046
Xiaowei Bao42896372020-06-04 23:16:34 +080047 espi0: spi@7000 {
48 compatible = "fsl,mpc8536-espi";
49 #address-cells = <1>;
50 #size-cells = <0>;
51 reg = <0x7000 0x1000>;
52 fsl,espi-num-chipselects = <4>;
53 status = "disabled";
54 };
55
Biwen Li74014df2020-05-01 20:04:01 +080056 /include/ "pq3-i2c-0.dtsi"
57 /include/ "pq3-i2c-1.dtsi"
Hou Zhiqiangec70ced2019-08-20 09:35:28 +000058};
Hou Zhiqiang594708d2019-08-27 11:04:04 +000059
60/* PCIe controller base address 0x9000 */
61&pci1 {
62 compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq";
63 law_trgt_if = <1>;
64 #address-cells = <3>;
65 #size-cells = <2>;
66 device_type = "pci";
67 bus-range = <0x0 0xff>;
68};
69
70/* PCIe controller base address 0xa000 */
71&pci0 {
72 compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq";
73 law_trgt_if = <2>;
74 #address-cells = <3>;
75 #size-cells = <2>;
76 device_type = "pci";
77 bus-range = <0x0 0xff>;
78};